Mac OSX 10.6.4 - LR3 in 64 bits

LR3 is running in 64 bits.
But Snow Leopard is not by default. AFAIK it's possible to boot the in 64 bits by holding 6 and 4 @ the startup.
Never tried...
The question is it going to make any difference for LR ?
Is LR going to be faster ?

chrisbLR wrote:
LR3 is running in 64 bits.
But Snow Leopard is not by default. AFAIK it's possible to boot the in 64 bits by holding 6 and 4 @ the startup.
Never tried...
The question is it going to make any difference for LR ?
Is LR going to be faster ?
Hi,
A couple of things.  There has been an issue documented here where LR 3 in 64 bit mode is not releasing memory the way it does in 32 bit mode.  You may want to open up the actvity monitor on your Mac and see if it is happening that way on your system.  In 32 bit mode, when idle, LR3 will reduce its footprint.  With 64 bit, it retains its highest allocation.
Some folks have reported slowdowns or sluggishness with LR3 on 10.6.4.  I (and others) have gone back to 10.6.3.  I've heard about the 6 4 keystroke, but haven't tried either.
Jay S.

Similar Messages

  • My Mac OSX 10.4.3 is a bit sluggish now...

    My Mac OSX 10.4.3 is running a bit sluggish now that I have had it for a few months. I am wondering what diagnostics/tweaking programs I can run through my Mac OSX System disc that will may help improve performance.
    I am not sure what specifically is going on. I just notice that sometimes it takes awhile switching between programs and running other software. A few months ago it was 100% better.

    As a voice of actual experience,
    80GB internal with about ~409MB free
    200GB external with about ~278MB free
    OS X 10.4.3
    No slow downs, no crashes, no issues (slow, sluggish, spinning beach balls, etc.)
    Best clients I have found for best use of system resources (native/compiled OS X apps) are:
    Transmission http://transmission.m0k.org/
    and second best is
    Bits On Wheels http://www.bitsonwheels.com/
    Now as far as your slow downs, look towards any software or hardware (and hence software drivers) that you may have installed recently that coincide with the slow down symptoms appearing.
    If it's just the 10.4 os (has a habit of it on some machines) deciding to give you issues, using AppleJack (booting into Single User mode after installing and using the command applejack AUTO restart [note the capitals] is sufficient enough to arm wrestle Tiger into behaving again). If however, it is being caused by an errant installed application or hardware driver you will notice the symptoms will reappear in which case you need to take the time to inventory what you have installed and remove them temporarily one at a time and test if the symptoms disappear.
    AppleJack http://applejack.sourceforge.net/
    There are other utilities you can try running while you are booted normally into OS X but they will perform the same tasks and not be able to do as much as when OS X is running a lot of files and caches are locked away from being able to be touched by the system hence they are less effective.
    Give it a go, if you have any questions, feel free to ask.
    Mac Mini 1.25   Mac OS X (10.4.3)   NO Norton Software + NO Antivirus Software = NO Problems on your Mac

  • CC Apps showing not installed on Mac OSX 10.8.4

    Can't seem to find a solution for this – when viewing the CreativeCloud menu under Apps, it says 'You have not installed any applications yet" They were showing up a couple of weeks ago, but now shows not installed. I've installed the new AAM and restarted the Creative Cloud, no change. What I did notice is that some apps updated using AAM instead of the CC. I would rather not download the entire suite again to make this work – any help here?

    @mishmedia, the above solution is meant for Mac OSX.
    Widows 7 and 8 (64 bit):
    Rename OOBE to OOBE_old (it's in C:\Program Files (x86)\Common Files\Adobe.)
    Relaunch the browser.
    Go to https://creative.adobe.com/products/creative-cloud.
    Sign in with your Adobe ID and password and download the CC Desktop App.
    Windows 7 and 8 (32 bit):
    Rename OOBE to OOBE_old (it's in C:\Program Files\Common Files\Adobe).
    Relaunch the browser.
    Go to https://creative.adobe.com/products/creative-cloud
    Sign in with your Adobe ID and password and download the CC Desktop App.

