Mac osx 10.6.5 showing up as 10.6.4??
even after using the update combo 10.6.5 and running the package the mac still states its on 10.6.4,i ran software update after that and it showed that 10.6.5 was available so i ran the update via that and after downloading it restarted my system but still shows up as 10.6.4 in the about this mac tab..??any clues as to what is going on
ok finally figured it out thanks to everyone for all the inputs and heres my final answer...
if uve run the combo update for 10.6.5 and were using a 10.6.4 system,and after that u run a software update the 10.6.5 still pops up and even after downloading and installing that ur system shows up as 10.6.4...
then go to the main library for the mac..look for updates and find the 10.6.5 package there..
run it manually from there restart and voila ull have 10.6.5 on ur system!!
Similar Messages
-
Can't install Mac OSX Lion because it show as "Installed" in the Appstore
Hello,
Actually, I want to buy Max OSX Lion, but I can't do it because it is displayed as "installed" in the Appstore. My laptop has OSX version 10.6.8 installed. Does someone has the same problem as me ? Did you manage to fix it ?Hello, and welcome to Apple Support Communities!
Go to your Applications folder and look for Install Mac OS X Lion.
Otherwise, option-click the purchased tab and while still holidng option, click the button which should now be "Download." -
Download Photoshop Elements 8 to Mac OSX
When trying to download Photoshop Elements 8 for my Mac OSX the downloads available show it’s not available for Mac OSX.
Since the PE8 purchased was for Mac and worked OK on my other iMac - please advise how I can now get this on my MacBook which doesn’t have a CD drive.
Please advise. KenWoops - too hasty.
Have now found HD/Lib/App Support/Adobe (on MacBook) which contains the folders:
Adobe Anchor Service
" " 2.1
" " CS4
AMT20
Backup
caps
Flash Player install manager
Installers
Uninstall
Which of these do I trash, please? - before further attempt with FlashDrive. -
So here is a lowdown on my problem.
I start my mac OSX, I hold down the alt/option key and load my MAC osx drive (which is the only drive available; however, when i do not hold down the alt/option key it will go to a black screen that says "no bootable device, press a key when device inserted"). Continuing, it then goes to my login screen where I have my username, and I can enter my password like usual. I enter my password, hit the enter button (like I always do), and this is where my problem begins.
After I enter my login and hit enter, the screen goes grey, with a little apple symbol in the middle and a different shade of grey loading bar underneath. This grey loading bar shows up for about 10 seconds, fills up about 10-20 percent, and then shuts my computer down.
No matter what I do, this process repeats over and over, and heres where the problem gets worse, and this part is VERY IMPORTANT and is the most depressing, stressful part of the process.
NONE of the startup/boot commands work except holding the alt/option key. I can't hold: Command plus r; command pr to reset PRAM; shift to enter safe mode.
I really dont know what to do here :/. I have files that I want on the hard drive, that are pretty important but not critical. I gave up on wanting the files back but now I want to simply WIPE my computer and re-install a clean version of OSX onto the computer, but I CANNOT GET TO THE REINSTALLER :(.
More information that may be helpful:
I do have a partition on the HDD that I was going to use for Bootcamp, but it does not have anything installed on it (thus causing the "no bootable device" screen to load, and probably causing the boot commands not to work).
My version of Mac OSX is 10.8.4. "MBP 15.4/2.8/16GB/768 flash"
The last time I restarted my computer, my mac OSX RAM was down to 1.75 GB, with nothing open. Usually when nothing is open the free RAM is around 10-13 GB (I know this because I have the activity monitor always open, and I use my computer a lot).
Again, boot commands will not work, except for holding the alt/option key.
So if anyone can help me fix my problem(s), which are:
1: using boot commands; 2: reinstalling mac OSX; or 3: getting my files,
I would love you forever. I would really prefer 1 or 2. Thanks for reading this.Oh and one more thing, I do not have a disc drive in the mac osx. The version I have comes without one.
I am very puzzled about what to do right now. -
I am running Mac OSx Lion 10.7.2.
