Mac PC two routers question

My wife is getting a new iMac and has a macbook i have a windows based PC connected to a Linksys router, i thoutht it would be a good idea to have her apple computers have their own backup so i bought her a timecapsule, i have read most of the threads about connecting it to the router as a bridge, the question i have is, if i connect to the router as a bridge will the time capsule be able to back up both her imac and macbook, and in reguards to this will it back up the macbook wirelessly and should i connect the imac to one of the lan ports in the time capsule... Wheww
Thanks Don

if i connect to the router as a bridge will the time capsule be able to back up both her imac and macbook
Yes, and several other Macs as well if you want.
and in reguards to this will it back up the macbook wirelessly
Yes, but we would strongly recommend that you perform the first backup using an Ethernet cable connection since the entire contents of the Mac is copied over on the initial pass. Using Ethernet will be at least 3-5 times faster than wireless. You can use wireless for subsequent backups since they will only take a few minutes.
and should i connect the imac to one of the lan ports in the time capsule.
If possible, you should always connect using an Ethernet connection. As I mentioned, it is 3-5 times faster than wireless....and you will never have any wireless interference issues with cordless phones or other nearby wireless networks.

Similar Messages

Two part question 1) what happens if you sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? 2) does installing messages beta on os x lion 10.7.5 delete ichat?

Two part question
1) what happens if you sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? can you stil use AIM, jabbar, google talk, or yahoo? if you open messages beta does it immediately tell you that messages beta expired?
2) does installing messages beta on os x lion 10.7.5 delete ichat or just transform ichat into messages beta giving the illusion that ichat is deleted?

Hi,
It was never completely clear whether it was just hidden or whether Apple ran a download page for iChat 6.
As the Download for Messages Beta was separate and "Deleted" iChat it would seem it would be another download for iChat 6.
iMessages will not function as it is only an Account type within Messages and iChat 6 does not have it.
Therefore messages on the iPhone will not sync to the Mac. (until you get Mountain Lion and Messages in that OS X version).
Mountain Lion and it's full version of Messages will not sync the iMessages that have happened in between the 14th December 2012 (end date of Messages beta) and the Install of Mountain Lion if you decide on that route.
8:51 PM Sunday; May 5, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Using two routers for the same SSID

So here's my story. I have a standard Actiontec router in my basment, connected straight to the coax outlet, and connected by LAN Ethernet to a crappy computer nobody uses. It gives off a WPA2 wifi network, let's call it MyNetwork. For the longest time it's been the only router in the house. The coax outlet is on a splitter, splitting the coax outlet into one wire that goes to the Actiontec modem/router and the other to my TV STB. Recently we installed a new coax outlet on the other side of my house and next to it we have a brand new desktop computer that we use often. It has no wifi so and we can't run an ethernet cable throughout the entire house so we got a new Actiontec modem/router from our neighbor who just moved out. It's the exact same Actiontec device.
What we want to do is make it so that both routers give off signal on the same MyNetwork we have to make it a wider reaching signal, and so that I can connect the new desktop computer to the new router with an ethernet cable. I've read so many guides and they're all so confusing and it's such a mess that I almost completely screwed over my network. it seems like the two routers are completely independent of one another, not even aware of the others' existence. The new router is definitely in range of the old one. I've logged into 192.168.1.1 on the new computer and the new router seems to think it IS the old router (or so I think). It showed me all the same devices that have connected to MyNetwork and such, but then again it's always hard to be certain exactly which device is which. After messing around I must have changed some IP address or something, but it seems that 192.168.1.1 doesn't take me to the Verizon login screen, but 192.168.2.1 does. Can I reset those IP addresses?
And of course, can somone please provide a clean, easy to follow course of action as to how to set up two routers on one network?