  • Web module crashes during export OR upload (Mac OSX 10.5x)

    Been happening more and more for some reason. The number seems to not matter, though typically there are 700 to 1400 images to either export or upload - and both crash LR. I'm on a Mac (OSX 1.5x) running LR 3.2. Actually, we're running TWO macs, and I can't upload from either one without at least one crash. Plenty of memory, large drives, files are from a Canon 5DII (dng). I'm starting to wonder if my Wacom drivers are to blame? Or if there's a bad file mixed in?

    PixelMaster78 wrote:
    Anybody have the beta for LR3 before purchasing the final version?  I've had all kinds of issues caused by Adobe's beta programs, both the public ones and private betas for PS CS5 and PSE.  Wondering if that might be contributing, but really i can't figure it out and its so frustrating.
    Given that you've had problems with other apps I think you would be best looking at the operating system for the source of your problem. First place to look would be the Console Logs to see what info is contained in the crash logs.

  • I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

    I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

    Hi Shane,
    Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
    I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
    Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
    Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
    Best Rgds.

  • Why can't I open a GarageBand recording on my iPhone in GarageBand on Mac OSX?

    I recorded an acoustic performance of my vocal quart last night on an iPhone running GarageBand 2.0.1 on iOS 7.1.2.  But I can't open it in GarageBand 11 (6.0.5) on Mac OSX 10.9.5.  What gives?
    Not only will it not open (and the software on my Mac platform is way more recent than on my iPhone, so you'd think it would be upward compatible), but when I try to open this iOS-created file on the Mac, it asks me where I want to save it ... it's already saved, I'm just trying to open it.
    I've looked at the reviews for the latest GarageBand, which it tells me I need to upgrade to, and they are terrible!  Many report that they wish they hadn't upgraded and that they could get back to an older version of GarageBand on their Mac.
    Does this mean I'm stuck and the two GarageBand platforms are not compatible and that I won't be able to open this file?  ... other thanes an mp3 in iTunes ...
    Thanks for any insights you can give me.

    BigMacUser wrote:
    I recorded an acoustic performance of my vocal quart last night on an iPhone running GarageBand 2.0.1 on iOS 7.1.2.  But I can't open it in GarageBand 11 (6.0.5) on Mac OSX 10.9.5. 
    [...] when I try to open this iOS-created file on the Mac, it asks me where I want to save it
    it sounds like it's opening fine, but you're just not letting it finish.
    it's asking you to save a version of the song for the mac; if it saved over the original file, it could no longer be opened on the iOS device, if you needed to alter something later

  • Firefox no longer working with Mac OSX 10.4.11

    i'm using Mac OSX 10.4.11 and Firefox 3.6.12. As i understand it any of ur upgrades no longer work with this computer system. ( I tried to upgrade last week and ur site said upgrades no available gfor my platform version. Last week every time i conducted a search (default Google) i was redirected to http://search.creativecommons.org/?q=crossword+puzzles&sourceid=Mozilla-search.what gives? Have I been hijacked? also sites that I use daily are clipped and entire pages are smaller than usual . see www.shockwave.com
    If u are no longer supporting Mac users, please let us know in advance or at least post it on ur site. Can no longer use Firefox...

    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Cmd+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    Firefox > Preferences > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
    Tools > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?
    If you open about:crashes, you should get links to online crash reports. You could post some of the crash IDs for review by volunteers here.
    Given the timing, another issue might be some ads or media in the page. There are some add-ons to block such things...

