Mac os x yosemite 10.10.1 still lags and bugs while using macbook pro retina 13inch i5 mid 2014

i just got macbook pro retina and i upgraded to yosemite 10.10.1 its still have bugs and lags a lot , does anybody feel the same ,
its not smooth at all ..

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Similar Messages

  • I,m using macbook pro retina, I have changed the language to Arabic but still I find that password and downloading are coming in arabia

    I,m using macbook pro retina, I have changed the language from arabic to Endlish through system preference, but still I find that password and downloading are coming in arabia, when I start my computer it show password request in Arabic.

    http://support.apple.com/kb/ht4102

  • IPhone 6 Plus 64GB (iOS 8.1 or 8.1.1) springboard crashes repeatedly when making phone calls via Continuity on Macbook Pro Retina Mid 2014 using Yosemite 10.10.1

    I USED TO be able to make phone calls using continuity on my MacBook Pro (Retina, 15-inch, Mid 2014) with Yosemite (10.10) via my iPhone 6 Plus on iOS 8.1 without any problems.  Once I updated Yosemite to 10.10.1, my iPhone's springboard would continually crash where it brings up the Apple logo and quickly restarts repeatedly until I end the call.  Just so that you know, I am able to stay on the call while this is occurring the whole time. 
    I need to reiterate, this all started happening as soon as I updated Yosemite to 10.10.1 while still on iOS 8.1.  I know this because I made a few phone calls (loving the feature), updated Yosemite to 10.10.1, then made a few phone calls afterwards, and this started happening. 
    When iOS 8.1.1 came out, I eagerly updated hoping this issue would go away, and it did not.  I'm hoping Apple notices this post.  If anyone else has this problem, please contact Apple and chime in this post as well.  Thank you Apple for incorporating continuity calling. I love this feature, but need to use it without my phone's springboard constantly crashing.

    I have this issue as well. I am using an iPhone 6 plus, iPad Air 2, 5K iMac, and MacBook Pro. When I make a continuity calls from any device, the springboard crashes. This only happens with outgoing calls, incoming calls are functioning normal. I am currently working with multiple Apple Senior Advisors, and they are working directly with iOS a engineers. I have an active open case and will update this thread when a resolution is found.
    Just a tip for everyone with this issue, restoring your devices and setting them up as new WILL NOT correct this issue. Save yourself the hassle. I did this with my iPhone, iPad, and MacBook and the issue still persists.

  • Macbook pro retina 15 inch running Yosemite extremely slow previews/rendering

    Hello,
    So I got the newest version of Macbook pro retina 15 inch (mid-2014) basic model with 16GB of RAM, updated the OS to Yosemite, got Adobe CC on board, was happy for a second until I tried to edit stuff in After Effects. Preview plays at 13 fps at best when rendering something basic as a shape going from one point to the other. If you add footage it is 7fps or something. Already tried some options that were suggested on other threads like disabling App Nap but so far nothing helped. Please help me out, I'm really getting frustrated because of this.
    Also, it takes ages to render final comp form Premiere Pro as well.

    See this page for resources about making After Effects work faster: http://adobe.ly/eV2zE7
    Start here to learn After Effects:
    http://adobe.ly/AE_basics

  • Facetime and iMessage on Macbook Pro Retina display slow after Yosemite 10.10.3 Update

    Hi
    I recently updated my Macbook Pro Retina display to Yosemite 10.10.3 update. I see that the Facetime and iMessage has become relatively very slow. Like for example when someone calls on my phone it takes like more than 15 seconds + to show up on my macbook. Earlier it used to be like instant!
    I started seeing this problem on Yosemite 10.10.3 update only. Also the same is the story with iMessage. When I get an SMS or an iMessage from my friends it takes like a good 30 seconds + to show up on my macbook pro.
    Just for your information, this is the version of macbook i am using
    MacBook Pro (Retina, 13-inch, Late 2013)
    2.4 GHz Intel Core i5
    8 GB 1600 MHz DDR3
    251GB Flash storage
    As Suggested by someone I also tried RESETTING my computer's PRAM. That didn't seem to help either. Can anyone help. If it is a genuine bug in Apple Yosemite, I'd like to file a bug in the community.
    Regards
    Shreyas