maxbirch wrote:
... I have a standard Actiontec router in my basement ... connected by LAN Ethernet to a computer ... It gives off a WPA2 wifi network, let's call it MyNetwork ... The coax outlet is on a splitter ... one wire that goes to the Actiontec ... other to my TV STB ...
... installed a new coax outlet on the other side of my house ...
... What we want to do is make it so that both routers give off signal on the same MyNetwork we have to make it a wider reaching signal, and so that I can connect the new desktop computer to the new router with an ethernet cable ...
... can somone please provide a clean, easy to follow course of action ... ?
I suspect it might be a good idea to step back reconsider your ultimate layout. Essentially you now have two (or if the STB is also included, three) coax drops connected to the ONT. It seems that you desire that one of these service the STB, and the other two each service a desktop and a wireless access point. If this is the case, continue reading.
There is no need to consider the original Actiontec router as the primary router, wireless or otherwise. Use the new coax location to connect to the primary Actiontec router (you can use either router). For starters, reset both routers to their factory defaults using the reset switch on the back of each device (for details, do a search).
Once the primary router has been located (or relocated) to the new coax drop, just connect the new desktop there using an Ethernet cable connected to one of the LAN ports on the back of the router. Then set up your primary wireless network based on this router (once again, do a search on these forums for specifics on setting up a basic wireless home network).
Now use the original coax outlet where the first router was located to set up another access point. This access point will provide Ethernet connections plus an additional wireless network (if it's still needed). However you cannot have two wireless devices on a single home network with the same SSID (i.e., network name). Here are details on some methods to do this:
http://www.dslreports.com/faq/12506
For additional details, here's the complete FAQ:
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=1&cad=rja&sqi=2&ved=0CCwQFjAA&url...
Take a careful look at these suggestions and references to decide if this is what you want. Then report back if there are remaining questions. Good luck.

Two random questions

hey guys.. i have two random questions..
1) when you recalibrate your battery... after you drain the computer and leave it for 5 hours.. when you RECHARGE IT (before its fully recharged) are you allowed to use it? or are you only allowed to use the macbook AFTER it's recharged... (because in the instructions it only talks about using it for the 2 hours AFTEr it's rechaarged)
2) also... i always wondered if there was a better alternative between amc the ripper and handbrake (since mac the ripper apparently can rip different region coded dvds)... but ir ealised mac the ripper does FULL dvd rips whilst handbrake converts it into like mp4 and stuff... is that true? (as in.. u cant do vice versa on each?)
thanks a buncho everybody! go the mac..

2) I use handbrake if I am planning on watching the
DVD on my ipod etc and Mac the Ripper to copy
(Backup) full DVDs. Obviously I do this in America as
it's illegal for some reason in the UK.
It is illegal in the US too. Seems "fair use" does not apply to DVDs and disabling the copy protection (which you do when you rip your DVD via mac the ripper or handbrake) is against the law.

ACE 4710 transparent LB with two Caches and two routers.

