Mac plugin, 32 and 64 bit needed? or just 64 bit?

Hi All
I'm currently developing our plug-in for the Intel Mac. I'm primarily a Windows developer, so I'm not too familar with the Mac.
Will we need to make both a 32 and 64 bit plugin for OS X? From what I can tell, OS X Lion onwards is 64 bit only, but Snow Leopard and below are 32/64 bit.
Is Photoshop on Intel Mac 64 bit only, or was there a 32 bit version as well that we need to cater for (that ran on Intel Mac). I can't find those details.
Thanks
Jamie

Think I've found the answer.
For Intel Mac OS X:
>= 10.7 Lion, 64 bit only
< 10.7 Lion, 32 and 64 bit
For Photoshop
>= CS6, 64 bit only
< CS6, 32 and 64 bit

Similar Messages

HT201364 I bought my Mac in 2012 and do I need to upgrade and why it is not auto upgrading

Hi All
I bought my Mac in 201 and do I need to upgrade my OS to Maverick
Please also let me know why this upgradation is not taking place and keep on telling check your internet connection. Is there any technicalities involved

do I need to upgrade my OS to Maverick
Only if you want to.
Have you tried to download Mavericks from the App Store? If so, what happens when you try?

I just bought a mac book pro and seem to need a flash player. what should i do?

i just bought a mac book pro and seem to need a flash player. what should i do?

Welcome to the Apple Support Communities
Flash Player isn't installed in OS X by default, so you have to install it manually from Adobe wesbite, if you need it > http://get.adobe.com/flashplayer

Early Mac Pro EFI and 64 bit Question

I have an early Mac Pro 2006 and have been unable to successfully install Windows 7 64 bit due to EFI incompatibility (after installation was able to boot to safe mode but unable to otherwise boot; device manager shows that MacPro incompatible).
My question is why Apple has not provided a firmware update for the early MacPros that includes the newer EFI version present in current generation MacPros??

Let's see, different motherboard and you don't think that matters? the front side bus and memory operate differently, the PCI slots are configured different.
You can't just "update" firmware to cross those bridges. And I'm sure there is even more involved between EFI32 and UEFI 2.x (EFI64).
Vista SP1 wasn't out in 2006, and UEFI wasn't finalized and supported yet.
Apple never provided 64-bit drivers for Windows on the 1st generation Mac Pro, and none of the iMac series has had UEFI or 64-bit endorsements.
You figured out how to install Windows 7 from inside Vista, and probably how to get Boot Camp 64-bit. All you probably need is a small Vista or Windows 7 32-bit system partition to carry you forward.

I'm having sever latency issues on Logic 9 through the built-in input (despite having no plugins active and 32 bit buffer size selected)

I'm literally running a guitar straight into my computer (no plugins, no interface, just the "built-in input" on my macbook) and there's a LOT of latency. I'm very experienced with Logic and pro-audio (I have logic on my other computer and it works fine) but for some reason there's a ton of delay on my signal. NO idea where to start with this one. I've examined every option within Logic and nothing seems to be helping. I've changed every parameter, including buffer size, disabling and reenabling core audio, and low-latency mode, but nothing has worked.
Any advice would be appreciated, thanks.
Also, I'm using a late 2011 15" Macbook (Quad core, 4 GB ram)

Never heard of this before... what are you using for output in Logic's Audio Prefs?
Are you on 10.7.5 as you signature says? There is a supplemental update for early builds of 10.7.5 that were released.
Take a look at the Audio portion the "Audio-MIDI Setup" in Utilities.
Bit-depth, sample frequency? Try it at 16-bit 44.1kHz. Is Logic set to the same?
What kind of cable are you using to get the guitar into Logic, the Mac audio input jack is multifunction, could you be partially enabling the digital I/O.
just tossing some ideas..

