Mac OSX server not supported behind Airport Extreme NAT router?!!

For a customer, I recently installed a new XServe, within a local network with an Airport Extreme (n) with FW 7.4.2. Mac OSX Server manages the router (which has a fixed IP from the ISP). Because the Mac OSX Server runs a DNS server (supporting a local domain), OSX Server reconfigured the Airport Extreme, so that it would forward DNS queries to the server. The server's dns server will forward queries for non-local domains to the ISP's dns servers.
All clients get their IP configuration using DHCP from the router. You can't use the DHCP service of the server, as you can't disable DHCP on the router (in NAT mode).
All clients get the router's IP as the dns server.
HOWEVER:
The Airport Extreme can't connect to the internal DNS server! *It doesn't seem to be able to route dns requests to the internal network* (verified using nslookup). Any dns queries sent to the router will time out.
Come on, Airport Extreme team.. you can't claim the Airport Extreme to be the ideal router in combination with an OSX server, if this simple and very common setup is not supported! How hard can it be to either:
...*Allow us to disable DHCP on the router* (even when in NAT mode), so we can use the OSX server for this (which will dispatch the correct DNS settings)
...*Allow the router to route DNS queries to the local DNS* (OSX) server (which should be working anyway)
Message was edited by: blackbit

blackbit, Welcome to the discussion area!
It doesn't seem to be able to route dns requests to the internal network (verified using nslookup).
That is true.
This is a user to user discussion area so Apple will not see your suggestions here. Instead go to www.apple.com/feedback/airportextreme.html and send them to Apple.

Similar Messages

Mac OSX Server VPN Not Working

Heres how my setup is: I have an ATT DHCP Server/Router That assigns my public ip.
I have an Apple AirPort Extreme in Bridge Mode Which hosts the main wifi connection.
I have my Mac OSX Server connected to the AirPort Extreme
On my ATT Router DHCP Server's Firewall I have my computer set to DMZ Plus mode which forwards all ports on the network to my mac.
I am trying to connect to the vpn network via my MacBook Pro and iPhone5 and I cannot. However I can connect to the online wiki page on my server by going to server.djswirkmke.com if you would like to see it. My host name is server.local on the network but on the internet it is server.djswirkmke.com I also have a mail domain setup as mail.djswirkmke.com. My problem is I am not able to connect to the vpn on the client computers can you please help?

In a moment of random frustration, I tried listing the DNS server in VPN settings three times, and it somehow fixed the problem. Even though it is the same IP all three times, it works when it is listed three times but not when it is listed just once.
In other words, in VPN > Settings > Client Information > DNS Servers, I have:
192.168.100.64
192.168.100.64
192.168.100.64
Hope this helps someone having the same problem.

Not installing Mac OSX Server 10.5.4

Hello Friends...
I purchased Mac OSX Server 10.5.4 Leopard DVD.
I would like to install and configure it.
According to the manual , its not working.
It is getting upgrade to my Mac mini 10.5.7.
After installing , it wants to restart. But, its not booting and getting always restarted.
So, any advices and suggestions from your side.
Regards,
Bhanu

I'm going to point you to these two places to see if you can resolve your issues:
http://discussions.apple.com/thread.jspa?threadID=2019706&tstart=300
http://support.apple.com/kb/HT3479
Basically what happens is if you insert the Server install DVD and start the installer package, if the DVD will boot your Mini it will show the 'Restart' button. If it can't, the installer will run and then you should follow the instructions in the second link.
Given the fact that many have tried and failed with the second method, I would attach the Mini, in target disk mode, to another Intel-based machine and run the install from there with the Mini as the target. Then boot the other machine from the Mini's disk and let the Setup Assistant finish -don't configure any services on the server in this mode other than setting it up as standard or advanced, apply any updates and then restart. Then shutdown both machines, detach the Mini, then let it boot on its own and continue configuration from there. I've done this several times with both PPC and Intel-based machines with positive results.

Using Airport Utility, OS X Yosemite sometimes does not find my airport extreme and my iphone 6 with 8.1 does find it. Is anyone else experience this glitch? Also I couldn't log on to Apple Support... Thanks

Using Airport Utility, OS X Yosemite sometimes does not find my airport extreme and my iphone 6 with 8.1 does find it. Is anyone else experience this glitch? Also I couldn't log on to Apple Support... Thanks

*Feedback*
"Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
http://www.apple.com/feedback/ipad.html
We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
   -- click on New icon
   -- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
   -- etc.

