Mac Printer Driver for IKON Business Pro 500 c

I have a PowerPC G4 running OS 10.3.9. I work in an office that has a networked IKON Business Pro 500c multifunction printer. Anyone know where I can locate a printer driver for that printer so that I can access the printer features from my Mac ? I currently access it as a generic postscript printer but I want to do double-sided printing which is greyed out when I access it as a generic postscript printer.
PowerPC G4 Mac OS X (10.3.x)

The Mac OS X 10.5 discussions are not the place to post a Mac OS X 10.3 issue? Let me redirect you to: http://discussions.apple.com/forum.jspa?forumID=746. That is the 10.3 Printing discussion.

Similar Messages

  • Mac printer driver for IKON Business Pro 500c

    I have a PowerPC G4 running OS 10.3.9. I work in an office that has a networked IKON Business Pro 500c multifunction printer. Anyone know where I can locate a printer driver for that printer so that I can access the printer features from my Mac ? I currently access it as a generic postscript printer but I want to do double-sided printing which is greyed out when I access it as a generic postscript printer.

    The Mac OS X 10.5 discussions are not the place to post a Mac OS X 10.3 issue? Let me redirect you to: http://discussions.apple.com/forum.jspa?forumID=746. That is the 10.3 Printing discussion.

  • Where can I find a Mac printer driver for the HP LaserJet 1536

    Where can I find a Mac printer driver for the HP Laser Jet 1536dnf MFP

    Hello, Mario here. All drivers available for this printer are located here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3974279&lc=en&cc=us& dlc=en&lang=en&cc=us
    Select your operating system and you will be able to see what drivers are available. Let me know if you have any other questions.
    I work on behalf of HP

  • Installing most recent print driver for Epson Pro 3800

    I like to make sure that I use the most recent print driver for my Epson Pro 3800.
    So I downloaded the driver "epson 328233 eu.dmg" and it shows up in "Finder downloads"
    * I assume that this driver is the most recent one?
    I have no idea how to continue to replace the existing driver and how to install the latest driver?
    * Do I have to remove the present driver? If so: how do I find the old driver and how do I remove this driver?
    * Thereafter in what way do I install the new driver?
    I am far from a software specialist and I recently switched from PC to iMac which is still troubling me!
    Thank you for helping me!
    Harry

    Dear Sig,
    Thank you for your answer which solved my problem.
    I had the imprerssion that in Mac some downloads are installed automatically and some are not?
    But this might be a wrong observation and is installing always necessary?
    Harry

  • Printer Driver for Laserwriter 320

    I need to load the printer driver for my Laserwriter 320 on my iBook, which I just upgraded to OS 10.4. However, the install disk did not have any Apple printer drivers on it, contrary to reports stating that they were on the disk.
    I have tried third party sites to find the printer driver download but only the driver for Windows machines can be found.
    Does anyone have or know of a source that has the Mac printer driver for Laserwriter 320?
    Thanks,
    Greg Linn

    Hi.
    The driver for the Personal LaserWriter 320 is already installed by default, since it's part of the Essential System Software. If you want to check it, just go to System/Library/Printers/PPDs/Contents/Resources/en.lproj, and you'll find the "l LaserWriter Personal 320.gz".
    If I recall correctly, in order to make that legacy printer work with OS X, you need an Ethernet to LocalTalk Adatper, like the AsanteTalk, or similar.
    Good Luck.

  • Print Driver for HP 720C - for my eMac

    I am trying to install my old HP 720C printer onto my eMac while I send my Epson back to be serviced. I can't find a Mac print driver for the printer and my attempts to download the linux solution have to this point been unsuccessful. My computer doesn't recognize that there is any new print drivers installed.

    DGAAA wrote:
    When I select the printer, the add button doesn't turn blue - it doesn't do anything when I click it.
    Is the name of the printer appearing at the bottom of the list when you select Advanced? After you select the printer, what is filled in for the *Printer Name* and *Device URI*?
    You might also want to try using the alternative communications software for USB printers called 'usbtb'. You can download it from http://buymelunch.org/printing/usbtb/ This software will often times work better with parallel to USB adapters than the standard Apple supplied software.
    Matt

  • HT3669 Latest Mac OS Update Driver for Canon 9500 Pro causes text lines all to be printed over the first letter of the line?

