Mac OS X Will Not Start Up!

Hi
I have a major problem right now with my Mac Mini, thats why I'm on my Ibook G4 at the moment.
After having reinstalling on of my pieces of software (Dreamweaver 8) my computer asked me to restart. So I did do so and now at startup loads of writing comes up in these black bars.
In the writing it mentions 'kernal and Darwin several times and at the end of the writing it says 'Panic: We are haning here.....'.
I also tried putting in my 'Mac OS X Install Disc 1' to see if I could reinstall Mac OS, but now the disc is just stuck in the drive.
Any help would be very greatly appreciated!
Mac Mini   Mac OS X (10.4.7)   G4

You are experiencing a Kernel Panic.
First, to remove the disk. Hold the mouse button down while powering up the mini. This should eject the disk.
Next, follow these instructions to help solve your Kernel Panic: http://www.thexlab.com/faqs/kernelpanics.html

Similar Messages

  • TS2570 My Mac Book Pro will not start up.  I ran the AHT and received the following error:

    My Mac Book Pro will not start up.  I ran the AHT and received the following error:  4SNS/1/40000000:Th0H-90.750.  Anyone know what this means?

    I have no idea how much it will cost to repair. I don't even know what the exact problem will prove to be. It may be quick if it isn't a motherboard problem. I just don't know. Take it in for a service diagnostic, then they can tell you what is involved.

  • My mac book pro will not start, i hear the fan sometimes but nothing else

    my mac book pro will not start, i hear the fan sometimes but nothing else

    What is the exact model of your Macbook Pro?

  • Mac Book Pro will not start on Battery Power

    Mac Book Pro will not start on Battery Power although battery at 98% need to connect charger. When started date and time incorrect, comes up as 1st Jan 2012.

    What is the exact model of your MBP?  The date change often is an indication of power loss to the MBP, such as disconnecting the battery.
    If the SMC reset does not solve the situation, post this from your MBP:
    Make certain that the power adapter is connected.
    Ciao.

  • Just loaded Yosemite on my Mac and Illustrator will not start-up?

    Just loaded Yosemite on my Mac and Illustrator will not start-up?

    Reinstall the software and also read this:
    http://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html
    Mylenium

  • Mac crash; recovery will not start

    Yesterday my Mac suddenly crashed into a screen with blue (and white) lines. It wouldn't respond to anything, so I powered it down and tried to boot again. However, it will not boot. It will show the Apple logo, request my password and after a while (with the Apple logo and the spinning wheel) it just shows a blank screen (grey), while the CPU fans are spinning like crazy.Sometimes will it not even get this far and stop doing anything before requesting the password. The guest mode has the same problem.
    I basically tried everything to fix it; the recovery option will also show the blank grey screen but nothing else (even after 30 minutes); the internet recovery downloads fine and then pulls the same stunt, so even the recovery will not work. I've tried save mode, which cannot start up (Filevault is activated) and seems to end mid-way through. Sometimes the safe mode crashes immediately after the boot starts with a kernel panic (/sbin/launchd failed, errno 2); after resetting the NVRAM it won't panic.
    I've checked the hardware (T startup option, full check), which al seems to be OK. SMART status from the harddrive looks OK (checked with DiskWarrior). Starting in single user mode sometimes gets me through the password request screen and allows me to check the hard drive (fsck -fy). This seems to change permissions, however, after a reboot or exit command, the problem persists and starting up in single user mode and performing the fsck -fy command again seems to fix some issues. When I enter the exit command in safe mode, it'll start up fine, but when the graphic user interface starts, it'll give me the grey screen again (so a blank screen, while the CPU fans are at full power).
    Does anyone have any idea what I can do to fix this? Since even the recovery will not start (and neither will the internet recovery), I've got no clue what to do to fix this issue...