  • I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

    I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
    I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
    I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
    After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
    “Welcome to Aperture 3.2
    Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
    Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
    Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
    Current Library Location:
    Jadzia (home)   -----Pictures------Aperture Library
                                                      QUIT             UPGRADE”
    I have heard horror stories  about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
    So here is my dilemma.  I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
    Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

    Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop.  Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
    You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file.  For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto. 
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

  • Canon  Vixia HV30 capture issue on CS6 (Mac OSX)

    This might be (hopefully) something in setup, but under Mac OSX Lion (10.7.4) / Premiere CS6, i am unable to capture video from my Canon Vixia HV30 - it's either i get a monstruous noise or simply get a 'capture device offline' message.
    No one ever had a similar problem even withanother cam here? I posted weeks ago but never got any reply.
    Am using the same cam under Windows with Premiere CS4 and never faced such an issue.
    Matter of some sort of CODEC ?  Does not seem to require any specific driver for Mac based on Canon website.
    Any suggestion?
    Thanks,
    Rob

    Solved... (Almost!)
    Someone pointed out that Canon has a software (they said there was no driver for Mac OS X so I had stopped looking...) But if it may help others, there is a ''CameraWindow'' for Mac OS X 10.6, 10.7 and 10.8  available. 
    As soon as I installed it, I could capture both from Adobe Premiere CS6 and iMovie.
    One problem remaining though : the noise (feedback-like) that gets out from... the system's sound card ! (when capture is ongoing). I have to shut down the volume completely.  Never had this issue under Windows, need to figure out why this happens now.
    Jeff thanks again for your assistance, even though the solution was somewhere else.
    If anyone has a clue for the noise issue ... please let me know
    Rob

  • Mac OSX Mountain Lion crashes randomly.

    I've made a clean install of Mac OSX Mountain Lion in my 15" Macbook Pro late 2009 laptop. I kept reciving these intermittent lock ups and then the Macbook pro reboots (while thankfully saving whatever it needed to save before it reboots) by itself with a message saying that the macbook pro had a problem and had to restart automatically. Did any of you have the same problem? and if so do you have a solution to fix it?