    Hi Barney,
    Here is the output you seek -->
    Problem description:
    FaceTime takes 30 seconds to open up
    EtreCheck version: 2.1.8 (121)
    Report generated 19 April 2015 8:13:14 am IST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (Retina, 13-inch, Late 2013) (Technical Specifications)
        MacBook Pro - model: MacBookPro11,1
        1 2.4 GHz Intel Core i5 CPU: 2-core
        8 GB RAM Not upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en0: 802.11 a/b/g/n/ac
        Battery Health: Normal - Cycle count 430
    Video Information: ℹ️
        Intel Iris
            Color LCD spdisplays_2560x1600Retina
    System Software: ℹ️
        OS X 10.10.3 (14D136) - Time since boot: 23:47:26
    Disk Information: ℹ️
        APPLE SSD SM0256F disk0 : (251 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 250.14 GB (111.66 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple Internal Memory Card Reader
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Application Support/Viscosity
        [not loaded]    com.viscosityvpn.Viscosity.tap (1.0) [Click for support]
        [not loaded]    com.viscosityvpn.Viscosity.tun (1.0) [Click for support]
    Launch Agents: ℹ️
        [loaded]    com.citrix.AuthManager_Mac.plist [Click for support]
        [running]    com.citrix.ReceiverHelper.plist [Click for support]
        [running]    com.citrix.ServiceRecords.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [loaded]    com.realvnc.vncserver.peruser.plist [Click for support]
        [not loaded]    com.realvnc.vncserver.prelogin.plist [Click for support]
        [running]    net.juniper.pulsetray.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.macromates.auth_server.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [loaded]    com.realvnc.vncserver.plist [Click for support]
        [loaded]    com.sparklabs.ViscosityHelper.plist [Click for support]
        [running]    net.juniper.AccessService.plist [Click for support]
        [not loaded]    net.juniper.UninstallPulse.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        net.juniper.DSSafariExtensions: Version: Unknown [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        Silverlight: Version: 4.1.10329.0 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        PepperFlashPlayer: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 [Click for support]
        googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
        MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        ClickToFlash
        Reload Button
        YoutubeWide
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        MacFUSE  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            18%    mds
            15%    Safari
             6%    WindowServer
             5%    com.apple.WebKit.Networking
             1%    ocspd
    Top Processes by Memory: ℹ️
        455 MB    softwareupdated
        206 MB    Microsoft Outlook
        153 MB    com.apple.WebKit.WebContent
        146 MB    WindowServer
        137 MB    Safari
    Virtual Memory Information: ℹ️
        298 MB    Free RAM
        3.76 GB    Active RAM
        3.36 GB    Inactive RAM
        1.17 GB    Wired RAM
        4.45 GB    Page-ins
        901 KB    Page-outs
    Diagnostics Information: ℹ️
        Apr 18, 2015, 08:25:23 AM    Self test - passed
        Apr 17, 2015, 06:29:29 PM    /Library/Logs/DiagnosticReports/ncproxyd_2015-04-17-182929_[redacted].crash
        Apr 17, 2015, 03:11:05 PM    /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-04-17-151105_[ redacted].cpu_resource.diag [Click for details]

  • Ghosting (burn-in) on MacBook Pro (Retina, Mid 2012) after installing OS X Yosemite

    Has anyone started noticing ghosting (burn-in) on your laptop screen after installing OS X Yosemite ?
    I'm using MacBook Pro (Retina, Mid 2012).

    Hi,
    I may have noticed the same thing, (Should I be concerned about colors behind grey login screen at startup?). I called apple support and it appears that the screen background is "slightly visible" after the update. You can change your background and see if your ghosting image moves accordingly. The white bleed through in my images, happens to be from Earthdesk which displays a map as a background. You might be seeing a similar effect.

  • I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?

    I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?

    Go to: Apple > Force Quit
    and select Mail > Force Ouit.

