Mac OSX 10.4 visual displays problems with a 20 inch Symphonic telvision

I would like to use my tv as a monitor for my Mac (details in subject title), but I have been having some issues. To be perfectly honest, I am completely new to this subject on computers. On my Mac, I have 4 ports that I think I might be able to use. These are the TV OUT port, the S VID IN port, the yellow video in port, and the last one I dont know what it is called. (It has lines by it that turn in different directions with little circles on the end of them). My television only has the basic yellow video port and the two white and red audio ports. Is there any way I can connect my Mac to my tv?

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

Similar Messages

Display Problem with my Mac Pro and LG Flatron Wide Monitor in Mountain Lion

After upgrading to Mountain Lion, my Mac Pro has display problems with my LG Flatron display. The image is displayed with a black bar on the right and on the bottom. And the left side of the content is not visible. I tried every resolution available in the Display System Preferences, they are different in terms of how big the black bars are, and what part is not visible, but none of them are correct. I held down the option key to try to detect displays or switch to resolutions that are not normally available. When I restart the image is lined up with the display, but if the display ever goes to sleep or gets turned off, the image reverts to being off center, and the only way I can get it back is to restart... The interesting thing is that this monitor works fine with the same machine if I reboot using BootCamp into Windows 7. The Monitor also works fine, connecting the same connector to a Mac Mini, although that mac mini is running 10.6 and not Mountain Lion. I've reset the SMC and restarted countless times, I don't see any other levers to pull or things to try...

That card is for a PC it may not give you Startup and Option-Boot screens.
The 7950 "Mac Edition" card has a very distinctive look:
http://www.sapphiretech.com/presentation/product/product_index.aspx?cid=1&gid=3& sgid=1157&pid=1777&psn=&leg=0&lid=1

Fonts display problem with Entourage

Hello,
I am a new Mac user, having just migrated from Vista to iMac. I love my mac but I am experiencing a problem with how Entourage is displaying some of my emails.
They display as weird caracters and symbols, but not all of my email does this, just some. The individual characters display with "V' over some of them, and the sizes are all over the map and it is hard to read. However, if I copy and paste into another program, it displays normally. I'm stumped! I hope a more experience Mac user can help me with this.
Cheers!
~Pauline

They display as weird caracters and symbols, but not all of my email does this, just some.
It's probably caused by a bad font. If you have Times Phonetic, get rid of it. Send me a screenshot if you want (tom at bluesky dot org).

Have iphoto 9.0 working on a mac osx 10.7.4 yesterday ilife with idvd was downloaded into my mac,i can't open my iPhoto now its telling me to update app, but when i do it says no new updates are available at this time,and iPhoto update mesg pops up again.

Have iphoto 9.0 working on a mac osx 10.7.4 yesterday ilife with idvd was downloaded into my mac,i can't open my iPhoto now its telling me to update app, but when i do it says no new updates are available at this time,and iPhoto update mesg pops up again.

Hi,
I scoured the web looking everywhere for a solution to this.
Exit Code 15
OSX 8.5 with Work@Home DVD media for CS6
I followed instructions to run 3rd party cleaner software
I tried the adobe removal tool
removing all copies of adobe software manually
installing from a new account, safe mode, plist everything suggested that i found did not work.
A colleague suggested that removing the below folder would allow the installation:
/Library/Application Supports/Adobe
They turned out to be correct, so i am passing this on, because this took far too many hours of my time.
Cheers,
Smokey

External Display Problem with x301

Hi everybody,
I have a external display Problem with my x301.
Ether direct attachment or via Lenovo USB Display Port Device, the external monitor (22" Benq LCD) starts to flickr after a couple of minutes and the external display shuts off.
Any ideas on this?
Thanks a lot
Chris

i have the same problem with X200 and the X200 ultrabay Docking station.
No idea yet ...

We have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions

we have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions?