Hard Drive not showing in Airport Extreme

i am using windows 7 ultimate 64 bit operating system
I have the hard drive showing in the Airport Utility but can't access the files
Now i have tried all of this from the apple website with no luck, am i missing something here i have read that it only supports fat32 operating systems which the hard drive is but struggling to connect to it.
Any advice is appreciated
Automatically mounting hard disks
From the main window of AirPort Disk Utility enable "Show AirPort Disks in the menu bar".
Enter the username and password required to access the AirPort Disk(s).
Manually mounting hard disks using the AirPort Disk menu bar item
Click the AirPort Disk menu bar icon () and select the Base Station with desired USB hard drive.
Select the desired hard disk(s) (AirPort Disk).
Enter the username and password required to access the AirPort Disk(s).
Manually mounting Mac OS Extended (HFS+) volumes
From the Finder's Go menu choose Connect to Server.
Enter the AirPort Extreme Base Station's LAN IP address (by default 10.0.1.1).
Enter the username and password required to access the AirPort Disk(s).
Select the desired AirPort Disk(s) from the available Volumes.
Manually mounting FAT16/FAT32 volumes
From the Finder's Go menu choose Connect to Server.
Enter the AirPort Extreme Base Station's LAN IP address preceded by smb:// (for example, smb://10.0.1.1 )
Enter the username and password required to access the AirPort Disk(s). Leave the Workgroup field empty unless you have assigned one in AirPort Utility.
Select the desired AirPort Disk from the available CIFS (Common Internet File System) volumes

You can usually enter anything you want for the user name, but the password will need to be the device password for the AirPort Extreme....(not the wireless network password).

Installing Mac OSX Server hangs at Network Configuration

Hi there!
I am installing my new Mac OSX Server (SNow Leopard) straight forward the assistant.
Asking for Language: OK
Asking for Country: OK
Keyboard Layout: OK
Entering License: OK
Configuring Network:
Ethernet: Static
Airport: OFF
FireWire: OFF
Clicking on Forward to continue: The assistant keeps telling me "configuring network". Nothing happens. It is doing that for hours now.
I tried to connect with Server Admin tool: OK works.
The network is up and running, but the assistant is not continuing.
Any ideas?
Thanks for any help or suggestion

Smells vaguely of a DNS error or IP routing or a network connectivity problem.
What did you specify for your network settings, and particularly what was entered for the DNS server address? If you're not running DNS on your local network here, then enter no DNS servers as part of the prompting, and let Mac OS X Server establish its own default single-host DNS.
(You're not going to be able to use your ISP DNS here; those ISP DNS servers are not valid when you are establishing a server on a network behind a NAT gateway.)
I'd probably wipe the disk and boot from DVD and reload.

Bridge CS6 Mac cannot browse Mac OSX server 10.8

Hello:
We had a drobo file server which was mounted on the desktop and had no issues browseing the volume in bridge. After we moved to a new Mac OSX server running 10.8 we can no longer browse the mounted server. We get a primission violation. Using the finder we're able to browse files and folders and create new files without this same type of issue.
Is there a preference that allows connection to a network volume via Bridge?
I hope I was clear on the discritpion of the problem.
Thanks,
Rick

Try a reset of preferences for Bridge using option key while restarting Bridge and choose reset prefs.
There is also a plist file for Bridge in the user library preferences folder that can be manual deleted and will be refreshed after restarting Bridge.
And maybe run a check and repair permission with either Apple Disk utility or cocktail.
Unfortunately Bridge is not designed for use over a network nor official supported by Adobe when it comes networks.

Printer supported by Airport Extreme

What All-In One Printer (Printer, Copier, Fax) works with Airport Extreme. I currently have HP Officejet 5610xi All In One Printer but I could not add it on the Airport Extreme Router. Also, I have both Mac and Windows PCs networked via Airport Extreme. I have tried setting up the PCs by bonjour for Windows. Would I have a problem with this kind of network? I am particurlar with print sharing - ie both my pcs and mac should be able to print via APE.

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link.
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help:
o Printer troubleshooting for AirPort Extreme and AirPort Express
Finally, check out this IBM support article to see if the printer you are interested in is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Adding Bootp/DHCP Options to Mac OSX Server 10.4

Our telephone supplier - Splicecom (http://www.splicecom.com/) - has asked us to ensure that option 66 and option 67 are enabled in order for their PCS400 handset to pick up an IP address from our Mac OSX Server DHCP server.
Please can somebody advise on how to either:-
a) ensure that they are already enabled
or
b) tell me how to enable them
Many thanks
Paul

I think you need some other DHCP server to acheive what you need
option #66 = Boot Server Host Name
option #67 = BootFile Name
(Try "man bootpd" in Terminal.)
The ISC DHCP server can be installed in OS X using PortAuthority / DarwinPorts:
"dhcp 3.0.3, Revision 1, net/dhcp (Variants: darwin_8)
http://www.isc.org/products/DHCP/
ISC's Dynamic Host Configuration Protocol Distribution reference implementation of all aspects of the DHCP protocol, through a suite of DHCP tools: A DHCP server, client, and relay agent. These tools all use a modular API which is designed to be sufficently general that can easily be made to work on POSIX- compliant operating systems and also non-POSIX systems like Windows NT and MacOS. The DHCP server, client and relay agent are provided both as reference implementations of the protocol and as working, fully-features sample implementations. Both the client and the server provide functionality that, while not strictly required by the protocol, is very useful in practice. The DHCP server also makes allowance for non-compliant clients which one might still like to support.
Platforms: darwin
Maintainers: [email protected]"
But you'll need to configure this DHCP using a texteditor.

