Mac OS10.8.3 and CS6 Bridge question

In CS 6, when I go to "File" > "Browse in Bridge" on the drop down menu, "Browse in Mini Bridge" is  always highlighted in blue, along with "Import" and  "Automate" and "Scripts".  Other options including "Browse in Bridge" are available, but not highlighted in blue. 
I have no clue why these options are highlighted as I never have used any of them in the other versions of PSCS I've used, as I much prefer just "Browse in Bridge". .  Is there any way to remove the highlight on these options, (but NOT remove the options)  ? It isn't a BIG deal, just annoying.
Hope someone can enlighten me ~
Thanks... Carolyn

Yes, you are right.  This is more of a Photoshop question, and I appreciate your calling it to my attention.  I did do as you suggested, but was unable to uncheck "What's New" in PS6.  I tried a dozen times, and no matter what I do, it just won't uncheck. 
I have actually posted this qustion on the dpreview.com Retouching Forum and Mac Forum, but yours is the first answe I've received in several days.  So I appreciate your trying to help, and give you a "yes" for alerting me to my error in thinking it was a Bridge question. 
Like I mentinoed, this is not a critical problem, just an annoying one.  There are a LOT of options that are highlighted, but the one on "Mini Bridge' just hits me in the face everytime I get on PS and want to just "Browse in Bridge". It's like someone trying to make you buy something you don't want ! :-)  I guess I'll just have to get used to it !
Thanks again for trying to help
Carolyn

Similar Messages

  • Mac OS 10.8.3 and CS6 Bridge question

    In CS 6, when I go to "File" > "Browse in Bridge" on the drop down menu, "Browse in Mini Bridge" is  always highlighted in blue, along with "Import" and  "Automate" and "Scripts".  Other options including "Browse in Bridge" are available, but not highlighted in blue.
      Is there any way to remove the highlight on these options, (but NOT remove the options)  ? It isn't a BIG deal, just annoying.
    Hope someone can enlighten me ~
    Thanks... Carolyn

    Hi Carolyn,
    I have moved this discussion to the Photoshop General forum where you should be able to find better help.

  • Is there an external hard disc that will work with Mac OS10.4.11 and Windows Vista?

    Is there an external hard disc that will work with both Mac (OS10.4.11) and Windows (Vista)?

    For NTFS on Mac, there are both open-source and commercial solutions. See:
    http://www.macupdate.com/find/mac/NTFS
    For HFS+ Drivers for Windows, there is only one:
    http://www.mediafour.com/products/macdrive
    Regards.

  • Downloaded Firefox 4 to my Mac OS10.5.8 and now can not open Firefox.

    Downloaded Firefox 4 to my Mac OS10.5.8 and now can not open Firefox. The processor is 1.25 GHz Power PC G4 and 768 MB DDR SDRAM memory. Is it possible to go back to an earlier version that was running very well on my Mac?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • Mac os10.6.8 photoshop cs6 のcamerarawでキヤノンの70Dや7Dmk2のrawファイルを現像する方法はありますでしょうか?

    mac os10.6.8 photoshop cs6 のcamerarawでキヤノンの70Dや7Dmk2のrawファイルを現像する方法はありますでしょうか？

    一般的にはassauseさんの回答でいいのですが、Camera Raw 8.4以降は対応OSが限られているようです。
    Camera Raw 8.4 を削除して 8.3 をインストールする（Windows Vista/XP | Mac OS X 10.6）

  • Nikon D800 "and" CS6 Bridge Preview

    Mac Pro, 10.7.5, Adobe CS6 suite recently updated. I am encountering problem of viewing images from Nikon D800 in Bridge Preview. The image thumbnails are displayed in Content, and able to open images in Camera Raw and Photoshop. What do I need to do to view images in Preview once selected from Content? -Rob

    Thanks for the tip. However the problem "corrected" itself. I think after updating, Bridge had to reset/refresh. I now see any selected images from Content in the Preview panel/window. The problem was that if clicked on image in Content, I wouldn't see anything in Preview. Thanks for that purging tip. That might come in handy.

  • CS6 Bridge question

    Bridge has begun giving me problems. After Bridge opens it takes 3 minutes or so to display the location selected.  Then it takes another three minutes to open a folder, another three minutes to open a file, etc. etc.  With my current setup it is taking 15 min to open a photo.  I have deactivated the program on this computer, uninstalled, and reinstalled it.  No change in behavior.  There are several available updates for CS6 but they will not install.  I get error message D44M1I200.  Can anyone help?

