Mac pro 1.1 upgrade ?

I have a 2006 mac pro 2.66 dual core which I've been very fond of... I am thinking about buying a macbook  pro to replace mac aging mac pro.
I do light video editing, photoshop and light gaming on a 30" Apple monitor. .  Want to keep the cost down to under $1200 and a used machine is not out of the question. Any suggestions ?

Take a look at what is available in the refurbished section of the Apple web site.  Same guarantee and telephone support as a 'new' MBP.  I have gone this route three times with no regrets.
Ciao.

Similar Messages

  • HT201364 My Mac Pro will not upgrade past 10.7.5 Now what?

    My Mac Pro will not upgrade past 10.7.5 Now what?

    No, it is not possible. I have an early model, too, that now sits in a corner. I replaced it at the time with a mid-2011 iMac. The only less expensive route than a new computer is a used/refurbished model, but were you to go that route stick to a 2009 or later model MP.
    Surely your business can afford £2500 for a necessary asset. It's depreciable for tax purposes if your tax system allows that. Just ask yourself how much it would cost your business if you did not have a computer. And, consider, if you really need to get a new computer assuming the one you have is still working. Keep it and start putting away enough from your business revenue to buy a new computer later. It's a required part of business planning.

  • Why can't I attach files with my hotmail account on my mac pro since I upgraded to lion?

    why can't I attach files with my hotmail account on my mac pro since I upgraded to lion?

    i can' t believe it but after 3 hours of reading everything i could find on this subject i discovered the answer on accident: IT'S THE CLOCK!!!!! I know that it sounds crazy but go to settings and go to date and time and set it to the automatic date and time, even if it's the wrong time. after i did that, everything worked perfectly! aldiko accepted my adobe id and imported my purchased book happily.  i hope it is that easy for everyone, best of luck.

  • Mac Pro 2009 Processor Upgrade Possibility?

    I've searched and can not seem to find a straight answer.  I have a 2009 Mac Pro with the single 2.66 quad-core processor.  Since these Pro's use the daughter board (or whatever it's called) with the processor and RAM on them, can I just swap out that board with one from an official 2009 Mac Pro that has a dual 2.26 quad core processors effectively turning it into a 8-core machine?  I'm not talking about tearing it down and swapping the actual processor, just pull the entire board out of a single proc machine and swap it with one from the same model year but with the dual proc machine.  Anybody know if that would work?

    Why would I consider selling and rebuying if the ENTIRE processor board with RAM and heat syncs and everything on it would simply plugin and work and I'd automatically have a dual processor setup?  I'm still not sure anyone is fully understanding what I'm asking.  Grant is the closest but I'm afraid of just trying it because I don't want to fry anything or break anything.  If I knew it would simply work or not work, I'd just try it, but I don't want to ruin anything by trying.  It's starting to sound like no one has ever tried this before.  To me it seems like such a simple way to upgrade if it actually works.  There would be no major disassembly, no processor swaps, no firmware upgrades, just a simple plug and play, but it sounds like no one can give me a straight answer.  I'm just shocked no one has tried this.  Anybody?  Anybody swap the entire single-proc board for the dual-proc board?
    Maybe pictures will help.  Has anybody taken this out of their mac -
    And then stuck this is and powered their machine up?

  • Any update on Mac Pro 2013 ssd upgrade?

    Hi,
    I was wondering if anyone has any knowledge on weather an SSD upgrade for the current 2013 Mac Pro will be available soon. I bought a new Mac Pro 3.7 GHz Quad-Core Intel Xeon E5 12GB RAM for my music production for my studio, however I'm now finding the small SSD a limitation to working with software that needs a lot of space available on the hard drive to install. As far as space for files, I use a external hard drive so that doesn't really matter. I've been constantly checking the web ever so often to see if there is any updated news on pcie ssd upgrades for the new mac pro but can't find anything. OWC did make a prototype SSD for this machine and rumours were that in the 4th quarter on this year they would be available for the public, however that doesn't seem to be the case...
    I really wish I went for the 500gb version now even if it was a bit more expensive.
    If anyone has any information on when aftermarket pcie based ssds for this machine will be available it will be much appreciated.
    Phil.

