Mac osx 10.5 server unlimited on usb

hi
my xserve g4 for model lost his superdrive cable so i can't install software from dvd's, i placed my new osx leopard software on a usb (16gb).
when i insert the usb the xserve sees it as a usb (16gb), i think thats normal right?. when i open the file on the xserve, the xserve sees it as software, just like normal you get a window with 3 options: install, documentation and other installs, when i click install osx, i get a pop up window with a big grey X on it, and right under it says that i need to restart, with a restart button. when i click that button, my mac restarts but it will not launch the installation, just like i normally start it up. so how do i install the software, my xserve runs 10.3.9 now and thats so old. , i visited every pc store in my city but no one has that required cable, even the premium reseller doesn't know where to get it.
i want to run it as a "studio mac" with logic pro or something like that, so i am looking for a firewire audio interface to, so if you know a good one please tell me.
ooh yeah if someone says its loud, he isn't it nomore, i did something on the connect board from the mobo to the hdd board and the procesoor fan runs much slower now, and the server monitor says: rpm is good (green dot) and the temperature is good (green dot), when i launch some app's it doens't get hot or something just normal temperature
greetings me

Do you mean a firewire flash drive?. Are there othet ways, like copy the software to the hdd and install it from that drive?
By the way thanks for your fast answer

Similar Messages

  • Hi I am getting below error on my MAC OSX 10.6 Server

    Hi,
    I am getting below error on my MAC OSX 10.6 server MAC Pro machine.
    Please let me know what this means?
    Interval Since Last Panic Report:  8518861 sec
    Panics Since Last Report:          1
    Anonymous UUID: F1F85B83-6DC2-4E6C-B02C-D1D42F15F321
    Wed Jan 25 16:22:19 2012
    panic(cpu 3 caller 0x2abf6a): Kernel trap at 0x00926b00, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x00000054, CR3: 0x00100000, CR4: 0x00000660
    EAX: 0x00000000, EBX: 0x080a7600, ECX: 0x00000000, EDX: 0x098da5a4
    CR2: 0x00000054, EBP: 0x56e8be78, ESI: 0x098da500, EDI: 0x080cf800
    EFL: 0x00010202, EIP: 0x00926b00, CS:  0x00000008, DS:  0x080c0010
    Error code: 0x00000002
    Backtrace (CPU 3), Frame : Return Address (4 potential args on stack)
    0x56e8bc88 : 0x21b837 (0x5dd7fc 0x56e8bcbc 0x223ce1 0x0)
    0x56e8bcd8 : 0x2abf6a (0x59e3d0 0x926b00 0xe 0x59e59a)
    0x56e8bdb8 : 0x2a1a78 (0x56e8bdd0 0xcc5c600 0x56e8be78 0x926b00)
    0x56e8bdc8 : 0x926b00 (0xe 0x98d0048 0x56e80010 0x530010)
    0x56e8be78 : 0x927ff8 (0x98da500 0x80a7600 0x5000 0x0)
    0x56e8bec8 : 0x98b7aa (0x98da500 0x80cf800 0x2 0x0)
    0x56e8bf08 : 0x98e014 (0x8086c00 0x8087f9c 0x0 0x807d580)
    0x56e8bf28 : 0x552ea6 (0x8087c00 0x0 0x0 0x4fbef7e4)
    0x56e8bf88 : 0x552eea (0x8087f80 0x8087f80 0x0 0x1)
    0x56e8bfc8 : 0x2a179c (0x8087f80 0x0 0x2a17ab 0x7e0d564)
          Kernel Extensions in backtrace (with dependencies):