    Anyone know how I can 'fix' the Mac OS printer driver for the Canon 9500 Pro - all my text lines end up with the whole line being printed over the first character of the line of text when printing PDFs. It has ruined a lot of work.

    I'd try this:
    Delete the current printer (reset the print system) Mac OS X: How to reset the printing system
    Delete all other Canon software and utilities from your computer.
    Do a factory reset on your printer
    Use Software Update to download the driver from Apple.
    Don't reinstall any other Canon Utilities.
    Make sure you don't have something mechanical stopping the paper from advancing.
    If the problem is really the driver, then you could look in Gutenprint for a different driver. Gutenprint for Mac OS X

  • Mac Lion OS print driver for hp color laser jet 1600 & business inkjet 2200

    I just brought a Macbook Air (13in) with the new OS Lion.  I however have a HP Color Laserjet 1600 and Business Inkjet 2200 that I love, but can't find a printer driver for either.  So, my questions are, does anyone know if:
    1)  there is going to be a mac lion os print driver for hp color laser jet 1600 & Business Inkjet 2200; or
    2)  is there another way to print to them (i.e., the 2200 uses HPA instead of PS and the 1600 uses PCL)?

    Any suggestions re correct driver for windows 7 and HP 4600dn?

  • Mac OS 10.5 Bonjour Unable to find printer driver for P1606dn connected via wired network.

    I have been trying to connect my HP Laserjet Pro P1606dn to my PowerMac G5 running Mac OS 10.5.8.  I connected the priner to my LAN via Ethernet cables and NetGear 8-port switch.  I then successfully installed the printer driver from the supplied CD on the Mac and went to System Preferences / Print & Fax to add the printer to the list of connected printers.  Hit the "+" button.  The HP P106dn was listed in the table (Kind = Bonjour).
    I selected this entry in the table, and the dialog box immediately went into action: the "Print Using" pullodwn listed the greyed out message "Please select a driver or printer model" and a spinning wheel labeled "Searching for new drivers" appeared below it.  The dialog box searches for but never finds the printer driver (I waited 20 minutes with no success).  I have installed other HP printers this way on this machine without any problem, e.g., HP Color Laserjet 2605dn.  Why is this method not working with this printer?
    I was able to connect this printer with other (Intel) Macs in my household via this LAN arrangement.  Is the printer driver for Intel-only Macs?
    I disconnecting the printer from the LAN and connected it directly to my Mac with a USB cable.  Followed the same process, and I was able to connect to this printer.  Successfully printed a document page.  While this provides me with a work-around for the G5 Mac, I need to share this printer with the other Macs in my household.
    I went to the HP download site and downloaded the latest driver for this printer, re-installed the printer driver on the Mac, and repeated the steps for the LAN arrangement (above) to complete the connection via the Print & Fax dialog.  The result was the same: spinning wheel searching for a printer driver that it cannot find.
    I do not know what else to do, or why this installation will not work.  I would appreciate it very much if anyone could offer an explanation for this or some suggestions as to what else can be done?
    Ed
    This question was solved.
    View Solution.

    I apologize for the delay in responding to you.  I was on the road all day yesterday.
    OK.  I switched the printer's Ethernet cable to a Linksys Switch (Model EZX S55W) that's part of this local network.  That did not work.  I swapped out the cable for one that I know works.  Still no change.  I switched the printer's Ethernet cable directly to a port on the router.  No change.  I even swapped cables here, too, but no success.
    As I was doing all this, I was wondering: When I select the HP P1606dn printer in the Print and Fax "Add" dialog box, (see the image below) and the Print Using pulldown menu displays "Please select a driver or printer model" and the message "Searching for new drivers" appears under it (with the spinning wheel), why is it that the Ethernet connection to printer is critical to "finding" a new (printer) driver?
    Isn't the utility searching through my system and libraries looking for a printer driver app for the printer that I identified/selected in the dialog box?  
    After all, if the dialog box lists the printer among those to choose from, hasn't the utility already discovered the printer via the Ethernet connection?

