Mac OS X v10.7 Lion Itunes errors when trying to upgrade iphone

Trying to update my ipad and iphone to IOS 5. When I try to update I get an error message that my Iphone and/or ipad COULD NOT BE RESTORED. THIS DEVICE ISN"T ELIGIBLE FOR THE REQUESTED BUILD.
Itunes software is updated
This all started when I upgraded my mac to Lion OS X Ver 10.7.2
Need help please

I'm connected through my Sky Wifi, it's extremely quick, and I don't have any problems with it. Yes it asked me for my Account Email, and password as normal, then it did that little annimation where it flys into the Launch Pad, then it's saying "waiting" where it should be saying downloading.

Similar Messages

There is an error when trying to upgrade to Mavericks from OX Lion

There is an error when trying to upgrade to Mavericks from OX Lion

So whenever i click on "free upgrade" ..that message shows up next to it..

When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle, after it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle.
After it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

Hi bahaluly,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
Get help with iOS update and restore errors - Apple Support
Solve network errors
Related errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or "The device isn't eligible for the requested build." These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device.
Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
Cheers,
Mario

HT201210 I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

Well I spoke too soon.
The update was successful, but now I cannot connect to the 3GS data network.
Cannot get email and cannot open a page in Safari.
+"Safari could not open the page because the server stopped responding."+
+"Cannot Get Mail+
+THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
Email and internet work fine on WiFi.........no data using 3GS network.
Looks like I will have to revert back to old OS.

I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

You can also use Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
Direct Download Links for Adobe Software
Are you on a managed network. If yes please refer the Knowledge base article: http://helpx.adobe.com/creative-cloud/help/cc-desktop-download-error.html.
You may even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html.
Kindly follow the very important instructions before download.
It might help you.
Regards
Rajshree

Error when trying to upgrade scsm dw 2012 sp1 to r2

Hello,
when I trying to install scsm 2012 r2 upgrade on my scsm dw server error appears.
does anyone faced and successfully resolved this problem?
regards,
Ilgar
Regards, Ilgar Khalilov.

This issue might happen if you have a space in the DW Management Group name.
Maybe this blog post from Anders Asp is helpful:
Strange error message when trying to upgrade SCSM 2012 Sp1 to SCSM 2012 R2
Andreas Baumgarten | H&D International Group

Error when trying to upgrade Dreamweawer

Getting this log message when trying to upgrade:
Dreamweaver CS5.5 11.5.3 Updater
Installationen misslyckades. Felkod: U44M1P7
please advice

NIcolas, Looks like one of th eupgrde steps failed. You will have to open a tac case here as most likely tac will need to get into expert mode adn make some changes to permit you to complete the install. Matthew

I get a disk error when trying to upgrade to mountain lion on my mac book pro that also runs bootcamp

I recently tried to upgrade my macbook pro OSX to mountain lion via the app store. When it tried to install it gives me a disk error. I have run disk utilities and repaired, verified etc. but it makes no difference. I am running bootcamp as well and have tried to modifiy the partition sizes in disk utilities, but it says for both that they cannot be modified. I can switch my startup disk and reboot in windows, no problem, so getting my files off isnt the issue. I have also tried to recover the hard disk using time machine which i was lucky enough to backup the day before it all went wrong. However, time machine runs fine until it asks me which disk to recover and it gives me an option of the time machine disk or bootcamp, but no option for my mac partition. So, I have tried everything that makes snese, but getting errors with disks lock, cant repartition, disk error needs repair (which i know is not true, its only because of the Mountain Lion OSX that its messed up). Any ideas?

You have some other problem with your boot drive that has corrupted data backed up to the TimeMacine drive.
My advice is to boot into each operating system and manually backup just your Users files each to separate regular external drives (no Timemachine or backup software) and disconnect.
Make a note of any serial numbers, emails, address book contacts, export bookmarks etc. that isn't typically in your users folders data.
You might be able to Winclone 3 the Windows as a whole thing as it's appearing not to have issues but it's your MacintoshHD partition that is so that will have to be rebuilt from scratch.
Most commonly used backup methods
If your OS X parititon doesn't boot, you can use this to recover files.
Create a data recovery/undelete external boot drive
Without any further detail about your machine I can't advise specifically what to do, but it involves using Disk Utility to Zero Erase (move slider one spot to the right or in 10.6 using Security Option) the ENTIRE boot drive and reformatting, then installing OSX fresh and then setting up BootCamp again.
If you wish to switch your boot drive for something better, this is a good time to do this.
Install/upgrade RAM or storage drive in Mac's
If your machine is capable of Internet Recovery, then use that, then upgrade.
If your machine came with 10.6 or earlier, then use the 10.6 install disks and work up from there.
Erase, formatting, OS X installs on Mac's

