Mac OS X Update Combined v. 10.5.6 wouldn't install

I have a MacBookPro Mac OS X 10.5.4 2.5 GHz Intel Core 2 Duo and 2GB 667 Mhz DDR2 SDRAM memory, I installed the update to the Mac OS X Update Combined 10.5.6 version, it worked, I click install in the Software Update app., it tells me to restart, I click "restart now" and so far so good.
The installation begins, and it gets stuck at around 10%. I thought maybe it needed time, so I kept it all night, for about 7 hours, the next morning it was still stuck where i left it, it didn't move a tiny bit. So i'm not sure how to get the installation for my update to work, or where am i going wrong (all the other updates were installed successfully except this one)?
Any suggestions, please.
Mark

I'm left confused by this discussion... and, I would hate to add to the confusion of others. But here is my problem: If you've downloaded the combo update from the Apple website, there is no need to utilize Software Update to install the program!
Software Update is useful only to the extent that it can alert you to the existence of an available update. It is up to you whether you wish to proceed with the update (via Software Update). My preference, however, is to do as you have done: download the Combo (if available) update from Apple website, then restart your Mac in Safe Boot and install the dmg/pkg that you now have waiting in your "downloads" folder.
Keith

Similar Messages

The update "Mac OS X update combined (powerpc)" can't be installed?

I recently upgraded from OS X 10.3.9 to Tiger (10.4.6) and encountered a weird problem. My system is a Dual 1GHz G4 (mirror drive door) with 768 MB RAM.
When I try to launch iTunes, I get an error telling me that "iTunes requires Mac OS X 10.4.7 or later..."
That never happened before, so I assume that the Tiger installation (or a Software Update I was unaware of) sabotaged iTunes by imposing this new requirement.
Now here's the irony: I can't install OS X 10.4.7! When I run Software Update, it tries to install Mac OS X Update Combined (PowerPC) 10.4.10-- but it fails every time with the message:
The update "Mac OS X update combined (powerpc)" can't be installed.
The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by "Apple."
So this seems to be a transmission error, or something wrong with Apple's server. I've tried this repeatedly over the last few days, but nothing changes.
Any suggestions? I tried downloading the installer from Apple's download page, but it results in the same error. Is there perhaps a clean version of 10.4.8 I can download from somewhere?
It's really frustrating not being able to run iTunes because of an OS "upgrade."

Then, stop using Software Update, click the Downloads link at the page's top, and manually download the COMBO update. As for iTunes, apparently you installed a later version. With 10.4.6, your quite a few updates behind: OS, security, iTunes, and QuickTime, just to name a few. Before you update, be sure you make a bootable backup/clone. Details for doing that are in these:
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html

The update "Mac OS X Update Combined" can't be saved.

A few days ago my mac ( late 2009 model MacBook pro running lion 10.7.2 ) started freezing, a lot. The freezing seemed to be a problem with osx itself rather than with any particular program. So I initiated software update hoping that there would be an osx update. Low and behold, there was.
Here is the problem.... I can't get it. I have tried twice and both times I get this message
"The update “Mac OS X Update Combined” can’t be saved.
The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs."
Any ideas?

Ok this problem has developed somewhat.
My machine has gone from bad freezing spells to being downright broken.
I rebooted the machine and got stuck at login screen.
Rebooted again and didn't get to login screen.
Rebooted again and got logged in but my desktop was unresponsive and then started flashing between the desktop image and a plain grey screen. I did this literally all night (left it over night).
So today I have booted up from an install of lion I have on an external FireWire drive. And all is well. I am trying to backup things like my photo library and other documents so that I can format the internal hard drive and and do a clean install.
I can access the hard drive, see all the files, but when trying to copy it over I get an error message saying
"the finder can't complete the operation because some data in "iPhoto library" can't be read or written ( error code -36 )
Now before anyone screams broken hard drive, the data can be read, because I can view it all in finder. Just can't copy it out to an external drive.
Please help!!
Oh ps. Before booting from the external I created a new admin account on my machine and booted int that. The freezing problem was the same as in my normal account.

I am upgrading from Tiger to Snow Leopard. I keep getting an error when I try to load the Mac Os x update combined. It says that it was corrupted during download. Have try loading from Apple website V10.6.7 upgrade combined but it still won't do it?

