Mac Pro 15in A few weeks old! black screen when trying to boot windows 7Ult

I have installed Windows 7 ultimate on my mac book pro 15 in, which is brand new! I have OSX 6.2 and Bootcamp 3.0.1.. I installed everything, and updated drivers. Then I closed out of Windows and everything seemed to be working fine. Until I try to boot back into windows, where nothing happens and there is a blank black screen with a white line flashing in the top left corner. The keyboard is unresponsive and so is the mouse. I have to hold power for 10 sec and then hold option during reboot to get back to OSX. I really want My windows 7 to work!!! but Idk what is wrong! I am pretty good with computers and have searched these forums for about 2 hours now. I saw there was a similar problem on the 27" IMacs... but I have found close to nothing on the 15" Macbook Pros. PLZ HELP!!!!!!!

one more thing, the same thing happens when i try to boot into osx, unless i go into recovery mode and erase everything on my second hard drive and eject the disc. I just opened the windows 7 box yesterday, and it is an official retail version, so i am really stumped here

Similar Messages

  • Black Screen when trying to install Windows 7 via Bootcamp

    Have seen many similar questions with not one solid answer.  I have a brand new 17" MacBook Pro with the regular 750 gig grive and a 200 something gig ssd primary drive. Running the latest version of OS X of course.
    Updated all of my software and then opened up Bootcamp and partitioed 40 gigs on the SSD drive for Windows 7. Stuck in the disc when it asked me to and clicked continue. It rebooted then immediately went to a black screen and tahts where it stays. I ahve tried both the 64bit and 32bit discs and it does the same no matter which one I use.
    How do I get windows 7 to install properly?
    Just my luck it says Apple doesnt offer phone support for installing Windows via Bootcamp.

    Try using Boot Camp Assistant to remove the Windows volume, then redo it.
    Waste of time and don't need to - there are Apple tech support articles
    http://www.apple.com/support/bootcamp
    There is/was one directed at the iMac w/ black screen.
    Using an electronic version, an ISO, bought through school, burned wtih Apple Disk Utility - that has to be burned at slowest reduced burn speed 2X to work - won 't boot, installs but fails during or after, various issues. But you seem to have both, therefore retail version of Windows 7 Home Premium.
    Is OS X also on the SSD? 40GB is actually a tight fit for Windows 7 64-bit. I could tell you why but just trust me when you add up page, hibernation, the SP1 update temp space requirment all on top of the 20GB for Windows itself. And then any data, applications, cache files.
    I'd disconnect the 750GB drive.
    There were updates last week.
    http://support.apple.com/downloads/
    "Solid answers" - really?
    A. there is a forum for Boot Camp
    Boot Camp
    Another for MacBook Pro
    MacBook Pro
    http://www.apple.com/support/macbookpro
    And this one? is for workstations (tower) Mac Pro.
    I know some tech articles say Apple only supports installing or using BCA and any issue with Windows is not under their support, though even there the Apple Boot Camp driver support have various issues and more trouble than I would expect or accept to claim "Windows on Mac" can be called supported - it isn't as seamless and of course no hand-holding.
    There is one step, feature added to 10.6.6 to "download" and save drivers to CD or flash memory - that has been broken and DOA (MacBook Air does need USB DVD external driver and that works) but having a full Boot Camp 3.2 on a memory stick and not having to go through 3.0 and 3.1 to get to the current supported version of 3.2? that doesn't work at all. - Which has led to 100x posts over "what do I do?" with it in the broken state it is in.
    This is an Apple SSD, or 3rd party? The 2011 MacBook Pro has had trouble as it should suppport SATA3 and that was what one of the firmware updates addressed.  Performance and lack or presence of TRIM in OS X is another area of concern.

  • Black screen when trying to boot into Windows 7

    Hello everyone.
    Today we've encountered an issue with one of our MacBook Pros with Windows 7 installed. The computer was booted into Windows 7 (it's strictly used as a Windows machine by this particular user) and after a time of inactivity it went to sleep. It wouldn't wake up from it's sleep so we tried a hard boot. At that point we would get the grey screen, the Apple tone wouldn't sound off and it would just go to a black screen (by default we have it booting to windows). So then we reset the PRAM. Now, we get the apple tone and we can boot into the Mac side. But when we try and boot into Windows, we get a blank screen.
    What's even more interesting, if I try and boot into a Windows install disk to do a boot repair, it gives me a black screen. If I even try to boot from a live Linux cd, I get a blank screen! When important thing I then noticed was that the cd spinned for a couple minutes, then stopped. So I began to wonder if it was still loading the OS like expected, but just wasn't displaying it.
    So I booted into Windows, got the blank black screen. Then I went into another computer, fired up remote desktop and voila! I'm in the machine!
    So the problem is this: When booting into ANYTHING other than OS X, the display turns off.
    What can we do?

