Mac os x tiger 10.4.11

Estou tentando conectar este computador à internet conexão a cabo
Contudo, a mesma não funciona. Clicando em Preferência de Rede, aparece uma janela informando que "meus ajustes de rede foram alterados por outro aplicativo"; clico em "ok" e a janela não fecha. Examinei todo o computador e nada achei
Tentei o suporte da Apple, mas ninguém sabe resolver o problema.
Alguma dica?

Limnos always offers good sound advice!
Might give a try with Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
As long as you don't have a USB connection in tandem with a Universal Power Supply, which can cause problems. Unplug the USB cable if you do.

Similar Messages

Help installing mac os x tiger

so i installed disc one of mac os x tiger on my macbook, and when it asks for disc two and i insert it, it loads all the way, then when my computer is turning on it goes back to the beginning of the install and keeps repeating the process. please help !

Hi,
See this Current Discussion... BD Aqua Post...
https://discussions.apple.com/message/15909783#15909783
Cheers,

TROUBLE with Mac OS X Tiger install on G4 iMac 1.25 GHz

Trying to install retail copy of Mac OS X Tiger 10.4 onto an iMac G4 1.25 GHz running OS X 10.3.9. The DVD shows up on the desktop when inserted, but after clicking install and waiting for the reboot, the system just loads OS X 10.3.9 and NOT the 10.4 setup.
Inserting the CD and holding "C" during startup yields the blinking system folder with the question mark.
Apparently no firmware updates are needed and the iMac meets the requirements. Any ideas, suggestions, or workarounds are much appreciated.
I also have a MacBook Pro (Intel, of course), and was wondering if there was any way to use it to install the PPC version of 10.4 on the iMac. (Can I boot the iMac as target disk mode on my MBP and install the PPC version of Tiger onto it that way? I don't know if that will work with the intel/ppc hiccup.)
Someone please tell me how to get this working!

Yes, unless you have the original install disks that came with the computer ( with iLife included) you will have to buy iLife. However, iLife 11 requires an intel processor and snow leopard. If you don't meet those requirements you should try to find an older version. ( usually you can find something on amazon.com)
David

Mac OS X Tiger installation quiz!

All,
I got a resetting message with my PowerBook G4 12" and rebooted sevearal times but the message kept coming again. I decided to do the following steps:
a. run a hardware test and it passed complete one
b. re-install the Mac OS X Panther with the install CD after erase and format my HD
c. re-install the Mac OS X Tiger with the CD came with the book.
d. the resetting message with four different languages still showed up when I tried to reboot system every time. I surely can try the safe boot but how I can get my Powerbook back to normal? Should I send it back to Apple center for repair?
Thanks,

Just why were you wanting to install Panther if Tiger came with your machine?
Unless the Panther installer is the retail version there are any number of problems trying to install an OS from a restore disc from another machine. It just does not generally work.
The restore disc(s) that came with your machine are what I would suggest you use to attempt a clean installation. It would be a good idea to initialize (format) the drive (and would not hurt to "zero" it) to get the remnants of anything that might cause a problem off of it.
Is your machine still under warranty? If doing the above does not straighten things out it would probably be best to call AppleCare and see just what they want to do.
Good Luck

Can I upgrade my PowerBook G4 from Mac OS X Tiger to Snow Leopard?

I am running Mac OS X Tiger 10.4.11 on my PowerBook G4. Can I upgrade to v10.6 Snow Leopard? Just asking because I never upgraded to v10.5 Leopard. Are there any adverse impacts of doing this for my PowerBook G4?

Hi jjhron;
As Stedman says you can't go to Snow Leopard with your G4 PowerBook but if your PB meets the specs for Leopard you can upgrade to that instead.
Allan

Can I install Mac OS X Tiger 10.4 on a dell Optiplex Gx280?

Hi! I have a couple of questions which I can't seem to find the answers too.
1) Can I install Mac OS X Tiger 10.4 on a Dell Optiplex GX280?
2) Can I take the HDD from the aforementioned Dell and place it in my Power Mac G4 Digital Audio? If so, will Tiger still be on it?
3) If I can't install Tiger on my Dell, can I rip the DVD drive out and use that to install?
4) HDD's don't have to be Mac specific, do they?
Thank you for your valuable time,
Obiwan-Kenobi

Can I install Mac OS X Tiger 10.4 on a Dell Optiplex GX280?
10.4.8 has been done:
http://wiki.osx86project.org/wiki/index.php/HCL_10.4.8/Desktops
If you want further info, don't ask here.
Use Google and search terms "Dell Optiplex GX280 hackintosh" to search the x86 sites.

HT3421 I get this error This update requires Mac OS X Tiger 10.4.11 or newer or Mac OS X Leopard version 10.5.6 or newer.