Back up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

I have macbook 5,2 mac osx 10.5 leopard, my problem is every 60 sec. there is pop up on desktop ,restart, sleep, cancel, and shut down and desktop dim also like sleep mood or hibernate mood, i try already to adjust the screen saver to longer minute but

i have macbook 5,2 mac osx 10.5 leopard, my problem is every 60 sec. a pop up on desktop restart, sleep, cancel, and shut down and the desktop dim also i already adjust the sleep time to longer time but nothing happen, and every time i shut down my laptop he go restart again i canot of my laptop, i shut down and before he restart again i push the power botton the laptop is off and if i start my laptop not start 2 to 5 time i remove the battery again fix then laptop start. any body can help me about this problem may only the setting but i dont have idea..... please help thanks

i think i find solution.
after instal baytrail driver, without restart i instal gpu driver direct from intel
https://downloadcenter.intel.com/search?keyword=Intel%C2%AE+HD+Graphics+for+Intel%C2%AE+Atom%E2%84%A...
work fine for now...

Display problems with Kwin on intel hardware

Hi all,
Since the latest update of xorg and intel drivers, I have a display problem with kwin's expose-like feature. Before I file a bug,
- Is anyone experiencing the same problem? Do you have a workaround?
- Does anyone know what could be at fault?

lardon wrote:
panosk wrote:Indeed... If you want to fill a bug report right now go ahead, otherwise I have to get to my laptop in a few hours to check logs and post a report then. BTW, could you also try Ctrl+F11 and rotate the cube for a while? You should notice some flashes and very bad performance, even with direct rendering.
I will, and I hope you'll contribute your logs to the bug report! The question is where to submit it: I'm pretty sure the bug is upstream, but is it a kwin bug or an xorg/intel bug?
Ctrl+F11 works "fine" on my system, even though it crashed kwin the first time I tried it :-)
Well, that's a very tough question! I was thinking to fill a bug report in Arch's bugtracker, although I also think it is an upstream bug. Problem is, after reading this http://blog.martin-graesslin.com/blog/2 … paces-4-5/ and this http://www.itnewstoday.com/?p=1803, one can realize the absolute *Mes(s)a * that dominates the whole graphics stack....

External display problems with snow leopard

I just upgraded from Leopard to Snow Leopard on my Macbook and it's created lots of problems with my LCD external display:
- The display won't work at its native resolution (1680x1050) - it will flash up an image for 1/10 of second and then go black. I can only get it to work at a lower resolution, which looks AWFUL.
- If I try to start up my Macbook with the lid closed and the display connected, the display won't work at all (it jams on the start up screen). It only works if I keep both of them running
I never had these problems when using Leopard. I've searched lots of forums and found that many people are having similar problems with external displays. Apple still haven't fixed the bug after repeated efforts from people to get if fixed.
Here are some threads (now closed) on this if you're looking for solutions:
http://discussions.apple.com/thread.jspa?threadID=2132912&tstart=0
http://discussions.apple.com/thread.jspa?threadID=2136455&tstart=1
http://discussions.apple.com/thread.jspa?threadID=2132837&tstart=0
http://discussions.apple.com/thread.jspa?messageID=10084332
Common suggested fixes are:
- Force OS X to use LCD font smoothing (does not work for me)
- Clear the PRAM on start-up (does not work for me)
- Delete /Library/Preferences/com.apple.windowserver.plist (does not work)
- Change energy management setting to high performance (only works on graphics cards in Macbook 15" and 17").
From reading these forums it appears that this is a well-know bug. Has anyone else got any suggestions to fix this? And why hasn't Apple fixed this yet after so many people bringing it to their attention? It's clearly a bug that wasn't in Leopard.