    I am having the same issue with my late 2010 model macbook pro 15 inch. When the computer restarts, the Problem Report for OS X screen comes up with the following in the Details section (third time this has happened in the last 3 hours or so, any help would be great:
    Interval Since Last Panic Report:  41834 sec
    Panics Since Last Report:          3
    Anonymous UUID:                    383CDF66-BAA3-435A-9D01-B4EDB6118596
    Thu Jul 26 22:11:52 2012
    panic(cpu 2 caller 0xffffff7f85161c85): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff8118b4d000 0x0a5480a2, D0, P3/4
    Backtrace (CPU 2), Frame : Return Address
    0xffffff80f59a2f70 : 0xffffff8004a1d5f6
    0xffffff80f59a2fe0 : 0xffffff7f85161c85
    0xffffff80f59a3070 : 0xffffff7f8525b5b7
    0xffffff80f59a30d0 : 0xffffff7f8525b62b
    0xffffff80f59a3140 : 0xffffff7f85570883
    0xffffff80f59a3280 : 0xffffff7f8528175d
    0xffffff80f59a32b0 : 0xffffff7f8516b9e6
    0xffffff80f59a3360 : 0xffffff7f851670b8
    0xffffff80f59a3550 : 0xffffff7f851682e4
    0xffffff80f59a3620 : 0xffffff7f86251494
    0xffffff80f59a36e0 : 0xffffff7f86281f8b
    0xffffff80f59a3770 : 0xffffff7f86267638
    0xffffff80f59a37d0 : 0xffffff7f86267efc
    0xffffff80f59a3820 : 0xffffff7f862682e6
    0xffffff80f59a38c0 : 0xffffff7f86268d06
    0xffffff80f59a3900 : 0xffffff7f86223f31
    0xffffff80f59a3a80 : 0xffffff7f862652ee
    0xffffff80f59a3b40 : 0xffffff7f86222a3a
    0xffffff80f59a3ba0 : 0xffffff8004e64929
    0xffffff80f59a3bc0 : 0xffffff8004e65ed0
    0xffffff80f59a3c20 : 0xffffff8004e638ef
    0xffffff80f59a3d70 : 0xffffff8004a981a1
    0xffffff80f59a3e80 : 0xffffff8004a20abd
    0xffffff80f59a3eb0 : 0xffffff8004a10448
    0xffffff80f59a3f00 : 0xffffff8004a195fb
    0xffffff80f59a3f70 : 0xffffff8004aa5ad6
    0xffffff80f59a3fb0 : 0xffffff8004aced13
          Kernel Extensions in backtrace:
             com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f850fa 000->0xffffff7f853fcfff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f8506f000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[E37F420A-B5CD-38ED-9441-5247583B6ACE]@0xff ffff7f850e6000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[5D671681-D21B-3CCA-9810-B15E648C1B27]@0 xffffff7f850a3000
             com.apple.nvidia.nv50hal(8.0)[9CD95A4A-FD94-349E-A4B6-FC3B74E197F5]@0xffffff7f8 540a000->0xffffff7f8572cfff
                dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f850 fa000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f8506f000
             com.apple.GeForce(8.0)[91C40470-82BA-329A-A9D7-4C70F28275FD]@0xffffff7f86216000 ->0xffffff7f862d8fff
                dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f850 fa000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[E37F420A-B5CD-38ED-9441-5247583B6ACE]@0xff ffff7f850e6000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f8506f000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[5D671681-D21B-3CCA-9810-B15E648C1B27]@0 xffffff7f850a3000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    12A269
    Kernel version:
    Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
    Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
    Kernel slide:     0x0000000004800000
    Kernel text base: 0xffffff8004a00000
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 4410256819990
    last loaded kext at 61111055965: com.apple.filesystems.smbfs          1.8 (addr 0xffffff7f86d9a000, size 229376)
    last unloaded kext at 168006988398: com.apple.driver.AppleUSBUHCI          5.1.5 (addr 0xffffff7f85a7e000, size 65536)
    loaded kexts:
    com.logmein.driver.LogMeInSoundDriver          1.0.0
    com.apple.filesystems.smbfs          1.8
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.ntfs          3.10
    com.apple.driver.AGPM          100.12.69
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleHDA          2.3.0f2
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleMikeyDriver          2.3.0f2
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f8
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.GeForce          8.0.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
    com.apple.driver.AppleIntelHDGraphics          8.0.0
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleSMCLMU          2.0.2d0
    com.apple.driver.AppleMuxControl          3.2.6
    com.apple.driver.AppleIntelHDGraphicsFB          8.0.0
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.ApplePolicyControl          3.2.6
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.driver.AppleUSBTCButtons          235.4
    com.apple.driver.AppleUSBCardReader          3.1.0
    com.apple.driver.AppleIRController          320.15
    com.apple.driver.AppleUSBTCKeyboard          235.4
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.iokit.SCSITaskUserClient          3.5.1
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.2.0
    com.apple.driver.AppleUSBHub          5.1.6
    com.apple.driver.AirPort.Brcm4331          600.15.20
    com.apple.driver.AppleFWOHCI          4.9.5
    com.apple.driver.AppleAHCIPort          2.4.0
    com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
    com.apple.driver.AppleUSBEHCI          5.1.5
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleACPIButtons          1.6
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.6
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.3.0f2
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f8
    com.apple.iokit.IOAudioFamily          1.8.9fc9
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.iokit.IOSurface          86.0.2
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.iokit.IOBluetoothFamily          4.0.9f8
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.3.0f2
    com.apple.iokit.IOHDAFamily          2.3.0f2
    com.apple.nvidia.nv50hal          8.0.0
    com.apple.NVDAResman          8.0.0
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleGraphicsControl          3.2.6
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.2.0d16
    com.apple.driver.AppleSMC          3.1.3d11
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
    com.apple.iokit.IOUSBMassStorageClass          3.5.0
    com.apple.driver.AppleUSBMultitouch          235.7
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.5
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
    com.apple.iokit.IO80211Family          500.15
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOAHCIFamily          2.2.0
    com.apple.iokit.IOEthernetAVBController          1.0.2b1
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOUSBFamily          5.1.6
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.8.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          344
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.6
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435435313236344243313036372E4D313646
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435435313236344243313036372E4D313646
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.81.20)
    Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: MATSHITADVD-R   UJ-898, 8.47 GB
    Serial ATA Device: ST9500420ASG, 500.11 GB
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 5
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

  • Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

    Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
    My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
    Please help!!!
    Thanks,
    Paolo

    Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
    Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
    Personally I think of all the issues possible its DVDSP vs QT.
    Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

  • HT1893 After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer.  The printer is working. What do I have to do to be able to scan again?