    New TB2 product - OWC ThunderBay 4 Mini
      http://macperformanceguide.com/blog/2014/20141117_0902-OWC-ThunderbayMini-announ ced.html
    Key Features:            
    •    Four 2.5” drive bays, perfect for SSDs
    •    Breathtaking Thunderbolt 2 performance with sustained speeds of up to 1,284MB/s
    •    RAID-ready with up to 4TB of SSD storage (HDD up to 8TB)
    •    Near-silent operation
    •    SoftRAID 5 – first ever software RAID 5 for the Mac (available with ThunderBay 4 mini RAID 5 Edition)
    •    Flexibility to combine multiple ThunderBays into a single massive RAID array
    •    Regimented multi-hour drive “burn-in” for ultimate reliability

  • Can I install Windows 8 on an older Mac Pro with Mavericks upgrade?

    I have an Early 2008 Mac Pro which I just upgraded to Mavericks, which came with Boot Camp 5.1. Can I install Windows 8 on my machine? The information on this site suggests I can only use Windows 7 with Boot Camp 4 on my system, but does this take an upgraded OS into account? Put another way, is the version compatibility determined only by my OS, or also by my hardware (processor, memory, etc.). This is the first time I will be using Boot Camp to install Windows on this machine.

    no, it is determined mainly by machine type then by requisite driver support in the OSX
    officially, x64 w7 is as far as you can go but google around, i'm sure there have been people who got w8 to work
    http://support.apple.com/kb/ht5634

  • Mac Pro 3, 1 Upgrading Graphics Card Help!

    Hello to all and I first apoligize before hand incase there is a similar post.
    I am currently in the mix of getting myself a new graphics card and upgrading the RAM I have on my early 2008 (3, 1) Mac Pro and dont know what I am looking at.
    My current specs are as follows:
    Model Name: Mac Pro
    Model Identifier: MacPro3,1
    Processor:  2 x 2.8 GHz Quad-Core Intel Xeon
    Memory:  4 GB 800 MHz DDR2 FB-DIMM
    Graphics:  ATI Radeon HD 2600 XT 256 MB
    Software:  OS X 10.8.2 (12C60)
    I am currently having issues with not waking up from sleep and the performace with the graphics card rendering and fps in games are very poor. Tired of having all of my video settings on low.
    I play League of Legands, Dota 2, Portals, CounterStrike . . . etc. There are a lot of different options now for cards than ever before but I am looking to stay within a budget. For the graphics card I am not looking to spend over $400 and would love to find something even cheaper than that. I have researched many of the forms within discussions.apple, apple insider and as well have talked to a senior advisior with apple. She recomended the Nvidia Quadro FX 5600.
    I specificly want something at or above 1.0 GB VRAM to handle my 2 Displays which are:
    HP 2711:
      Resolution:          1920 x 1080 @ 60 Hz
    DELL 2405FPW:
      Resolution:          1920 x 1200 @ 60 Hz
    If anyone can point me in the right direction as to what to buy for a graphics card because I am not that well educated in that side of the computer. I can handle upgrading the RAM by myself but would also like a little push.
    Any help/response would be great!

    The "regular" Apple Mini Displayport to Single-Link DVI adapter (is not an ACTIVE adapter) is US$29. for displays up to 1920 wide.
    Third party Mini Displayport to Single-Link DVI adapter ACTIVE can be had for about US$35 from Amazon or NewEgg. for displays up to 1920 wide.
    http://www.amazon.com/Accell-B087B-006B-DisplayPort-Single-Link-Certified/dp/B00 4071ZXA/ref=sr_1_4?ie=UTF8&qid=1362369627&sr=8-4&keywords=ACTIVE+Mini+Displaypor t+DVI
    The Apple Mini Displayport to DUAL-Link DVI ACTIVE Adapter with additional power from an attached USB cord is US$100. required for for wide displays.

  • Premiere Pro CC and the new Mac Pro - are all upgrades necessary?

    Monday I'm ordering the new Mac Pro because my Mid 2012 Mac Pro tower is simply too slow and crashy no matter how much money I sink into it. Thing is, every little upgrade I add onto this new Mac Pro is very expensive, so I want to make sure I don't add anything that won't make a difference in edit performance.
    My ultimate goal is to be able to work with 4k, and even 5k footage in 2014. More and more clients are giving me Red media, and my system right now can't handle it (I have to render proxy files for everything).
    Attached are my hardware upgrade options for my processor and graphics card. These options can only be offered when I order the computer. Neither the processor or the GFX card can be changed by me later. Note that these options alone almost double the computers's price (3600). As of now I assume that getting the fastest everything is the way to go, but is there any reason I should not go this high?
    jesse

    We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason
    Anyone else got that too with Premiere Pro CC and the new Media encoder?
    Lack of detailed info makes your question impossible for anyone to answer you!
    eg. ...."Doctor it hurts...anyone else got something that hurts?" 