My issue is that I am not able to run a search in the finder toolabar on a network server. No files show up nor does it search on the server anymore. I was able to run the search in snow-leopard and am no longer able to do so with Lion. Is there a preference I can change or some kind of app or program I can download that will help me with this issue? This is extremely problematic for me as I am searching for files all day everyday. Thank you!Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html -
Mac OSX Lion v10.7.4 ipod touch isn't showing up in iTunes
I am using a Mac OSX Lion v10.7.4 and my ipod touch isn't showing up in my itunes. I've followed all of the articles' instruction and restated them both a million times and it still hasn't worked. What is there left to try?
have you tried using a different usb port on your computer some are not strong enough, does your cord still charger your phone? if not then maybe its the cord. have you uninstall itunes? ( it has six things to successful unistall it)
-
I tried to install Photoshop CS2 on Mac, OSX, 10.9.5.
By the end of the installation, it shows, error, but no error number for reference,
The only choice is "quit".
Please helpThat is correct Das_Sad. CS2 will not run on Intel based processors under Mac OS. You will need to find a Mac computer with a PowerPC processor if you wish to run Creative Suite 2.
-
CC Apps showing not installed on Mac OSX 10.8.4
Can't seem to find a solution for this – when viewing the CreativeCloud menu under Apps, it says 'You have not installed any applications yet" They were showing up a couple of weeks ago, but now shows not installed. I've installed the new AAM and restarted the Creative Cloud, no change. What I did notice is that some apps updated using AAM instead of the CC. I would rather not download the entire suite again to make this work – any help here?
@mishmedia, the above solution is meant for Mac OSX.
Widows 7 and 8 (64 bit):
Rename OOBE to OOBE_old (it's in C:\Program Files (x86)\Common Files\Adobe.)
Relaunch the browser.
Go to https://creative.adobe.com/products/creative-cloud.
Sign in with your Adobe ID and password and download the CC Desktop App.
Windows 7 and 8 (32 bit):
Rename OOBE to OOBE_old (it's in C:\Program Files\Common Files\Adobe).
Relaunch the browser.
Go to https://creative.adobe.com/products/creative-cloud
Sign in with your Adobe ID and password and download the CC Desktop App. -
What is correct update or upgrade for Mac OSX v 10.5.8? Also can't use sites without updates on firefox & safari. Auto update shows none available?
Click here.
(89934) -
I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
Problem installing Mac OSX on my new MacBook hard drive...
Hi,
i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
blue skies,
ps. please feel free to email me at [email protected] if you think that would be better! :o)Hi,
...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
blue skies, -
How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system. Not enough memory to upgrade.
You can't. iCloud is not for general file backup from a Mac. It's for backup up and syncing data between mobile devices and and Macs and The following is from this Apple document: iCloud: Backup and restore overview.
iCloud automatically backs up the most important data on your (mobile) device using iOS 5 or later. Once you have enabled Backup on your iPhone, iPad, or iPod touch .....
What is backed up
You get unlimited free storage for:
Purchased music, movies, TV shows, apps, and books
Notes: Backup of purchased music is not available in all countries. Backups of purchased movies and TV shows are U.S. only. Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or iBookstore.
Some previously purchased movies may not be available in iTunes in the Cloud. These movies will indicate that they are not available in iTunes in the Cloud on their product details page in the iTunes Store. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.
You get 5 GB of free iCloud storage for:
Photos and videos in the Camera Roll
Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
App data
Home screen and app organization
Messages (iMessage, SMS, and MMS)
Ringtones
Visual Voicemails
But not from a Mac. If you want to backup your photos and other important files I suggest you get an external hard drive and use it with Time Machine.
OT -
I updated to Firefox 4.0.1 on Mac OSX 10.6.4. When I go to the "Bookmarks" drop down menu, there is no "Organize Bookmarks" command. How do I do the operations that were under that command such as add new folders, move bookmarks, export bookmarks, etc.?
"Organize Bookmarks" has been renamed to "Show All Bookmarks" in the bookmarks menu.
-
MPEG2 codec not working in Final Cut Pro on Mac OSX Tiger
We have been using the File-export-Quicktime Conversion-MPEG2 codec for exporting of files from Final Cut Pro to DVD Studio Pro. On the new mac system that was just bought, the option does not show up.
Currently the system is running Quicktime Pro 7.1.2/ FCP 5 and DVD Studio Pro 4 and it is a new mac system running Mac OSX Tiger.
This problem has happened before on a mac running on an older system, but that was solved by reinstalling FCP and then DVD Studio pro and making sure that the QT Pro was of the latest version.
Right now, we have reinstalled everything the same way, tried installing DVD Studio Pro after, we have also done a full software update of the software over the net.
