Mac pro 2010 boot camp wont connect to internet

I tried everything possible, I installed windows vista 64 bit edition, everything else works great but the internet wont, when I go to device manager it cannot identify one of the network adapters. I load the boot camp drivers already, and updated it to , it didn't work. DOES ANYONE KNOW WHAT DRIVERS I NEED TO DOWNLAOD FOR IT TO WORK

This is a Windows issue. You can try your post in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237

Similar Messages

I have put Windows 8 on my Mac pro, in boot camp, no I am unable to load drivers

I have put Windows 8 on my Mac pro, in boot camp, no I am unable to load drivers to get it working as it should. I have tryed Winows 7 Con, in setup.

Did you download the drivers to a FAT32 formatted USB drive per the instructions?

HT4818 Boot from laptop's Windows Hard Drive in Mac Pro via Boot Camp

I have a work laptop that is on Windows 7. It's a work hard drive so I don't want to mess with it (particularly as it's encrypted). I basically want to use it on my Mac Pro rather than my piece of junk standard issue laptop when I'm working from home.
What I would like to do is pull the drive out, put it in my Mac Pro and boot from it using Boot Camp. Guidance I've seen so far talks about not being able to use an external drive but having to partition an internal drive. However, if I've got everything on a separate drive (i.e. my laptop's drive), will this work?
Thanks!

Thanks for the quick (and no nonsense) response!

Overall happiness with Mac Pro and Boot camp/XP

Hi all,
I am a current Windows user and need to upgrade my home computer soon. My wife (teacher) has an imac g5 at home an loves it. I am thinking of getting a refurb mac pro when Leopard is released and use Boot Camp with XP Pro. I am not a big gamer so that is not a concern. I am just checking to see how happy others using this configuration are, and maybe reccomend a configuration (separate hard drives etc.)
Thanks to all for any feedback.

I love mine. Its quiet, launches native apps practically instantly (CS2 takes a few seconds longer), and performs all the system instensive stuff I ask of it quickly and without complaint.
And while it kills me to use Windows anymore, I need to feed my old gaming habit for which Bootcamp is great. I also need to do web browser testing for IE, and Parallels makes it super convienent.
If you have need of a system this powerful, I can totally recommend it. Without knowing what you're specific needs are, the sort of "all-around" config would be:
2.66 Ghz
2 GBs of RAM minimum (third party RAM is cheaper).
Buy extra drives if you need the storage space. But don't buy these from Apple. Western Digital drives are good and quiet.
Airport and Bluetooth options are pretty self explanatory.
If you don't game, and you don't use GPU sucking apps like Motion or Maya, you won't need the video card upgrade.
I could give you more specifics if you tell us what the system will be used for.

Mac Pro/ Leopard/ Boot Camp/ XP and 2 ATI Radeon XT1900 ????

I recently went surfaced from a hardware nightmare with my Mac Pro. I need 4 monitors on the XP pro/ boot camp side and was unble to do so using an added ATI XT1900 to my Mac Pro. The drivers would not successfully load. Also the added card buggered the original card. After uninstall and some trouble shooting I was able to get back to a functional configuration with 1 card.
Now that Leopard is out with the new boot camp.... does anyone have experience (successful) with 2 video cards (ATI radeon xt1900) in boot camp/ XP pro??? I dont want to go through me last experience as my job depends on the XP/ boot camp working.
Thanks in advance for your help.
Dan

Correct me if i'm wrong, but the original poster didn't ask or mention anything about Crossfire. (though as a side note, I have read that some people have sucessfully got their 7300gt's into SLI by purchasing a special dongle and downloading a hacked driver.)
And as to whether a user would need two or more monitors for their needs is completely up to the them if it fits their needs, the way i see it the term 'waste' is subjective depending on the user and his/her needs.

Cannot Complete Installation of Vista with Mac Pro and Boot Camp

I only have one hard drive with my Mac Pro, and I partitioned the drive into two sections with boot camp and restarted with my Vista 64 bit Ultimate CD.
I have tried formatting the partition with Vista and it still gives me the dreaded error message of "windows is unable to find a system volume that meets its criteria". I've tried deleting the partition during installation, and making a new partition with Vista, reformatting, then restarting the computer. Same message.
I don't know what to do. I've tried like mad searching for topics like this one here, but every one of them deals with installing vista on a second dedicated hard drive on the Mac Pro. I only have one. How do I get this to work?
Please help if you can. I would REALLY appreciate it. I'll be watching the thread. Thank you!!