    com.ATTO.driver.ATTOCelerityFC(3.4.6)@0x943000->0x99afff
                dependency: com.apple.iokit.IOSCSIParallelFamily(2.1.1)@0x923000
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x92c000
    com.apple.iokit.IOSCSIParallelFamily(2.1.1)@0x923000->0x92bfff
                dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.6.8)@0x909000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: MacPro1,1 (Mac-F4208DC8)
    System uptime in nanoseconds: 1825402534727490
    unloaded kexts:
    com.apple.iokit.IOUSBMassStorageClass   2.6.7 (addr 0x1284000, size 0x49152) - last unloaded 1132024965088576
    loaded kexts:
    com.ATTO.driver.ATTOCelerityFC       3.4.6
    com.apple.filesystems.smbfs       1.6.7 - last loaded 267231229373759
    com.apple.filesystems.afpfs         9.7.1
    com.apple.nke.asp_tcp       5.0
    com.apple.driver.AppleHWSensor       1.9.3d0
    com.apple.filesystems.autofs       2.1.0
    com.apple.driver.AppleUpstreamUserClient          3.5.7
    com.apple.driver.AppleMCCSControl  1.0.20
    com.apple.driver.AppleHDA        2.0.5f14
    com.apple.driver.AudioAUUC     1.57
    com.apple.GeForce   6.3.6
    com.apple.Dont_Steal_Mac_OS_X     7.0.0
    com.apple.driver.AudioIPCDriver         1.1.6
    com.apple.driver.AppleMCEDriver       1.1.9
    com.apple.driver.AppleIntelMeromProfile     19
    com.apple.driver.ACPI_SMC_PlatformPlugin       4.7.0a1
    com.apple.driver.AppleLPC         1.5.1
    com.apple.iokit.SCSITaskUserClient   2.6.8
    com.apple.BootCache        31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage  1.6.4
    com.apple.driver.AppleIntel8254XEthernet  2.1.3b1
    com.apple.driver.AppleFWOHCI 4.7.3
    com.apple.driver.AppleUSBHub 4.2.4
    com.apple.driver.AppleAHCIPort          2.1.7
    com.apple.driver.AppleIntelPIIXATA     2.5.1
    com.apple.driver.AppleEFINVRAM      1.4.0
    com.apple.driver.AppleUSBEHCI         4.2.4
    com.apple.driver.AppleUSBUHCI         4.2.0
    com.apple.driver.AppleACPIButtons    1.3.6
    com.apple.driver.AppleRTC         1.3.1
    com.apple.driver.AppleHPET      1.5
    com.apple.driver.AppleSMBIOS 1.7
    com.apple.driver.AppleACPIEC  1.3.6
    com.apple.driver.AppleAPIC       1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient     142.6.0
    com.apple.security.sandbox         1
    com.apple.security.quarantine     0
    com.apple.nke.applicationfirewall         2.1.14
    com.apple.driver.AppleIntelCPUPowerManagement     142.6.0
    com.apple.driver.AppleProfileReadCounterAction         17
    com.apple.driver.DspFuncLib      2.0.5f14
    com.apple.driver.AppleProfileTimestampAction   10
    com.apple.driver.AppleProfileThreadInfoAction    14
    com.apple.driver.AppleProfileRegisterStateAction        10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction       20
    com.apple.nvidia.nv40hal    6.3.6
    com.apple.NVDAResman  6.3.6
    com.apple.iokit.IONDRVSupport 2.2.1
    com.apple.iokit.IOFireWireIP       2.0.3
    com.apple.iokit.IOSurface   74.2
    com.apple.iokit.IOBluetoothSerialManager  2.4.5f3