    We can't know. You have not provided any system information or other details. Standard procedure would be to simply reinstall the software after running the cleaner tool.
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    Mylenium

  • I am running CS5 on my MAC OS10.6.8 and I want to upgrade my OS to 10.8 or 10.9. Will my CS5 continue to work and do I have to reinstall anythig?

    I am running CS5 on my MAC OS 10.6.8. I want to upgrade my OS to 10.8 or 10.9. Will my CS5 work and do I have to do anything to keep it working when I install the new OS?

    It should upgrade fine.
    Worst case is you'll need to run the Adobe Cleaner Tool (link below), then reinstall from your original discs:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • How do I sync calendars between Mac (OS10.6.8) and iPad (iOS7.1)? using iTunes (v 11.1.15).

    I have an iMac (model 8.1, OS X v 10.6.8) and an iPad 2 (iOS 7.1).  The calendars no longer sych via iTunes but did about 6 months ago. I think that may have been when I updated the iPad OS.  None of the instructions I've seen on-line seem to help. When I attach the iPad to the iMac via a USB cable I get the following message in iTunes - > Info - >Sych Calendars, "Your calendara are being synced with your iPad over the air from iCloud. Over the air settings can be changed on your iPad."  I do not have an iCloud account.  According to the Apple Support website, "To use iCloud, you must have at least iOS 5 on iPhone 3GS, iPod touch (3rd generation), iPad, or iPad mini; or at least OS X Lion v10.7.5 on a Mac." I'm not sure my iMac can support that OS due to its age.  Besides, I used to be able to sync the calendars so why bother with iCloud?  It just seems like one more step.
    Also, I've never been able to sych the mail content between the two machines.  The message below the iTunes->iPad->Info ->Sync Mail Accounts says, "Syncing Mail Accounts syncs your account settings, but not your messages...."  Any instructions on how to sync the messages would be appreciated too.
    It's frustrating to have these syncing challenges.  I had a Palm Pilot at work about 15 years ago and and it synced with the PC any time I put it into the docking cradle.  Same thing with a work-issued Blackberry about 10 years ago.  I'm disappointed that the Apple systems seems to be so convoluted and un-user friendly.  Syncing calendars worked when I orginally got the iPad about two years ago but now doesn't seem to sych.  What am I missing?  Thanks in advance.

    Hi crispinfromab,
    If you are having issues syncing your calendars via USB, you may find the following articles helpful. If you do not have an iCloud account or don't intend to use it for syncing, you may also want to make sure that iCloud syncing is turned off on your phone (under Settings > iCloud).
    iOS: Syncing your data with iTunes
    http://support.apple.com/kb/ht1386
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296
    Regards,
    - Brenden

  • Power Macintosh 7200 to Mac Mini back up and secure wipe question

    Hi all, nearly figured this on my own but hope that someone here can fill in the gaps.
    I have a clunky old 7200/75/16 (no upgrade card, bog standard machine) I want to sell/give/dump.
    Before that, I need to back up the 500 MB HDD (hard to believe that was big once, now looking at a 500 GB HDD for the new machine!) and then secure wipe it.
    I've learned that I can get halfway there with a crossover cable and Apple Talk. So far, so good.
    Now, how about the secure wipe? I've had a look but I've not had any success in finding a how-to.
    I have a feeling I can't use Disk Utility in Leopard for this, but maybe I am wrong.
    Advice is sought from anyone here that can share their expertise on the best way to go.
    A cheap/free solution (that doesn't destroy the machine) would be welcomed!
    If relevant: I don't have the installer floppies for the 7200. I unwisely bought the machine without them but vaguely recall from an earlier Macintosh that Disk First Aid had some kind of format facility though I doubt it was far from secure by today's standards. I figure I can find a set of installer disks on eBay to get the 7200 operational again once I've completed this chore...

    I've learned that I can get halfway there with a crossover cable and Apple Talk.
    File sharing via AppleTalk cannot be used with the most modern operating systems. You should be able to use TCP/IP. A third-party program may be of interest. Also, see this article for some general information.
    Now, how about the secure wipe?
    One could use Drive Setup (a 1.7.3 version is available for download) for this. Under the Functions menu you will find Initialization Options, where "Zero all data" can be chosen. However, the program has to run from another disk (such as a bootable floppy). It is possible to create and modify a startup floppy on the 7200.
    A third-party application such as Wipe Info (part of Norton Utilities, commercial) or Burn 2.5 (freeware) could be used, too.
    If relevant: I don't have the installer floppies for the 7200.
    The Disk Tools PPC (here) is one thinkable startup floppy for the Power Macintosh computer in question. If necessary, a complete System 7.5.3 (e.g., the International English version here) can be downloaded from Apple.
    Jan

