Mac Pro 1.1 Asks if I want to shut down after an hour or so of use.

Hi,
My Mac Pro will bring up the shut down dialogue after an hour or so of use.  The window won't cancel just reappears.
Previously it was going to sleep until I unchecked 'Allow power button to put Mac to sleep' in preferences.  Power button fault?
I've re-set my PRAM and SMC.  Changed the battery on the PCB too.
I've tried running a hardware test however I'm using a reasonable but old CRT display and the dialogue box doesnt display correctly, looks brown/orange and illegible.  I'm running Lion.
Any thoughts? Power button easy to replace? Can't find much info on doing this.
I wonder if the temperature of the mac is what triggers the fault.
Any help would be much appreciated.
Thanks,
John

Why not run AHT first and see.
I'd say heat and failing RAM would be first.
Hardware Monitor + SmcFanControl @ 900 rpm and FBDIMMs @ 70*C - those DIMMs after 5 yrs.... and Dust Vac.
2x2GB FBDIMM DDR2 667MHz
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
Hardware Monitor
http://www.bresink.com/osx/HardwareMonitor.html
UPS
http://www.amazon.com/CyberPower-CP1500PFCLCD-Compatible-1500VA-Tower/dp/B00429N 19W/
Metro Vacuum ED500 DataVac 500-Watt 0.75-HP Electric Duster 120-Voltwww.amazon.com/Metro-Vacuum-ED500-500-Watt-Electric/dp/B001J4ZOAW/

Similar Messages

  • My macbook keeps asking if I want to shut down, restart, etc...

    It just started, but my macbook keeps asking if I want to shut down, restart, etc...
    I've tried all the resetting advice I see online but nothing works...
    I have a macbook 2.1/Intel Core Duo - 4GB - 10.6.8

    My MacBook just recently today starts to ask me to shutdown/sleep/restart etc after 1 minute of idling. I've reset the SMC twice to no avail. I checked my power settings and everything else and nothing is out of the ordinary. I've looked online and other people have experienced similar problems. Just wondering if anyone have found a solution to this?

  • Mac Pro during start up, chimes, apple logo then shuts down.  Just began

    My Mac Pro (with Cinema Display) during start up, chimes, fan, apple logo then shuts down.  Just began. Will not complete the boot 

    The chime is generated in software when your Mac passes the Power-On Self Test. If a suitable source of software can be found, booting is likely.
    The dark gray Apple is not resident in any ROM. It can appear only after it is loaded from a boot device.
    Your Mac will shut down during boot-up if the Boot Drive is so damaged that it cannot be mounted.
    So focus your energy on repairing your Boot Drive using Recovery_HD or the 10.6 DVD, as appropriate.

  • Macbook Pro shuts down - unprompted message asks if I want to shut down

    Hoping someone can help me with this recurring problem on my Macbook Pro...
    I'll be working on my computer when all of a sudden an option comes on the screen
    "Would you like to shutdown computer" options include "sleep, shutdown, cancel"
    if I make it to cancel quick enough, I'm okay, but even sometimes after I hit cancel my computer shuts off in a blink of an eye!
    This problem will go away for a couple of weeks, and then will come back.
    I've updated my software but continue to have the problem. Any suggestions?
    Macbook Pro Mac OS X (10.4.9)
    Message was edited by: Duane Gibson

    It sounds as though your delete key and your power button are somehow getting crossed up. Take the machine in for evaluation by a technician. If it's under warranty, this should be covered.

  • I-MAC has the grey screen on start up, then shuts down after trying to load (bar shows 30%).

    Shutdown my I-mac and next morning the grey screen appears with a loading bar which gets to 30% and then i-MAC shutsdown. Went into Utilities and it shows my files etc. but the verify and the repair disk have not corrected the issue(s).
    What else can I do before I take it to the apple support. I live in Brunei and past history suggests that the Apple Support will just erase everything on the drive and I will lose the lot. I just want the photos and my own CD loaded music.
    Any suggestions would be welcome.