I have a mac 10.4 and won't start up, just a blank screen with the restricted icon appears

Last night I forced shut down on the computer because the colro wheel wouldn't let me do anything.
In the morning i turned it on normally from the power button and it never started up.
Just a blank screen, forever...
I tried the safe mode and nothing happened.
Also tried holding the shift key after boot up and the apple appeared, then the RESTRICTED ICON.
I tried holding the option key and nothing either.
Tries command, option +P+R and I got the same restricted icon!!!
I can't remember when it appeared the march kernel erro in a black screen and then nothing...
I don't have the installation cd.
What can I do now?
Whatever I do I get the restricted icon.
I am at my witts end...
I know is an old mac, but can't afford a new one..and I have al of my work info and files there!
(most was backed up though!...phew...)
THANKS IN ADVANCE FOR YOUR HELP..

Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214

I'm trying to download sheet music and need to run libellous scorch add-on in 32 bit model. I have a mac running lion and the latest safari. I have downloaded FireFox 6 and run it in 32 bit but still I can't see the music score to print. Can anyone help?

I'm trying to download sheet music and need to run sibelius scorch add-on in 32 bit model. I have a mac running lion and the latest safari. I have downloaded FireFox 6 and run it in 32 bit but still I can't see the music score to print. Can anyone help?

Hello,
There are no files like that in that folder (com.apple.safari). They all have long numbers with .jpeg or .png at the end. That's what I meant by I cannot find any files like those mentioned in all the helps I read today. BTW-it's still crashing - no particular pattern to it at all.
The only two things I have downloaded recently is a new version of Flash and a Mac-driven update to Office.
Thank you very much for your attempt to help us.
J.

I have a Mac os x 10.7.4 which has Java 32 and 64 bit installed. Am unable to deposit to bank online getting a message stating I need Java 32 bit for Mac, confused???

I just got a MAC OS X 10.7.4 which has Java 32 and 64 bit installed. Am unable to make deposits on line. I get a msg stating it appears I am using 64 bit java and I need 32 bit java for MAC. I have changed order of java in preferences but it does not make a difference. Suggestions?

MadMAC0 posted at https://discussions.apple.com/message/20107182?ac_cid=tw123456#20107182 that:
Apple has posted (10/22/12) the approved solution for restoring the Java 6 plug-in:
Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality.

Can't network Mac with W7 Ultimate 64 bit (but W7Pro32 and WXP work)