    com.apple.iokit.IOSerialFamily    10.0.3
    com.apple.iokit.IOAudioFamily    1.8.3fc2
    com.apple.kext.OSvKernDSPLib         1.3
    com.apple.driver.AppleHDAController 2.0.5f14
    com.apple.iokit.IOGraphicsFamily        2.2.1
    com.apple.iokit.IOHDAFamily      2.0.5f14
    com.apple.iokit.AppleProfileFamily      41
    com.apple.driver.AppleSMC        3.1.0d5
    com.apple.driver.IOPlatformPluginFamily     4.7.0a1
    com.apple.driver.AppleUSBHIDMouse         162
    com.apple.driver.AppleHIDMouse        162
    com.apple.driver.AppleUSBHIDKeyboard    141.5
    com.apple.driver.AppleHIDKeyboard   141.5
    com.apple.iokit.IOUSBHIDDriver          4.2.0
    com.apple.iokit.IOSCSIBlockCommandsDevice  2.6.8
    com.apple.driver.AppleUSBMergeNub         4.2.4
    com.apple.driver.AppleUSBComposite        3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice   2.6.8
    com.apple.iokit.IOBDStorageFamily    1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily    1.6.1
    com.apple.driver.XsanFilter         402.1
    com.apple.iokit.IONetworkingFamily    1.10
    com.apple.iokit.IOATAPIProtocolTransport  2.5.1
    com.apple.iokit.IOFireWireFamily        4.2.6
    com.apple.iokit.IOUSBUserClient         4.2.4
    com.apple.iokit.IOSCSIParallelFamily 2.1.1
    com.apple.iokit.IOSCSIArchitectureModelFamily  2.6.8
    com.apple.iokit.IOAHCIFamily     2.0.6
    com.apple.iokit.IOATAFamily      2.5.1
    com.apple.iokit.IOUSBFamily      4.2.4
    com.apple.driver.AppleEFIRuntime      1.4.0
    com.apple.iokit.IOHIDFamily        1.6.6
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch         1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages      289.1
    com.apple.iokit.IOStorageFamily          1.6.3
    com.apple.driver.AppleACPIPlatform  1.3.6
    com.apple.iokit.IOPCIFamily        2.6.5
    com.apple.iokit.IOACPIFamily     1.3.0
    Model: MacPro1,1, BootROM MP11.005C.B08, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 4 GB, SMC 1.7f10
    Graphics: NVIDIA GeForce 7300 GT, NVIDIA GeForce 7300 GT, PCIe, 32768 MB
    Memory Module: global_name
    Network Service: Ethernet 1, Ethernet, en0
    PCI Card: NVIDIA GeForce 7300 GT, sppci_displaycontroller, Slot-1
    PCI Card: ATTO Celerity FC-42ES, sppci_fibrechannel, Slot-2@15,4,0
    PCI Card: ATTO Celerity FC-42ES, sppci_fibrechannel, Slot-2@15,4,1
    Serial ATA Device: WDC WD2500JS-41MVB1, 232.89 GB
    Parallel ATA Device: PIONEER DVD-RW  DVR-111D
    Fibre Channel Device: SCSI Target Device @ 0
    Fibre Channel Device: SCSI Target Device @ 1
    Fibre Channel Device: SCSI Target Device @ 2
    USB Device: Hub, 0x05ac  (Apple Inc.), 0x9130, 0xfd500000 / 3
    USB Device: Apple Cinema Display, 0x05ac  (Apple Inc.), 0x9222, 0xfd520000 / 4
    USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1006, 0xfd100000 / 2
    USB Device: Apple Optical USB Mouse, 0x05ac  (Apple Inc.), 0x0304, 0xfd130000 / 6
    USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x0220, 0xfd120000 / 5
    FireWire Device: built-in_hub, Up to 800 Mb/sec
    FireWire Device: unknown_device, Unknown

