Mac OSX/no iPod... tried to Restore, FROZE DURING RESTORE!!!

Ok... so anyone who has logged onto the discussion area has seen the messages about OS X not recognizing an ipod that's plugged into it. That's fine. I tried the Reset, Re-Install, Restore method, but both my new Mac Mini and my iPod froze when the iPod was about 25% restored! LAME!
Now, when I try to re-restore my iPod, it keeps freezing at the same point in the restore. I can usually force-quit the iPod Updater before my whole computer freezes, but the iPod still hasn't been restored. It's part-way restored so that when I reset the iPod, the apple logo shows, then a blank screen, then the apple logo, then a blank screen... I can't turn it off either... the buttons don't respond in the Apple loop of doom on my ipod.
Is it possible to take my iPod to a genious bar to get it restored??
Thanks for any insight,
Beth

If you haven't already, you can try running the iPod in disk mode when trying to restore it ( On a 3G or earlier iPod, reset it then hold the 'Previous' and 'Next' buttons until the display reads "Disk Mode". On a click-wheel iPod, hold 'Select' and 'Play/Pause'. ) If the restore still does not work after that then I would recommend you take your iPod to an Apple Store and have the genius guys take a look at it. It might end up being something simple, but it could also be something like HD failure. If your iPod is still under warranty, then the iPod could be repaired for free if the issue is covered under the warranty. If not the Apple Store will let you know of any costs before they actually perform any repairs.
hope that helps

Similar Messages

  • Computer froze during restore....

    Computer froze during restore now ipad is not recognized on itunes. Ipad screen says connected but not on itunes list. Tried the troubleshoot steps with firewall disabling/reinstalling itunes. Windows PC.

    Typically the next step would probably be to try recovery mode to restore the device again. This article explains how to to that.
    iPad: Unable to update or restore.
    From the article.....
    Summary
    You may encounter the following symptoms while updating or restoring your iPad:
    iPad continually restarts but never displays the Home screen.
    An update or restore did not complete and the iPad is no longer recognized in iTunes.

  • IPod Touch froze during restoration

    I recently was given a first generation iPod Touch.  About 2 days ago I paid for the iOS 3.1 download and started the process.  It seems that everything worked fine on the computer, but my iPod froze during the process on the iPod screen with the apple and loading bar.  Today, I tried to hook it back to iTunes to finish the process, and all it would do is sync with the screen still frozen.  I tried today to restore it, and it got stuck on the same screen as it's been frozen on with the loading bar a little further than before.
    Do you know what's wrong with it? What should I do?
    Thanks so much!

    I don't think this is an individual hardware problem as so many people have reported the same incident and plenty others probably don't know about the site. I am having this problem with itunes 8.1. While my ipod touch is recognized by it perfectly my 60gb ipod video is not recognized by it. I have tried all the recommended solutions in the support section and nothing helps. Apple needs to fix this problem ASAP.

  • Iphone froze during restore

    Hey, just got my Iphone 4 replaced today at the apple store, the home button was acting odd. Anyway, I plugged it in to restore from my backup, started the restore, and half way through it stopped and gave me an error message saying to restore the phone before updating it, so I hit the restore button. It stopped that with an error message too, and my phone disappeared from itunes. I unplugged it and plugged it back in, waiting for a couple minutes. It didn't show up so I unplugged it again, right as I did it finally showed up, but I had already disconnected it. The screen turned all white at first, then faded to all black. Now I have a black screen that is lit up, so it's on, but it won't respond to anything. Tried shutting off, plugging in, restoring, dfu mode... won't show up in itunes or respond to anything. Do I have to bring it back to the store and get another new one? I've literally had it for like 4 hours. Better off letting it die so it shuts off or charging it? Really frustrated right now, need my phone at work.

    Hi ShanaB, could you tell me what version firmware came on the iphone? I'm having trouble also but don't want to lose the unlock. ty

  • IPod Touch 4th Gen froze on restore after updating to 5.0 and iTunes doesn't recognise my iPod now??

    After updating to 5.0 my ipod is not recognised in iTunes and I lost everything on it. I have attempted several restores but it just freezes and now all I have is a usb plug on the screen and can't use it!! I have tried the holding button thing, uninstalling and reinstalling iTunes, using a different usb port and nothing works. I have even left it to restore over night and it hasn't moved. iTunes is enabled in my firewall and I am running an iTunes diagnostics atm. Help!