Hi all,
I posted a long (probably too long) issue recently but despite nearly 200 people viewing it, no-one offered a solution. So I am re-posting a shorter, clearer statement here but below I also enclose the long full diagnostic information (at the bottom).
At home we have 4 computers: a Macbook Pro with OS X 10.7, a Windows XP desktop machine, a Windows 7 Professional 32-bit laptop, and a Windows 7 Ultimate 64-bit workstation. As a result of my extensive experimentation and testing I found that:
- Networking and sharing drives between the Macbook and the XP machine worked fine in both directions
- Ditto for the Windows 7 Professional 32-bit laptop - everything "just worked" exactly as it should
- However the Windows 7 Ultimate 64-bit machine simply would not work from the Mac to the PC (I was however able to access the PC from the Mac)
- All PCs were of course able to inter-operate in both directions across the network with each other
My conclusion therefore is that the Mac is set up and working correctly, there are no connectivity problems, and almost certainly this is an issue relating either to 64-bit W7 (versus 32-bit) or it's an issue relating to "Ultimate" versus "Professional" (or both). I have not 'fiddled' with anything, the only setting changes made which could be considered low-level were the 'secpol' change on the W7x64 machine which I read in many posts might solve the issue (it didn't).
I am not a technical expert although I have some ancient history in the field. I just want it to work. Everything I read tells me that it should - now Windows and Mac both use SMB, etc etc. But it doesnt.
Absolutely desperate to get this solved quickly now. I would even happily have paid someone, but finding an expert in Switzerland who can come to the house, speak English fluently plus (of course) be fluent in Windows 7 Ultimate x64 and Mac... it's proved to be a test too far. So if anyone out there can help... thank you in advance.
Alastair
ORIGINAL DIAGNOSTIC DETAILS
CONCLUSIONS
There appears to be a fundamental compatibility problem between Mac OS X and Windows 7 Ultimate 64 bit.
The problem actually appears to have a degree of randomness / instability about it (see below when, during diagnostics, the workstation actually disappeared, then reappeared!).
I can only presume this issue relates in some way to the “enhancements” either related to Ultimate versus Professional, or to 64-bit versus 32-bit variants.
At the moment there is only one solution I am confident would work, which is to revert my workstation to 32-bit… however this is not an option for me as it would render around 21GB of RAM unusable and remove the whole raison-d’etre for purchasing a powerful workstation in the first place.
I am therefore stuck and in need of help!
PRECONDITIONS
In all cases I am using connectivity between three different PCs and a Macbook Pro 2.53GHz Intel Core Duo, 4GB RAM, Mac OS X running version 10.7 (Lion). BTW I know Lion is new but it was exactly the same with 10.6.
I have three PCs: an XP Pro machine, a W7 Pro 32bit machine and a W7 Ult 64bit machine.
All three PCs are running the same antivirus and firewall (Norton Internet Security 2011), this was left ON for all tests on all machines.
I have already been through all the myriad of advise on this subject: as you can see from the below, file sharing etc has all been enabled. The “secpol” changes etc have also been made on the W7 Ult 64bit machine only (but these were only made because it didn’t work without the changes and everyone seemed to think this was needed).
All my Windows computers are configured to workgroup “WILF” and also set this Workgroup name on the Mac in the WINS settings dialogue. No homegroup exists on the network.
No other “tinkering” has taken place. Although I have some tech skills, I am just a bloke who wants to use his computers, not a computer genius. As such the Tosh laptop is pretty much fresh out of the box, the Mac has nothing non-standard and the only setting change is the WINS setting for the Workgroup name. The workstation is a little over a year old so but I have not poked around with anything deep inside it, so if there is anything wrong it should be superficial – the kind of thing a basic user could have changed by mistake and can easily be changed back.
DIAGNOSTIC TESTS
Connecting between Macbook and old Windows XP machine (XP Pro 2002 SP3):
-        Open ‘Finder’ on Mac, PC immediately visible under ‘Shared’.
-        From Mac: Single click on PC icon indicated “Connecting” then “Connect as Guest”, opens a list of all shared and public folders. Am able to copy files from Mac to PC, am able to copy files from PC to Mac.
-        From PC: Opening “My Network Places” and clicking on “View Workgroup Computers” shows all my networked computers including the Mac, double-clicking the Macbook icon opens a list of all shared and public folders. Am able to copy files from Mac to PC, am able to copy files from PC to Mac.
-        In short: this appears to work as it should.
Connecting between Macbook and new Windows 7 machine (W7 Pro 32-bit 2009 edition, Tosh laptop w/ Intel Core i7 M620 @ 2.67GHz, 4GB RAM):
-        Open ‘Finder’ on Mac, PC immediately visible under ‘Shared’.
-        From Mac: Single click on PC icon indicated “Connecting” then “Connect as Guest”, opens a list of all shared and public folders. Am able to copy files from Mac to PC, am able to copy files from PC to Mac.
-        From PC: Opening “Windows Explorer” and single-clicking on “Network” shows all my networked computers including the Mac. This time I decided to try logging into the Mac drives as me, rather than as a guest:
Double-clicking the Mac icon opens up the ID / Password dialogue box.
Inputting my correct username and password for the Mac immediately opened up all the folders on the Mac I have access to (the shared / public folders but also the folders for my login account on the Mac).
Am able to copy files from Mac to PC, am able to copy files from PC to Mac.
-        In short: this appears to work as it should.
Connecting between Macbook and fairly new Windows 7 workstation (W7 Ultimate 64-bit 2009 edition SP1, Supermicro workstation w/ 2 x Intel Xeon W5590 @ 3.33GHz, 24GB RAM):
-        Open ‘Finder’ on Mac, PC WAS INITALLY immediately visible under ‘Shared’… however while carrying out the testing for the XP machine and the laptop, it has disappeared! The other two machines remain visible.
STOP PRESS: It reappeared… for how long, is anyone’s guess…
-        From Mac: A single click on PC icon almost instantaneously indicates “Connection Failed”. Repeated attempts produce the exact same result. To verify the basics some elementary diagnostics:
Mac IP address 192.168.0.11 can be successfully pinged from the PC.
PC IP address 192.168.0.3 can be successfully pinged from the Mac.
From PC entering comment “ping MACBOOKPRO-598A” (the latter being the computer name of my Macbook) works successfully i.e. name resolved OK, no packet loss, 1ms round trip.
From Mac unable to run the reciprocal ping test for EITHER PC since I don’t know what to put into Ping to allow it to resolve the computer names.
However I note that all 3 Windows machines remain visible in the Finder, only the two which work (the XP machine and the W7 32bit laptop) have the “Eject” symbol next to them and they are still the only two which work both ways without problem.
In the Finder window after clicking on the PC icon in the left column, I get another instance of this icon in the next column with “Connect As” underneath and presently “Connection Failed”. If I click on “Connect As” I receive the error “There was a problem connecting to the server ‘alastair-ws’ (which is the PC name of the workstation).
Finally if I use the GO -> Connect to Server option in Finder, using SMB://alastair-ws I receive the same error as above. I get EXACTLY the same error if I use the IP address of the workstation 192.168.0.3 as above.
-        From PC: Opening “Windows Explorer” and single-clicking on “Network” shows all my networked computers including the Mac. Again I decided to try logging into the Mac drives as me, rather than as a guest:
Double-clicking the Mac icon opens up the ID / Password dialogue box.
Inputting my correct username and password for the Mac immediately opened up all the folders on the Mac I have access to (the shared / public folders but also the folders for my login account on the Mac).
Am able to copy files from Mac to PC, although naturally not the other way around.
-        Therefore the PC-to-Mac seems to work OK, but the Mac-to-PC does not no matter what I try, although the IP is visible and it’s clear the connectivity exists (or Mac copy onto PC would also not work).
[END]

