Mac Pro 1.1 How to control PSU fan

Dear Users
I have an upgraded (2 x X5355 8 core) Mac Pro 1.1 running 10.7.4. I routinely use SMCFanControl (the latest version) to ramp up the fans when I am running long, CPU-intensive jobs. However, SMCFanControl only changes three of the four fans - the PSU fan remains stuck on 600rpm, regardless of the settings. My PSU is getting pretty hot - 70+C, so I am looking for a way of cranking it up. Any suggestions will be greatfully received.
Thanks BB

BiscuitBarrel wrote:
Dear Users
I have an upgraded (2 x X5355 8 core) Mac Pro 1.1 running 10.7.4. I routinely use SMCFanControl (the latest version) to ramp up the fans when I am running long, CPU-intensive jobs. However, SMCFanControl only changes three of the four fans - the PSU fan remains stuck on 600rpm, regardless of the settings...
That's a good question. It's been a while since I've run my 1,1 Mac Pro, but I remember that smcFanControl could change everything but the PS fan (which is at the front of the PS brick, right behind the DVD drives - I just took the cover off and doublechecked). On my current Mac Pro, which has the same DVD/PSU layout, smcFanControl can control all the fans.

Similar Messages

I have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?

i have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?

No not bothered about sycing apps etc it is all about calendars and maybe notes. IN terms of how its done I just want it the easiest way and preferably so that if an entry is made on one calendar then it populates the other.
Thgius is beacuse I have my work diary on outlok, which I then link with my ical. I want to make sure that information is then shared with her.
Chris

My mac pro is locked how to unlock

My mac pro is locked how to unlock?

Locked how exactly?
If you mean the drive is locked then see:
Fix Permissions for a Locked Drive
Open Terminal in the Utilities folder. Paste the following at the prompt. Press RETURN after each. The first command will prompt for you to enter your admin password. It will not be echoed to the screen. After entering your password press RETURN again.
sudo chflags 0 /volumes/*
sudo chmod a+rx /volumes/*
killall finder
An alternative is to download BatChmod and use it to fix the permissions.

After connecting mac pro to tv, how to view movie on tv from laptop

After I connect my Mac Pro to my tv, how do I view a movie on tv coming from my laptop ?

Hi Anita, I have neither, but I doubt it should be so, but you may get a better answer over in one of these two, since this is the Tiger/10.4/Printing & Faxing forums...
http://discussions.apple.com/post!default.jspa?forumID=1225
http://discussions.apple.com/forum.jspa?forumID=1185
Good luck Anita.

Mac Pro 1,1 how to troubleshoot no graphics output, no video output

Mac Pro 1,1 OS 10.7.5
Bootup sounds normal but the Apple Cinema Display (ACD) is black. Same result in Safe Mode. The ACD works perfectly when cable is switched over to either of 2 MacBook Pro. Thinking it might just be failed graphics card I brought back from USA to NZ a Radeon X1900 XT PCIE 512M. To my delight, when I installed the X1900 the video out was normal (2 weeks ago). I did a bit of testing over an afternoon, then shutdown the MP and offered it for sale.
With a buyer awaiting shipment I setup the MP again to wipe drive and pack. No graphics again. Safe Mode, same result. ACD still tests fine (I've been using it 100% as MBP monitor). There's no point in sending MP down to Auckland to the only recommended service agent. Their fees will exceed the market value.
Any thoughts on how I should troubleshoot this?