  • Basic Apple applications won't open on Mac Pro after Mavericks upgrade

    Hi,
    I'm having issues opening a number of basic applications including Quicktime and Itunes
    Through the App store I have updated everything, the last one I was holding out on was updating Itunes. I did that last night and now today Itunes won't open.
    I click the image in the dock, the icon briefly bounces upward and then after bouncing down does not open or display any kind of error message.
    I am running a 2008 Mac Pro w/ 2x2.8ghz quad-core, 10gb of RAM, these issues began after updating to Mavericks.
    Many other apps including FCPX, Adobe Premiere CC, VLC, App Store, are all working fine.
    It seems to be an issue with just basic Apple software - please help!

    Thanks for the suggestions... tried changing resolution and that had no effect, and I've checked my Perian and DivX installations in System Preferences and both say they are completely up to date. I upgraded Quicktime today to 7.5 before all of this became a problem -- but I don't know how to upgrade iLife. In Software Update everything is completely up to date (eg each of the iLife apps).
    Oh well, iMovie is not very useful to me anyway -- just somehow annoying that it fails to work. No point flogging a dead horse!!
    Any other ideas gratefully received... many thanks in advance

  • Bluetooth issues on Mac Pro after Mavericks upgrade

    I have a 2010 Mac Pro and I currently use a Logitech DiNovo for mac keyboard and the Apple Trackpad.  They were both working perfectly fine before upgrading to Mavericks.
    After the upgrade, I started experiencing latency issues in which both the keyboard and the trackpad would stop responding (not disconnecting).  I have already reseted the PRAM and SMC.  If anyone has any suggestions as on how to resolve this issue feel free to leave them here.
    Thanks!

    I just found another post from another user that has the same setup as I have (DiNovo & Apple Trackpad).  In this post they inidicate that the issue is being caused by the logitech software (Logitech LLC) even by version 3.8 which indicates Mavericks support.  After removing the logitech software I have not seen the issue again.  Below you will find the link.
    https://discussions.apple.com/thread/5473632?start=15&tstart=0

  • 1st Gen Mac Pro - Graphics card upgrade options?

    Hi guys,
    I have the 1st gen Mac Pro with 2 x 3GHz dual core xeons and a Radeon X1900 graphics card. I have wanted to upgrade to a new card for a while, however, I can't find any that apple say are compatible. I wanted to upgrade to a 5870 but on apples website it said this wasn't compatible with the first gen.
    What is the limiting factor here? Is it the software or hardware?
    What is the best card I can get for my machine?
    Please help!
    Thanks Guys
    Tom

    Your post has been added to a thread regarding Mac Pro Xeon Tower computers. These have nothing in common with your MacBook Pro.
    To get an answer that is meaningful, you need to post on the MacBook Pro forums, here:
    http://discussions.apple.com/category.jspa?categoryID=190

  • Mac Pro slow after upgrade to 10.5.5

    I got a certified Mac Pro a few month ago. It worked pretty fast in the beginning but then the performance slowed down. I called the Apple support and they just told me to upgrade from 10.5.4 to 10.5.5. But now my Mac is even slower than before; especially start up time takes a while.
    Also, when I do "Disk Utility – Repair Disk permission" I get these errors now:
    OwnerGroupTool" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/lppasswd" has been modified and will not be repaired.
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Can anyone help?