  • After updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid

    after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm

    Hi Buterem,
    I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
    How to use Activity Monitor - Apple Support
    If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
    Regards,
    - Brenden

  • I'm receiving SBBOD randomly on my Macbook Pro Retina running Yosemite

    For the last several weeks I've occasionally received a SBBBOD when performing various tasks on my system. Not sure what in particular might be causing it but I feel like more often than not it is when I'm using Safari. It always results in a spinning ball and the only thing I can do is move windows around but can not click anything. It requires me to force power off the system.
    Most importantly, sometimes when rebooting I'll experience a flashing folder icon as if the system can not find the bootable drive. If I power off the system again, it will usually load the OS. This pointed to potential HDD corruption and so I ran the necessary checks there and never got any HDD error reported. Also have run memtests and overall Apple Hardware Tests...all with no errors reported.
    I recently updated Java Plugin and also ran an EtreCheck as recommended in other similarly reported problems. Here is the results of that report...
    EtreCheck version: 2.1.8 (121)
    Report generated March 30, 2015 at 9:40:54 AM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (Retina, Mid 2012) (Verified)
        MacBook Pro - model: MacBookPro10,1
        1 2.3 GHz Intel Core i7 CPU: 4-core
        8 GB RAM Not upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en0: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 237
    Video Information: ℹ️
        Intel HD Graphics 4000
        NVIDIA GeForce GT 650M - VRAM: 1024 MB
            Color LCD spdisplays_2880x1800Retina
            SMS23A550H spdisplays_1080p
            SMS23A550H spdisplays_1080p
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 12:12:5
    Disk Information: ℹ️
        OWC Aura rMBP disk0 : (480.1 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 478.75 GB (101.83 GB free)
                Core Storage: disk0s2 479.11 GB Online
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/hosts - Count: 42
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Extensions
        [loaded]    com.avatron.AVExFramebuffer (3.0.1 - SDK 10.10) [Click for support]
        [loaded]    com.avatron.AVExVideo (3.0.1 - SDK 10.10) [Click for support]
        [not loaded]    com.displaylink.dlusbncm (1.11.0 - SDK 10.9) [Click for support]
        [loaded]    com.displaylink.driver.DisplayLinkDriver (2.3 - SDK 10.9) [Click for support]
        [loaded]    xxx.qnation.PeerGuardian (1.1.10) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.Logitech.Control Center.HID Driver (3.5.0 - SDK 10.0) [Click for support]
        [not loaded]    com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.0) [Click for support]
        [not loaded]    com.antecea.driver.AnteceaAudioDrv (1.0.0) [Click for support]
        [loaded]    com.logmein.driver.LogMeInSoundDriver (4.1.48f99) [Click for support]
    Startup Items: ℹ️
        DynDNSUpdater: Path: /Library/StartupItems/DynDNSUpdater
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
        [loaded]    com.paragon.NTFS.trial.plist [Click for support]
        [loaded]    com.paragon.NTFS.upd.plist [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [running]    com.amazon.sendtokindle.launcher.plist [Click for support]
        [not loaded]    com.displaylink.useragent-prelogin.plist [Click for support]
        [running]    com.displaylink.useragent.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.lexmark.bmspecificlaunchd.plist [Click for support]
        [loaded]    com.lexmark.lxknetlaunchd.plist [Click for support]
        [running]    com.Logitech.Control Center.Daemon.plist [Click for support]
        [failed]    com.logmein.LMILaunchAgentFixer.plist [Click for support]
        [running]    com.logmein.logmeingui.plist [Click for support]
        [running]    com.logmein.logmeinguiagent.plist [Click for support]
        [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.bombich.ccc.plist [Click for support]
        [running]    com.displaylink.displaylinkmanager.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [running]    com.jungledisk.service.plist [Click for support]
        [running]    com.jungledisk.workgroupservice.plist [Click for support]
        [running]    com.logmein.logmeinserver.plist [Click for support]
        [loaded]    com.logmein.raupdate.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [failed]    com.vmware.launchd.vmware.plist [Click for support]
        [loaded]    xxx.qnation.PeerGuardian.kextload.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
        [failed]    com.facebook.videochat.[redacted].plist [Click for support] [Click for details]
        [failed]    com.google.GoogleContactSyncAgent.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
    User Login Items: ℹ️
        Bartender    UNKNOWN  (missing value)
        Google Notifier    Application Hidden (/Applications/Google Notifier.app)
        GrowlHelperApp    Application  (/Users/[redacted]1/Library/PreferencePanes/Growl.prefPane/Contents/Resources/G rowlHelperApp.app)
        Skype    Application  (/Applications/Skype.app)
        AirDisplayStatusItem    UNKNOWN  (missing value)
        ScreenCapture    UNKNOWN  (missing value)
        Cloud    UNKNOWN  (missing value)
        AppTrap    Application  (/Users/[redacted]1/Library/PreferencePanes/AppTrap 2.prefPane/Contents/Resources/AppTrap.app)
        Caffeine    Application  (/Applications/Caffeine.app)