  • HP Laserjet 4 printer driver for mac osx 10.8.5

    Anybody know of a mac osx 10.8.5 printer driver for a HP Laserjet 4?

    Yeah, looked at this list earlier - they've got v. 19.8 for a Laserjet 4 Plus but mine is a plain Laserjet 4 so I doubt it would work. I used a Gutenprint driver v. 5.2.3 with Leopard that worked OK. Mountain Lion doesn't seem to like it as much...

  • I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro.  Does anyone know how to do this?

    I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro.  Does anyone know how to do this?

    1. Remove the drives, install them in external enclosures.
    2. Use a Firewire cable to connect to your computer. Boot the mini into Target Disk Mode - Transferring files between two computers using FireWire

  • Where can I find a print driver for my e-mac running os9.2

    Where can I find a print driver for my e-mac running os9.2

    Actually the best place is the web site for the printer. You'll also need the model, but there are still some OS9 drivers out there.
    You must supply the printer make and model for people here to help further.

  • What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?

    What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?

    I agree with teh OWC sggestion above, but why must it be USB powered? I find that far more unreliable, and the low power devices slow.
    I'd frankly get a good external enclosure and buy a bare drive.  But the OWC stuff is quite good - vastly better than some of the majors (WD being aprime example of stuff that's boderline quality and often not compatible)
    Grant

  • Help finding hp laserjet 1000 print driver for mac ox s 10.7.5 lion

    Any idea where I can find a print driver for an hp laserjet 1000 for my macbook pro OX S 10.7.5 lion? 

    Thanks for your response, this is what my printing options are:
    And here's what my Color Matching options are:
    I cannot find an option to change the ink cartridge in any of the other categories. Any suggestions?
    Thanks!

  • Samsung ML-1450 Printer Driver for Mac OS 10.5.4

    Hello!
    I would like to get Samsung ML-1450 Printer Driver for Mac OS 10.5.4. The old driver does not work with 10.5.4, Any help would be appreciated!
    Thanks.
    SMalkan

    http://www.samsung.com/us/support/download/supportDownDetail.do?group=&type=&sub type=&modelnm=ML-1450&language=&cate_type=all&mType=DR&dType=D&vType=L&cttID=213933&prd_ia_ cd=&dispnm=ML-1450
    It says it's for 10.2.4 or later or 10.4 (Huh?) but I just tried it and it worked.
    I printed through an Airport Extreme Base Station, but I imagine it should work via USB (or ethernet).

Maybe you are looking for

  • Calling a stored procedure from within a ViewObject

    Is it possible to make stored procedure call from within a BC4J ViewObject? Basically something like this: select * from table(f1(3)); where f1 is a table function. Using Oracle's pipelined table functions? If not, is it possible to call a stored pro

  • I can't find video out on my iphone 3gs

    I bought an apple component cable for my iphone 3gs and/or 4th generation itouch.  But even when the cable is plugged in I can't find the video out setting. I realize that since the new update to 5, this setting is in a different location (under gene

  • Oracle 10g Enterprise Manager

    I recently upgraded one of my production databases to Oracle 10g from 9i. Everything was working perfectly. Now when I try to launch Enterprise manager I get "Server Error: Can't connect because of networking problems". I tried to stop and start the

  • Problems with mount and unmount of network shares

    Hi, I use an Apple script to mount four network shares during startup of an OS 10.4.4 Powerbook. Unfortunately it seems that Tiger can't always mount them all. Sometimes it only mounts three of them, but pressing Command + K indicates that the fourth

  • Iphone corrupt photos unknown format

    I took some photos at an event and cannot import them into iPhoto - unknown file type.  I also tried emailing them to myself and no file shows up with the email. Also the photos are still there on my camera roll but are not in focus - they were in fo