    Hi and thank you very much for all your suggestions!
    I'm really not a Mac expert. In my company we always had a technican. Now I'm working from home and need to deal with the technical stuff by myself. So please forgive me my answers below:
    Run Disk Warrior.
    OK – I don't have this program but I guess it is worth to buy (?)
    Clone your drive with SuperDuper or Disk Utility Restore.
    I found Disk Utility Restore. It says to copy a disk, drag the it from the list on the left. Should I drag the HD symbol in the destination field? What does actually happen when I clone my HD?
    Never repair permissions booted from an older version,, that includes not using the OS X DVD, it will not set permissions properly.
    OK – thanks
    What do you mean by slower. Just startup? how many boot drives are connected? and have you reset startup disk? do you have Windows installed?
    Yes starting up is slower, but funily not always. And the general handling in programs. It's not so slow that it would bother me a lot. I just wondered if I could have the performance how it was in the beginning.
    One boot drive; I guess.
    No, I haven't reset startup disk. How do I do this?
    No Windows installed
    What did you change or install (hardware or software) at the time it slowed down?
    Just the update to 10.5.5
    Always keep a backup copy you can boot from before you apply updates so you can go back easily to 10.5.4.
    Thanks – I didn't do this
    Make sure you have an alternate boot drive used just for doing maintenance and repairs where you can run Disk Utility, Warrior, TechTool Pro. I would also delete manually the two top level /Library/Caches folders along with extensions.mkext.
    Sorry – What exactly is alternate boot drive?
    Some messages from Disk Utility can be ignored.
    Are some messages serious?

  • MAC PRO V1.1 upgrade to OS Mountain Lions?

    Why is OS Mountain Lion not compatible with my MAC PRO, spent $4500.00 and can not upgrade to the new OS.

    Did you look at the dozen threads in the last days and today? not much to add to what has been said already.
    http://forums.macrumors.com/showthread.php?t=1405012

  • New Mac Pro. Lion upgrade completed but OS having problems

    I upgraded last night my Mac Pro to Lion, I bought my machine 3 months ago.
    The machine was already having issues right after the install, its running very slow. Been trying to fix it but cant find whats slowing it down, I have Office 2011 and Skype installed.
    I don't think I have much choice but to reinstall, but Lion does not seem to allow but media to be burned so I can do a clean reinstall.
    I have found on the internet ways to burn the OS, but this only seems to work before the OS is installed. Is there any way to redownload it if you have Lion installed?

    How to Create & Burn a Bootable Mac OS X Lion Install DVD
    Summary
    OS X Lion includes a new feature called Lion Recovery that includes all of the tools you need to reinstall Lion, repair your disk, and even restore from a Time Machine backup without the need for optical discs.
    To redownload the installer on a computer running OS X Lion, press and hold the Option key while you click the Purchases tab. If the button to the right of the Install Mac OS X Lion item doesn't change to "Install" and allow you to download Lion, use Spotlight to search for "Install Mac OS X Lion" on your computer....
    http://support.apple.com/kb/HT4718

  • Questions about Mid-2010 Mac Pro graphics card upgrades

    Hey guys and gals, so I've been searching the web for any PCI-E Mac and Windows Compatible graphics cards. I currently have the stock ATI Radeon 5770. From the sites and resources I've found, I'm set on the EVGA GTX680 Mac Edition but I also heard about the different cards you can use if you "flash" them. I have a few questions: 1. Are there any more recent lists with compatible cards 2. is flashing worth it and how difficult is it. I am moderately tech savey. 3. what websites are trustworthy besides OWC and Newegg.
    Thanks

    User Tip: Mac Pro silver tower (2006-2012) Replacement Graphics cards

Maybe you are looking for

  • Application Runs Under Windows 8.1 But Not Under Windows XP (I Know XP Is Deprecated)

    The problem is with the obtuse error message put out by Windows's program loader. It reads, in part, "..is not a valid Win32 application." The application runs everywhere except on Windows XP. Looking for root cause of the problem. It's a very simple

  • More then 5 key-presses?

    Hi there, I'm trying to re-create a game that me and my friends have been playing quite a lot in the last few weeks. The game is called Kurve, and it's an offline multiplayer game. Up to six players can play the game on one keyboard. The idea of the

  • IN Operator Query

    Hi all, I have table origin which contains city name,which is of datatype varchar2; Am running the query on oracle 10g WITH t AS SELECT 'BANGALORE,BELLARY,SIRSI,HUBLI' colnm FROM dual select colnm from tand am getting output as BANGALORE,BELLARY,SIRS

  • Quicklook doesn't preview .docx files

    QuickLook works great on .doc files but doesn't work on .docx files. 

  • The volume limit screen is stuck on my main screen.

    I cant play music out my iPod but it works fine on the dock. Its driving me mad, because everytime i try turn the volume up it just slides back down again! Please help!!