I'M FED UP WITH APPLE! They've always been a little shady, but the last half of 2010 took the cake!
First it was the iPhone 3g "upgrade" to IOS4 which was garbage and killed my ability to use the 3g until I figured out how to crack the software, wipe the thing clear then reinstall the original software. Next up was purchasing the iphone 4 as a Christmas gift for someone running tiger on their mac, only to find out that the iphone 4 doesn't work on tiger when they tried to sync their contacts - and then having to rush out and purchase snow leopard so that they could enjoy my gift. Then I install Snow Leopard (note - I purchased the family pack) onto my own leopard-running(10.5.+) powerbook only to have the external LCD display I've been using for years suddenly stop working.
Oh, okay, to be fair, it works IF I RESIGN MYSELF TO SET it to "mirror image" (which defeats the purpose of having multiple displays) and drop the resolution down to a pathetic, unsharp, nearly distored setting that is almost painful to look at knowing that this monitor was just A COUPLE OF DAYS AGO showing me crystal clear images.
Then I exhaust myself trying to find a fix only to discover that APPLE in their infinite brilliance (AKA - their torture of loyal customers) knows of the issue - worked it out - then created an update that created the issue all over again. I'm so done! No more macs. I'm going back to the evil land of PCs. At least there, you know you're getting crap, it doesn't sneak up on you after getting you to trust it time and time again.

HP OfficeJet 4500 and MAC OSX 10.6.8 installation problem

I've recently bought a HP OfficeJet 4500 and I'm having problems with the Macintosh installation.
I'm on Intel Mac OS X 10.6.8 and I connected the printer to my iMac by using the USB cable.
The CD included with the printer is not readable, so I had to download the driver (OJ4500vG510a-f_Mac.dmg) from the HP website.
When I run the installer, the application is not able to recognize the device so no model is displayed in the list; then, I choose to continue the installation without specifying the model but when I have to do the configuration the installer is not able to find the correct device and so the setup procedure fails.
What I want is to use the printer wireless, so I think I should perform the configuration procedure and to specify that I want to use the Wi-Fi connection but I never reach this step because installer fails before.
I have to say that I successfully installed this printer on Windows XP and Windows 7 by downloading the drivers from the HP website and installing them without problems, but I'm not able to do the same thing with my Mac.
Can you help me, please?
What I have to do to get my printer work with my mac?

Hi,
I got the impression you are using the wrong software for your printer.
In order to get aligned, there are 3 sub models of the 4500 series:
HP Officejet 4500 Desktop (G510a) - Provide USB connectivity only. - The driver posted above intended for this model.
HP Officejet 4500 (G510g) - provide USB and Wired ethernet network connection
HP Officejet 4500 Wireless (G510n) - Provide USB and Wireless network connection,
As you mentioned the printer connected to the network, therefore I doubt if the correct driver has been used.
Above you may find a direct download link for both of the models
Simply click the model which identical to the one listed on the front of the printer,
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Video Display Problems with Flex Builder 2

I am currently trying out the Flex Builder 30-day trial and
have been having problems running the software.
System info:
FB 2.0.1
Dell Latittude D820 running WinXP
NVIDIA Quadro NVS 120M Video Card
When I first installed it, my display turned to garbage and I
had to reboot my machine to get it to a usable state. Someone
suggested changing my display properties and see if it helped. When
I tried 768X1024 with 8-bit color it worked. Once I installed it, I
changed them back to 1920X1200 32-bit. Everything seemed to work
fine until I started getting into some more complicated tutorials.
My display crashed and looked similar to what I saw before. I
updated to the latest NVIDIA driver from Dell. No help. I then
tried the Windows Troubleshooting. When I turned my hardware
acceleration to None, it started working again. There are some
weird display issues with menu buttons and I can't launch my Nvdia
software.
Is there a better solution to this? Has anyone had this
problem? I'm not so sure I'll purchase the software with this many
problems.
Thanks,
Wendi