I need to download this: (http://support.apple.com/kb/DL788) because my macbook wont turn on unless its charged. I did all the resets like VPRAM, SMC, and I forgot the other one.
My pack thingy is 0002 and it says that if its 0003 then you dont need the update but I do need the update.
I get this error:
This update requires Mac OS X Tiger 10.4.11 or newer or Mac OS X Leopard version 10.5.6 or newer.
I purchased the battery in December. It worked fine but now its happening again! Please help! Its annoying and the nearest Apple store is 2 hours away!

Please help me!

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Hi, hopefully you guys can help me out, I just
purchased a G5 iMac to replace my aging dell desktop,
and now i'm more or less completely os x dependant
(I've had an ibook for a few months now). Anyway, I
have a few questions:
1. Does anyone know of a (free) mail notifier tool,
that will alert me when I recieve new pop3 mail? I
used to use AIM for this in windows
The built in email program does sound an alert for new messages.
2. Anyone know of a good (free, again) IRC client?
iChat works well.
3. I noticed earlier that my screen was flickering,
it seems to have subsided for now, but is that normal
to encounter in a new display? It wasn't really bad
flicker, but I could see it.
No idea.
4. I leave my desktops on 24/7x365, will that be a
problem with this iMac? Display shuts off of course
after 30 mins
You could set the iMac to go to sleep after non use. My Macs are
always sleeping when not in use, waking them up takes seconds.
Unlike windoze, never knew if it would be locked up or not.
5. Should I get the extended warranty? I'm usually
against them, but I am expecting this computer to
last me at least 3 years (for $1300 it better!)
before I upgrade, as I got that much out of a Dell
and from what I understand, Mac's do not age nearly
as fast as Windows pc's.
It is well worth the cost. Never know what might happen. Also
it is good insurance for future upgrades. I traded in my G4 tower
purchased two years ago for 75% of what I paid for it. Apple care
transfers, giving the buyer the remainder of your warranty.
Thank you for any help,
-Evan

Where do I purchase single user copy of Intel build Mac OS X Tiger?

Hi,
I am planning to reinstall my intel Macbook pro, and I bought a copy of Mac OS X tiger from campus store today.
I did not mention that I have needed an intel build, thought Apple would put intel and powerpc build together.
Obviously I was wrong. The one they gave me is for build for powerpc only, would not work on my mac, neither can not startup from boot.
The disc is issued under label: MA453Z/A.
Before I go to the store tomorrow, I checked the online store and they only sell powerpc build version(MA453Z/A). Where can I purchase Intel based single user Tiger copy?
thanks
Yudi
Mac Book Pro 17 inch CD Mac OS X (10.4.8)

Apple doesn't produce/sell a Universal Tiger retail install package since Tiger has shipped pre-installed with all Intel Macs.
You need to contact Apple/Apple Care to request a replacement install package for your Mac model and build which will also include all additional software included with your Mac purchase which is not included with a Tiger retail install package. And keep this copy in a safe place this time.
The Leopard retail install package will be produced/sold as Universal since Universal will be required.

Persistent IP Routes in Mac OS X Tiger

Hello
I have a mac book Pro 10.4.8. I try to add static Routes, i was following this post
http://www.webboise.com/persistent-ip-routes-in-mac-os-x-tiger/
My problem is when after the reboot the rootes was deleted. I must launch directly the script on the Terminal
sudo SystemStarter start PersistentRoutes
Can you help Me ?
Thans You