  • More Mac OS 10.2 and iPod nano questions

    I did a search and found that other people were able to get their iPod nanos to work using 10.2.8, so I decided to give it a try. How did you do this? When I plug it it in, the iPod just flashes "Do Not Connect" and when iTunes tries to open, I get this error message:
    "The iPod "iPod" cannot be used because it requires iTunes version 7.0 or later. Go to www.itunes.com to download the lastest version of iTunes or install iTunes from the CD that came with your iPod."
    What do I do next to make it run with the USB 1.1 ports on OS X 10.2? I have iTunes 6.0.4.
    Please help! Thanks!
    p.s. I'm starting to get really irritated with Apple. Leopard was supposed to be released late 2006/early 2007. I got this iPod back in Nov last year as part of a promotion. Since I thought Leopard's release was right around the corner, I held out and tried to be patient. Then it was changed to spring 2007. And I thought, well, I've waited this long; another month or two won't kill me. Now it's October 2007??? WTH, man. If I knew it was going to be a full YEAR before I could have used my iPod, I would have just bought Tiger back then. Torture, I tell you.

    I didn't say all Nanos wouldn't work on the earlier system. What I was implying was YOUR Nano, which came out AFTER iTunes 7 was releases, has updated firmware that requires iTunes7.
    I had the same issue with my two video iPods. My 30GB was purchased back in the iTunes 6 days and worked fine on my computer. A year+ later my wife upgraded me to an 80GB (so she could also take possession of the 30GB) which came out after iTunes7. So when I plugged that one in, it refused to work with iTunes 6 and required iTunes 7.
    This is something Apple does with a lot of their hardware. For example, most Mac computers are ROM locked to only be able to run the Operating system they shipped with or higher. So you can not take my OS 10.3 eMac and try to load 10.2 onto it. It won't go. Same with the iPods. If the iPod came out when iTunes 6 was the release, they will work fine with iTunes 6 or iTunes 7, but if they came out after the release of iTunes 7, they tend to be locked to iTunes 7 or higher. This is why you often see the simultaneous release of a new version of iTunes when there is a major update or new release of an iPod model.
    Patrick

  • How do I shut off the plug in. I using mac OS10.4.11 and I keep getting a bar to update my plugin. The plugin will not work with os10.4.11. Everytime I go to a

    every time I go to a new site a bar is lowered and ask to update my plugin. I am using mac 10.4.11 G4 The new plugin will not work. How do I shut off the plugin update so I don't get this anoying bar ever time I go to a new web page. If there is no way to shut it off, I'll trash Firefox and go back to Safari. This just started and I'm tired of it.

    to turn off the messages about outdated plugins, enter "about:config" into the address bar of the browser, confirm the info dialog, then search for the preference named "plugins.hide_infobar_for_outdated_plugin" & double-click it in order to toggle it to "true".
    please also note that firefox 3.6.28 was the last build that ran on a powerpc, however if you want to use an up-to-date browser based on firefox you can switch to "tenfourfox" - the downside is it doesn't support plugins at all
    [[Firefox no longer works with Mac OS X 10.4 or PowerPC processors]]

  • Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

    Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

    I am using Mac OSX 10.10.1 (memory 8 GB 1600 MHz DDR3, graphics Nvidia GeForce GT 650M 1024 MB)
    and my version of Photoshop is CC.
    I ran into  the same problem: I am able to place and view Blur Gallery pins but the adjustment wheel or outer control arounf the pin that allows you to tweak the blur value disappeared after being initially available. Additionally, the placed pin or pins appear to flicker on screen (while in blur gallery mode) until committing the change with the OK button. I have tried restarting both the computer and Photoshop, as well as what some other users have suggested such as View>Show>Edit pins turned on. Nothing has helped so far. I am still able to adjust the blur amount  from the Blur Tools slider. thank you.

  • I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

    I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

    If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
    Then File menu > Browse in Bridge will bring up Bridge CS6.
    If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
    I hope that's the answer you were looking for.
    Gene

  • Adobe Bridge CS5 and CS6 need to uninstall

    I have Adobe Bridge CS5 and CS6 that I need to uninstall off my mac I do not have Adobe Uninstall in the Utilities folder. Question how do I uninstall the applications

    Question how do I uninstall the applications
    CS6 uninstall is in the folder of Photoshop itself in the applications folder, I suspect CS5 also has this but can't check myself.

Maybe you are looking for