Imac will not connect to Airport Extreme when configured WPA/WPA2

Imac will not connect to Airport Extreme when configured WPA/WPA2
Posted: Jul 5, 2007 8:22 PM Reply
I just got my Imac to connect to the internet using my Airport Extreme but only by using WEP. I had my Windows XP SP2 machines connecting using WPA/WPA2 with no problem. The Imac will not connect using anything other than WEP, and 1 of the XP machines will not connect using WEP.(I have not tried the other XP machines) I had to set the Airport Extreme for an open network in order to let both computers access the shared hard drive and access the internet.
I don't know what the problem might be and would appreciate any suggestions.
MacBookPro, Imac Mac OS X (10.3.9) Fujitsu tablet PC, 2 XP desktops

hehe...on the visuals. I figured it out already, and I have the old airport card. However, I did a chat with Apple support and while we were chatting I found a USB adapter with MAC drivers which will work. It is:
Hawking Technology HWUG1A Wireless-G USB Adapter with Removable Antenna for Macintosh
Manufacturer Part# HWUG1A
That is the only adapter that actually does WPA/WPA2 that I can find that is for a Mac and not just an older USB that only does WEP. It surprises me that Apple does not have a USB product like this. Anyway, for $56 including shipping, I will have it by Monday or Tuesday. Pretty cool.
Thank you so much for your assistance. It is appreciated.
Lynn

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

How do I re-install my Mac OSX Server from scratch

Hi,
I have purchased two MacMini Servers with 10.6 OSX Server software pre-installed.
I have changed the organization as our company name changed and run into license issues.
I want to re-install the Mac OSX Server software and start from scratch. How do I go about this. I tried yesterday for many hours to do so and the new installs are still running into duplicate license issues and other issues. What is the best approach to do re-install? I am willing to erase the internal Hard Disk and boot (with an external DVD optical drive) if that is the best way to go. What are the steps?
I have the original CDs or DVDs and have extra, external hard disks to do a Time Machine backup, etc.
Thanks,
Don

If you are looking to do a nuke and pave of the system, and you have an external optical drive, then yes, that is likely the most direct method. Connect the optical drive, insert the installation DVD, and reboot the system targeting the optical disk as the boot volume (you can do this by holding down the C key or the Option key during startup).
Now, if you do not have an optical drive, you can put the installation disk into another Mac running 10.6 and use the Remote Install Mac OS X application in your Utilities folder.
Hope this helps

Need help setting up Mac OSX Server for remote/off-site access

Hello, I want to be able to access our g5 tower running Mac OSX Server 10.5.8 remotely when not in the office. We have a static IP.
Are there easy step-by-step directions someone could provide or point me to? Thanks a bunch.

Hi
its really easy
You need to have Apple remote desktop
there are bunch of software s like chichen vnc and etc.
01. open your router from your web browser
02. go to nat settings
03. screch the option calld port forwading
04. enter the server ip address to that
05. save and restart the router
** What you did so far
if some one want to connect from your static ip address now it will forwerd to your server. *******
Go to system preferences (on server)
go to sharing
enable remote management
select opetions which you want
your done
2nd part Adding Computer to ARD
Select All Computer ----> click plus button and select add by address
put the Address : ip address
user name : server User name
password : server password
eureka
now you done

How to tether Mac pro to existing wifi with airport extreme

Wifi where I live. Need Mac pro on net. Have airport extreme. Does apple disable this for marketing reasons to sell wifi internal card? Or, can I use what I have? Thanks! Using Lion
BTW. Mac is less stable with Lion!!!! Like using microsoft used to be :-(

2009 and earlier Mac Pros did not include a Wi-Fi card in the standard configuration.
Check the System Information app (in the Utilities folder) -> Network -> Wi-Fi and see if it indicates a wireless card is installed.

Why Airport Utility not pick up AirPort Extreme?

Suddenly AirPort Utility on MacPro not picking up AirPort Extreme for wireless. Other Macs in house connecting just fine.

Restart the AE and try again.

Mac OSX server not supported behind Airport Extreme NAT router?!!

Similar Messages

Maybe you are looking for