You can give this a try on your Ultimate machine. While these are said to be for Vista, I used it on my Win 7 machine just fine and it fixed the problems I was having. Hope it works for you.
The problem is that Vista, by default, will only use NTLMv2 for authentication, which is not supported by Mac OS X's Windows Sharing service.
The other problem is the Minimum Session Security for NTVLM SSP based Clients.
To get around this:
1.     In Vista, open the Control Panel
2.     Switch to "Classic" view
3.     Double-click Administration Tools
4.     Double-click Local Security Policy
5.     Or Secpol.msc
6.     Expand "Local Policies" and select "Security Options"
7.     Alternate : Type secpol.msc to get editor up then
8.     Locate "Network Security: LAN Manager Authentication Level" in the list and double-click it.
9.     Change the setting from "Send NTMLv2 response only" to "Send LM & NTLM - use NTLMv2 session if negotiated"
10.     Network Security: Minimum session security for NTLM SSP Based (including secure RPC) Clients
11.     Change the setting from "require 128 bit" to unchecked (No Minimum)
12.     Click OK
the real difference between vista and windows 7 procedure is 10 and 11

My Mac is getting slower and slower, I need to restart it constantly.

I mostly use it just to browser the internet, watch movies and listen to music, but recently I have notice that I have to restart it at least once a day to keep the software working nicely with out any lags. Any tips or suggestions? I don't think I need any hardware update.
Cheers!