        MacLWSLauncher    Application  (/Applications/Logitech/LWS/Logitech Webcam Software.app/Contents/MacOS/MacLWSLauncher.app)
        ScanSnap Manager    Application  (/Applications/ScanSnap/ScanSnap Manager.app)
        BetterTouchTool    Application  (/Applications/BetterTouchTool.app)
        Isolator    Application  (/Applications/Isolator.app)
        Pomodoro    Application  (/Applications/Pomodoro.app)
        Alfred    UNKNOWN  (missing value)
        Dropbox    Application  (/Applications/Dropbox.app)
        Knock    Application  (/Applications/Knock.app)
        Air Display Host    Application  (/Applications/Air Display Host.app)
        Cinch    Application  (/Applications/Cinch.app)
        Google Drive    Application  (/Applications/Google Drive.app)
        Spotify    Application Hidden (/Applications/Spotify.app)
        EvernoteHelper    Application  (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
        AdobeResourceSynchronizer    Application  (/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/Support/AdobeResourceSynchronizer.app)
        CNQL1212_ButtonManager    Application Hidden (/Library/CFMSupport/CNQL1212_ButtonManager.app)
    Internet Plug-ins: ℹ️
        nplastpass: Version: 2.5.5 [Click for support]
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        DivXBrowserPlugin: Version: 1.4 [Click for support]
        LogMeIn: Version: 1.0.970 - SDK 10.7 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        LogMeInSafari32: Version: 1.0.970 - SDK 10.7 [Click for support]
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.7
        AdobePDFViewer: Version: 9.5.5 [Click for support]
        PepperFlashPlayer: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 40 Check version
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
        Picasa: Version: 1.0 [Click for support]
        WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
    Safari Extensions: ℹ️
        Google Analytics Opt-out Browser Add-on
        mailto:
        Save to Pocket
        LastPass
        Evernote Web Clipper
    3rd Party Preference Panes: ℹ️
        AppTrap  [Click for support]
        BTTPrefs  [Click for support]
        DivX  [Click for support]
        Flash Player  [Click for support]
        Growl  [Click for support]
        Java  [Click for support]
        Logitech Control Center  [Click for support]
        Tuxera NTFS  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 478.75 GB Disk used: 376.92 GB
        Destinations:
            WD 2TB TimeMachine [Local]
            Total size: 2.00 TB
            Total number of backups: 129
            Oldest backup: 2011-09-14 04:46:20 +0000
            Last backup: 2015-03-27 22:53:14 +0000
            Size of backup disk: Excellent
                Backup size 2.00 TB > (Disk size 478.75 GB X 3)
    Top Processes by CPU: ℹ️
             7%    WindowServer
             1%    loginwindow
             0%    Cubby
             0%    fontd
             0%    blued
    Top Processes by Memory: ℹ️
        524 MB    AppTrap
        455 MB    softwareupdated
        429 MB    mds_stores
        215 MB    QuickLookSatellite
        206 MB    com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
        115 MB    Free RAM
        3.19 GB    Active RAM
        3.10 GB    Inactive RAM
        1.48 GB    Wired RAM
        8.72 GB    Page-ins
        10 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 29, 2015, 09:28:33 PM    Self test - passed
        Mar 27, 2015, 07:47:02 PM    /Library/Logs/DiagnosticReports/blued_2015-03-27-194702_[redacted].crash
        Mar 27, 2015, 05:39:56 PM    /Users/[redacted]1/Library/Logs/DiagnosticReports/garcon_2015-03-27-173956_[red acted].crash
    Thank you in advance for any support you can offer here.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1309 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 500 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 50 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %d more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'size (B): %d\n    '"${k[22]}"'checksum: %d\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt|xpc)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt|xpc))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { if(a[2]) next;split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"stat -f%z "F|getline S;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,S,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/ .+:/||!b) b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/://;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub(/["\\]/,"",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^  |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;} END { if(i) print h;for(j=0;j<'${p[24]}';j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' ' {o=o"\n"$0} NR==6{p=$1*$5} END{if(p>'${p[27]}'*10^6)print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics codesign lockstat );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|succ|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pa(gin|us)|Purg(ed|in)| err|Refus|s ful|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*{,/*} .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} '~ "kMDItemKind=Package"' '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |gnment |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '/A* -type d -name *.app -prune ! -user 0' -vv '-D1 -IPRWck -s5 sleep 1' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}\ services\ {load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages Modifications );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;B2&&D0 45 90 124;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 38;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;A1 4 88;D5 77 44 89;D4 7 11 6;D0 0 N1+18 109;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

