Mac Printing with a printer server and Windows XP desktop

I have the following configuration:
Dell Desktop running XP
Apple iBook G4 running 10.4
Linksys Router
Linksys Print Server
I can't get my iBook to print through the print server. I have tried IP Printing and provided the printer server IP Address and correct printer driver "HP LaserJet 1012 Foomatic/hpijs (which I think is now part of 10.4). When I try to print I get the following message, "Printer Busy; will retry in 10 sec. I have also had Connecting to 192.168.1.78 on port 630... and nothing happens.
Any suggestions? I am at wits end because nothing is working. I know that my wireless router and print server are working because I ping'd them from the PC.
Any help would be greatly appreciated.

On windows, the setup software fills in required info like print server queue name - but we don't have that software on the Mac.
Look in the print server manual and check the supported protocols - LPD and IPP require a queue name which you can find in the manual. HP Jetdirect protocol doesn't need a queue name, and is called TCP/IP raw or socket 9100 printing in some manuals.
Good luck.

Similar Messages

  • How to access a printer on a networkwit​h a Linux server and Windows client.

    Windows can't find a driver on the network. To locate one manually. click OK. Otherwise click Cancel...
    This question was solved.
    View Solution.

    I posted additional information  online using the newly created Launchpad login Service account.
    I hope that explains my situation, if not I will add more detail here.
    There is no problem, when ither of the two OS are used to enable printing with the HP Deskjet 2050 J510 series printer.
    The problem begins when I try to print from the other OS , when connected to one of the Operating System.
    I have tried without success to print from Windows 7 Ultimate 64-bit OS from an HP Deskjet 2050 J510 series connected to a Ubuntu 12.04 LTS server with Amahi (HDA), installed.
    The same thing occurred when I tried to print from the Ubuntu server and the printer was connected to the Windows 7 Ultimate 64-bit running P.C.

  • I am informed by FF that there are updates. When I click on them the window just says it's trying to connect to the server and never does. I have a Mac Powerbook with 10.4.11 and FF 3.6.13

    # Question
    I am informed by FF that there are updates. When I click on them the window just says it's trying to connect to the server and never does. I am never able to update and I believe FF is now up to 3.6.17.
    I have a Mac Powerbook with 10.4.11 and FF 3.6.13.
    Joel E. Pittenger cell: 314-724-8820

    That is because that Firefox 3.6.x version has been released later than the Firefox 4 version.
    If you have problems with updating then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

    I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions?  Please??? :-)

    Hi Kelly,
    As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
    I would suggest that you troubleshoot using the steps in this article -
    OS X Yosemite: Printing troubleshooting
    Start with the section titled Check the network.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Mac OS X 10.5.7 as VNC server and Windows as VNC server

    Hi,
    I try to enable screen sharing from Mac OS X as VNC server and we would like to use a Windows client as VNC client.
    I try to anable it from system pref., set the password, ecc.
    When I insert VNC password from Windows, VNC send me this message.
    read: Connection aborted (10053)
    Have you got any advice?
    If I use Windows as VNC server and Mac 10.5.7 as client all works fine.
    Windows Vista SP1, RealVNC VNCviewer 4.1.3 free edition.
    Thank you
    Regards.
    Ganimede Dignan.

    Re: Ganimede Dignan
    Re: justinvallon
    I have found that if a 3rd party client is not happy with the Mac OS X VNC server, then switching to the Vine Server (aka OSXvnc) often times does the job. Vine Server is a free download:
    <http://www.versiontracker.com/dyn/moreinfo/macosx/16699>

  • When printing from Preview, the document prints with large print and many lines added and pages added

    When printing from Preview, the document prints with large print and many lines added and pages added. Why does this happen?

    Thank you!!! That was the problem--scale was set at 200% (don't know why)--when I reduced it to 100% it printed perfectly.
    Thanks again for helping me resolve this problem.

  • HT5446 If I buy a mac mini with a fusion drive and add windows using boot camp, can I make the SSD function be dedicated to the windows partition?

    If I buy a mac mini with a fusion drive and add windows using boot camp, can I make the SSD function be dedicated to the windows partition?

    Additional information from Linc's post. Basically, only one additional partition can be added to a Fusion Drive and it resides on the HDD.
    Do computers that come with a Fusion Drive support Boot Camp?
    Yes. Use the Boot Camp Assistant to create a Windows partition and install Boot Camp. The Windows partition will exist on the hard disk drive, not the Flash drive, and is not part of Fusion Drive Logical Volume Group. 3TB Fusion Drive configurations need to update to OS X Mountain Lion v10.8.3 or later to install Windows 8. See iMac (27-inch, Late 2012): Boot Camp alert with 3T hard drive for more information.

  • My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

    My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
    I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
    HELP PLEASE
    Very worried!!

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • Anything printed with firefox prints too small

    anything printed with firefox prints too small. If I print and email it prints in the center top of the page and is just larger than a credit card. if I adjust the scale to 100% the it prints what could fit on one page onto 4 pages and prints a small portion in the center top of the page and is just larger than a credit card.

    Ok i think i fixed this issues.
    i went to about:config print.print_margin_bottom (and also left, right and top) and right clicked reset (it took out the previous 0.5 value). now the pages look normal on print preview without the large margin

  • Calendar Server and Windows 2000

    Hallo,
    what have I got to do to run the Sun ONE calendar together with the ldap Server of Windows 2000 Server (Active Directory)?
    When installing it says, I will have to update the directory manualy, but I do not know how to do this...
    thanks a lot
    salamander

    I have 2005Q4 calendar, communication express, 2005Q1 messaging server, and outlook connector
    I don't think that this is a supported configuration. Outlook Connector expects all the versions to match. It's not likely to work unless it finds that.