    Hello there,
    I have a similar problem! Windows 7 shutdown unexpectedly and since that I can not reboot in windows anymore only with safe mode where everything is a mess.
    Also when it's trying to reboot in windows a blue window appears,says something about drivers  and it is counting something (79.78...till100)but  I m not able to read it cause it disappears immidiately and then black screen and then it turns to reboot in mac which works fine.
    I m sorry if I confused you with my english...
    If anyone knows please help!
    Thanks

  • Black screen when trying to boot to CD (using Option or C) on startup

    Hi, everyone. I'm working on a Mac Mini (mid-2011 vintage) with an attached Superdrive (recently purchased). My monitor is an older VGA monitor linked up to the mini using a Mini DisplayPort to VGA adapter (plugged into the Thunderbolt port). Video runs fine, but when I try to boot to CD to try to reinstall OS, and either hold the Option key or hold C when I hear the chime, I never get any video. The screen is completely black. The moment I release Option or C, I get the usual logon screen. So I never get a screen with selection of boot devices and the mini never boots directly to CD. I'm not sure where to proceed with this and don't really want to go out and purchase a Thunderbolt monitor just to see if that would work. Anyone have any ideas that I could pursue? Thanks.

    Thanks for responding. I'm actually trying to set up the Mac mii as my VMware ESXi 5 server (per Paraguin software guide, see http://paraguin.com/2012/01/10/the-mac-mini-vmware-esxi-5-server-part-2-installa tion/
    Nobody following their procedures and posting on their site has had any (reported) video issues, but that was my guess, that somehow video drivers are not being loaded.
    BTW, did you mean "hold the option key" at bootup cause my mac keyboard doesn't have an alt key?
    Thanks. Still looking for other options.

  • My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

    My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
    Will not show up in safe mode, will not show when started from Windows 7 DVD.
    I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
    Can see the PC volume from Mac side with files.
    I've looked at all the online solutions so far and have tried most of them without success. Please help!
    Specs:
    2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,2
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          3.06 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP52.008E.B05
      SMC Version (system):          1.42f4
      Serial Number (system):          7302300GANE
      Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
      Sudden Motion Sensor:
      State:          Enabled

    EDIT: RESOLVED
    For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
    Specifically, the posts by Dunsany and valkyr did the trick.  I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally.  I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
    Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again.  I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time.  Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black.  I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
    Hope this helps someone else!

  • My Mac pro is in off mode permanently: black screen, no light (not even the cable), not sound...just dead! I bought it 3 months ago and this is disappointing. Any advice?

    My Mac pro is in off mode permanently: black screen, no light (not even the cable), not sound...just dead! I bought it 3 months ago and this is disappointing. Any advice?

    Reset the SMC and then test: http://support.apple.com/kb/HT3964
    Otherwise as the other folks indicated, its time for diagnostics / service. Make an appointment with a Mac Genius at an Apple store, contact AppleCare via phone, or contact an Apple Authorized Service Provider for assistance.

  • I get a black screen when trying to watch a movie on itunes

    I have a laptop that I take to work. I am a teacher at a school. When using my school internet, I am able to see my movies in itunes. But, when I take my laptop home and use my internet, I get a black screen when trying to view a movie.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    If images are missing then check that you aren't blocking images from some domains.
    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
    *Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    Make sure that you do not block third-party images, the permissions.default.images pref should be 1.
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.org/kb/Images+or+animations+do+not+show

  • TS3718 I have a black screen when trying to Face Time...iOS is 5.1.1...any suggestions?

    I have a black screen when trying to Face Time ...iOS is up to date..any suggestions?.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • Black Screen when trying to play iTunes Movies PLEASE HELP

    This is my set up. I have an iMac running OS X (10.5) and a mac mini running (10.6) this mac mini is hooked up to my tv in the living room, it also is fitted with an external hard drive (this is where my itunes media folder is located for my mac mini). I enabled home sharing on both macs and they are both authorized to play my media. I recently downloaded two movies on my iMac and transferred them to my mac mini. Now here is the problem. I can play the movies fine on my iMac but when i try to play them on my mac mini all i get is a black screen with no sound. The movie is playing on the mac mini because i see the time bar moving but nothing is on the screen.
    Please help.