Problem description:
Computer getting slower, need to restart it constantly.
EtreCheck version: 2.1.8 (121)
Report generated March 22, 2015 at 17:52:54 CST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (Retina, Mid 2012) (Verified)
    MacBook Pro - model: MacBookPro10,1
    1 2.3 GHz Intel Core i7 CPU: 4-core
    8 GB RAM Not upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 144
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD spdisplays_2880x1800Retina
    NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:55:13
Disk Information: ℹ️
    APPLE SSD SM256E disk0 : (251 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 249.80 GB (114.63 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Configuration files: ℹ️
    /etc/hosts - Count: 11
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/VyprVPN.app
    [loaded]    foo.tap (1.0) [Click for support]
    [loaded]    foo.tun (1.0) [Click for support]
        /Library/Application Support/Norton Hotspot Privacy
    [not loaded]    com.symantec.tun (1.0.1) [Click for support]
        /Library/Extensions
    [loaded]    at.obdev.nke.LittleSnitch (4234 - SDK 10.8) [Click for support]
    [loaded]    com.karios.driver.DuetDisplay (1 - SDK 10.10) [Click for support]
    [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
    [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Click for support]
    [not loaded]    com.elgato.driver.DontMatchAfaTech (1.1) [Click for support]
    [not loaded]    com.elgato.driver.DontMatchCinergy450 (1.1) [Click for support]
    [not loaded]    com.elgato.driver.DontMatchCinergyXS (1.1) [Click for support]
    [not loaded]    com.elgato.driver.DontMatchEmpia (1.1) [Click for support]
    [not loaded]    com.elgato.driver.DontMatchVoyager (1.1) [Click for support]
    [loaded]    com.screenrecycler.driver.ScreenRecyclerDriver (1.4.13 - SDK 10.4) [Click for support]
Launch Agents: ℹ️
    [running]    at.obdev.LittleSnitchUIAgent.plist [Click for support]
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.sophos.uiserver.plist [Click for support]
    [running]    net.culater.SIMBL.Agent.plist [Click for support]
Launch Daemons: ℹ️
    [running]    at.obdev.littlesnitchd.plist [Click for support]
    [running]    com.adobe.adobeupdatedaemon.plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.ea.origin.ESHelper.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [running]    com.sophos.common.servicemanager.plist [Click for support]
    [loaded]    com.symantec.ajaxserver.plist [Click for support]
    [loaded]    com.tunnelbear.mac.tbeard.plist [Click for support]
    [running]    vyprvpnservice.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.nds.pcshow.plist [Click for support]
    [loaded]    com.nds.pcshow.uninstall.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
    [loaded]    com.valvesoftware.steamclean.plist [Click for support]
    [loaded]    net.infinite-labs.SIMBLEnablerForSandboxedApps.plist [Click for support]
User Login Items: ℹ️
    duet    Application (/Applications/duet.app)
    Flux    Application (/Users/[redacted]/Applications/Flux.app)
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Dump Truck    Application (/Applications/Dump Truck.app)
    EyeTV Helper    Application (/Library/Application Support/EyeTV/EyeTV Helper.app)
    VyprVPN    Application (/Applications/VyprVPN.app)
Internet Plug-ins: ℹ️
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Click for support]
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    PepperFlashPlayer: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
    1Password
    Adblock Plus
    Disconnect
    Reddit Enhancement Suite
    Save to Pocket
Audio Plug-ins: ℹ️
    DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 249.80 GB Disk used: 135.17 GB
    Destinations:
        LaCie [Local]
        Total size: 2.00 TB
        Total number of backups: 29
        Oldest backup: 2015-01-07 06:26:03 +0000
        Last backup: 2015-03-22 04:27:28 +0000
        Size of backup disk: Excellent
            Backup size 2.00 TB > (Disk size 249.80 GB X 3)
Top Processes by CPU: ℹ️
        23%    WindowServer
        13%    Safari
         3%    parentalcontrolsd
         2%    Little Snitch Agent
         1%    pbs
Top Processes by Memory: ℹ️
    426 MB    Safari
    222 MB    com.apple.WebKit.WebContent
    189 MB    SophosScanD
    180 MB    InterCheck
    155 MB    SophosAntiVirus
Virtual Memory Information: ℹ️
    105 MB    Free RAM
    3.62 GB    Active RAM
    3.53 GB    Inactive RAM
    1.22 GB    Wired RAM
    2.71 GB    Page-ins
    2 MB    Page-outs
Diagnostics Information: ℹ️
    Mar 22, 2015, 04:56:56 PM    /Library/Logs/DiagnosticReports/vyprvpnservice_2015-03-22-165656_[redacted].cra sh
    Mar 22, 2015, 04:56:42 PM    Self test - passed
    Mar 21, 2015, 08:38:01 PM    /Library/Logs/DiagnosticReports/vyprvpnservice_2015-03-21-203801_[redacted].cra sh
    Mar 20, 2015, 08:43:24 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/OriginClient_2015-03-20-204324 _[redacted].crash
    Mar 20, 2015, 07:16:02 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/SIMBL Agent_2015-03-20-191602_[redacted].crash
    Mar 20, 2015, 07:12:03 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/OriginClient_2015-03-20-191203 _[redacted].crash
    Mar 20, 2015, 07:09:22 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/SIMBL Agent_2015-03-20-190922_[redacted].crash
    Mar 20, 2015, 12:58:55 PM    /Library/Logs/DiagnosticReports/openvpn_2015-03-20-125855_[redacted].crash
    Mar 19, 2015, 07:51:00 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/PopcornTime_2015-03-19-195100_ [redacted].crash
    Mar 19, 2015, 07:50:46 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/PopcornTime_2015-03-19-195046_ [redacted].crash
    Mar 19, 2015, 07:49:34 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/PopcornTime_2015-03-19-194934_ [redacted].crash