    My ipod tunred white screen, but im not using it when it happens

  • Help!! My IPod Froze During Restore

    I hope someone can help... I just got a used IPod mini yesterday. My kids have the IPod mini and an IPod shuffle so we've already got the software/ITunes installed on our computer.
    I plugged my IPod mini into the USB port and let it charge. My computer picked it up and showed the previous owner's name and info. The mini was fully charged. I then attempted to restore it to wipe out the previous owner's data. The restore process started and then I got the AC adapter icon on the mini's screen. Needless to say.. we didn't have one. I ran out and got one and plugged my mini in. That's as far as I got. It's stuck.
    I've reset it numerous times.
    I tried putting it in disk mode.
    I tried plugging it into a different USB port.
    I checked the AC adapter on my daughter's to make sure it was working...
    I can't get past the AC icon!
    Can't get the computer to recognize it.
    What do I do???

    it's ok now i fixed it

  • Froze during restore

    On my way home from work today, I plugged my iPod mini into the car adaptor as usual and played my music. I turned to the radio for traffic, and when I switched it back, my iPod wasn't working. I've managed to go into disk mode, but it froze when charging. I tried restore, but it seems to have frozen midway through that. The apple logo is there (back light won't work) and the bar for restore is halfway through. The instructions said that it would show again in iTunes when it was done restoring. Instead, it's not doing anything. Should I try again? Turn my computer off and go to bed or what?

    Hi ShanaB, could you tell me what version firmware came on the iphone? I'm having trouble also but don't want to lose the unlock. ty

  • ITunes is not recognizing my iPod Touch After iTunes froze during a sync!

    Okay... i was syncing my second gen iPod Touch (16gb) with iTunes and everything was going normally, until iTunes froze on my windows PC!!!
    Then, i had to use ctrlaltdel (task manager) to end task for iTunes. When i restarted iTunes to try and sync my iPod Touch, it asked me if i wanted to enable syncing. I clicked yes, and then it said sync services could not find information on this device.
    I had NEVER tried to jailbreak my iPod Touch, i just installed 3.0 yesterday, and sync was working perfectly. I didnt have any problems.
    Please help me. How do i fix this? i looked on apple.com and they said to reinstate the Apple Mobile Device Service, which i DID. i followed their instructions to the letter, but nothing has worked. Im really scared! i payed $300 for this iPod and while everything works, it wont let me sync to iTunes!!!

    OK, no need to panic. Most everything is fixable.
    First off, reset your touch. Hold the Sleep/Wake and Home buttons down together until you see the Apple logo. Let go and let it restart.
    Reboot your PC. When it is done, check to see if Apple Mobile Device Services are running. If they are, plug in your iPod. What happens?
    Does anything pop up like a camera notification, or your PC reports it can't recognize this device?
    If you get the camera notification, you will have to disable that before itunes will see your iPod. Search Support for an answer to that.
    If you are still having problems, completely remove all Apple software from your computer (iTunes, Apple Mobile Device Services, QuickTime) and download and re-install iTunes.

  • HT201412 Held Sleep & Home buttons on my iPod Touch (1st Gen.) during restoration process, now won't turn back on. What can I do myself to fix this? Thank!

    In short, I was accidentally restoring/resetting my 1st generaton iPod Touch and I wanted to quickly get out of that, so I rebooted as you all know is that I held the Sleep and Home buttons together, and now, it doesn't want to turn on at all! When I try to turn on, only the "Apple" symbol appears ad disappears, goes back off, no power, after a few seconds. Any heard of this or experienced something similar? Anyone know any tricks if so? And, no, I have no time to go to AppleCare, especially since it's an outdated, 1st genration iPod Touch, and for that I feel no need to make an urgent appointment to them. I appreciate any feedback. Thanks!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Iphone wont restore, reboots during restoring process.

    I reseted my iphone 3gs to its original setting. And then i chose reset and clear all data. Iphone turned off and looked like its clearing data. Then it reboots and afterwards it was stuck on the apple logo . I don't know what to do. Please help me.so i connected it to itunes and tried to restore it. It restarted and itune displayed 1611 error. Now my iphone is just showing connected to itune.

    Hello, parasfrompak.
    Here is the article that provides the troubleshooting steps for issues with restoring an iOS device. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Regards,
    Jason H. 