ITunes Error when trying to download movie

Hi,
I get the same error over and over again when trying to download a purchased movie in iTunes (10.1.2) I was able to download the "Extras" and other content downloads from the iTunes Store, but the movie does not.
I keep getting the message that an "internal server error occured" and the error code is Err = 500.
Two sessions with iTunes customer support does not alleviate the problem.
Please help.

Okay... Don't ignore. Same problem occurs when using Windows 7 machine and the same Novatel modem. Ovation MC998D.
Tried somewhere else and it worked. Must be the cellular modem. Any help would be appreciated.

Get error when trying to upgrade to IOS5 - An error occured while trying to Back up ipad -402653138

Help
I am trying to upgrade to IOS5 and i cant get past the backup step of the upgrade - I keep getting An error occured while trying to Back up ipad (-402653138). I have tried removing my current backup and letting the update do the backup but still get same message.
I also get a warning right when I start the upgrade process that says I have purchased apps that have not been transfered and wants to know if I want to continue??? Not sure why I get this warning - I have ran the transfer purchases option several times and it seems to work. However, if I go under store and look at the purchases for my ipad it dosnt show any??? I would assume it should?
I have tried syncing and backing up, rebooting, all latest versions of itunes, etc.
Any ideas or help would be much appreciated.
Thanks
Erik

I took a leap of faith and finally got the update with no issues. Here's what I did:
First did yet another backup. Next, disabled all anti-virus and anything related (running Norton 360). Next, turned off Home Sharing.
Instead of "Update" I selected "Restore". Followed prompts as though I wanted to restore and update. Selected my latest backup and off it went. First did the wipe, then ios5 update, then restarted and began to sync. Sync took about 2 hours as I have lots of apps, photos and some TV shows I forgot were on there.
In the end, I had the exact same configuration. All apps on their pages as before the update, all folders intact and even all game scores and data from apps. Hurray!
Now just going through the App update process of the many (85) that showed up in App Store icon.
Hope this helps!

TS3694 Keep getting a 1015 error when trying to restore Iphone 3g

Hi, I have a problem with my old Iphone 3G, I upgraded to a Iphone 4 ages ago and just kept my old phone in a drawer, now I want to give it to my niece, so decided to plug into Itunes to reset it ready for her, it said it needed to update and download, it did that, but failed and said to restore it, but I keep getting 1015 error when it goes through the restore.
Any ideas and options other than going to Genious Bar ?

http://support.apple.com/kb/TS3694
error usually means you have a jailbroken or a modified iphone.

ITunes crashes when trying to sync iPhone 4's

Hi again,
I recently asked for help resolving this issue.
I installed and reinstalled iTunes and Quicktime.
I read every tip or disscusion here that looked relevant but nothing seems to help :/
I have windows xp on my computer.
The main problem is that when I hook the iphone to my PC it starts to sync.. it recognize my device and during step 2 (out of 6) it crashes and I get a message from iTunes saying an error has accourd and it needs to close.. It only happens when I try to sync.
I can't get the music from my PC to my iPhone
I feel lost.. Dunno what else can be done.
PLEASE help !
Thank you in advance

SAME PROBLEM HERE....PLZ HELP...!! ITUNES FREEZES WHILE SYNC STEP 2 OF 6...