  • Does Mountain Lion come with an Apache server and if so how do I access it?

    Does Mountain Lion come with an Apache server and if so how do I access it?
    On my previous Mac there was a check box for web sharing in the Sharing System Preferences. I used this to experiment with HTML website design. How do I do this on my new Mac?

    Thanks for the reply. Others have asked similar questions. I was directed to a user tip page 
    by etresoftThat gives step by step instructions which should solve my problem.

  • I changed permission setting on main disk...took forever now when I bootup I get the chime...apple icon...fan noise...thats it...internal drive is broken...no Mac install disk..I have a windows XP desktop with installation disk..if I was to get external d

    I changed permission setting on main disk...took forever now when I bootup I get the chime...apple icon...fan noise...thats it...internal drive is broken...no Mac install disk..I have a windows XP desktop with installation disk..if I was to get external drive ...could I use windows XP styartup disk just to boot the "17"Powerbook-G4...have no intention of downloading XP on the Mac...just want to boot it up...or is there a way to boot the Mac from the XP desktop...cables...etc?

    Hi Romko23, just pasted info from manual...PowerBook G4 "17"  5.3
    Your PowerBook comes with a minimum of 512 megabytes (MB) of 533
    MHz Double Data Rate (DDR2) Synchronous Dynamic Random-Access Memory
    (SDRAM) installed. Both memory slots can accept an SDRAM module that meets the
    following specifications:
    Â Double Data Rate Small Outline Dual Inline Memory Module (DDR SO-DIMM) format
    Â 1.25 inch or smaller
    Â 512 MB or 1 gigabyte (GB)
    Â 200-pin
    Â PC2-4200 DDR2 533 MHz Type RAM
    PS my keyboad is loose...I tighten the tiny screws...only...once ...tried  all the key-strokes...Comand-option..P-R.....safe-mode... etc...Mac only reacted ...once...right after.. I tightend K-board >>C-OpT- P-R...mac chimed twice...the Apple icon in grey screen got smaller....now after trying ...keyboard .boot short cuts 10 times..nothing...it chimes ...grey screen....apple in window...fan noice ....thats it...do you think I need to tighten screws...again,
    I actually think when I was changing permissions...on entire it was taking so ong...20 min...I just hit power,,shut it down...when it wasn't done...no patience.,...just thought of something ...sounds important...whern I resgisted on this site..I tried to use my Powrbook login name ..got message.... .. blocked...Secury problem....that has to be the problem..blocked..how do I unblock?
    Message was edited by: CMK1

  • Fieldpoint Hardware Drivers that are compatible with LV 8.5 and Windows Vista

    I trying to develop in LabVIEW for some Fieldpoint hardware. I was going to download the hardware drivers from NI, but only see drivers that are compatible with Windows XP and LV 8.2
    Or, am I just misinterpreting this?
    Also, are there any potential conflicts with me developing on Vista, if my end-user, is uding another OS?
    Daddy-O
    One should welcome adversity as an opportunity to excel.

    Hi Daddy-O,
    Thank you for contacting National Instruments.  This is a little misleading, and unfortunately the driver you are looking for is currently not directly searchable.  In order to use your FieldPoint hardware with LabVIEW 8.5 and Windows Vista, you will need the FieldPoint 6.0 driver.  This can be found within the disk that is distributed with new FieldPoint hardware, and any Device Drivers CD from August 2007 forward.  Unfortunately, a standalone installer is not available for this driver, and if you do not have a hard copy of the Device Drivers, you can download this here.  From this installer, you should be able to select FieldPoint 6.0 and install this software.
    I hope this helps!  Let me know if there is anything else I can clarify.  Have a great day!
    Jason W.
    National Instruments
    Applications Engineer

  • How to have Snow Leopard, Mavericks with built-in recovery, and Windows 7 (Bootcamp) on my iMac (Intel)?

    I would like to have Snow Leopard, Mavericks with built-in recovery, and Windows 7 (Bootcamp) on my iMac (Intel).  Is this possible?  If so, how?  Currently, I have Snow Leopard and Windows 7 (Bootcamp) running on my iMac.  I have enough disk space to split my Snow Leopard partition.  I have read that if I split my Snow Leopard partition, clone my Snow Leopard partition to the new partition, and boot to the new partition, that I may have problems with the Maverick's upgrade because it may not be able to create the recovery parition, or that it may erase the Windows partition, or that it may mess up the Windows boot process.

    Simplest is to install Mavs on an ext HD, using FW or TB. I don't do windoze, so can't advise about the Boot Camp and multiple volumes issue. Since there's no Boot Camp, I have four volumes running SL through Mavs.

  • Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5  and it will not open on the iMac the only change is the my new iPhone number is  OS.  Any ideas?

    Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5  and it will not open on the iMac the only change is the new Maverick OS from the macpro Lion OS.  Any ideas?
    <Personal Information Edited by Host>

    Setup Assistant and Migration Assistant do not restore MS Windows, it only does the OS X partition. All of your Windows stuff must be backed up and restore using a MS Windows application. If no one on this forum is able to answer your question then I'd repost it on a Parallels forum to see how other Windows users approach this.

Maybe you are looking for