Boys n Girls
I am Currently restoring my Power Book after a significant meltdown.
Thanks for posting I too saw the shearing effect but shrugged it off thinking oh well I'll just reboot!
If you are seeing this Buy a fire wire drive NOW and Back-up.
I suspect the Video update changed a low level feature in the power management routines and this resulted in my Power book cooking itself.
I've got a 12mth old Hitachi 7200 PATA drive in my Power Book after the Apple Drive cooked itself soem tim back and I have now got to back-up and restore my whole system. Luckiliy I have plenty of Big fast firewire drives around so I'm imaging the corrupt drive and going to run the Hitachi tool on it via a WINDOZE Thinkpad. Then a combination of clean install of 10.5.x and a migration assisted restore should do it.
I'm really not very happy though! My Time machine image did not restore and the disk repair did not work. I have a corrupted asl.DB ( the log file for Apple System Logs) and the mac won't boot from its internal drive.
I'll post the resolution here as it happens I'm at hour Disaster + 24 so I'm really cranky!
I suggest If you have a G4 Power Book you resist the temptation to install the video update.
Regards

Two display problems with my new MacPro! :/

I recently bought a new MacPro to replace my PowerPC, and am having some odd video problems I did not have with the old computer (yes, using same display). Here's some quick stats I think are important.
1. 30 inch Apple HD display (used on both computers.)
2. Old video card = Radeon X1900 - NEW video card = Geforce 8800 GT (came factory installed)
3. Old OS = 10.4.11 Tiger New OS = Leopard (with all current updates. Also factory installed)
4. Quicktime Pro on both systems fully updated
5. Both Machines had all updates installed at the time of this problem (which is since i got the new machine)
Here's the two problems...(btw NEITHER of these happen when the display is hooked up to the old computer. only the new MacPro with a different video card and OS)
1.) When I play back video (sometimes in FCP (all types of files), sometimes in QT (.mov), and sometimes even on youtube and vimeo (so those are .flv files!) only SOMETIMES do I get these odd vertical refresh-looking lines. It makes the video somewhat flicker and you can see them crawl upwards kind of. The odd thing tho, is if I play that art of the video over and over, at times it will happen, and at other times it will not. same file, same part. I also noticed it does NOT stay on the file when exported from FCP and burned to DVD, so I'm thinking it is purely playback.
2.) Some files when played back in quicktime will get extremely choppy. (Locally played files). I will then click the desktop to make finder the front most selected program...and the files will then play smooth. if I select the QT window again, it will get choppy and flicker again.
I feel like I have a refresh rate problem, or maybe even a driver problem. The thing is, of course the drivers are not updated outside of auto updates, and I have installed everything available there.
When I open up my display settings, the refresh rate box is grayed out...so changing the rate isn't possible. Also, with my old computer/video card, I had an ATI control panel...the geforce does not have one...only the build in OSX display control panel.
Has anyone heard of this? I have posted in a few different places, and have received absolutely no replies. It's really frustrating, and sitting on the phone for hours with apple support to have them say "never heard of that problem" or have me lug the **** thing into a apple store and be without my computer and unable to work doesn't sound fun either.
it's not stopping me from doing anything..it's just annoying and frustrating cause I can't make it stop. I'm thinking it might be a problem with the leopard drivers that hasn't been addressed yet? I dunno.
Any suggestions?
thanks in advance,
Damion

UPDATE ::
In reading an old solution on how to get rid of the dancing pixels I get every once in a long while on this display, I downloaded SwitchResX and am using the demo to test and see if switching the refresh rate to 58khz will help in the line problem...and lo and behold...it kinda does. it is now only noticeable on fast moving action when put into full screen mode.
The QT flicker problem has NOT gone away...but I'm expecting that the horizontal lines running vertical are a refresh rate problem as I had thought.
My question, anyone know if apple is aware/working on this?
Also, why is the refresh rate not changeable with the 20 inch HD display settings in the display control panel??
I'd much rather use OSX to control my display than a 3rd party application! :/