OUI-25023 Error when trying to upgrade 10.1.0.3 CRS to 10.2.0.1 Clusterware

Hi all,
I'm trying to upgrade my RAC installation.
To test and validate the procedure, i'm first trying it on a one node cluster (node named camrdo01) running on 10.1.0.3 (CRS & Database).
When i'm lauching OUI for the Clusterware 10.2.0.1 installation, on the node selection screen, the node is present and selected, but I can't go on, i'm getting an OUI-25023 Error.
Here is the log from this installation:
INFO: Node selection page will be shown because a cluster install is detected on the selected home.
INFO: Setting variable 'CLUSTER_NODES' to 'CAMRDO01,'. Received the value from a code block.
INFO: The cluster node list 'CAMRDO01' is derived from the Oracle home properties.
INFO: Local node 'camrdo01' is derived from the clusterware stack.
INFO: Setting variable 'LOCAL_NODE' to 'camrdo01'. Received the value from a code block.
INFO: isRollingUpgradeEnabled():true
INFO: Rolling upgrade is enabled for this product.
INFO: Setting variable 'REMOTE_NODES' to 'CAMRDO01,'. Received the value from a code block.
INFO: isRollingUpgradeEnabled():true
INFO: Setting the 'ClusterInstallDescription' property to 'Select nodes (in addition to the local node) in the hardware cluster where the installer should install products that you select in this installation.'.
INFO: Setting the 'SingleInstanceDescription' property to 'Select this option if you want to perform a single node non-cluster installation even though the local node is part of a hardware cluster.'.
INFO: Setting the 'InvalidNodes' property to 'null'.
INFO: Setting the 'AllowRemoteNodeSelection' property to 'true'.
INFO: Setting the 'ShowCRSSoftwareVersion' property to 'false'.
INFO: Setting the 'NewHome' property to 'false'.
INFO: Setting the 'ClusterNodes ( CLUSTER_NODES )' property to 'CAMRDO01,'. Received the value from the UI page.
INFO: Setting the 'LocalNode ( LOCAL_NODE )' property to 'camrdo01'. Received the value from the UI page.
INFO: Setting the 'RemoteNodes ( REMOTE_NODES )' property to 'CAMRDO01,'. Received the value from the UI page.
INFO: Performing tests to see whether nodes CAMRDO01 are available
SEVERE: OUI-25023: The local node is not selected for installing this product. Include the local node in the cluster list or perform the installation on the nodes on which the install is to be performed.
INFO: User Selected: Yes/OK
Does anyone have tryed and succeded in upgradnig 10.1.0.3 RAC to 10.2.0.1, and is there any workaround for this problem?
thx for help,
Siftin

Can you check the install log to see if any errors are recorded there ?
http://download.oracle.com/docs/cd/B14117_01/em.101/b12140/A_oui_troubleshooting.htm#sthref268
HTH
Srini

Error when Trying to Upgrade from 8.1.7.4 to 10.2.0.3

Hello -
I am getting this error, when attempting to run the ultu102i script in preparation for an upgrade to 10g:
SQL> @utlu102i
DECLARE
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 1560
I have upgraded many databases to 10g from 8i, and have never seen this error before. I have the database started as 8i, and my environment set up as 8i (ORACLE_HOME, etc), and then I try to run teh utlu102i script that is within the /rdbms/admin directory of the 10g software home location.
Any ideas are greatly appreciated.
Thanks!

edit the utlu102i and utl102x.sql scripts and comment out the following two statements.
SELECT value INTO db_undo FROM v$parameter
WHERE name = 'undo_management';
SELECT value INTO db_undo_tbs FROM v$parameter
WHERE name = 'undo_tablespace';
this ones in metalink, i came accross it when upgrading to 10.2.0.3 i think its a new bug in this pathcset.
metalink noteid is: 407031.1
Message was edited by:
chris_c

Error when trying to upgrade SQL Azure database using DAC Package in MGMT Studio - "Unexpected XML Content"

Hi there,
I am trying to upgrade a database running in SQL Azure from my local dev box which is running SQL Server 2008 R2 Sp1 (Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64))
I extract the dac with no problems from my local database. However, when I try to upgrade the Azure db I get the below error.
This error occurs just after I browse to select the dac package and click open in the browse window. I.e. It happens before I actually try and apply this dac to the Azure database. Something is going wrong, presumably, when the package is parsed by management
studio.
I am running Visual Studio 2010 Premium Sp1 if that matters, plus all the various updates required for Azure development..
Thanks for your help!

Hey there, and apologies for the lack of response. Are you still having this issue and still needing help?
Thanks Guy

Mac OS X v10.7 Lion Itunes errors when trying to upgrade iphone

Similar Messages

Maybe you are looking for