Update: This case is getting more confusing and complex. Following my last update I succeeded to get the Mac Pro to boot in Safe Mode. Then I booted normally twice. Things were looking up so I started working on wiping a drive to package with the MP for sale. I ran Geekbench OK and Stress Test for 15min OK then left the MP powered overnight. This AM the MP was unresponsive. The ACD light was still on. After forcing shutdown and reboot I see a kernel panic log. Below are the first few lines through the non-Apple kext.
Next on the MacPro I inserted a security-erased drive, then SuperDuper cloned the working boot drive system and the admin-user. That new semi-clean boot drive would not startup. Neither would the source of the clone -- the drive that I had been successfully booting. I tried various Lion bootable disks and startup keys for a couple of hours. One boot worked in Safe Mode but not on the next 2 tries. Did the PRAM reset voodoo etc.
What should I do now?
=============================================
Interval Since Last Panic Report: 5663925 sec
Panics Since Last Report: 1
Anonymous UUID: 76FCCD2F-0232-4482-A0D3-0DB705A20746
Sat Feb 7 07:10:37 2015
panic(cpu 1 caller 0x2b1391): "TLB invalidation IPI timeout: " "CPU(s) failed to respond to interrupts, unresponsive CPU bitmap: 0x8, NMIPI acks: orig: 0x0, now: 0x0"@/SourceCache/xnu/xnu-1699.32.7/osfmk/i386/pmap.c:3024
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x61823318 : 0x2203de (0x6b08cc 0x61823338 0x229fb0 0x0)
0x61823348 : 0x2b1391 (0x6b8eec 0x8 0x0 0x0)
0x61823398 : 0x2b44d5 (0x867960 0x60f0a000 0x0 0x60f0b000)
0x618233f8 : 0x28667e (0xd36b 0x0 0x2b05d74 0x2b05d68)
0x61823458 : 0x2789a1 (0x108ae018 0x0 0x0 0x1000)
0x61823518 : 0x27baca (0x0 0x60f0b000 0x0 0x1)
0x618235c8 : 0x21d0b2 (0x2b05d68 0x60f0a000 0x0 0xf4)
0x61823638 : 0x223bd6 (0x8edfad4 0x61823670 0x61823678 0x6182366c)
0x61823688 : 0x5cc84b (0x9e1d000 0x5ca4e0 0x618236a0 0x5ca75d)
0x618236b8 : 0x5cced5 (0xb9d2e88 0xca01fd0 0x1 0x100)
0x61823ee8 : 0x5cd1cd (0x35f 0xe 0x0 0x0)
0x61823f28 : 0x5cd305 (0x2 0x35f 0xe 0x0)
0x61823f78 : 0x5f3c2a (0x942f308 0xa04ea94 0xa112d5c 0x0)
0x61823fc8 : 0x2e60a7 (0xa04ea90 0x1 0x10 0xa04f0d0)
BSD process name corresponding to current thread: lsof
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:26:45 PDT 2012; root:xnu-1699.32.7~1/RELEASE_I386
Kernel UUID: 859B45FB-14BB-35ED-B823-08393C63E13B
System model name: MacPro1,1 (Mac-F4208DC8)
System uptime in nanoseconds: 20748711521539
last loaded kext at 15230144802455: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xcf5000, size 16384)
last unloaded kext at 15292997016639: com.apple.driver.CSRHIDTransitionDriver 4.0.8f17 (addr 0xb41000, size 12288)
loaded kexts:
com.google.driver.Gild 1.0.0
com.bresink.driver.BRESINKx86Monitoring 3.0
com.Cycling74.driver.Soundflower 1.5.3
com.microsoft.driver.MicrosoftMouseUSB 8.2
com.microsoft.driver.MicrosoftMouse 8.2
com.rogueamoeba.InstantOnCore 6.0.2
com.AmbrosiaSW.AudioSupport 2.3.6
com.rogueamoeba.InstantOn 6.0.2
com.apple.driver.IOBluetoothSCOAudioDriver 4.0.8f17
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.kext.ATIFramebuffer 7.3.2
com.apple.ATIRadeonX1000 7.0.4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3

My mac pro has died, how can I see my emails on my macbook

My Mac Pro has died. I intend to get it repaired, obviously, but I need to see my emails from the many years of emails archived on its undamaged hard drive. I have removed the hard drive and connected it to my macbook using a USB carrier. I can find myself under the users, but the library file where the mail folder is kept remains hidden, so I can't copy it across.
What can I do to get my emails useable again immediately?
I posted this before but on a Macbook discussion and got no useful reply.
It surely is possible to do this isn't it?

In Finder select Go, then hold the option key.
You will now see Library. Select it and navigate to Mail.
emails are in V2 Folder
See eric's suggestion to "check ’Show Library Folder’"
f1eng wrote:
What can I do to get my emails useable again immediately?
To keep it seperate from the Mail already on this Mac, I would set up another user account (->System Preferences->Users & Accounts), and then log into the new account. Quit Mail, Delete ~/Library/Mail in the new account and copy Mail from the other Mac.
Delete these files to force a re-index:
Open Mail