MAC OSX 10.4.7 - iMAC Problems

Started having problems.. after update..
On 6/28 - Using the SW update feature the system noted 3 updates ready for download:
Aperture (1.1.2)
QuickTime (7.1.2)
MAC OSX (10.4.7)
I selected continue and went about my business. When I came back I was prompted for a restart, which I completed with out any discernable problem.
The following day - My "Bluetooth" mouse dropped out and I couldn't get it to work - though the mouse was bad - went and purchased a new wireless USB version.
It semed to work ok. Setup to use my wireles Keybd today and couldn't get it to work...
After many attempst and battery replacement - I started suspecting problems with the last update.
Thought I would check and see if there was a new update - by selecting "Software Update" under the Apple - it started to load and crashed.
A couple of repeat attempts had the same result.
Now I was sure that the last update had some how not been successful.
Went to Apple Support site and downloaded the "Combo". It reported "mounting failed" after it completed the download. Tried the "Delta" the same result.
Checked the Log files and found that the Aperture & Quicktime updates were logged - but not the 10.4.7 (on the 28th). Yet "About this Mac" says 10.4.7 is loaded???
I ran the DIsk Utility "repaired permissions" retried Software Update - same problem. Repaired permissions again (they were corrupted from the Software Update attempt) and tried the Delta again - still no success (mounting failed).
Anybody have a clue - what to do next??

hi there valkre--
you might want to check out this post. http://discussions.apple.com/thread.jspa?messageID=2623881&#2623881. seems applejack fixed this guy's problem. here is a link for an applejack download, which is freeware. http://www.versiontracker.com/dyn/moreinfo/macosx/19596. this is from the versiontracker.com pages. hope that works out. [ 8 ) ]

After update mavericks osx 10.9.2 have problems with safari

after up[date to mavericks osx 10.9.2 safari is unresponsive and often prevents closedown. have had same problem with mac mail but perhaps sorted after advice thru this forum.

Go step by step and test.
1. Power cycle
     Power off the router. Unplug it from the wall. Wait a while.
     Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
     It will take a   while.
     Restart the computer.
     Start up in Safe Mode
     http://support.apple.com/kb/PH11212
2 Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
3. Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
      Click "Reset".
4. Safari > Preferences > Privacy > Cookies and all other website data:
     Press “Remove All Website Data” button
5. Turn off Extensions if any, and launch Safari.
    Safari > Preferences > Extensions

MBP 13 retina late 2012 - display problems with wifi

Hello!
I writing you about a problem i'm having since i bought my MBP retina in October 2012 but now that i'm in Russia is really worring me. I've been in a Genius Bar back at home in Italy but i couldn't show them the problem with the display because it was very occasionally and it never happened while i was in the apple shop. The apple genius run a kind of testing program and apparently my mac is ok. Now i also know that this problem happens only when the wifi is on. The display is flicking ( i hope this is the correct word) and actually it was just rarely in italy but since i'm in russia i can't use my mac while i'm connected because this problem is constant and much much stroger.
I noticed that the only way to stop this problem is to make a bridge with my finger from the alluminium chassis of the mbp to the black part at the bottom of the display. If i do this the flickering stops. So i'm somehow thinking it is an electric problem, and maybe in russia there is a different tension in the electricity or something else that makes this problem bigger.
I will also traveling for the next 5 months and so i can't bring my laptop to an apple store in italy. I don't know if i can bring it to another apple store around the world to fix the problem, and i don't know if i will have a 2 years warranty like i have in italy.
I'm very angry with the genius i've been in italy because he didn't believe my problem and he didn't investigate further. I was there in April or May and i still had the first year warranty. Now i'm traveling for the next 5 months and i super need my mac because i'm a travel blogger and as u can understand it is very important for me.
I hope someone can help me.
Thank you
Dan

thanks! yeah i recorded it so i hope they will take the problem more seriously.
Unfortunately i don't have an applecare protection plan, but i hope that the proof that i've been in an apple store for the same issue already in april will help me somehow.
I also think that when i touch with my hand both chassis and display i make some connection working again. Maybe i'm the radioactive man, or i have some special powers...or for the first time time in my life i bought a bugged apple product. But i think is more possible one of the first two options!

Mac OSX 10.4 visual displays problems with a 20 inch Symphonic telvision

Similar Messages

Maybe you are looking for