    Any news from ATTO? newer driver?
    did it just start but began after "xyz"?
    Have you run Apple Hardware Test?
    Take out the ATTO card and / or boot in Safe Mode and things are fine?
    And while the Nvidia 7300GT hasn't yet failed, might want to look into a replacement for it, too.
    OS X Snow Leopard Server Community:
    https://discussions.apple.com/community/servers_enterprise_software/mac_os_x_ser ver_v10.6_snow_leopard

  • IChat Server - Moving from one Mac OSX 10.5 server to another

    Hi
    I have found and read several posts about migrating Mac OSX 10.4 iChat to Mac OSX 10.5, but that's not quite what I want to do. I have deployed a new Xserve on our network and have moved/migrated all services from my old Mac OSX 10.5 server to the new unit now, with the exception of iChat.
    Does anyone know how I can move all of my existing users/settings across from one server to another? I don't really want to have to recreate all the set-up on the new server and it would be much easier if there was a way of moving the iChat Server from one server to another. iChat seems to install itself in lots of places on 10.5 server and I suppose I'm looking for somebody who can tell me which files/folders need to be moved over to the new unit in order for it to work.
    Thanks in advance.
    Paul

    Paul,
    stop the ichat server on both machines using:
    sudo launchctl unload /System/Library/LaunchDaemons/org.jabber.jabberd.plist
    make a backup of /etc/jabberd, /var/jabberd on the target machine
    copy the contents of the directories /etc/jabberd and /var/jabberd from the source machine to the destination machine, ensuring that owners and file permissions are maintained.
    restart the ichat server on the target machine thus:
    sudo launchctl load /System/Library/LaunchDaemons/org.jabber.jabberd.plist
    and it should work. I say should 'cos I have never actually had a reason to do this, but there is no reason I can see that this will not work.
    Note that this assumes that the user community (names) on the target machine are the same as the source, certificates if you use them are in the same place and, I guess it should go without saying, but the name of the ichat server and DNS names are the same. Note that DNS must be correct and pointing to the target machine.

  • Hosting website on Your own Mac or Mac OSX Snow Leopard Server?

    I have been looking at ways of hosting my websites on my own Mac - how could I do this other than purchasing a copy of Mac OSX Snow Leopard Server?
    I know you can turn on file sharing, but how can you display your sites?
    Can you host more than one site with domain names and does this mean that you would be able to ditch web hosting with a company if the sites were hosted on Mac or Mac OSX Server?
    Thanks for any help that anyone can give me with this.

    Ethmoid wrote:
    I know you can turn on file sharing, but how can you display your sites?
    The key appears to be turning on Web Sharing within Sys Pref's Sharing pane. Also, THIS Apple page says: +"Every Mac user has a Sites folder in the home directory automatically configured for local hosting within Apache."+ And the following Apple doc says: +"You can also share a website on your computer by placing files in /Library/WebServer/Documents on your hard disk."+:
    _Mac OS X 10.6 Help — Sharing a website on your computer_
    The second of these two articles is old, but still may be useful:
    _How to Turn Your Mac Into a Web Server_
    _Apache Web-Serving with Mac OS X: Part 1_
    And this article asks the qstn:
    _Should I host my own web server?_
    ...More articles related to hosting a website on your Mac may be found HERE.

  • Migrate from Exchange Server 2011 to Mac OSX Lion Mail Server

    Hi all,
    I'm looking to migrate from Exchange Server 2011 to Mac OSX Lion Mail Server.  I work for a company with roughly 30 employees and they use exchange for mail, contacts and calendars.  We want to take full advantage of OSX Server and to completly get off of exchange.
    What are the best ways to do this?  Are there any tools available to help this process?

    I agree with the points made by Strontium90. If you have any PCs then Apple's mail/contacts/calendar software is a poor choice. Kerio Connect as a mail/contacts/calendar server would not only support Macs but would also do a good job supporting PCs running Outlook.
    If you are going to become a pure Apple site, then you could use just the Apple software and this would be cheaper than using Kerio. For 30 users this might be a suitable solution, however even in a pure Apple environment many people prefer Kerio. For example I find Kerio much more pleasent when dealing with email addresses across multiple domains, email aliases, email group addresses, and so on. Kerio also has built-in email archiving, that is keeping a record of all emails. Kerio also provides a web-browser client for accessing email, calendar and contacts. It is worth noting that as standard Mountain Lion Server no longer includes a webmail feature. While I personally find the Kerio webclient rather ugly it does work.
    There are some annoyances I have with Kerio, firstly they have always charged a 'maintenance' fee for their software. This provided access to software updates, and in the past also provided access to Kerio technical support. Unfortunately they now only let you make two (2) support cases per year for that cost, and you now have to pay extra for any more cases. Also while they added support for EWS (Exchange Web Service) to allow using Outlook 2011 for Mac as a supported email client, they did a poor job of this so that it does not work properly with any other EWS compatible client. This means it will not work in EWS mode with Apple Mail, nor with Outlook for Windows. While there are other ways to connect these other clients, this seems a foolish move and there have been plenty of requests to fix this.
    Apple's Mail client uses EWS to connect to a 'real' MS Exhange server.