Need advice on what Mac Pro to purchase/how much ram

Hi.. this is my first post...
I have been a Logic user for--15 years??-- and love the program. I have been using only pcs and now have to switch to Mac because, well..... we all know why....
Here's my question....
With a certain amount of cash to spend ( using Logic pro/ express ), and a lot of audio samples to crunch, am I better off::::
1.---buying the more expensive 3.0 ghz Mac pro with, say, 3 gigs of ram or,
2.---buying the cheaper 2.7 ghz Mac pro and use the savings to load up with more ram memory?
I lean towards the #2 just because 'they' say more ram is good. Up to now all my pc's were just stock and they ran, more or less, fine with few problems. Mind you, I was using midi exclusively..no audio files at all.
I will be recording only one live instrument ( a flugelhorn---brass instrument ) so that's about it!!
Any guidance would be appreciated..
Thanks all
Ray
Miami Beach

Well, the old computer saying goes, "buy the fastest computer you can afford, at that time"... or something like that...
That being said, a new 2.7 Mac Pro ain't a shabby beast, by anyones standards.
3 gigs of RAM is pretty good... for now. But in anticipation of the new OS Leopard, and the inevitable rewriting of Logic that will take place (or is currently in progress), to allow it to access more than 4 gigs of RAM... more RAM wouldn't hurt either. You'd be putting yourself in a position to be able to take advantage of those advancements, when they occur.
So, my 2 cents is with you... a 2.7 Mac Pro with more RAM (maybe 6 to 8 gigs worth...? ) looks quite nice.

Mac Pro has died - it powers on but fans roar, screen stays black.

I had just woken my Mac Pro from sleeping overnight. It's running 10.4.8.
I open the boot hard disk in column view. I click the Applications folder to expand it into the next column.
The desktop disappears to be replaced by an all over blue raster. After a minute, that little grey rotating sun "wait" symbol you normally only see during start up, appears in the centre of the screen. I have no menubar or cursor.
I have been staring at this situation for five minutes now. I have never seen a Mac behave like this before.
I suppose the only option is to hold the power button in until the thing shuts down.
I shut it down with the power button. Powering up again, the fans roar, the screen remains dark, and that's the way it stays. No boot.
The only thing changed recently was the installation, yesterday, of the latest EFI Firmware Update v1.1.
I feel that this update has broken the computer. What are my options now?