Hello,
I have ACE 4710 that load balance two cach flows (bluecoat), i am doing pbr on the routers to send the traffic destined to port 80 to ACE then Cach farm. After that the Cach flow will get the page from the internet via two routers. The return traffic will match another pbr on the routers with source port 80 that will send it to the ACE then CachFlow again .....then to the users.
I am not using ip-spoofing on the CachFlow for now. In the figure attached i created a VIP 0.0.0.0 0.0.0.0 port 80 on the interface on the ACE facing the routers, but the question is do i have to create another VIP 0.0.0.0 0.0.0.0 port 80 on the interface on ACE facing the Cach Flow? or just forward the traffic on the default route? What might be the default route since i have to use two routers and i cannot use hsrp?
Kindly I need some assistance
Thank you and regards,
George
access-list PERMIT_ALL line 8 extended permit ip any any
access-list CFLOW line 8 extended permit ip any any
ip name-server 8.8.8.8
ip name-server 4.2.2.2
##################################Config for Cache Cache Servers###################
probe http CISCO_WWW_PROBE
ip address 72.163.4.161
interval 2
faildetect 2
passdetect interval 2
passdetect count 5
request method head url /index.html
expect status 200 200
exit
probe http YAHOO_WWW_PROBE
ip address 87.248.112.181
interval 2
faildetect 2
passdetect interval 2
passdetect count 5
request method head url /index.html
expect status 200 200
exit
serverfarm host TRANSPARENT_PROXY_SF
description Transparent Proxy Farm
transparent
predictor hash url
probe CISCO_WWW_PROBE
probe YAHOO_WWW_PROBE
rserver CFLOW01
    inservice
rserver CFLOW02
    inservice
exit
exit
############################################# Router Cache Farm ############################
probe icmp ICMP_PROBE
description *** Probe for icmp health monitoring ***
interval 5
faildetect 2
passdetect interval 60
passdetect count 2
exit
rserver host Router01
description Connection to Sodetel Router
ip address 192.168.14.4
probe ICMP_PROBE
inservice
rserver host Router02
description Connection to IDM Router
ip address 192.168.14.5
probe ICMP_PROBE
inservice
serverfarm host Routers
description Transparent Proxy Farm
transparent
predictor hash url
probe ICMP_PROBE
rserver Router01
    inservice
rserver Router02
    inservice
exit
exit
################################# Management################################
class-map type management match-any REMOTE_MGMT
description Allow Remote management for below protocols
8 match protocol icmp any
9 match protocol ssh source-address 172.31.13.31 255.255.255.255
10 match protocol ssh source-address 172.31.31.21 255.255.255.255
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_MGMT
    permit
class-map match-all CFLO2Internet
2 match virtual-address 0.0.0.0 0.0.0.0 any
class-map match-all TRANSPARENT_VIP_CM
2 match virtual-address 0.0.0.0 0.0.0.0 tcp eq www
policy-map type loadbalance first-match TRANSPARENT_LB_PM
class class-default
    serverfarm TRANSPARENT_PROXY_SF backup Routers
policy-map type loadbalance first-match CFLO2Internet_LB
class class-default
    serverfarm Routers
policy-map multi-match CFLO2Internet_PM
class CFLO2Internet
    loadbalance vip inservice
    loadbalance policy CFLO2Internet_LB
    loadbalance vip icmp-reply active
    connection advanced-options TCP
policy-map multi-match L3L4_PM
class TRANSPARENT_VIP_CM
    loadbalance vip inservice
    loadbalance policy TRANSPARENT_LB_PM
    loadbalance vip icmp-reply active
    connection advanced-options TCP
====Interfaces======
interface vlan 11
description Interface between Routers and ACE
ip address 192.168.14.2 255.255.255.224
alias 192.168.14.1 255.255.255.224
peer ip address 192.168.14.3 255.255.255.224
no icmp-guard
access-group input PERMIT_ALL
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input L3L4_PM
no shutdown
interface vlan 21
description Connection to CFlow ServerFarm
ip address 192.168.12.2 255.255.255.224
alias 192.168.12.1 255.255.255.224
peer ip address 192.168.12.3 255.255.255.224
no icmp-guard
access-group input CFLOW
service-policy input CFLO2Internet_PM ------>>>> Is this necessary???
no shutdown

Hi George,
In the topology you described, only the service-policy in the interface towards the routers is necessary. For the traffic from the caches, the ACE will just forward to the default gateway.
The only problem is, as you mentioned, that you cannot use HSRP. In that case, you can still configure two default gateways, but there is no way to predict which one the ACE will use at a given time (the way it does to select the one it will use is sending an ARP request to both gateways and using the one that replies first until the ARP entry expires)
If you need to load-balance the traffic between both routers, then yes, you would need to configure a new VIP on the cache side and load-balanced to a transparent serverfarm composed of both routers.
Regards
Daniel

Connect two routers-wireless

Hello, I am looking around the forums and can't find and i'd like to know next:
I have two routers Linksys (wrv200 and wrt110). One on one side of the house, the other will be at the other side od the house. Questions:
- Is it possible to wirelessly connect second to frist
- Second willl broadcast the same SSID (wireless and other settings) as the first and will have the function of covering the signal on the other side of the house and outside, where the first virtually could not
- Which one of these two routerja recommend as the first (connect to a modem)
- What is all need to set athe first and second routerj
Thanks for help.

You cannot connect two Linksys Routers Wirelessly, you have to have them connected with cables...see this

Add time capsule to existing network to make subnetwork (two routers?)

We have a modem/router (motorola) provided by isp to connect to internet. Most devices connect to this wirelessly. We just purchased an Airport + Time Capsule to create a subnetwork (add to existing network via ethernet cable), so that only a few devices can wirelessly connect to Airport + Time capsule to store time machine back up and to wirelessly print to one printer connected by usb to Time Capsule. When I select "I want to add to existing network" the motorola only shows up as a wireless, can't see the wired option. I tested that the ethernet cable works and connected to one port on motorola and WAN on Time Capsule. How do I tell Airport + Time Capsule to connect to motorola modem/router via the ethernet cable? I think I want it to connect via cable because I don't want the Airport to replace the existing router, rather I want to end up with two routers (one for entire network, and second one just for subnetwork).
Thank you.