    Your comment about the "blue and white lines" has me wondering.  You say you have a fairly recent MacBook Pro, correct?  If that is the case, you probably have a model which has both discrete and integrated GPUs.  It is possible that your discrete GPU has failed, and whenever the OS is trying to switch to it is when your system just "hangs" (because the GPU has failed).  It all works properly as long as it is on the integrated GPU, but when something causes it to switch it hits the bad GPU and locks.
    I would suggest that you make an appointment at your nearest Apple Store to have the specialists at the Genius Bar take a look at it for you.  If you are still under the 1 year warranty (or extended Apple Care if you purchased it) then any needed hardware repairs would be free, unless it is due to accidental damage such as a spill in the keyboard, etc.
    If you don't have access to an Authorized Apple Service Center, and you do have access to another Mac, you could try making an external boot drive on the other Mac, then install the app "gfxCardStatus" on that MacOS instance (when booted from the external drive).  While still booted from the external drive, use the gfxCardStatus app to force the Mac to only use the integrated GPU then shutdown and boot your "dead" Mac from that drive.   If it boots and runs, now, try to change the external drive to force to use only the discrete GPU then see how your system boots.  If your system, will fully boot using one or the other, then it seems that your problem is probably related to one of your GPUs.  It could be a hardware failure, or it could be a corrupted driver.  If your system won't boot from either GPU, then my guess about it being a GPU issue is probably wrong. 

  • Mac Book Pro will not start up

    My 2008 MBP will not start up.  When i turn it on, it goes to a gray screen with the Apple Symbol and the wheel below it keeps spinning.  ANy suggestions?

    It may be just a graphic card or a display problem, but as the MacBook Pro has got the graphic card soldered onto the logic board, you will need a new logic board.
    The logic board is the most expensive part of the computer, and more on a MacBook Pro that has got near everything soldered to the logic board. Take the Mac to an Apple Store to get your Mac repaired.
    If it's the display, it will be expensive too, but less than a new logic board

  • I have just replaced my mac mini because previous motherboard was damaged. I want to pair with my existing wireless keyboard and mouse but can only pair with thebold mac mini which will not start. Any ideas?

    See title. How do I unpair a wireless keyboard and mouse when the previous paired mac mini is damaged and will not start?

    You should be able to go to System Preferences -> Keyboard and System Preferences -> Mouse and discover the bluetooth devices.
    Also, do you have a bluetooth icon on the top bar of your mac?  Should look sort of like this:
    If you can figure out which device is which (by trial and error, if nothing else), you can connect to them on this menu.

  • MAC BOOK PRO WILL NOT START- COMPLETELY DEAD!

    I forgot to power down my mac book pro last night. I closed the lid & forgot to go back & turn it off completely. This morning it will not power up. The machine is completely dead.
    The power supply wasn't connected overnight so I assume the battery has completely drained. It's been charging for the last 2 hours (which would normally have fully charged it) but the light on the power cord is still showing green so I assume it's still charging, however there should be plenty of juice in the battery to start the computer but it still won't start.
    Any ideas how to get it started?

    A dead battery will take longer to start charging, but leave it on and eventually it will start to charge again.
    Once you get it charged, perform a SMC and PRAM reset
    https://discussions.apple.com/docs/DOC-3046

  • Mac Pro 13" Will NOT start in Safe Mode - Tried everything!

    hello I'm trying to get my Mac started overnight it's decided that it doesn't want to work.
    ive tried various startup commands to see if I can fix the issue but safe mode will not work what so ever
    When I login this appears and at 40/50% it just turns off.
    anyone know?
    g

    Try resetting NVRAM if you haven't already. How to Reset NVRAM on your Mac - Apple Support
    Install any new hardware recently?

  • Hi All, Mac Pro 2008 will not start after shutdown straight from sleep! Help!