I have an Intel Desktop iMac and I am upgrading from Tiger to Snow Leopard. I keep getting an error when it tries to load the Mac OS X update combined. It says that it was corrupted during download. Have try loading from Apple website Mac OS X V10.6.7 upgrade combined but it still won't do it? Any other suggestions. The printer is not working either - I am not sure if they are connected. Everything else is fine.

Please excuse, but I have to ask an obvious question: Did you already update using the Snow Leopard Retail install DVD? (You must do this first; 10.6.7 is just an update if you already have 10.6.) Are you, then, trying to update from whatever version was on the install DVD to 10.6.7?
Otherwise, I'd keep trying. The 10.6.7 Combo is a huge update.

How do I remove Mac OS X Update Combined?

After updating to 10.6.8 I began having problems. One with my NVIDIA driver (9400M). So I installed the current update from the NVIDIA site. That didnt seem to solve the problem. Unable to revert to my former setting I tried to re-install 10.6.8 in an attempt to restore my driver. After downloading the Mac OS X Update Combined the colors on my screen were slightly out of hue, the mouse was flickering once it entered the dock, and a game I frequently play, World of Warcraft, would no longer run. How do I remove the Combined update or restore my setting? No I do not have the Installation disc, the store where I purchased my Mac Book Pro did not supply me with one. Im begging for the communities help, I need a solution to this.

Since this update and my browsing went down the sink, it takes any page 30 second to load, either on Safari Firefox or Crome. My IMac is the only computer affected so I know it is not network or ISP issue.
I hope there is away to revert it, I'd hate to reformat because of an update, and still there is no guarantee this problem wont happen again after reformating and installing the OS again and do the update
Is it time to start worring from the Mac updates not from Viruses?

My computer got corrupted when I tried to install the Mac OS X update combined

When I tried to download 5 new updates the download could not be completed it got stuck on the Mac OS X update combined. I have the snow leopard and was advised to reinstall the operating system. Can I do this without loosing what I have? Is there something else that I can do?

You can reinstall Snow Leopard without erasing the disk but hopefully you have a backup of your important files just in case.
Mac OS X 10.6 Help: Reinstalling Mac OS X
Can I do this without loosing what I have?
No guarantees, sorry.
Backup < most important term in computing.

HELP: The update "Mac OS X Update Combined" can't be saved error -1001

I have a Mac Mini at a vacation town home, so it needs quite a few updates whenever I use it. Everything installed fine except a combined 10.5.6 and 10.5.7 update. Everytime I attempt to download/install it, it will download a few mbs, then stop and give me the error:
*The update “Mac OS X Update Combined” can’t be saved.*
A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again.
My internet never seems to have conked out, as the 'ready' light on my modem is always lit, so where is the problem here?
Thanks in advance for the help.

Download it directly from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1057comboupdate .html

Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirement for this update?

Hello everyone,
I just purchased MBP 2.6 Ghz running Lion 10.7.3 and I am trying to install the Combo Update 10.7.4.
After I launch the installer at the Destination Select step I get this message:
Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirement for this update.
The sharing and permission on Macintosh HD are "Read & Write" for system, wheel and everyone.
Please Help
Thanks

Welcome to Apple Communities
If it's a new MacBook Pro (2012), you have to update in  > Software Update. They need a special version

I can't install Mac Os X Update combined 10.6.8

I can download Mac Os X Update combined 10.6.8, but when I restart to install the update, the message, "The update could not be expanded, and may have been corrupted during downloading.The update will be downloaded and checked again the next time that Software Update runs" comes up. I'm using a MacBook btw. Please help me solve this, thank you!

Atouraya wrote:
Will do. But, I noticed something. It says the file size is 1.09 GB, but when I download it, it shows a total of 1.01 GB. Is it supposed to be like that?
I just downloaded the update on a PC I'm using at the moment and the size is 1,087,020,133 bytes. You can use "Get Info" to see the actual size of the file on your Mac. If it is the same size then it probably means that there is a problem with the update being applied to your Mac. If it isn't the same size, that doesn't necessarily mean you have a bad download. If it isn't the same size, try using Chrome, Firefox, and/or Opera to download the update.
BTW, Austin Kinsella might be really asking if you have enough free space for such a large download. And even if you do for the file, the update process will require some more while it is running and for the resulting, hopefully, 10.6.8 on your Mac.
Good luck.