Ok, your question confused me with the airport and TC as if it is two things not one.
when I connect the ethernet cable to TC, why doesn't modem/router show up in connect to list? Or if wrong list, where should I look, to select, to get it to "see" what it is connected to by ethernet?
Are you using v6 in Lion utility? I am using SL with 5.5 utility. There is no such place that I can find. (You will do better downloading and using v5.6 for Lion anyway).
On the manual setup.. summary page it will show the IP you get on the WAN port. From default settings this will all work properly.. there is nothing you need to do.
Plug ethernet from modem router to TC wan port. When you do the TC will get an IP.
If you open the internet tab, you can see Connect using.. ethernet. Just leave that. and everything else on auto.
For connection sharing, you still need to share a public IP.. although TC will complain you are not using public but private IP.. there is nothing you can do about that. Just set the TC to ignore the error double NAT.
When I began installation, I plugged everything in, then plugged in power. I opened Airport Utility, and followed on-screen instructions, but when selecting "connect to existing network with ethernet cable" my modem/router doesn't appear in the list.
Do not use connect to existing network.. that will bridge the TC which you don't want.
You have to use the existing network as if it is public network. And stuff behind your TC is private.
If I set the TC to bridge mode, won't it "take over" all router activity, and the first group of computers won't be able to connect directly to motorola? (I don't want this first group of computers to be able to connect to the TC).
Also, I don't want the TC to connect to the motorola wirelessly.)
If you set the TC to bridge it will not route at all... it will become a client of the existing network. And all IP addresses will be taken from the Motorola.. you will have one flat network, which is what usually people want.
If you are still struggling.. do this.
1. Tell me the IP address the existing Motorola is passing to the clients. Your one big issues here is making sure they are in fact on two different subnets.
2. As long as condition of 1 is fulfulled this will work at default setting. Reset the TC by holding down the reset for 10sec.
Plug Lan motorola to WAN TC.
Plug a computer into the TC to do setup.
Set up as if you have public IP on wan. Tell TC to ignore double NAT.
Set wireless and TC names as you want.
Now test internet.. on a client computer on the TC. it should work fine. At least for everything that doesn't need interactive connection.
3. You can improve things by using DMZ in the Motorola to the TC. That alleviates at least some of the issues that arise with double NAT.

Two dumba$$ questions

Sorry, I know these are two really stupid questions, but I know nothing at all. I've just bought a new iBook after ahving a really ancient Mac. Both my questions are to do with Garageband...so here goes...
Question 1
What other equipment do I need to be able to record real instruments (string quartet)?
Question 2
I was just having some fun the other night, making up some stuff and trying to familiarize myself with the whole Garageband thing (which I love already).
As I was adding loops I had the sneaking suspicion that some where starting to go missing - why was there an 'Acoustic Noodling' numbers 2, 3, 4 etc but no number 1? Where were 'Asian Gamelan' 3 and 4?
Chose not to save anything I'd done so far and after did a quick search in the Garageband loops search bit, but nothing came up. Went through the installation disk thinking it would put back anything that had gone missing. Still nothing. Did a spotlight search and a few of the items I thought had gone missing were in iTunes.
Maybe they were never in the Garageband loops samples first place? Is this possible? Is there somewhere that lists what loops come with Garageband? I'm starting to doubt my own sanity, especially since I went through the installation disk...
I now have the following samples on my desktop - ones which I thought had gone AWOL:
Acoustic Noodling 1; Asian Gamelan 3 and 4;
Middle Eastern Oud 3 and 4.
I have tried to drag them into the Garageband loops section, but they seem to disappear into the iTunes...I have no idea what's going on...
Apologies in advance for these dumb questions.

For what you need to do your string quartet recording, read HangTime's FAQ to get started:
http://www.thehangtime.com/gb/gbfaq2.html
Contrary to what you might think, you probably don't want to record the four members of the quartet separately on their own tracks, each with a mic close to the instrument. String quartets need to play all the parts together at once, to get the best feel and performance.
You'll probably want to put up a pair of mikes arranged in a stereo pattern, at some distance from the string quartet (a couple of meters at least), in a nice live-sounding room. Mike placement techniques are hard to describe in this kind of forum, but you can find textbooks on the subject with diagrams.
You'll need a matched pair of better-than-average-quality condenser microphones, and an audio-to-computer interface with better-than-average preamps.