    After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer.  The printer is working. What do I have to do to be able to scan again?

    Often, you have to download updated vendor software drivers when you switch operating systems. HP doesn't list a C5500 on their web site, however, here's the link to the OS X 10.6 C5540 software.  If you have one of the other C55xx models, look for the updated driver/scan software on their software/driver download section of HP.Com.

  • Mac OSX 10.9 and HP Officejet Pro 8100 Compatibility

    Can we please get a driver for the HP Officejet Pro 8100 that is compatible with the Mac OSX 10.9? I bought the printer so that my roommate and I could share it to print wirelessly, but I am unable to do that without a compatible driver. Please develop one as soon as possible!
    Thanks!

    Hi,
    The Drivers are available via Apple Software Update,
    In order to configure it wirelessly you may use the HP Easy Wireless Install app.
    You may find a step by step guide in the following document:
    h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=4337543&spf_p.tpst...
    The app iself can be downloaded from the Mac App Store:
    https://itunes.apple.com/us/app/hp-easy-wireless-setup/id876495880?mt=12
    If you experience any issues while trying to locate the pritner during the wireless configuration. restoring the network defaults for the printer can be done by pressing and holding both the Cancel ( ), the Wireless ( ), and the Power ( ) buttons for three seconds.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.

    Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.

    Hi,
    Is there an iPhone involved ?
    If not, what happens  if you remove the Apple ID on the iPad and then set it in Airplane Mode (allow a couple of minutes at this point) followed by re-adding the Apple ID ?
    What, if any error messages are appearing on the Mac when you try to launch the App or Login to the iMessages server ?
    Is the Apple ID linked to an iCloud account ?
    In Messages 7 (Mountain Lion) this did not seem to be important but it seems it is in Mavericks/Messages 8
    9:14 pm      Friday; April 11, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Problem installing Mac OSX on my new MacBook hard drive...

    Hi,
    i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
    i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
    anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
    so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
    i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
    this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
    Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
    I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
    i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
    i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
    blue skies,
    ps. please feel free to email me at [email protected] if you think that would be better! :o)

    Hi,
    ...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
    ...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
    Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
    I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
    Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
    I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
    blue skies,

Maybe you are looking for

  • Vendor as a Plant in STO

    hello guys, I have a small query like can we use Vendor as a Supplying plant for STO as we have to use this on day today basis and client dont want to go for Consignment. is there any field in vendor master that can help me to use the Vendor master a

  • I am not able to see the Business area in Discoverer desktop

    Hi, r I am new to Discoverer I have created a business area in EUL with user name and password as dewip/dewip in Discoverer administrator and now when I am logging in to Discoverer Desktop with the same user name and password to create workbook I am

  • BPM Monitoring of IDOCs

    Hello all, I have a scenario with 100 IDOCs and I map the IDOCs in ccBPM. But if somehow a mapping process for one of the IDOCs in ccBPM goes wrong you get an error (a red flag) for all of the other 99 IDOCs. My question is then how can we monitor wh

  • Master Installation for ERP 6.0 SP3 does not has central instance

    Hi, I have a problem to start ERP 6.0 installation. I canu2019t find right version of Installation Master disk. I attempted to use following object: Installations and Upgrades -> SAP Application Components -> SAP ERP -> SAP ERP 6.0 -> SAP NETWEAVER 7

  • LabVIEW 8.0 attachment​s (new extensions​)

    LabVIEW 8.0 added quite a few new extension and maybe some of them should now be allowed as attachments. Examples are LabVIEW project (*.lvproj), X control (*.xctl), LabVIEW library (*.lvlib), etc. LabVIEW Champion . Do more with less code and in les