Here's a copy of the relevent part of the log. I can't deduce what went wrong.
Dec 31 15:16:55 macpro kernel[0]: Intel8254x -- Link down -- 00:17:f2:00:39:8e -- called by disable() --
Dec 31 15:16:55 macpro kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0xcde1, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x7c00
Dec 31 15:16:55 macpro kernel[0]: Intel8254x -- Link down -- 00:17:f2:00:39:8f -- called by disable() --
Dec 31 15:16:55 macpro kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x0, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x4000
Dec 31 15:16:58 macpro configd[75]: posting notification com.apple.system.config.network_change
Jan 1 10:12:26 macpro kernel[0]: System Sleep
Jan 1 10:12:26 macpro kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 1 10:12:26 macpro kernel[0]: Started CPU 01
Jan 1 10:12:26 macpro kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 1 10:12:26 macpro kernel[0]: Started CPU 02
Jan 1 10:12:26 macpro kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 1 10:12:26 macpro kernel[0]: Started CPU 03
Jan 1 10:12:26 macpro kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Jan 1 10:12:26 macpro kernel[0]: System Wake
Jan 1 10:12:26 macpro kernel[0]: USB caused wake event (EHCI)
Jan 1 10:12:29 macpro kernel[0]: Intel8254x -- Link Up -- 00:17:f2:00:39:8e -- called by interruptOccurred() --
Jan 1 10:12:29 macpro kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0xcde1, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x7c00
Jan 1 10:12:31 macpro kernel[0]: Intel8254x -- Link down -- 00:17:f2:00:39:8f -- called by enableHardware() --
Jan 1 10:12:31 macpro configd[75]: posting notification com.apple.system.config.network_change
Jan 1 10:12:31 macpro kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x0, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x4000
Jan 1 10:12:31 macpro lookupd[383]: lookupd (version 369.6) starting - Mon Jan 1 10:12:31 2007
Jan 1 10:12:36 macpro mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.254.
Jan 1 10:13:12 macpro /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: mcxd [387] Giving up waiting for mcxd process 386 to quit after waiting 30 seconds
Jan 1 10:13:14 macpro crashdump[389]: loginwindow crashed
Jan 1 10:13:14 macpro /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer: kCGErrorInvalidConnection : CGSGetNextEventRecord: Invalid connection
Jan 1 10:13:14 macpro /Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/MacOS/iTu nesHelper: kCGErrorInvalidConnection : CGSGetNextEventRecord: Invalid connection
Jan 1 10:13:14 macpro /Applications/TechTool Pro 4.app/Contents/SharedServices/0-StartupInit.service/Contents/Frameworks/TechToo lProtection.app/Contents/MacOS/TechToolProtection: kCGErrorInvalidConnection : CGSGetNextEventRecord: Invalid connection
Jan 1 10:13:14 macpro /Applications/Utilities/StuffIt 11/MagicMenu.app/Contents/MacOS/MagicMenu: kCGErrorInvalidConnection : CGSGetNextEventRecord: Invalid connection
Jan 1 10:13:14 macpro /Library/Application Support/Logitech/LCCDaemon.app/Contents/MacOS/LCCDaemon: kCGErrorInvalidConnection : CGSGetNextEventRecord: Invalid connection
Jan 1 10:40:51 localhost kernel[0]: hi mem tramps at 0xffe00000
Jan 1 10:40:51 localhost kernel[0]: PAE enabled
Jan 1 10:40:51 localhost kernel[0]: 64 bit mode enabled
Jan 1 10:40:51 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jan 1 10:40:51 localhost kernel[0]: vmpagebootstrap: 973215 free pages
Jan 1 10:40:51 localhost kernel[0]: migtable_maxdispl = 71
Jan 1 10:40:51 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 1 10:40:52 localhost kernel[0]: 87 prelinked modules
Jan 1 10:40:52 localhost kernel[0]: ACPI CA 20060421
Jan 1 10:40:52 localhost kernel[0]: AppleIntelCPUPowerManagement: ready
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=7 Enabled
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=6 Enabled
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=0 Disabled
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=0 Disabled
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=0 Disabled
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=0 Disabled
Jan 1 10:40:52 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jan 1 10:40:52 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jan 1 10:40:52 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
Jan 1 10:40:52 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 1 10:40:52 localhost kernel[0]: Started CPU 01
Jan 1 10:40:52 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 1 10:40:52 localhost kernel[0]: Started CPU 02
Jan 1 10:40:52 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 1 10:40:52 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Jan 1 10:40:52 localhost kernel[0]: Started CPU 03
Jan 1 10:40:52 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jan 1 10:40:52 localhost kernel[0]: Security auditing service present
Jan 1 10:40:52 localhost kernel[0]: BSM auditing present
Jan 1 10:40:52 localhost kernel[0]: disabled
Jan 1 10:40:52 localhost kernel[0]: rooting via boot-uuid from /chosen: D0D041A1-934C-43A6-9F40-9FD36B407BC9
Jan 1 10:40:52 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jan 1 10:40:52 localhost kernel[0]: USB caused wake event (EHCI)
Jan 1 10:40:52 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT1 @1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/Hitachi HDS725050KLA360 Media/IOGUIDPartitionScheme/AppleHFS_Untitled1@2
Jan 1 10:40:52 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Jan 1 10:40:52 localhost kernel[0]: jnl: replay_journal: from: 32989696 to: 16164864 (joffset 0xe8e000)
Jan 1 10:40:52 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0016cbfffe6be2d2; max speed s800.
Jan 1 10:40:52 localhost kernel[0]: CSRHIDTransitionDriver::probe:
Jan 1 10:40:52 localhost kernel[0]: CSRHIDTransitionDriver::start before command
Jan 1 10:40:52 localhost kernel[0]: CSRHIDTransitionDriver::stop
Jan 1 10:40:52 localhost kernel[0]: IOBluetoothHCIController::start Idle Timer Stopped
Jan 1 10:40:52 localhost kernel[0]: HFS: Removed 143 orphaned unlinked files
Jan 1 10:40:52 localhost kernel[0]: Jettisoning kernel linker.
Jan 1 10:40:52 localhost kernel[0]: Resetting IOCatalogue.
Jan 1 10:40:52 localhost kernel[0]: Matching service count = 0
Jan 1 10:40:52 localhost kernel[0]: Matching service count = 0
Jan 1 10:40:52 localhost kernel[0]: Matching service count = 0
Jan 1 10:40:52 localhost kernel[0]: Matching service count = 0
Jan 1 10:40:52 localhost kernel[0]: Matching service count = 0
Jan 1 10:40:52 localhost kernel[0]: Matching service count = 0
Jan 1 10:40:52 localhost kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
Jan 1 10:40:52 localhost kernel[0]: 4.80.46.0Previous Shutdown Cause: 0
Jan 1 10:40:52 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jan 1 10:40:51 localhost mDNSResponder-108.2 (Aug 25 2006 14: 50:48)[30]: starting
Jan 1 10:40:51 localhost memberd[38]: memberd starting up
Jan 1 10:40:53 localhost lookupd[47]: lookupd (version 369.6) starting - Mon Jan 1 10:40:53 2007
Jan 1 10:40:53 localhost kernel[0]: jnl: replay_journal: from: 171520 to: 558592 (joffset 0x23beda1000)
Jan 1 10:40:53 localhost diskarbitrationd[36]: disk0s2 hfs 38F80FD8-FEAA-32FA-A2F4-0516ED890026 Brenda /
Jan 1 10:40:53 localhost diskarbitrationd[36]: disk1s2 hfs F4D426C5-27DB-3E57-B66F-481250D57EA6 Alice /Volumes/Alice
Jan 1 10:40:53 localhost diskarbitrationd[36]: disk2s2 ntfs 00000000-0000-0000-0000-000000000000 WindowsXP /Volumes/WindowsXP
Jan 1 10:40:53 localhost DirectoryService[48]: Launched version 2.1 (v353.5)
Jan 1 10:40:57 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:00:39:8e
Jan 1 10:40:57 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:00:39:8f
Jan 1 10:40:57 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:17:f2:95:46:e9
Jan 1 10:40:58 localhost kernel[0]: Registering For 802.11 Events
Jan 1 10:40:58 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
Jan 1 10:40:59 localhost mDNSResponder: Adding browse domain local.
Jan 1 10:41:00 localhost kernel[0]: Intel8254x -- Link Up -- 00:17:f2:00:39:8e -- called by interruptOccurred() --
Jan 1 10:41:00 localhost kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0xcde1, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x3c00
Jan 1 10:41:00 localhost lookupd[72]: lookupd (version 369.6) starting - Mon Jan 1 10:41:00 2007
Jan 1 10:41:01 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jan 1 10:41:01 localhost loginwindow[74]: Login Window Started Security Agent
Jan 1 10:41:04 macpro kernel[0]: Intel8254x -- Link down -- 00:17:f2:00:39:8f -- called by enableHardware() --
Jan 1 10:41:04 macpro kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x0, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x4000
Jan 1 10:41:04 macpro configd[34]: setting hostname to "macpro.local"
aped[67]: TechToolProtecti[104] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
Jan 1 10:41:07 macpro configd[34]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Jan 1 10:41:07 macpro configd[34]: posting notification com.apple.system.config.network_change
Jan 1 10:41:07 macpro lookupd[108]: lookupd (version 369.6) starting - Mon Jan 1 10:41:07 2007
Jan 1 10:41:09 macpro kernel[0]: (90: aped)tfp: failed on 196:
Jan 1 10:41:09 macpro configd[34]: target=enable-network: disabled
Jan 1 10:41:11 macpro mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.254.
Mac Pro 3GHz/4GB/3xHDD/X1900XT + 2x30" Cinemas. Mac OS X (10.4.8) PMG5/DP2½GHz — PBG4/1GHz 12".