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Thanks for prompt reply, yes we have tried that but have now closed down the browser we where the photos were.
We haven't sent up time machine, do you know whether there is any roll-back function on a Mac?
Thanks

HT3986 I've had MS Office:mac 2011 on my imac for around 18 months now. Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it. I've just done this using the installation dis

I've had MS Office:mac 2011 on my imac for around 18 months now. Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it. I've just done this using the installation disc which, then said the installation had been successful.
Outlook is still not working. Can anyone please advise me on what to do next.

Remove MS Office 2011 completely (here are instructions) and reinstall it.
It's not a simple or fast process but it is important to follow all of the steps in order to get all the files that Office scatters around. This will not affect your data files, only MS Office and its preferences.

I have OS 10.8.2 and use wireless at home just fine. When I visit a friend with only a cable modem internet my Mac Book Pro will not connect. What do I need to do?

I have OS 10.8.2 and use wireless at home just fine.
When I visit a friend with only a cable modem internet my Mac Book Pro will not connect.
I see that the Mac Book Pro is picking up the internet when I check the internet preference section but it will not open Safari.
What do I need to do connect via a cable modem?

You need to power off the modem for 15-30 seconds, then power back up and then connect. The modem is remembering the last connection (your friend).

My daughter's ipod is not working and says it needs to be plugged into a computer. Can she sync to someone elses mac?

My daughter is away at camp and ipod is not working and says it needs to be connected to itunes. She does not have her laptop with her. Can she sync to her itunes on someone else's mac?

Yes, when she plugs it in to another person's mac, tell it transfer purchases, then authorize the computer by going to store, and click authroize computer. If the iPod is in recovery mode
Then I don't think she can have her music apps etc. on there after she plugs it into the computer. If it just needs a charge
When iTunes opens on the computer, quit it, and do not let the iPod sync with the computer, just answer no or ignore to any questions asking if you want to sync.

HT4818 hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx

hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
Sebastian

hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
Sebastian

Mac plugin, 32 and 64 bit needed? or just 64 bit?

Similar Messages

Maybe you are looking for