    My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Yosemite on MacBook Pro retina freezes halfway on boot up

    Hey all,
    I an currently using a MacBook Pro Retina 2013 13" running on OSX Yosemite 10.2. Ever since I installed Yosemite my Mac will often freeze when booting up and the loading bar will stop right in the centre. I have tried reinstalling Yosemite but still the problem persists. Any ideas? Thanks!

    Startup Issues - Resolve
    Startup Issues - Resolve (2)
    Startup Issues - Resolve (3)

  • MacBook Pro Retina Late 2013 UI Lag after installing Yosemite

    Hey everyone,
    Ok so my Issue here, and I think I'm not the only one but my MacBook pro retina late 2013 (8GB ram, 256gb SSD) has been experiencing numerous issues after installing Yosemite. For example, the UI lag is at times horrible; after opening several apps, and especially after having a pdf or two open in preview everything becomes so sluggish. the animation of switching to mission control is painstakingly slow, and opening new tabs in safari takes 2 or 3 seconds. I've done a clean install of yosemite but nothing seems to help, what should I do; just revert back to mavericks and cross my finger for a future update?
    Any help would be much appreciated, thanks so much !

    i am in the same situation as you, late 2013 retina MacBook Pro 15 inch upgraded to yosemite and then clean installed yosemite b/c of UI lag after opening several apps at once... I found that yosemite drained my battery life too, on mavericks i was getting 5-8 hrs of battery life, on yosemite i was getting like 2-3 hrs most.
    After exhausting every option out there (apple store genius bar help, apple repair, etc), I came to the consensus that my macbook had no hardware problems at all, it's basically a software problem on apple's end.  and until they update yosemite with a specific fix for the UI lag and the battery consumption problems, i am not going back to yosmemite. 
    what i did was clean installed back to mavericks... this solved every one of my problems, NO LAG, NO BATTERY ISSUES, back to buttery smooth performance, of course without the new UI however... but i can live without new design
    this experience tells me several things: 1. the new apple under the leadership of cook is slowly but surely sacrificing quality of software for unnecessary updates(sales) 2. mac hardware is still good but who knows for how much longer

  • Is it possible to virtually bypass the battery on a macbook pro (retina 2014) and power the mac directly via AC power?

    Is it possible to virtually bypass the battery on a macbook pro (retina 2014) and power the mac directly via AC power?
    E.g. Dell allows you to plug the laptop into AC power but prevent battery charging.
    Note: I do not want to physically remove the battery.
    If there isn't an option on Mac OS, is there anything I can download to bypass the battery when I want?

    Thanks for linking me! Wow I had no idea the clock speed would be cut so severely! What a bunch of rubbish, as if the AC won't provide enough power!
    I guess the only solution to my question would be an app which virtually disconnects the battery but tricks the mac into thinking the battery is still connected. I'm just surprised Apple haven't yet started to build prisons for the government - considering how well they lock up their software and hardware!