    Look at this: http://support.apple.com/kb/ts2570

  • My MacBook Pro 13" Solid state Retina display stars then it will randomly show a gray boxed message asking:Are you sure you want to shut down your computer. It gives 4 alternatives Re start, sleep cancel or shut down

    My 2013 MacBook Pro 13" Solid state Retina display stars then it will randomly show a gray boxed message asking:Are you sure you want to shut down your computer. It gives 4 alternatives Re start, sleep cancel or shut down. This is what it shows before shutdown.
    Fernando

    This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

  • I'm using  lion 10.7.1 and ever since upgrading  my preferances are not saved after I shut off the computer. My screen saver is always photos even after changing it, itune always asks if I want to upgrade, even after telling it never to.

    When I turn off the computer my preferances are forgot. My screen saver aways goes to photos. Ittune always ask if I want to upgrade even after telling it not to . firefox always goes the upgrade page  a progam I  have to save my clipboard resets itself.

    This does appear to be an issue with synergy, but I've also noticed on my C2D Macbook Pro that the screen does not wake from sleep when I simply touch or move around on the touchpad.  Now, I have to hit a button (like return) to get the monitor to wake up.  Submitting a button strike through synergy does not work, though.  Neither does a mouse click on either the trackpad or through synergy.
    It also appears that synergy is functioning even though the monitor is off.  My mouse does move to the screen and progress across it (I have a three monitor setup with the Mac in the middle, so I can move it off my left system to my Mac, keep moving, and eventually it will show up on the third screen).  If synergy weren't working, I would expect it to go from screen 1 to screen 3.
    So I think there's something up with how Lion detects that the monitor should be reenabled, and synergy is even more affected by that decision.

  • I am asked repeatedly if I want to shut down my computer when I do not. How can I stop this from happening?

    I am asked over and over again if I want to shut down my computer now. No matter how many times I click "cancel" the box returns with the same maddening question. I'm using Lion on a Mac Pro. How can I get this to stop?

    Perhaps the problem is that your Security setting is set to log you out immediately that your Sleep mode activates. And maybe your sleep setting is quite frequent.
    Otherwise you may have set a shutdown timing in Energy Saver>Schedule that keeps repeating when you cancel the Shut Down window.
    I haven't tried these yet and they are rather obscure, but they may be the software problems to check before servicing your hardware (keys and power button).

  • Macbook pro random shutdown "are you sure you want to shut down?"

    Firstly, I'm asking this on behalf of my boyfriend who would ask himself if his computer were working!
    His MacBook Pro 2.2GHZ new since July07 has just now, when started up, started displaying the shutdown message "are you sure you want to shut down?" and then shutting down anyway. Without being asked or prompted.
    This has happened everytime it has been switched on after a couple of minutes it will just do it over again. It is fully charged.
    Absolutely no idea what to do other than to take it down to the Mac Store and get it looked at.
    If anyone has any help or advice it would be greatly appreciated,
    thanks in advance. Charlie

    Ok thought i had this fixed myself, i put it down to over heating as it was just acting normally for the last couple of hours but having just turned it off and started shutting everything down for the night it turned itself on!
    I think i solved this by shutting the laptop but this has never happened before. I really hope someone can help, I've googled the problem to no avail and this is pretty much my last hope.
    Thanks again
    Charlie

  • I backed my iphone up then i  restored my phone and when i tried to open it  asked if i wanted to hook up with iTunes or iCloud  i hit use back up to iTunes and it will not go anywhere ive plugged it in and replugged it in and i get nothing past that ive

    i backed my iphone up then i  restored my phone and when i tried to open it  asked if i wanted to hook up with iTunes or iCloud  i hit use back up to iTunes and it will not go anywhere ive plugged it in and replugged it in and i get nothing past that ive restared my mac and my phone

    Try a reset:
    1. Hold the Sleep and Home button down (together) for about 10 seconds
    2. Until you see the Apple logo (very important)

  • I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive ,what program  can I used  to transfer one hard-drive  to another  hard- drive  on this mac pc.