Mac Pro firmware update (AUG.'07) causes fan spinning@ loud volume-

Just ran the Mac Pro firmware updater from software update and now the fan is on extremeley loudly as soon as I boot-up and *does not quiet down at all* during operation. Also, there is no power light on the front of the Mac Pro tower. I read somewhere that this was supposed to improve fan performance but is has worsened it dramatically.
I read that this firmware update is the first of its kind to not require the removal of RAID disks… but I have a RAID disk so it gets me wondering that maybe it's related…?
Mac Pro 2 X 3GHz Dual-Core running 10.9.10
Any ideas? I have tried resetting the PRAM, but nothing changed. Also, I cannot shutdown consisstenly, I have to power-down with a hard reset.
Thanks,
-Phil

A. You should apply it from a non-RAID.
B. You might want to reset the SMC.
*Note: This update requires a Macintosh-formatted disk or*
*partition. If you are starting up using a RAID (Redundant Array of*
*Independent Disks) subsystem, you must connect a Macintosh-formatted*
*storage device to apply this update.*
Some USB and FireWire devices may prevent firmware updates from
installing correctly. If you are having trouble installing an update
try disconnecting non-essential devices and use only an Apple keyboard,
mouse, and display.
http://www.apple.com/support/downloads/macprosmcfirmwareupdate11.html
... and you read that it doesn't matter if the BOOT volume is a RAID?
There was/are some mis-statements out there. Booting from a RAID is not supported. Removing a RAID array was never an issue (non-boot volumes).
And me, I always avoid installing using Software Update and go to Apple Downloads.
http://www.apple.com/support/downloads/

Photoshop CS6 on a Mac Pro 1,1 - how much RAM can it access?