  • IPod OK on windows XP, Mac OSX, but not Vista

    Just got a new (refurbished) 5th gen ipod 30G. It syncs fine to my mac OSX laptop. It also syncs fine (after restoring) to my Windows XP laptop.
    But when I connect it to my windows Vista (the preferred laptop per the primary user of this iPod) it will mount in the OS and show up as a removable drive (F:) and I can click on the drive and see the default directories.
    When I launch iTunes, I wait about 5 minutes then I get an error "iPod found but the name is not recognized. Try disconnecting the iPod and reconnecting" and it never shows up in iTunes.
    I did get it to show up once in iTunes, and tried to do a restore, but after the restore ran for a while, it gave an error "iPod could not be updated. Device can not be read from or written to" (error paraphrased) and gave an error code 1437, I think.
    I've tried restoring it on each of the OSX and WinXP machines before trying to connect to the Vista machine, but I get the same results each time.
    All the messages I can find say that 5th gen iPods should work fine with Windows Vista but mine isn't working...

    That sounds odd that one Windows OS is working, but the other is not.  Is there anything in your logic that could change the view states of these controls?  If you'd like, I'd be willing to also take a look.  Feel free to send your project or installer to [email protected] and I'll try on my systems.
    Chris

  • MBP running Mac OSX Leopard 10.5.8 cannot get past login screen even in safe boot

    Help!  I have a Macbook Pro purchased in 2009, running Mac OSX Leopard 10.5.8 which froze while running Adobe Illustrator.  On reboot, it won't allow me to go past the login screen.  I tried starting up from the disc, running disk verification and repair and repairing disk permissions, and trying to start up in safe boot, all to no avail.  When the login screen comes up it gives the name of my hard drive with a (2) after it, which seems strange.  Any suggestions short of reinstalling the system software?  I don't want to lose my applications/data!

    AnointedOne wrote:
    My 1 year old MBP running OSX has got more sluggish. The little multicolored spinning timer wheel keeps appearing a lot more now, and I hate it! My MBP takes drastically longer to boot when i turn it on as opposed to when I just got it. My web pages take a long time to load. Can anyone help me? WHat can I do to speed up my MBP. I am a novice mac user. Again my mac is getting slower by the day and i dont know how to increase its overall performance. Is there any simple software that can boost overall performance or will I have to reformat my MBP? I have a 200gb HD with 50 gb free and 4 gb of ram.
    Welcome to Apple's discussion groups.
    Launch the Activity Monitor utility. Pull down the list near the top and set it to "All Processes". Click on the "CPU" column heading to put the highest CPU consumers at the top. Also click on the "CPU" tab in the lower part of the window to check the value for "% Idle". If that value is much above zero, check the other categories for signs of resource problems. If nothing there points to a possible problem, launch the Console utility and look for messages that might suggest a problem. If you see messages that you have trouble interpreting, post them here and someone should be able to help.

  • Mac osx 10.6.7 factory settings

    Where is mac osx 10.6.7 factory settings
    How to restore mac osx 10.6.7 factory settings

    If you want to put the Mac back to the state it was in originally, boot to the first gray DVD it came with and do an Erase and Install. Make sure you back up any personal information first, because it will be gone.

  • Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

    Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

    Hi
    Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
    The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
    A reinstall should leave all your own personal data and programs in place.
    Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
    Message was edited by: softwater

  • I am trying to restore my mac osx 10.7.4 from an ext lacie harddrive and getting message "u can't open the application lacie backup support because power pc application are no longer supported"

    i am trying to restore my mac osx 10.7.4 from an ext lacie harddrive and getting message "u can't open the application lacie backup support because power pc application are no longer supported"

    Use any number of free alternatives to your nearly decade old version of MS Office.
    Consider
    LibreOffice (donation-supported)
    NeoOffice (free)
    OpenOffice (free)
    In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft.

Maybe you are looking for

  • Maintenance View Function group transport,

    Dear all, I've made some change on the screen related to my Z maintenance view in dev. It did not requested for a transport order. Therefore I am wondering if there would be any way to transport the whole Maintenance view without having to re create

  • How to search for exact string?

    Is there any way to search for the text string exactly as I enter it? Like 'exact search' in the OSS notes? For example, I'm trying to find the forum posts regarding the Excel 2007 file format XLSX. By XLSX the search finds hundreds of entries, but m

  • AD FS Windows Server 2012 R2 - Deployment Scenario

    I am deploying with following scenario, need your expert advise. Customer local domain abc.local à AD FS servers member of local domain (ADFS1.abc.local, ADFS2.abc.local). ADFS server farm setup with two server load balanced on F5 (sts.abc.sa), inter

  • I give up. Where's the library?

    I've created a library, but now I can't find it. Under Window/etc. there is no library.  How do you access it?

  • Message error " no vendor specified"

    Dear experts, I am using the ABAP Message Statement u2026 i.e   message ' Data not found ' type 'S'. But it always return the same message for every message statement that is u201C no vendor specifiedu201D << Take your time >> Regards, Riz Edited by: