Mac OS X version 10.6.8.....slowly dying?

did all the suggestions to get rid of spinning wheel......no luck........now, occasionally while a page is loading, i get the following message:
Warning: Unresponsive script.....a script on this page may be busy or it may have stopped responding.  You can stop script now, open the script in the debugger, or let script continue......
gives choices: debug script.........stop script......continue
why is this popping up all of a sudden & which should i select?  i've been selecting stop script & the page is loaded???
got my computer is 2006.....is it dying???
PLEASE HELP!
thank you.........

You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser, but check this also:
http://support.apple.com/kb/HT5655?viewlocale=en_US&locale=en_US  which also covers ‘blocked plug-in’.

Similar Messages

  • Adobe bridge cc is not working on my mac snow leopard version 10.6.8. In other words the program will not open all other programs work fine

    Adobe bridge cc is not working on my mac snow leopard version 10.6.8. In other words the program will not open, but all other programs i have been able to open just fine

    Moving this discussion to the Bridge General Discussion forum.

  • I am trying to sync ewallet with my mac but my version is 10.5.8

    I am trying to sync ewallet with my mac but my version is 10.5.8
    If I buy Lion how hard is it to install and update? do I loose any data?

    Read
    Harden your Mac against malware attacks

  • HT1199 My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

    My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

    You already have the software installed that you need if you have 10.8.2.
    If AirPort Utility cannot find the Express, that is another matter. More software is not needed. More troublehooting is needed.
    Power up the Express for a full minute
    Hold in the reset button on the Express for 7-8 seconds and release
    Allow a full minute for the Express to restart
    Click the AirPort icon at the top of the Mac's screen
    Look for a heading of New AirPort Base Station
    Just below that, click on AirPort Express
    What happens?

  • How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

    How to prevent iTunes for Windows from "Updating iTunes Library"?
    My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
    Thanks for any help/suggestions.

    Connect the PC to the library on the NAS. Wait while "updated".
    Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
    Close iTunes on the PC. Do not open iTunes on the Mac.
    Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
    Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
    The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
    Open iTunes on the Mac. It will update again, but that should be last time.
    tt2

  • When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?

    When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?
    == This happened ==
    Every time Firefox opened

    try
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • When I bought my Mac Air OSX Version 10.9.2 my daughter helped me migrate the contents of my previous macbook.  But in the process seems to have duplicated the iTunes library .  The start up disk is almost full and plus it doesn't my iPhone.  Please help!

    When I bought my Mac Air OSX Version 10.9.2 my daughter helped me migrate the contents of my previous macbook.  But in the process seems to have duplicated the iTunes library - How do I get rid of one.  The start up disk is almost full and plus it doesn't synch properly with my iPhone 4S.  Please help!

    Hello nicky:
    You should run repair disk from your software install DVD before you try anything else. The crash may have damaged some of your directories - and a possible cause of the "missing/not missing" tunes.
    Barry

  • I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them  ... can anyone help?

    I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them  ... can anyone help?

    Hi Mary,
    I don't remember those arrows in 10.6, only 10.7 & up!?
    I have 10.6.8, as you do. To make your Safari full screen, make sure you have the left hand side of your safari page moved  all the way to the left.  Then move your cursor to the BOTTOM RIGHT CORNER of the safari page, and simply drag your page towards the lower right hand corner of the screen. NOTE: you will see a series of lines on the bottom right corner of the page, indicating where to place you cursor arrow.
    By wuzradioman here...
    https://discussions.apple.com/thread/4218928?start=0&tstart=0

  • My mac is a version 10.5.8. I just downloaded ios7, and it is telling me I need to download iTunes 11 to connect to my phone, but I don't have a new enough version. What do I do?!

    My mac is a version 10.5.8. I just downloaded ios7, and it is telling me I need to download iTunes 11 to connect to my phone, but I don't have a new enough version. What do I do?! I think snow leopard was the last update I purchased.  Is there a way to convert my phone back? I need to be able to update it, but don't have the money for a new computer.. Help!

    10.5.8 is Leopard, not Snow Leopard. Leopard ran on both PPC and Intel Macs, but Snow Leopard runs only on Intel Macs. iTunes 11 will run on Snow Leopard, though I'm not sure whether iOS7 requires a higher system (Apple seem to specify only itunes 11 and not an OSX system so you may be OK). However if your Mac is a PPC you cannot proceed; if it's an Intel one you can purchase Snow Leopard in the Online Store (search for Snow Leopard to find it quickly) - it's not expensive. It's not possible to roll your phone back to iOS6.

  • On a Mac OS X version 10.4.11 and itunes 9.1.1.  Can't update to itunes 10.6Trying to get a previously purchased song.  Can't use the purchased option under quick link - nothing shows up and won't let me purchase an already purchased song.  What can I do?

    On a Mac OS X version 10.4.11 and itunes 9.1.1.  Can't update to itunes 10.6, Mac too old. Trying to get a previously purchased song.  Can't use the purchased option under quick link - nothing shows up and won't let me purchase an already purchased song.  What can I do?

    If possible you need to upgrade OS X. However, what you can upgrade to is dependent on what your Mac hardware and configuration is which you have not provided in your profile.

  • How to quit frozen "Help" in PSE 9 on MAC OS X Version 10.5.2?

    I run PSE 9 (no updates) on my MAC OS X Version 10.5.2.
    I was working with a photo and needed additional information for the photo I was editing, and consulted "Help" (upper right tool bar).
    The Help screen opened but the search did not reveal the information Iwas looking for, and I tried to close out of Help.  I can not quit Help!  There is a bright blue square in my dock with a lower case i in white where it does not belong.
    I am unable to shut down my computet because Help is active - and it seemingly wants to stay that way!
    Can anyone direct me to a safe way to quit Help - or force quit Help? 
    I am much less concerned about Elements than I am my MAC!
    Thank you for your assistance.

    Glad it worked. You'd probably be better off downloading help files as pdfs. Here's a link:
    http://forums.adobe.com/thread/992825?tstart=0

  • How do I install Safari 6 on my Mac OS X version 10.6.8 with Safari version 5.1.2?

    How do I install Safari 6 on my Mac OS X version 10.6.8 with Safari version 5.1.2?
    Thank you.

    Safari 6 requires Lion or newer.
    (115521)

  • How do i install Mac OS X version 10.6.8 on my computer from Mac OS X 10.5 Leopard

    how do i install Mac OS X version 10.6.8 on my computer from Mac OS X 10.5 Leopard

    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • How do I install camera raw updates to the mac app store version of elements 10

    In the mac app store version of Elements 10 there is 'get updates' link on the help menu. And when I try to do it manually from a download I get a message telling me that 'this update no applicable'.

    Once again,  Apple only provides support for purchasing issues,not with using software purchased via the app store, any more than staples will give you tech support for a boxed version you buy from them:
    The Mac App Store handles the download, installation, licensing, and updating of all products purchased through it. If you encounter an issue with an Adobe product during one of these four processes, visit http://www.apple.com/support.
    For all other issues, including program errors and how to questions, visithttp://www.adobe.com/support.
    Apple only provides support for problems with updates released via the app store and adobe has NEVER bothered to issue updates anything offered through the app store, so you can't get any help from apple for this.
    It's more complicated to install ACR in the app store version. You have to do it manually. See this thread:
    http://forums.adobe.com/message/4106477

  • I just installed Photoshop Elements that is supposed to be for Mac. The message appeared that said, ""You can't open the application Photoshop Elements 2.0 because PowerPC applications are no longer supported." I have a Mac OS X, Version 10.8.5,

    I just installed Photoshop Elements that is supposed to be for Mac. The message appeared that said, ""You can't open the application Photoshop Elements 2.0 because PowerPC applications are no longer supported." I have a Mac OS X, Version 10.8.5,

    Have a look here:
    https://www.google.com/search?q=%22You+can%27t+open+the+application+Photoshop+Elements+2.0 +because+PowerPC+applications+…

  • HT1338 I have a Mac OS X Version 10.5.8. Just updated my iphone 5 & can not back anything up from itunes because my software on my mac is not up to date. What software should I now have to be up to date? Im so confused by all that is offered! PLEASE HELP

    I have a Mac OS X Version 10.5.8. Just updated my iphone 5 & can not back anything up from itunes because my software on my mac is not up to date. What software should I now have to be up to date? Im so confused by all that is offered! PLEASE HELP ME.

    Hi
    You need to upgrade to the next OS 10.6 Snow Leopard by purchasing the DVD online.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    and once installed, use Software Update
    - to update to 10.6.8
    - and update your iTunes.

Maybe you are looking for

  • Evaluating the value of a variable in OpenScript

    I am attempting to navigate through screens and views based on a spreadsheet containing the applicable screens/views. I am using variables based on a dataset which I have been successful in substituting into the various method calls to change views,

  • Scheduling Agreement Problem

    When a schedule agreement is created in SAP 1000 company code  with one price; in many cases the price will subsequently change. The new price for the material is maintained by purchasing. At the time of an invoice matching against the PO however - S

  • How to fit content to 100% width?

    Hi There, I couldn't figure out how to get my content to display at 100% width when I designed the background of my website in Muse so I tried designing it in illustrator then exporting it as an image to upload into Muse. I designed it to the default

  • Elements 11 won't play audio mp3 from within slide show

    I've created a slide show and have attempted to insert  an audio mp3 file. Audio file shows that it has been added to slide show but it wil not play. I've added the mp3 multiple ways, by using the add media -- audio from element organizer as well as

  • Transferring spotlight comments to iPhoto

    I've got several hundered scanned photos on a hard drive with spotlight comments attached. Is there any way to transfer those spotlight comments into iPhoto's comment field when I import the files into iPhoto, or will I have to type them all in manua