    In an attempt to consolidate numerous threads about video problems with Flash Player 11.2.202.228 I've created a new post where I'd like to have people who are still encountering this issue to either post or link to an existing post with their information.
    Video investigation with Flash Player 11.2.202.228
    We're asking for 4 pieces of information
    1. A brief explanation of the problem
    2. Did disabling hardware acceleration fix the issue
    3. A sample URL
    4. A copy of your dxdiag report
    If you've already provided all 4 answers to us, thank you and please take a minute and copy the URL of your post (right click on the highlighted title of your post as shown in the example screenshot below) and paste it as a reply so your input is not lost.
    If you haven't provided these answers, we ask that you take a few minutes and create a new post with the required information.

  • MSI GeForce GTX 760 2GB - Black Screen When trying to load games

    Ok so I've been trying to figure this out the past 2 weeks and cant figure out whats wrong.
    Whenever I try and load a game more my screen goes black and I can hear sound but nothing is is being displayed. I cant task manager out or ALR-TAB out. It just sits there and I have to power down my computer manually.
    I've re-installed the drivers and have tried a different power supply since those are the 2 things I thought it would be and nothing is working.
    Any help would be very much appreciated

    Quote from: flobelix on 18-March-14, 05:51:00
    Uninstall current driver in safemode using >>Driver Fusion<<. After reboot install current MSI driver: http://download.msi.com/dvr_exe/nvidia_33165_v7864_vga.zip
    Did it twice and it still gives me a black screen when going into a full screen on games.

  • Has anyone encountered an "exclamation  point" in a white circle centered on a black screen when trying to edit a photo?

    Has anyone encountered an "exclamation point symbol" in a gray circle surrounded by a black screen when editing in iphoto? 

    Yes.
    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    What version of iPhoto? Assuming 09 or later...
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • I just had my hard drive replaced, and now when I am online get a black screen when trying to open a pdf. Any help would be appricated

    I'm getting a black/blank screen when trying to open a Pdf. off the internet. Can some one please tell me what to do to fix this? I just had my hard drive replaced and never had this problem before. Thank you

    try downloading adobe acrobat reader and installing it......

  • Black Screen When trying to get to the boot menu?

    When i try going to the Bootmenu it hangs on a black screen ive taken out any hardware unpluged every thing from the usb slots front and back and it still hangs on a black screen when i try to go to the bootmenu 
    heres the link to my pc 
    http://h10025.www1.hp.com/ewfrf/wc/product?product=3339301&lc=en&cc=us&dlc=en&docname=c00864946

    Hi,
    Based on your other posts it appears that you have made some hardware changes. Is that correct? If that is correct then start backing off the changes until you can isolate the issue.
    Since this is a new thread, please post the HP product number and operating system for your PC so that the members of the community can better assist you with your questions and issues.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • I recently bought a new Mac Pro within last few weeks and have notice many

    software failures....way more than i recall ever having on my powermac g4 ffrom a year ago...
    one of my most frustrating appl,icatioins now, is my Office osx (not the new 2008) version...this was brand new when i'd originally bought my powermac g4 back in late 2003. io was reassured by the Mac specialists that that version of mac osx would work find on the new Intel Mac Pro...yet consistently by 100% every time i try to directly start any of the Office apps, word, excel, powerpoint, etc...start up fails and i get the error saying this program has encountered a prob, blah, blah blah, and do i want to relaunch, report or ignore...i've tried relaunch with 0 success, and have reported numerous times now. HOWEVER....when i douible click on a file recognized by those apps, like a .doc, or .xls, then the app opens flawlessly as it should when i try the other way.
    Aside from that, i seem to notice significantly less stability with software on this machine, though significantly less consistently in comparison to the office issue...
    is this something others are or have been experiencing? is it an Intel issue? or a Leopard Issue? i'm doubting very much its an apps issue since the crashes have happened over numbeous apps...