  • G4 Mac OSX 10.4 server with RAID & sharepoints - Intel Xserve & RAID?

    Hey all,
    so we need to migrate our G4 Power Mac running Mac OSX 10.4 server with about 60 user accounts and a RAID with about 50 sharepoints to a brand new Intel Xserve with 10.4 server and a brand new RAID.
    My plan for the server part of things is to put the new server online with the old one still running, make the new one a replica of the old one, then take the old one offline and promote the new one to a master.
    But what to do about the sharepoints and several terabytes of data? Is there any way to do this except manually copying the data and re-creating all the sharepoints? That wouldn't be the complete end of the world as long as all the accounts/groups come across via the replication, but it'd be nice if there's a smart way to do this.
    Thanks for your help!

    Never tried the replica promote so I can't say that it will work. The way I migrated from 10.4 to new hardware 10.4 server was to set the new server up with exactly the same setup, DNS, IP and so on. This requires the old server be off the network for a bit. Once it was running I would have a backup of the LDAP/OD info made directly from the old server in Server Admin. Import this on the new server and all users and passwords are back in place. Now as for the share points and the data the best thing to do is to attach the old RAID to the new unit first. Hopefully you have a way to have both RAIDs connected at the same time to the new unit since that would be best.
    In the interest of downtime you could immediately add the share points back in to WGM pointing to the old RAID drives. This gives you the free time to migrated the data when you want to. Make sure you know the right settings for each protocols which you use for each share point (AFP, SMB, FTP, NFS).
    Now that your up and running you can move data by whatever means you see fit to the new RAID keeping in mind you want to keep permissions in-tacked. There are many clone or sync option out there and you don't need to move all the share points at once.
    The main reason I chose this method is it offers a fall back and no client reconfiguring. If something is not working on the new server you can simply plug the old RAID back to the old server and your up. Second is that if you try to run both server at the same time you would need to create a whole new identity for the new server (IP, DNS and so on). Migrate data via a Network (very slow) and reconfigure all clients to point at the new server. I've done this at least 10+ times at different locations and even before the easy 10.4 backup of LDAP/OD info. Making sure you had a clean LDAP was never so easy. All swap outs took less then an hour of down time with maybe 2 hour pre-swap setup. Data movement to a new RAID was not always the case but by using this method you can move data later which is the most time consuming process of the whole swap.

  • List all users/groups in Contacts App with Mac OSX 10.9 Server

    I have installed Mac OSX 10.9 Server locally, and I am trying to set it up so that when a user opens Contacts, and goes to Directory Service it will list all of the users and groups (that have a mailing list) on the server. However, it will only show the users if they are searched for. Otherwise, it is blank.

    As the error says - you need to fix the permissions on your preferences folder, and it sounds like you may be missing part of the Application Support folders or have a permissions problem there as well.
    It sounds like something weird happened to your system that messed up permissions -- we see that happen often when people try to use Apple's migrate utilities between systems or disks (it doesn't copy everything, and messes up permissions).  Fixing permissions with Disk Utility can help, but you may need to reinstall Photoshop to replace missing files/folders, and you'll still have to fix the permissions on your preferences folder.