Ways to connect two routers

Hello,
We have two routers connected as shown in the diagram:
We would like to create a one-hop connection ("peering") between the two routers (over the link shown) for routing purposes (iBGP, OSPF, static routes).
What are the suggested way(s) to do it?
Method 1: We have tried creating two GRE tunnels (one for IPv4 and one for IPv6) and it works but we are having various issues (which we are still troubleshooting)
Method 2: We could create IPSec tunnels; I have not tried it.
Method 3: This is my main question here. Can we define a common VLAN on the two routers so that, by using trunk links in-between, the two interfaces (actually a new subinterface of each: R1,G0/0.x - R2,G0/1.x) can coexist "alone" on one VLAN?
Other suggested methods please?
Thanks in advance for your assistance.
Regards,
Nick

Thanks for the reply.
Here is the current setup:
{View image and zoom in to full scale for clearer reading!}
With this configuration, the tunnels seem to be working correctly, however we are still having a problem: When I switch traffic so that it uses the tunnels, netflow export from R1 to a netflow server (using nfdump/nfsen) which is located at a LAN connected to R2, is not recorded correctly; I see (on R1):
# sh ip flow export
Flow export v9 is enabled for main cache
Export source and destination details :
VRF ID : Default
Source(1) 195.251.xxx.yyy (Loopback0)
Destination(1) 195.251.xxx.xxx (9995)
Version 9 flow records
680074 flows exported in 8490 udp datagrams
0 flows failed due to lack of export packet
1579 export packets were sent up to process level
0 export packets were dropped due to no fib
0 export packets were dropped due to adjacency issues
0 export packets were dropped due to fragmentation failures
0 export packets were dropped due to encapsulation fixup failures
and I find that our traffic is not recorded correctly. (When we don't use these tunnels -but another route not shown in the diagram, which does not involve tunnels- then "export packets sent up to process level" are 0 and netflow export works correctly.)
Netflow monitoring is critical to our network, so we have to troubleshoot this, before we can use this configuration in production. (I am thinking of opening a new thread for this problem.)
Any and all suggestions will be welcome.
Nick

CSS11506 SQL and two routers

2 questions
Can I use a CSS11506 to duplicte writes to a pair of SQL databases. I need to ensure that when a webserver writes to one SQL server the switch duplicates this so that it is written to both SQL servers.
Can I use the CSS11506 to balance my website across two routers. The site will be connected to the Internet by two isp links.
Thanks for any help

The CSS 11500 series switches do load balancing among multiple web servers. Guess it should be possible to balance across routers too. But I have no experience with this. Would some one else like to comment on this?

15" i7 Macbook Pro from early 2011.takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get

Hello All,
I have a 15" i7 Macbook Pro from early 2011. The past few weeks, it has been getting increasingly difficult to get on my computer. It takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get to the dark gray log-in screen. Even when I finally get logged in to start working, thinking it would be okay now, it shuts down randomly.
I've ruled out the possibility of a software problem because I've just done a clean re-install of Mac OS X Mavericks on my computer just yesterday.
I did upgrade the RAM recently, about a month and a half ago, from 4GB to 16GB, I went to the apple store four days after that upgrade to have them do a hardware test, and clean the inside of my laptop, which helped with previous heat issues. When they did the hardware test, the hardware was all registered as fine from their system.
I've tried resetting the SMC, PRAM, and doing the internet recovery hardware test, but to no avail. I thought I could at least find out what parts needed to be replaced from the hardware test but it seems that when the hardware test is almost finished, the computer just shuts down, So I am unable to see the results.
My computer is also having battery issues, under battery condition, it says "replace now," parts have been ordered, waiting for arrival. But if the battery health is low, it should still boot up fine, it would just hold a significantly less charge.
Could this be a hard drive issue?
Has anyone had similar symptoms and how was it resolved?
Does anyone know what I can do to alleviate this issue?
I haven't had time to take it to Apple because I'm currently taking a 21 credit semester academically. I'm an art and design student so my computer is basically the bane of my existence. Help! Any constructive advice is welcomed!
Thank you so much for your input!
-Christina C.