    That rules out the typo and MA. 2GB RAM is minimum, and Mac Pro needs more, but not that it can't or won't run simple programs adequately.
    It does need 4 DIMMs to improve balanced symmetrical memory and bandwidth, and 8 DIMMs to realize full 7.5Gbps is all.
    Often problems with Office deal with old prefs and configuration and more OS X related than Mac Pro.
    http://discussions.apple.com/forum.jspa?forumID=1225
    http://www.macintouch.com/reviews/office2008/

  • Windows 7 64 Bit black Screen when trying to got back to desktop

    Hello,
    just bought my a new Imac and isntalled Windows 7 64 bit without any problems.
    When running a game under windows and i try to go back to the desktop with ALT+TAB or the windows key the screen gets black.I can still hear the game sound but i am not able to go back to the desktop or back to the game. The only solution is to hardboot (power on/off) the whole system. It has to be something with the 4850 HD drivers i think, i tried already to update them from the ATI homepage, no changes.
    Has anybody else experienced the same problem?
    Kind regards
    redsun100

    I recently had a problem that was similar but with OSX 10.6. It may be a long shot, but have you considered that the BIOS in the Apple Mac may be the problem?
    Windows / Mac / Linux, etc... all require a series of components to unanimously agree that everything is fine and funky. If one does not, then, dependant on the problem it can either Freeze, crash or cause instability problems. At the core of any OS is its link to the base hardware, which is to all intents and purposes the BIOS.
    So coming back to the problem, when I upgraded my white Macbook (4,1 version) to 10.6, I wanted to find out if it would work with the 64bit kernel of Snow Leopard. To the best of my knowledge the machine has a 32bit EFI firmware. Initially it was all bunnies and flowers in Mac-land and everything was happy with the 64bit kernel. However, this is the 'But' that usually surfaces, this was all well and good till it went to sleep. When I tried to wake the machine, things happened but it failed to reinitialize the video hardware, so a black screen and an even more puzzled look on my face. A hard reboot would solve the problem, but repeating the sleep function and putting the machine to sleep, repeated the video initialisation problem and I was cold rebooting again. Before you all come out of the wood work and say that this machine is not authorised by Apple to run 10.6 as a 64bit version, I know and did it as a test, by hacking two files in the system - It works, just don't let it sleep on you or you'll be pulling the plug. My needs for a 64bit OS are due to Adobe Lightroom and its memory problems under 32bit, which seem to be largely neutralised with the 64bit kernel. As a small side note, my newer 13.3" MacBook is all bunnies and flowers in Mac-land, even coming out of sleep mode.
    Now it suggests that in the dreaded Black Screen of Death, that seems to be popping up with an alarming regularity, may have more to do with the BIOS in machines not properly sorting the peripherals and components on the PCI and PCIe buses when something radical happens. As you know, Windows Vista did some real funky stuff when switching video modes or jumping between one full screen program and the desktop. Just remember Vista did some strange video funkiness when bringing the UAC to your attention. It reminded me of the weird stuff ATI did with their 9800XT & Pro video cards when windows first started, Black screen and then reinitialise.
    In your example, I believe that Direct X 10 needs to switch from the game or application to the Desktop UI. As normal windows applications are not full screen they work within the framework of the Direct X 10 and UI, but when you deal with full screen that's a different matter.
    For years we have all been 32bit and happy, but then the switch to 64 bit hit the shelves and all of a sudden things ain't so good. After all the PC BIOS scene is not exactly standard fair, and in most cases the versions that float around on the Internet are all different.
    I would suggest (If you can get a copy) you try to see if you can get a 32bit version of Windows 7 and see what happens - although some of the draconian measures that Microsoft go to lock you in can be frustrating, so my apologies if this is not possible. Also have you checked that the Mac has a 64bit EFI BIOS and that it is able to support this type of OS. If it does have 64bit BIOS it is generally Apple who chained their OS by restricting certain machines with capable BIOS, not the actual Hardware that is the problem. So if you have a 64bit capable BIOS then I can only think you need to check for an update or something.
    The other problem is that everything Apple, but the Mac Pro, is tightly controlled by Apple. On the Mac Pro, it is feasibly possible to change some of the components in the system, all other machines are fixed. Take for instance the Video BIOS, can you find any updates or files - unless Apple deign to release it we have to suck it. After all they are in the business of supporting their machines and OS combinations, not the other Operating systems out there.
    Anyway just my ten pence worth. Hope it helps.

Maybe you are looking for