  • Mac OSX 10.4 Server on a MacMini + Mac Mini Network render farm

    Hi Guys,
    I am working at a small vfx post house in Bangkok. We are looking to install some sort of server and network renderfarm.
    There was talk of going Windoze based when I first arrived, so I am doing my best to steer them to Mac & OSX. (Most of the current workstations are MacPros)
    For a budget solution I said it may be possible to run a OSX Server on a new Mac Mini, and also create a 5-10 machine Mac Mini renderfarm (for rendering 3d scenes from Maya, encoding with Compressor, and 2d scripts from Shake).
    So my questions are:
    1. WIll OSX Server work on a mac Mini?
    2. Will the Mac Mini be able to handle it? It won't be a render box itself, more a machine to keep control of permissions on our central storage (stop people moving and deleting files and saving things in the incorrect place), and control the QMaster Adminstration.
    3. Has anyone had any experience creating a renderfarm from a stack on Mac Minis?
    4. If no one has any idea can they recommend a person/forum to ask?
    Thankyou very much!
    Adam Teale

    I found answer to my first question - does OSX server work on a Mac Mini - yes
    http://www.macgeekery.com/tips/customization/macmini_and_os_xserver

  • Files disappearing Mac OSX 10.8 Server

    Files are randomly disappearing in volumes on our Mac mini running OSX 10.8.2 Server

    I'm not 100 percent sure that users didn't delete these files, but it would have been an unlikely cooindidence. The files that disappeared were on different partitions of our server hard drive that are not commonly accessed by all users. So for two people to accidentally delete these files within a short period of time seems unlikely to me. Is there a section in the server log that would show if these files were deleted by a user?

  • Mac OSX 10.6 Server setup advice

    hi all, I was wondering if someone could offer some advise for the setup of a server on a home network.
    Here is what I have and what I'm trying to achieve.
    Link up 5 macs on a home network,
    1 iMac 17" which will run mac server 10.6.8
    1 iMac 24"
    1 MacBook
    2 MacBook Pros 15"
    2 iPads
    1 iPad 2 .
    4/5 iPhones
    via an Virgin media 50meg SuperHub connected to a Apple Airport extreme,
    I idea I have is to use the older iMac as the server, providing basic file sharing, address book access and remote VPN .
    I've installed the server software on the iMac but get a little stuck on the DNS setup side of things.
    So far I researched my DNS to find I don't have a static ip and setup a basic service from DyDNS.
    I understand that I will have to open the required ports on the superhub to setup the remote access.
    I would be greatful is someone can offer some advice with a simlar setup or can point to basic setup guide.
    Thanks in advance
    Yaddle. 

    Hi John,
    thanks for your advice, I have actually been using the two links you provided,
    yet they both lack support for the home user, and all suggest that the users have a static ip address, but this is sadly not the case.
    has anyone used . http://www.dyndns.com/about/home_solutions.html
    Does anyone use this service at home for their server and which settings did they use ?
    This would at least let me think Im working along the right lines.
    Im getting stuck with the Primary DNS questions along the setup route from apple setup. : (
    thanks again
    Yaddle.

  • Problems with RDP/RDC from Mac OSX to Windows Server 2008 on External IP

    We have a customer that is using Mac and Microsoft's RDC for Mac to their servers.
    They've just upgraded from Windows Server 2003 to 2008 and can't connect through RDP to their TS server on external IP.
    Their servers is not in any domain and it work for them to connect to another Windows Server 2008 that is located in their office when they use internal IP.
    The problem is that when using RDC to the external IP they get bellow:
    "Remote Desktop cannot verify the identity of the computer you want to connect to. This problem can occur if:
    The remote computer is running a version of Windows that is earlier than Windows Vista.
    The remote computer is configured to support only the RDP security layer.
    Contact your network administrator or the owner of the remote computer for assistance."
    From here they can choose "Connect" as they did on the Server 2003 but now they get: "Remote Desktop Connection cannot verify the identity of the computer that you want to connect to.Try reconnecting to the Windows-based computer, or contact our administrator."
    and is only able to choose "Ok".
    I've changed the settings on the "configuration for host server for remote desktop sessions" under General from "RDP-Security Layer" to "Negotiate" and in this case I get a logon windows where i type in all my information click logon. Here I get another
    error message which says something like: (We get it in Swedish). "Connection to the windows-based computer broke since there was a problem associated with the licensificationprotocol... Try to connect again" Where I can choose "Cansel" or "reconect"
    but it just keeps poping up if i chose reconnect.
    I've tried all settings in the TS server and there is not much to change on the RDP client. We have installed the server certificate on the Mac client but it didn't help.
    We've also tried with CoRD and it works fine as RDP from a normal Windows based computer.
    The only solution I've found on google is to use CoRD instead but we got problems with that connection since it keep crasching on our computer.
    In my eyes the problem is on the security requirements that the RDC for Mac needs but I can't find any inforamtion on MS sites about it.
    Greatfull for all tips and trix!