Hi everybody,
After reading many related threads, I have gathered that the MP 1,1 has 64bit architecture, but only runs a 32bit kernel. Will this limit PS CS6 accessing all the RAM (currently 13 GB) on my MP 1,1?
Many thanks!

There are still benefits to more RAM when working with files that can grow or take up more memory even though you are not using 64-bit kernel, but still able to run CS6 as a 64-bit application.
people have outfitted their MacPro1,1 with more than 16GB to full 32GB to improve performance. That along with SSD for scratch and another for system (or use an array for scratch, though memory is your best "scratch") and of course an array for loading files and for your save volume (2GB files taking too many seconds?).
I assume you read through all the
http://forums.macrumors.com/showthread.php?t=1365904
- not sure about using GTX 570 but that would be nice too.
http://macperformanceguide.com/OptimizingPhotoshop-Intro.html
http://macperformanceguide.com/PhotoshopCS5-performance.html

Keep getting my daughter iMessage on my mac pro in messages , how do i remove her number?

my daughters imessages keep coming through on my mac

Are you using the same AppleID as your daughter - or used the same AppleID?

How to control system fan

are there any programs out there to control the speed of the system fan, or am i stuck with what the motherboard wants?
875P

I love my reobus . I have 6 fans all controlled from 0-12V. I run them a 7V all the time but it is nice to have the option to go higher if need be.

Mac pro wont boot no chime blank screen fan running 100%

When switching on the mac no chime happens, fans come on as normal then build up to 100% speed and all that happens is the light solid on the front and black screen, did the diagnostic on the logic board all that lights up is the orange trickle LED, i have done reaserch on this and aparently the riser cards have leds that light up when turning on the machine, i have also read that it could be a logic board needs replacing im really hope its not that and something else because they cost a fortune to replace. if anyone knows what is happening would muchly appreciate help
thank you

fair enough thought it would of been a logic board prolem i will try taking out the card and see what happens. if like you said it beeps do i need to replace the power supply ??
If it beeps with the video card removed that would mean it's the video card that is the problem.
I gave the computer a general clean last night but nothing major as in pulling out the cpu and giving it a clean, could that also be a problem ?
It's always good to limit the dust just to minimize overheating. But I don't think that the problem here. Just good maintenance.
also another question what are the symptoms of a logic board failure?
Machine does't work? I can't really be definitive. What happens if there is a logic board failure in your TV? I think you get the line of thought here.
thank you again you are being most helpful
You're welcome and good luck.

I already bought mac book pro last year but it can't view windows just like mac pro for education. I want to make like it. How?

I already bought mac book pro last year but it can't view windows just like mac pro for education. I want to make like mac pro for education How?

First, if you have a MACBOOK PRO (a laptop), you should post in that forum. MAC PRO (desktop) and Macbook Pro are different things, so when you use those terms interchangeably, it's impossible to know what you're talking about.
Second, even guessing that you have a laptop, I still have no idea what your question means. Are you trying to load Microsoft Windows on it? Every Mac can run Windows using either Boot Camp or Parallels/Fusion/VMWare solutions. Please explain in more detail what you're trying to do, and we'll try to help. But post in the Macbook Pro forum if you're talking about a laptop.
Matt

How to specify which Ethernet port on a Mac Pro to send an Ethernet packet

Hi,
I am doing some development on a Mac Pro. The Mac Pro has two Ethernet ports on the rear: Ethernet 1 and Ethernet 2.
I want to specify which of these ports I send a UDP Ethernet packet from.
In my code I currently create a socket and send data through this. This works fine, but the data (packet) always seems to come out of Ethernet port 1 on the rear of the Mac Pro.
So, how / where do I set in my code which port (Ethernet 1 or Ethernet 2) on the back of the Mac Pro to send my packet out of?
Cheers!
SkinnyC

It's ok, found this
http://lists.apple.com/archives/macnetworkprog/2008/Feb/msg00070.html

Mac Pro 1.1 How to control PSU fan

Similar Messages

Maybe you are looking for