Mac OS X version 10.5.8 how do I upgrade the version?
I have a Mac OS X version 10.5.8 how do I upgrade the version?
Choose About this Mac from the Apple menu and check the processor.
If it's a Core Duo Mac, click here, install the DVD, and run Software Update.
If it's a Core 2 Duo or better Mac, follow the Core Duo instructions, and if desired, open the Mac App Store, and try downloading 10.9. If you get told it's incompatible, go to the online Apple Store and order a download code for Lion 10.7.
Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004.
(99524)
Similar Messages
-
I have an iMAC using OS X Version 10.5.8, how do I upgrade the operating system?
Your first step will be to upgrade to Snow Leopard (10.6). Check the link below for requirements and purchasing info.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard -
I have a MacBookPro with OS X version 10.6.8, how do I upgrade the OS?
I have a MacBookPro with OS X version 10.6.8, how do I upgrade the OS?
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite- System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
why every time when im going to install games that cannot be installed and asking for newest version of iphone software, how can i upgrade newest version of iphone software?
Plug your phone into your computer running iTunes. Click on the phone in the left pane of iTunes. Click the "Check for Updates" button on the right.
If you have a 3G, the highest you can go is 4.2.1. -
I have Mac OS X 10.5.8. How can I upgrade the operating system?
I have a Mac OS X 10.5.8. How can I upgrade the operating system so I can get i Life 11?
You will need Snow Leopard which is available as a retail disk for $29 from the Apple store or online resellers. Make sure your Mac meets the system requirements; 1 GB RAM is the absolute minimum - 2 GB would be better.
-
I downloaded iFlashdriveHD, but the appropriate skins don't display. App asserts I must have iTunes ver. 9.1 or later. How do I determine what I have on a two week old iPad?
Just trying to do USB transfers from my black MacBook.App asserts I must have iTunes ver. 9.1 or later.
Where are you seeing this?
The app is not telling you that you need 9.1 on your iPad.
It does not use iTunes on the iPad for anything.
I'm trying to figure the version on my iPad.
It is the version that comes with your specific iOS firmware version.
But again, it is irrelevant to the app.
If you just got the iPad, it (the iPad) requires iTunes 10.4 on your computer. -
How do I upgrade the version of iOS on my iPad?
I downloaded Numbers and Pages a couple of months ago and today got an update message but when I try to update these 2 Apps I get a pop up message that they are not compatible with this device (iPad 2 wi-fi +3G) says I need to have iOS 5. Can I upgrade to iOS 5 and can I do it on the iPad or do I have to go a PC and download it and then sync it etc etc etc.? What a pain this convoluted method of going elsewhere to download.
You'll need a computer. Just plug in and tell iTunes to update the OS on your iPad.
-
When i try to update the software for my 3rd Gen iPod Touch to version 5 i get the message 'This version of iTunes (9.2.1) is the current version'. My Mac OS is 10.4.11. How can I update the iPod software?
The later iOSs requires at least OSX 10.5.8 for the Mac. You need iTunes 10.5 but 10.4.11 only goes to 9.x.. 10.5.8 is a paid upgrade.
Are you sure that you have a 3G iPod? If it is 8 or 16 GB it is a 2G and those can only go to 4.2.1 (also requires 10.5.8 or later). A 32 GB can be either 2G or 3G. To identify yours:
Apple - Support - Check Your Service and Support Coverage
Identifying iPod models -
TA48312 my mac is osX version 10.5.8, how do i upgrade to osX lion
my mac is osX version 10.5.8, how do i upgrade to osX lion
If you have a compatible Mac, phone the Apple Store and order a Mac OS X 10.6 DVD, install it, run Software Update, and use the Mac App Store to get Mountain Lion.
(68624) -
How to upgrade the version above 10.4 in free
hello,
Now the version of my Mac OS X system is 10.3.9. How to upgrade the version above 10.4 in free.
Thanks very much!You can't.
An upgrade from 10.3.x to 10.4 is a paid upgrade.
You need to purchase a retail copy of 10.4. -
How do i upgrade to version 10.3?
Hi,
I have not upgraded for a long time - im still on OS X v10.04 on my MAC G4.
So how do i upgrade to version 10.3 now?
I have looked in many places and cant find how to do it.
Thanks!Hi boychild,
first of all: WELCOME TO THE DISCUSSIONS!
In addition to Kappy's advice, be aware that you will have to Erase&Install since 10.3 cannot directly upgrade 10.0.x. Before you do that make sure you have a complete backup of your hard disk! You should also reinstall OS 9 first and only after you can boot into OS 9 without problems install 10.3 Panther.
Here are some articles that might be interesting to you:
10.3 Panther Upgrade: Decision tree+checklist
Mac OS X: Chart of Available Firmware Updates
Mac OS 9: Available Updates
Repair permissions before and after an update!
MacOS X 10.3/10.4: System maintenance -
How I can upgrade from Version 10.7.4 into the last version ?
How I can upgrade from Version 10.7.4 into the last version ?
If your computer meets the requirements then open App Store, sign in with your Apple ID. Locate Mountain Lion, purchase and download.
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009) -
Hi. My 2013 MacBook Air has suddenly reverted to a previous Excel spreadsheet (from May). I use the same spreadsheet several times a day and hit cmd 's' every 5-10 minutes. How can I find the version I was using yesterday?? Please help. Thanks
Might be something for you here > Automatically save and recover files - mac excel
-
I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?
The password used to log in to a user account remotely is the same as you would use to log into it locally. You can also use your Apple ID, so try that.
To change your login password read OS X Mavericks: Reset a login password
also OS X Mavericks: If you forget your login password -
How can I use the versionning tool to make a coherent solution to export
how can I use the versionning tool to make a coherent solution to export all objects used in my project to other db schema for testing as well as for implementation .
I want to know proper steps to Import/export objects.
while I am exporting my Master repository and work repository then again importing the all , no problem comes all the physical logical schema mapping and mapping between interfaces retains but
while I am trying to export and import one or two packages on the ease of testing then I am getting so many mismatches manually I am setting all why so?
required ur suggestion
Palash Chatterjeekelly-bot wrote:
Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
Our posts overlapped there. Are you saying you could reliably drag one pixel with CS3?
What other issues are you having? Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.
Maybe you are looking for
-
Hello, I am searching and searching for transition packs for Premiere Pro CS5, there are lots for 5.5 or 6 but none for 5. At least I could't find them. Any ideas anyone? Thanks in advance Alex
-
Can you modify the price of a contract in the ME32K directly from the item
Hello, I am in ECC6.0 I need to modify the price of an item in the contract (ME32K WK or MK) but it is grey (only in display). So I must do Item-Condition and then I can modify the price of the item. Can you modify the price of a contract in the ME32
-
F110 Automatic sent remittance advice to vendor per mail
Hi, I have an question. Does somebody knows how to sent automatic remittance advices to vendors per mail after you have runned the payment in transaction F110? Thanks for you help! Regards, Edwin
-
Inexplicable Object Required error in status bar? Crazy.
Hope someone can help. Firstly, I'm developing in Classic ASP, DW8.0.2. I am receiving an inexplicable "Object Required" error in my status bar on the following page of a website I am developing: http://www.moviegossip.co.uk/movie-reviews.asp?m=1 Wh
-
OSB 11g - Apache Webserver - WSDL location redirecting to OSB server
Hi, In our case we have a OSB server running on a dev machine and a Apache server is installed which receives the requests from the vendor and forwards the requests to the OSB. I have a Proxy Service on the OSB which is WSDL based and this is accesse