    I too was having the problem same as everyone else. However, for me the problem all started when I replaced my SSL certificate that was used/selected in the Remote Desktop Session Host Configuration utility, connections, RDP-TCP Properties.  The security
    layer is negotiate and the certificate is the one selected on that screen.  It was not licensing related.
    The certificate had expired and I didn't believe I needed it.  But turns out I did, so I had to generate and validate a new one using GoDaddy (though they specifically were not part of the problem).  As my Terminal Servers (Remote desktop servers)
    do not have IIS installed, I was a bit stumped on how to create a new certificate request.   I finally found some instructions on how to create a certificate request using the MMC snap-in, advanced operations, create custom request. The template
    chosen was "legacy key", and without boring the rest of the details that part was the root cause of my problem.  The legacy key was not able to be processed correctly by the Mac RDC client. Neither the official 2.1.1 client or the 2.1.2 download.
    The Terminal Server system event log was showing the following two errors, 36874 and 36888.  The first one contained the best details and said: "An TLS 1.0 connection request was received from a remote client application, but none of the cipher suites
    supported by the client application are supported by the server. The SSL connection request has failed."  Upon searching the internet for that, I found this page which described the legacy key problem:
    http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/3a2d2eec-000d-432a-abd7-6b965268c671
    So, my solution most familiar to me was to use IIS and create the SSL certificate request, process that with my 3rd party CA, export the certificate with private key and then import that certificate into all of my terminal servers.  Then using the session
    host configuration tool, pick the new certificate and the problem was now solved.

  • Envy 110e won't print wireless with my mac osx 10.7.5 ok with usb,

    very dissapointed with my envy 110e wire less printer, just wont keep its wire less connection. Fine with usb connection, but keeps dropping wire less. Now on reinstalling it gets as far as loading, however it recognises device, lists all its details, (type ip address etc) but then error message comes up and says it cant find printer on network!!!!!!! its going to be returned  or even float tested with all the water about!!

    Let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How to connect to embedded POSTGRESQL on Mac OSX Lion Server

    Hi all,
    I've upgraded my Mac OSX 10.6 server to 10.7 server 2 days ago.
    My web sites databases are still under MySQL server cause it's still running after the upgrade.
    I manage to migrate the databases to PostgreSQL, so i've enabled the wiki from the server.app to launch the PostgreSQL server.
    I can see that it's now running through a ps -ef | grep sql and that it's listening on the unix domain socket 5432 with netstat -an | grep SQL in a terminal shell.
    The problem is that I'am unable to connect to it.
    I tried psql -U postgres, and installed the Navcat for postgreSQL Lite, but they failed to connec to the database server twith the same error :
    psql: could not connect to server : Permission Denied
    Is the server running locally and accepting connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"?
    It seems that there is a permission problem on the Unix Domain Socket /var/pgsql_socket/.s.PGSQL.5432.
    It has a 0770 permission on it, but i don't know if it's relly the problem.
    I've compared with MySQL server, which I am able to manage through Navcat for MySQL Lite without any problem, and the socket permission are 0777 on /var/mysql/mysql.sock.
    Does somebody able to connect to the embedded PostgreSQL server ?
    Or am I doing something wrong ?
    Thanks.