    I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive
    ,what program  can I used  to transfer one hard-drive  data to another  hard- drive  on this mac pc.

    The Disk Utility, Carbon Copy Cloner, SuperDuper, or similar software. For best results, place the second drive inside the computer or in a FireWire enclosure and boot the computer from it before removing the internal drive.
    (66989)

  • Even when I charge my Mac Pro to the full bar, the battery seems to be drained even when I am not using it. Example, after charging it full, i switched it on the next day and its 79% battery left. Is there something wrong? help please

    Even when I charge my Mac Pro to the full bar, the battery seems to be drained even when I am not using it. Example, after charging it full, i switched it on the next day and its 79% battery left. Is there something wrong? help please

    Assuming you are disconnecting from line power, when you say switched on, do you mean it was shutdown or in sleep mode?  If sleep mode the battery will still drain because sleep still keeps some things active and the battery does drain a little.  However, to go from 100% to 79% charge overnight is a bit excessive in sleep mode.  Unless you have some processes set to activate over night by the cron file and do things like backup the system.
    What are the statistics on the battery, the apple in the upper left corner, About This Mac, More Info, System Report, Hardware, Power...things like battery Condition, Capacity, remaining charge, voltage, current.

  • Mac book pro, overheats and shuts down as 2 hours the use

    mac book pro, overheats and shuts down as 2 hours the use

    Hi, I am facing the same issue.
    Did you able to solve your issue? Please advise.

  • How do I shut down Microsoft Database Daemon SyncServicesAgent - Installer wants it shut down in order to proceed with the installation of Microsoft MAC Office 2011.   I cannot find the offending application anywhere.   Why this stupid obstacle?

    How do I shut down Microsoft Database Daemon SyncServicesAgent - Installer wants it shut down in order to proceed with the installation of Microsoft MAC Office 2011.

    open activity monitor (applications>utilities) and quit all the ms office files running in there

  • Mac book pro mid 2009 shuts down after a few hour then will only boot after waiting and pressing power button numerous times. I am running mountain lion with most recent updates.

    Mac book pro mid 2009 shuts down after a few hour of use and then is very difficult to reboot. Sometimes I have to wait hours, sometimes I have to repeatedly press the power button and then it will slowly start a little longer each press untill it completely boots. It has done this three times know.  Each time I was watching a video.

    Try running the Apple Hardware Test - sounds as if you've hardware issues.
    Clinton

Maybe you are looking for

  • Emctl failed to start

    Hi It is a new configuration of EMCA on clone instance in EBS R12.1.3 on linux (RHEL5.5) x86_64.DB:11.1.0.7 emca -config dbcontrol db -repos recreate failed with error for not getting proper emkey.ora which is not with our any of instance ever. Aug 2

  • AFS ATP Problem

    Hi All, I'm having a problem right now with an AFS material that is promising against a purchase order that has already been fully promised against.  Material 1000, grid C, has a PO in the system for 75 units.  There are orders saved that total up to

  • PE13 on Windows 8.1 and non-admin or UAC issues?

    Before I try to evaluate Premiere Elements 13 64-bit, I want to ask if lingering problems related to UAC and non-admin user accounts were resolved since version 11. It's good to see a 64-bit version of Elements come out since then.

  • I want to make sure all images included are linked correctly in my work.

    Hello there, I'm sorry to bother you with my question, but I hope you will be able to answer me. The real thing is, What I made on Windows 8.1 Adobe InDesign CC Includes a link to every picture starts with E:// or something. Since I want to make it u

  • String text color

    I am trying to do the following. I have a VI which updates the current weight of an item and compared it to the initial weight through division, when it is between 10%<item<25% I have it inserting into an array (that has all the item information) a s