Problem description:
The Hard Disk is failing.
EtreCheck version: 2.0.11 (98)
Report generated November 4, 2014 at 7:59:28 AM EST
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1440 x 900
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:3:43
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
HDV4 (disk0s2) / [Startup]: 749.30 GB (712.10 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.avast.userinit.plist Support
Launch Daemons: ℹ️
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[invalid?] com.perion.searchprotectd.plist Support
User Launch Agents: ℹ️
[invalid?] com.avast.home.userinit.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.jdibackup.ZipCloud.autostart.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
AdobePDFViewer: Version: 10.1.1 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Default Browser: Version: 537 - SDK 10.9
User Internet Plug-ins: ℹ️
TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
Avast Online Security
Trovi Search for Safari
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      16% mds
      7% WindowServer
      1% loginwindow
      1% fontd
      1% com.avast.daemon
Top Processes by Memory: ℹ️
120 MB com.avast.daemon
86 MB Google Chrome
52 MB Finder
52 MB WindowServer
41 MB Google Chrome Helper
Virtual Memory Information: ℹ️
13.45 GB Free RAM
1.34 GB Active RAM
944 MB Inactive RAM
1.43 GB Wired RAM
1.11 GB Page-ins
0 B Page-outs

How to : connect two routers running under another

So this issue is tricky and i have had no luck in getting this to work. Basically what i need to do, is connect "Network 2" with "Network 1" and both run off of another larger network. The Base Network is out of my control and i cannot set or change any setting within that network's routers or DHCP Servers. Thus i am forced to set routes within my routers to communicate to each other. The need for this communication is software that runs on a server within "Network 1" needs to be available to all client computers running on both "Network 1" and 'Network 2". Obviously the computers running off the same router as the server are fine. Getting the computers running off the router for "Network 2" is the tricky part. Here is a link to a diagram of the setup : http://i64.photobucket.com/albums/h176/m4x70r/networkquery.jpg Some of the things i have tried are setting the DMZ on "Network 1" to point at the server. Setting routes in both to point at the other. Setting the Gateway in "Network 2" router to point at the WAN address of "Network 1" and setting the DNS of "Network 2" to the WAN of "Network 1". No matter what i do, the laptops inside "Network 2" cannot ping the laptops in "Network 1" or even ping the router for "Network 1". However, when pinging the name of the server, it does show the IP addy i gave it, so it sees it in some small fashion but cannot link to it. I'm stumped. Time to get a networking cert i suppose. Any help or suggestions would be much appreciated!

First you have missed to mentioned the most important thing for your setup: are those two routers running in gateway mode or router mode?
It is also quite confusing which routes you tried to set exactly. (in particular why you mentioned the DNS server?). Please simply post the exact settings of the routes you have entered on either routers.
As you have mentioned that you have no control over the main network I guess your routers operate in gateway mode. In that case they do NAT - network address translation. NAT shares a single public IP address with multiple computers with private IP addresses inside the LAN. NAT makes computers in the LAN inaccessible from the outside unless you have configured an explicit port forwarding or DMZ host.
Moreover, with NAT you cannot access the computers inside the LAN on an inside IP address. This is impossible because the private IP addresses inside the LAN are not visible on the outside. You can only access any computer on the WAN IP address of the router. You cannot ping any computer inside the LAN behind the router with NAT. UDP or TCP access is limited to what you forward. The DMZ host is the "default" forward which gets all ports which are not forwarded otherwise.
If both routers are in gateway mode you don't have to define any routes on the routers as the destination subnet is not accessible. To make your server accessible you have to define port forwardings to your server on 192.168.1.2 or put it into the DMZ. You can then access the server the external IP address of the router, i.e. 10.7.2.101. The router forwards incoming traffic on that address to your server at 192.168.1.2.

I got an 15 dollar iTunes card for Christmas. I took a picture of the card code to redem the card I accomplished that but when I try to download an app that cost money it asks me two security questions that I forgot the awnsers to.what do I do?

I got an 15 dollar iTunes card for Christmas. I took a picture of the card code to redem the card I accomplished that but when I try to download an app that cost money it asks me two security questions that I forgot the awnsers to. Than I click the forgot security questions than it sends it to my email but that's the problem I do not get any email.

You need to ask Apple to reset your security questions; ways of doing so include clicking here and picking a method for your country, and filling out and submitting this form.
(96048)

HT204053 If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

Each user account may have its own Apple ID.

How can I set up my Mac for two users to share photos, music etc

How can I set up my Mac for two users to share photos, music etc?

On the Mac with the libraries you want to share:
iTunes Preferences click on the Sharing tab and put a tick in 'Share by library on local network'.
iPhoto Preferences click on Sharing and put a tick against 'Share my photos'.
When launching the same apps on other Macs on the network the libraries should be available, listed on the left.

Mac PC two routers question

Similar Messages

Maybe you are looking for