  • MacBook Pro Retina 15-inch battery life on Yosemite

    Has anyone noticed impact on the battery after upgrading to Yosemite? I found only one article online that talks about the impact. I followed the instructions but still the battery life did not improve. I'm running MacBook Pro Retina Late 2013, 15-inch, 2.6GHz Core i-7, 16GB RAM.
    I think that I should be getting more than 8h of life when fully charged.
    Link to article on iMore.com: http://www.imore.com/how-resolve-battery-life-troubles-your-retina-macbook-pro

    So here is an update: I've followed the article posted by OGELTHORPE (Thank you!). What I actually did is 1. Reset the SMC and 2. Reset the PRAM (MacBook Air SMC and PRAM reset).
    What I've seen so far: Once I did the reset, I would guess that the system needed to re-calcualte again the battery charge. Initially after I disconnected from power, it started with a measurement from under 3:30h. After 45 minutes running on battery it is showing again 8:45h remaining  @ 93% charge. What I noticed is that every time I put the laptop to sleep this repeats - starting with some low time measurement and slowly climbing. I think that this could be a bug in the software and the battery charge calculation method is somehow not working properly. I wonder after those resets if the OS needs to get into a couple of battery charge cycles and the battery is calibrated again?
    I don't recall having this issue with the last year's release of Mavericks.
    I hope someone from Apple sees this and address this with the next OS X update.

  • Macbook Pro Retina and Yosemite Video Corruption?

    So I have a Macbook Pro Retina (mid 2012), 2.7ghz i7, 16gb ram, which has the NVIDIA GeForce GT 650M 1024 MB video card and integrated video.  I am running Mac OS X Yosemite 10.10
    I have been experiencing a lot of video corruption in different applications, it doesn't seem to be limited to just one application or two -- it is happening in Safari, Mail, Photoshop, and others.
    I am attaching screen shots to show:
    Here is a video when it decides to flash weird video garble:
    Link to video:  https://www.youtube.com/watch?v=j8RAyj9L_nQ
    Has anyone experienced this same problem?  is there an official name or description for what is going on?  Is there a fix?  It is quite frustrating. 

    I have the same problem with my older white Apple Wireless Extended Keyboard, which had been working fine with my 2009 iMac. But I experience the issue sporadically with my new Mac Mini. I've read reports of people resolving some BT issues by turning off "Allow Bluetooth devices to wake this computer" in the Advanced pane of the Bluetooth System Preferenes Pane.
    There are also people having the issue on iOS devices using various Apple BT keyboards. No help, but interesting to note that it's happening across various devices, keyboard models, and OSs.

Maybe you are looking for

  • Fiori Launchpad Error: Failure - Unable to load groups Resolved!!!!

    Hey Good Fellas, This is a solution rather than a discussion, which i thought to do to with a kind generosity of spirit to give back to the community. It gives me immense pleasure and happiness to write this particular post, because it is through SCN

  • How to get to 32-bit mode in Photoshop on Yosemite

    Having a problem. I need Photoshop to run in 32-bit mode in order to access "Lighting Effects". Photoshop users will know what I'm talking about, it's unavailable and greyed out in 64-bit mode. But I don't see the option to select it. My understandin

  • Hard drive died!! How to start from square one??/ HELP!!

    Hi frens, My hard drive containing all my ipod stuff died and i had to replace with a new one. Now, if i were to connect my itunes with the new hard drive- what wld possibly happen and what should i do before connecting it? Please help, i dont wish t

  • Satellite Pro A200-16YT - Wireless adapter card upgrade to 802.11n

    Satellite Pro is A200-16YT (PSAE1E) with Windows XP Professional SP3. I have been trying to increase my existing 54 Mb/s wireless network speed by replacing the existing Atheros AR5007-EG 802.11a/b/g with the faster 802.11n adapter. The Atheros drive

  • How to include both items and service on Sales Orders

    Hello experts, I have a client who wants to include extra handling charges such as gift wrapping charges on their sales order in addition to regular items that is on the sales order. If I create the sales order as a Item/Service Type ='Service'. I ca