to have the EXACT same name as the directory, so
/Library/StartupItems/static-routes/static-routes has
to have the same case sensitive name as
/Library/StartupItems/static-routes/ .
pc-mq-dsi3:~ root# ls -l /Library/StartupItems/
total 0
drwxr-xr-x 4 root wheel 136 Oct 15 13:17 CoreDuoTemp
drwxr-xr-x 4 root wheel 136 Jan 13 2005 OpenBase
drwxr-xr-x 4 root wheel 136 Dec 27 11:41 PersistentRoutes
pc-mq-dsi3:~ root# ls -l /Library/StartupItems/PersistentRoutes/
total 16
-rwxr-xr-x 1 root wheel 252 Dec 27 11:51 PersistentRoutes
-rwxr-xr-x 1 root wheel 501 Aug 24 00:52 StartupParameters.plist
pc-mq-dsi3:~ root#
it's correct ?
The script will be called with an argument of start,
so I'd recommend keeping the . /etc/rc.common command
and the StartService() framework.
pc-mq-dsi3:~ root# cat /Library/StartupItems/PersistentRoutes/PersistentRoutes
#!/bin/sh
. /etc/rc.common
ConsoleMessage "Adding Persistent IP Routes"
/sbin/route add 192.168.2.0/24 192.168.1.252
/sbin/route add 192.168.5.0/24 192.168.1.253
/sbin/route add 192.168.6.0/24 192.168.1.252
/sbin/route add 192.168.7.0/24 192.168.1.252
pc-mq-dsi3:~ root#
Always correct ?
The StartupParameters.plist file is a text file
rw-r--r-- (chmod 0644 StartupParameters.plist). It's
bracketed by { and }. The only two lines in mine
that look important are:
pc-mq-dsi3:~ root# cat /Library/StartupItems/PersistentRoutes/StartupParameters
.plist
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Description</key>
<string>Persistent Routes for VPN Tunnels</string>
<key>OrderPreference</key>
<string>Last</string>
<key>Provides</key>
<array>
<string>PersistentRoutes</string>
</array>
<key>Uses</key>
<array>
<string>Network</string>
<string>NetworkExtensions</string>
</array>
</dict>
</plist>
Mine is correct ?
If this stuff doesn't take care of it, could you post
the results of:
ls -l /Library/StartupItems | egrep static-routes
ls -l /Library/StartupItems/static-routes
cat
/Library/StartupItems/static-routes/static-routes
cat
/Library/StartupItems/static-routes/StartupParameters.
plist
pc-mq-dsi3:~ root# ls -l /Library/StartupItems | egrep PersistentRoutes
drwxr-xr-x 4 root wheel 136 Dec 27 11:41 PersistentRoutes
pc-mq-dsi3:~ root# ls -l /Library/StartupItems/PersistentRoutes/
total 16
-rwxr-xr-x 1 root wheel 252 Dec 27 11:51 PersistentRoutes
-rw-r--r-- 1 root wheel 501 Aug 24 00:52 StartupParameters.plist
pc-mq-dsi3:~ root# cat /Library/StartupItems/PersistentRoutes/StartupParameters
.plist
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Description</key>
<string>Persistent Routes for VPN Tunnels</string>
<key>OrderPreference</key>
<string>Last</string>
<key>Provides</key>
<array>
<string>PersistentRoutes</string>
</array>
<key>Uses</key>
<array>
<string>Network</string>
<string>NetworkExtensions</string>
</array>
</dict>
</plist>
pc-mq-dsi3:~ root# cat /Library/StartupItems/PersistentRoutes/PersistentRoutes
#!/bin/sh
. /etc/rc.common
ConsoleMessage "Adding Persistent IP Routes"
/sbin/route add 192.168.2.0/24 192.168.1.252
/sbin/route add 192.168.5.0/24 192.168.1.253
/sbin/route add 192.168.6.0/24 192.168.1.252
/sbin/route add 192.168.7.0/24 192.168.1.252
Thanks for your help
Bolo

I need help installing mac os x tiger, disc 2

my macbook successfully installed disc 1 of mac os x tiger, within minutes, however when it asks for me to insert disc 2, and i do so, it almost finishes installing the disc, then an error message pops up, saying "there were errors installing the software, please try installing again" i have repeated this process at least 20 times, and the same thing keeps happening. i can't even use my computer regularly since everytime i open it up this happens! please help!

Hold the Moyse button down to eject Disc #2 while booting up, at the same time hold the Option/alt key down to have the startup manager pop up, insertt Disc #1 & wait For Disc #1 to show as a boot choice.
That second Disc thing happens frequently, the best way around it is to do a Custom install, and eliminate enough Printer Drivers, Languages, Fonts, and Applications you don't need... then it may skip #2 altogether.
http://support.apple.com/kb/HT1442
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214

Will new Intel macs support OSX Tiger?

I work in a testing environment and I need to setup another Tiger computer. We have a few intel macs that have tiger. I need to get another machine and set it up with Tiger. If I purchased a new iMac or mac mini, is there a release of Tiger that will run on these PCs? Also, I have been trying to look for a retail release of Tiger that supports Intel processors. Was a product like this ever shipped?
Thanks.
Kelly

kelly, welcome to Apple Discussions.
Macs can only run an OS version that they shipped with or a higher version. So if you are looking at a new Mac that has Leopard installed, it can't run Tiger. You'll have to buy an older Mac.
You can look at this list of G4 & G5 Mac's specs to find which newest-older model will run on Tiger. http://www.everymac.com/systems/apple/index.html
 Cheers, Tom

Time Capsule with Mac Os X tiger

I have problem seting up my time capsule to my I-Mac operating with Tiger. The wires seemmed to be ok but i think the cofiguration is the problem
Any one can help?