    Thanks for your replies.
    I was able to connect but not from navcat
    sudo -u _postgres psql template1 (or your database name)
    I am able to connect using this command too
    1. Need to add yourself or the account accessing the database to Postgres Users group (use admin tools)
    So I agree that I have to add my user to the _postgres user group, but how do you did ?
    Using the admin tools, I did not find this Postgres Users group ?
    I don't understand why server's administrators are not members of this group already ...
    2. Create a role on database login in as _posgres
    Ok, I will do.
    3. To login in navcat you need to check socket to /var/pgsql_socket
    OK, I've already set the socket in Navcat to /var/pgsql_socket
    4. I was unable to enable TCP connection yet
    I am unable to enable it too. I tried to modify the config files in /var/pgsql, without success.
    I have no firewall on my server too, it's protected by my router's firewall and NAT.
    Thanks again for your help.

  • Domain Controlling: Windows XP Machine to Mac OSX Server

    We have a Mac OSX 10.6 Server and it runs our DNS and we want it to serve as a PDC, We are trying to connect a windows computer to it. When setting the windows computer to the specified domain it prompts for the Username and Password which is correctly entered and accepted, however it loads an error afterwards saying "specified domain does not exist or could not be contacted".
    Any idea's? Would this be something to do with an SRV record?
    It is the correct username and password as it definately aithenticates - When we type an incorrect password it tells us that it is incorrect. Also, the network firewall is open.
    Any response appreciated,
    Thanks.

    Hi Guys,
    Here is more info on my SMB configuration, I still can't join a Windows XP machine to OS X Server 10.5.3 PDC. Hope this configuration helps in anyway.
    smb:realm = "GRIDIRON01.OT.GRIDIRONINTERNAL.COM"
    smb:logon drive = "H:"
    smb:logon path = "\\%N\profiles\%u"
    smb:workgroup = "pctopia"
    smb:wins support = yes
    smb:map to guest = "Never"
    smb:enable print services = "yes"
    smb:wins server = emptyarray
    smb:security = "USER"
    smb:server string = "gridiron01"
    smb:ntlm auth = "yes"
    smb:netbios name = "gridiron01"
    smb:max smbd processes = 0
    smb:os level = 65
    smb:preferred master = yes
    smb:add user script = "/usr/bin/opendirectorypdbconfig -c createuseraccount -r %u -n /LDAPv3/127.0.0.1"
    smb:lanman auth = "yes"
    smb:domain logons = yes
    smb:domain master = yes
    smb:use spnego = yes
    smb:use kerberos keytab = yes
    smb:adminCommands:homes = yes
    smb:adminCommands:serverRole = "primarydomaincontroller"
    smb:adminCommands:ldapRole = "1.1 - hosting a master LDAP directory server\n"
    smb:auth methods = "odsam"
    smb:dos charset = "CP437"
    smb:enable disk services = "yes"
    smb:log level = 1
    smb:add machine script = "/usr/bin/opendirectorypdbconfig -c createcomputeraccount -r %u -n /LDAPv3/127.0.0.1"

  • I am running Mac OSx Lion 10.7.2. My problem is I can't search on an external network server for a file with the finder toolbar anymore. Nothing shows up and it will not search. I was able to in snow-leopard and am no longer able to w. Lion. Suggestions?

    I am running Mac OSx Lion 10.7.2.
    My issue is that I am not able to run a search in the finder toolabar on a network server. No files show up nor does it search on the server anymore. I was able to run the search in snow-leopard and am no longer able to do so with Lion. Is there a preference I can change or some kind of app or program I can download that will help me with this issue? This is extremely problematic for me as I am searching for files all day everyday. Thank you!

    Hello,
    It isn't the fw in Network you want o use or look at, that's for something completely different.
    My first suspect is the Power Adapter on the LaCie has gone.
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
    Reset the Firewire bus
    If your Firewire or USB isn't recognizing any device.  A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
    1. Shut the machine down.
    2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
    3. leave it for 10 minutes.
    4. Connect back up and reboot.
    http://www.macmaps.com/firewirebug2.html

Maybe you are looking for