Tried to install Mountain Lion and it comes up with the following message Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update. My laptop is using 10.7.3

Tried to install Mountain Lion and it comes up with the following message Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update. My laptop is using 10.7.3

Go to  > Software Update and install updates. Finally, go to App Store, buy Mountain Lion and install. Open > http://www.apple.com/osx/specs/

Mac OS X Update combined will not load

i have loaded snow leopard but Mac OS X Update combined will not load

What happens when you try to install the OS X Combo update? Also, what Mac OS X version are you trying to update to? Do you get any error message? If you see an error message, copy it here

Can't install Mac OS X Update Combined

I have been trying to install this for a few weeks. I get an error during installation. It downloaded fine but every time I try to install it I get an error. I even tried to download and install it from the apple website. It says "You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update."
Can anyone help me here?

I am running 10.5.4.
The update comes up as "Mac OS X Update Combined".
Has the following information:
The 10.5.8 Update is recommended for all users running Mac OS X Leopard and includes general operating system fixes that enhance the stability, compatibility and security of your Mac, as well as specific fixes for:
compatibility and reliability issues when joining AirPort networks.
an issue that could cause some monitor resolutions to no longer appear in Displays System Preferences.
issues that may affect Bluetooth reliability.
For detailed information on this update, please visit this website: http://support.apple.com/kb/HT3606.
For information on the security content of this update, please visit: http://support.apple.com/kb/HT1222.

You cannot install mac os x update combined on this volume

Hi all,
I need your precious help. I have install in my imac leopard 10.5.7 and last night I tried to update for 10.5.8, however the software update didn't identify the new update.
After that I download the update from Apple website but I couldn't do the update because of this message: "you cannot install mac os x update combined on this volume. This volume does not meet the requirements for update".
Could you please help me?
Thanks,
lG

lgcustodio wrote:
I ran the disk utility and saws verify disk ok. I did the same process for repair disk permissions and seems to have problems.
These warnings are accurate but according to Apple can safely be ignored. See Mac OS X 10.5: Disk Utility's Repair Disk Permissions messages that you can safely ignore. IOW, They are not normally problems.
I check the volume scheme but I don't have any partition
You do have partitions & a partition scheme. To check what the scheme is, click on +the drive itself+ in the list on the left in Disk Utility. It will probably be identified as "298,1 GB WDC WD3200AAJS-40VWA0 Media" or something very similar. If it contains the startup disk, it will be the first item in the list. It will have one or more named volumes indented under it, such as "Macintosh HD."
When you have clicked on the WDC drive instead of a volume name indented under it, you should see seven items of information about it at the bottom of Disk Utility's window, to the right of an icon representing the drive. The info is in two columns. The last item in the rightmost column, below the S.M.A.R.T. Status (which should say "Verified"), should be "*Partition Map Scheme :* " & be followed by the scheme type. It should be "GUID Partition Table."
If you don't see the seven info items after selecting the drive, it may indicate a problem that needs attention, but I suspect that you just haven't looked in the right place for the info....
As for the 'cannot install' message, make sure that you have downloaded the right update, that it is not the server update version for example. You may need to download it again, discarding the first download as somehow defective.

HT5167 When I try to install the update"MAC OS X Update Combined, I get a message that says it cannot be saved & connection reset by peer. What do I need to do to get this update installed. I just purchased my first iMAC and don't know anything about it

When I try to install the update"MAC OS X Update Combined, I get a message that says it cannot be saved & connection reset by peer. What do I need to do to get this update installed. I just purchased my first iMAC and don't know anything about it.

Try here:
http://support.apple.com/kb/DL1524

Installed Snow Leopard OK, but when uploading the Mac os x Update Combined, it would not save. It said it could not connect to update server, but my internet connection is working?

Installed Snow Leopard OK, but when uploading the Mac OS X Update Combined, it would not save. It said it could not connect to update server, but my internet connection is working. Any suggestions on fixing?

Run software up date, write down the update name and version. Go to the Apple site and do a search for the updates one at a time and download them one at a time. Use an ethernet connection, sometimes software update "crushes large updates. I have experienced this before. Hope it helps. ATB

Mac OS X Update Combined v. 10.5.6 wouldn't install

Similar Messages

Maybe you are looking for