I am also trying to set up my time capsule with my iMac (Mac OS X v10.4.11 Tiger) as well as my new MacBook Pro (Mac OS X v 10.6.2). I think to get the time capsule to work with my iMac, I need to upgrade to Leopard or Snow Leopard?? All the instructions that come with the TC say to use the TC with Time machine I need version 10.5.2 or later. I have set up the TC and am just starting my first back up of my Macbook, which seems to be working ok. My question is, how to get I get a back up going for my iMac without the time machine?? Do I need to go ahead with my first thought and upgrade the iMac to Leopard? Or, would I be able to hook up the TC to my iMac with ethernet cords and keep my macbook wireless to the TC?? I cant seem to find any information on this?
Thanks

Mac OS X Tiger Server - SLOW BOOT

Our XServe runs Mac OS X Tiger Server with an external 800 GB RAID 5 setup. The internal Tiger Server OS resides on the XServe's internal 80 GB hard drive.
The server runs fine after the boot up process. However, when restarting the server for maintenance purposes, the server will sit at the gray screen with the spinning gear for 10 - 30 minutes while the internal 80 GB hard drive runs continuously. I was wondering what processes Mac OS X Server is completing during the startup that makes getting to the log in screen take so long?
Booting the XServe in single user mode is very fast. Booting in Safe Mode (shift key) takes a long time also.
Any insight would be appreciated.

The boot sequence is explained here:
http://developer.apple.com/documentation/MacOSX/Conce
tual/BPSystemStartup/index.html
I did review this material.
To troubleshoot this, check /var/log/system.log.?
(pick the one for the day of the last restart) and
read the messages and note the times of the messages
to see what was happening when. Feel free to post
sections. If that doesn't provide clues, the next
boot hold down the CMD (Apple) and v keys which will
give you a verbose boot (lot's of messages) the last
couple before the wait would be the most
interesting.
As I get some time, I will run the actions described above and report back the results.
I may have jumped a bit because you were saying that
your 80 GB filesystem was on, is the 800GB filesystem
journalled too?
Both the drive units are journalled for this XServe system.

Switching from Windows XP to Mac OS X Tiger on a home built Desktop PC?

I was wondering and I cannot seam to find any topics on it so. I want to know if it is possible to take my Desktop I built mainly for Windows and put Mac OS X Tiger on it?
Desktop Spc's:
Mother Board: Gigabyte Intel Socket 775
Processor: Intel P4 3.4 Mega-Hertz
Front Side Bus: 800 Mega-Hertz
Hard Drive: 40 Gig SATA
Ram: 1 Gig
Video Card: Nvidia 6600GT
I just want to find out if it is possible. I was reading an artical and found out that the Mac OS X Tiger already has many of the things that the new windows vista has. So I thought that I would ask to see if it is possible. Thank you in advanced.

There are plenty of topics on this very question which gets asked fairly often depending on your search criteria.
Short answer is no.
The OS X license agreement provides for installing and using it on a single Apple branded/labeled computer only.
The only way to install Tiger on a PC is via a hack of some sort and even if the hack is successful, very little on your PC would be supported and the overall performance would not be worth the trouble.
> I was reading an artical and found out that the Mac OS X Tiger already has many of the things that the new windows vista has.
What you read is correct and it took Microsoft 5 years to come up with what amounts to a copy of OS X. I read there are 10 separate/different versions of Vista to choose from? How on earth is the average person (or even the above average person) expected to wade through all that confusing mess?
Apple is getting ready to launch a new OS X version called Leopard this spring which will place Windows even father behind.
If you want to run Tiger and Vista, purchase an Intel Mac which gives you the ability to run both operating systems natively on a single computer.

How can I install Mac OS X Snow Leopard on Mac OS X Tiger?

Hello. Can someone tell me how I can install Mac OS X Snow Leopard on Mac OS X Tiger? I have the disk, but when I open the installer, I get a message saying that Snow Leopard could not be installed on my computer and it could only be installed on a Intel-Based Mac. This is a PowerPC Mac, so that makes sense.
So, I'm trying to ask how to make my Mac an Intel-Based Mac so I could install Snow Leopard. Or if I can't do that, I need to know how to install Snow Leopard some other way. Please help.

Just an FYI, the Mac App Store was introduced with Mac OS X 10.6.6. However the rest of what you say is accurate.
10.6.8 is required if you want to upgrade certain Macs beyond 10.7.5 without having to reformat the drive you are installing the operating system on and without having to install some version of 10.7 first.
One can actually install 10.7 or later if you maintain an original copy of the full installer of the operating system in question for your personal use without having to have the prerequisite operating system installed, if the hardware supported it. But that's a discussion for another forum.
For HFTaylor,
Consider buying a used or refurbished Mac with an Intel CPU depending on your needs. Read this tip about the migration of data from PowerPC to Intel before proceeding:
https://discussions.apple.com/docs/DOC-2295
and see this tip about used and refurbished Macs*:
http://www.macmaps.com/usedrefurbished.html
* Links to my pages may give me compensation.

Mac os x tiger 10.4.11

Similar Messages

Maybe you are looking for