    WILL A NEW LOGIC BOARD SOLVE MY PROBLEM?
    My early 2008 Mac Pro (2.8, 8-core 22 gigs ram) was shutting down from sleep both when I activated it, and then later by itself. Recently it refused to turn on, shuts down after about 3 seconds, light goes off, fans stop.
    Took it in and they replaced the GPU card and PSU. Things were great ... for two weeks. Then suddenly the same symptoms, but at an accelerated rate of occurance. After a day, it did not power on at all save the three seconds of startup fans.
    Took it in again. They AGAIN replace the known-faulty ATI Radeon HD2600 XT cards (two), the ones Apple have agreed to replace up to July 2011.
    Well got the machine back and she worked like a charm... for two weeks. Same thing now. By the way all checks of hardware, ram, disk drives - extensively have come up OK.
    Does anyone have any advice, or have the same problem?
    If it is the logic board, is it worth it to replace or when things go south like this is it better to cut your losses as more and more will likely go wrong?
    Would appreciate any feedback.
    Many thanks

    We can't help with your question. How would we know what has gone wrong with your hardware? We don't have access to your machine.
    I would take it back, or send it in, to Apple Repair.
    I hope you have AppleCare!

  • Growl 1.4 from the Mac App Store will not start up at login

    I have the new MacBook Pro with Retina Display. I have Growl 1.4 from the Mac App Store. Sometimes it starts at login, other times it does not. Can someone give me some advice?

    Make a back up of your Library. Now you can update without fear.
    Regards
    TD

  • 'mac book pro-will not start although logo appears'

    Help! Stuck in start up. I shut down using power button as it was hung up and would not respond using force quit. i turned the computer on and it shuts itself down after several minutes. The apply logo is displayed and the band is only partially black.
    HOpe me someone can assist. thank you, community.

    Startup Issues - Resolve
    Startup Issues - Resolve (2)
    Startup Issues - Resolve (3)

  • Mac book pro will not start apple logo spining wheel then gray screen then a circle  with a line through it

    need help with MacBook Pro 17inch willnot start apple logo, spining wheel, then gray screen, a circle with digional line through the circle

    Mac OS X- "Broken folder" icon, prohibitory sign, or kernel panic when computer starts
    Mac OS X- Gray screen or prohibitory sign appears during startup

  • Mac app store will not start in maverick os x. Anyone has any suggestions?

    pleace help me...

    Use OS X Recovery to reinstall Maverisks and hopefully it will repair the ise with the Mac App Store. This is safe to do over your current installation, but you should always be sure that you have a current backup of everything.
    OS X Recovery -
    http://support.apple.com/kb/HT4718

  • Mac book pro will not start

    mac book pro 13 wont atart up all i get is a folder icon with a question mark in it any help ?

    Saying that it can't find the last boot volume and that you need to
    use control panel to set startup disk
    or repair/restore and that your boot drive volume has a bad directory
    try booting from OS X DVD (use c on startup or option key) and go to Utility menu and then Disk Utility.

Maybe you are looking for

  • Radial Filter not changing to outside in Photoshop CC Camera Raw

    Hello folks, I realise that I may be missing the very obvious, so apologies in advance - this has been driving me nuts for a few weeks now and I can't find anything in forums to help me out... Basically, in Camera Raw filter within Photoshop CC, when

  • No thumbnails for XPM images

    I used to see thumbnails for my xpm images in Finder, however now I no longer see any thumbnails or preview images. How does one fix this?

  • Statement in clause where

    Hi, I'm a little confused I have this sentence, msi.inventory_item_status_code | |''! = 'OPM' in a query, I want to know if it affects the performance of the database (Oracle Database 10g Enterprise Edition Release 10.2.0.2. 0 - 64bit Production). SE

  • ISE's Internal Root CA. How to generate new one in distributed deployment?

    Hello, I have two ISE nodes in distributed deployment. I would like to generate new Internal Root CA certificate. I was able to do that from primary node, but only FOR primary node. How can I achieve this for the other node? Best Regards, Marek

  • How do you permanently delete a contact?

    How do you permanently delete a contact so it doesnt show up when you compose a new text message? (it comes up as 'other' instead of 'mobile') I need to stop drunk texting this number and cant delete it lol