The codec is still not working, all the macs in the office are supposed to be upgraded to Mac osx tiger, but right now we can't do so, cos then we wouldn't be able to burn any DVDs.
Please help, thanks.The installation of QT 7 is the culprit behind the missing MPEG-2 Export Component. But during upgrades, it doesn't always get rid of the file ... probably what happened on your older system when you upgraded to QT 7 or Tiger. Either the new system came with QT 7 preinstalled, therefore not including the Export Component, or if it was upgraded, the upgrade missed it.
-DH -
Applet in Apple Mac OSX problem
Hi all,
have developing an applet long while using WinXP platform, everthing seem ok, but when i try over Apple Mac OSX, i has a loading problem saying that init failed to load ArrayList as error message said:
ArrayIndexOutOfBound, 0...
but when i debug print out the ArrayList content and its length, i'm sure that this ArrayList is NOT NULL and its length is NOT ZERO either. what is happening here? oh, ya, this only happen in Safari, in FireFox for Mac no problem, even Camino also pass the test, why? anyone have idea about this? because i'm new to Apple Mac.
also, there is another question whereby, when i use FireFox for Mac to load the applet, the applet load seem no problem but it just can't display properly. what i mean is that in Windows platform (IE6), this applet show entire applet successfully, but when i try it in Mac, it show only a part of applet without any error, but when i try to refresh the page, applet is now successfully show, why?
lastly, when a button of an applet being click and this will bring a new window with some parameters value, its work on IE in Windows platform, why it won't work for FireFox or Safari for Mac? i see prompt out saying is security problem, is there any workout of this? thanks. to summary out of junk above:
_______________________________FireFox_____Safari_____IE
_______________________________Win | Mac_____Mac____Win
1. load applet for 1st time___________OK_|_NO_____FAIL____OK
2. refresh applet after 1st load failed___OK_|_OK_____FAIL____OK
3. when applet button click (security)___OK_|_NO_____-_______OK
p/s: all above test was using same applet with same parameter and value.
below is the sample i capture from Apple Mac just now:
http://img.photobucket.com/albums/v660/ahbeng78/Apple_Mac.png
Message was edited by:
ahbeng78i has a loading problem saying that
init failed to load ArrayList as error message
said:
ArrayIndexOutOfBound, 0...Well, post the stack trace.
but when i debug print out the ArrayList content and
its length, i'm sure that this ArrayList is NOT NULL
and its length is NOT ZERO either. You can still get an out of bounds exception with those conditions. The list could exist, its length could be N, but you're trying to dereference position N + 5, for example.
try it in Mac, it show only a part of applet without
any error, but when i try to refresh the page, applet
is now successfully show, why?My guess is that you're not calling repaint() when you should, but that's just a guess.
lastly, when a button of an applet being click and
this will bring a new window with some parameters
value, its work on IE in Windows platform, why it
won't work for FireFox or Safari for Mac? i see
prompt out saying is security problem, is there any
workout of this? thanks. to summary out of junk
above:Often you can sign applets so they can do things that unsigned applets aren't allowed to do.
Maybe you're making some kind of security mistake that Firefox and Safari are (properly) catching but IE isn't. In any event, post the error message.
Maybe you are looking for
-
How to recover administrator password in windows 7 using usb
I have an HP netbook mini and need to how to recover administrator password in windows 7 using usb as we have forgotten and need to load itunes from another Iphone. This question was solved. View Solution.
-
Iphoto is trying to download pictures from my iphone 4s that is not connected. How do I fix this?
My imac began to download pictures from my iphone 4s, it was unplugged before the download of pictures was complete, now iphoto is trying to download without success and I can not get it to stop. How can I get iphoto to stop trying to download?
-
In reciever jdbc adapter config sending data to multiple tables
Hi Masters, Can u help me with examples step by step procedure of sending data to multiple tables in reciever jdbc adapter .. configuration.... thanks in advance, jp.
-
How to delete/add playlist in iTunes?
I have a new iPod Nano and have sync'd and registered it with iTunes on my Mac. However, there isn't any way to create or delete playlist under the iPod Nano icon in iTunes. Anyone have some suggestions on how to do this?
-
IF evaluation between two integers
Having a rough time finding this solution. Hopefully someone can help. Here's the deal: Let's say we're trying to track multiple uses of multiple objects' weights and the amount of time each weight was employed in a function. We also need to organize