Loyalty4Life wrote:
Thank you for your reply! I'll be here all night.
I have the 3GHz Dual-Core Intel Xeon processors. I tried installing Vista ultimate with my 32 bit software, but I still get the same message (I own both legally, btw).
Thanks for your help.
Several things to do:
Run OS-X Disk utility and repair the disk if necessary, and file permissions.
Be sure your HD has the GUID partition scheme and if it has SMART that it's OK
Zap the PRAM
Be sure you are logged in as administrator when creating the BC partition and starting the installation of Windows from Leopard
When I installed Vista Ultimate 64-bit, I was using BootCamp beta, 1.2 or 1.3. I created the partition with BootCamp Assistant.app as you did. It's a 60GB partition that I formatted with NTFS with BC.
After starting the install in Tiger, I then simply inserted the Vista 64-bit DVD and that was it.
It just installed.
Ditto with XP-Pro on my other MBP. Zero problems with BC. It was also done with a beta, BC1.0.
I have never installed Windows using Leopard. When I updated to Leopard from Tiger nothing changed, but there seem to be more problems with Leopard and BC2.0 than there were with Tiger and the beta versions.
There are no requirements about legality until after the OS is installed, so that's a moot point.
There are some install DVDs that are in ISO format and they won't work, but it seems that yours is working but not finding a suitable volume.
You might try reformatting the BC partition with BootCamp assistant as FAt32 and seeing if that works, but you are limited to 32GB if you do that, but it would be a good test. Vista should then format it into NTFS.
Be sure that your Leopard OS is fully backed up because stuff happens when you keep fooling around with partitions.
Also look through this forum for similar problems.

Mac Pro w Boot Camp - SATA, AHCI, EFI, BIOS - what can we do? (Cross Post)

I am trying to centralize the discussion of this particular issue which prevents the Mac Pro from being the ultimate cross platform system.
Please refer to the original thread located at:
http://forums.macrumors.com/showthread.php?t=225349
Mac Pro 2.66 Mac OS X (10.4.7) 4 x 512MB RAM Modules, Boot Camp 1.1

I agree with all the posts. I did the whole thing again to 1.1 and find this system base device and the sata drive speed UDMA issue to be serious for cross platform. What I would like to know is what is the performance with the sata on the Mac OS side. I did a encode of video and it
didn't seem to be much faster than my G5 Dual 2.0 processor machine. I would like to hear from others on their video encoding to see if this sata issue goes throughout the whole machine. I'm dissappointed with the winxp thing. 1.1 is better and did alot better install, but I do realize that it is beta. Non the less, the sata issue is huge. What makes it worse is that Intel won't even give a little bit of support, basically they said to me that it was all Mac problems. I hope there are many changes, in the mean time the cross platform is not working for me. I did get autocad to run reasonable, but nothing like it should with the power under the hood.
Mike in WA
mac pro Windows XP Pro

Mac Pro and Boot Camp Woes

I had installed the retail version of leopard yesterday... Which i might add that I enjoyed thoroughly! However, this morning I had a hankering to play some Windows based games. So I went ahead and used boot camp.... Everything seemed to start off swimmingly with repartioning my drive. (Also took heed on keeping the new partition as FAT32 and not NTFS) Got to the point where Windows was copying files necessary for setup and finished. Rebooted my computer to begin setup and of course the cd was still in the drive so I got the infamous "Press any key to boot from CD" so i waited and received the msg "DISK ERROR" my system was completely locked up. So i held the power button in for 5 seconds to shut off the computer and tried restarting it. Now all i get is no video signal and the steady flashing light on the front of the Mac Pro (fans and drives are powering up). I've tried the following to resolve the issue (all resulting in the same black screen):
1) Held down "C" and booted up with my leopard install disc in the drive
2) Held down the option button to specify the boot device
3) Removed internal battery and held the power button on for 5 seconds to clear
4) Resetting the PRAM with command, option, p, and r keys pressed
5) Tried a different monitor (off another working computer)
6) Held down the shift key while booting up
No success! Like i said before i hear the drives spinning and fans humming just fine. Does anyone have any suggestions?

With a Mac Pro, and with a new OS... I would have advised to create your Windows partition on another disk drive and not on your boot drive.
I would also then pull either or both OS X drives (assuming you kept Tiger on another drive somewhere).
Microsoft would like to see customers move to the NTFS, it is a better file system, use FAT for when you need to share files, or use MacDrive7 even. Took heed not to use NTFS? don't understand. I have to use it of course (Vista) and I have one small 100GB FAT volume. Now most of my files are on NTFS (readable from OS X side if needed).
Did Windows update or never got that far (there should be a lot of updates, patches, etc) and at some point you would need your Leo DVD to install the Apple BootCamp patches, drivers, and services.
I prefer using the SMC Reset button - not PRAM reset.
Probably another X1900 issue?

Mac Pro does not stay consistently connected to internet

Okay, I will try to be as detailed as possible...
I recently moved and had a new internet connection set up. The company replaced the modem and router I previously had (against my will) with their modem/wireless router combo. My Mac Pro has a wired connection, while all other devices (iPods, iPhones, PC laptop, etc.) in my home are wireless. The wireless devices all work consistently fine, however, the Mac does not. Typically, while having network diagnostics open, I reset the modem and everything is fine. After a few minutes, or after closing diagnostics, it no longer works again. Today, even after restarting the modem and getting all green lights, it doesn't seem to connect at all.
I have Windows installed under boot camp and the connection there works perfectly fine. This tells me there is an issue within my OSX settings, and not the equipment or connection. After learning this, my cable company's tech support basically told me to get lost and contact Apple. Though I'm paying them an obsene amount of money for crappy internet service, they really could care less about ensuring that their products at least work with their customers' equipment (they even told me they're tech support is unfamiliar with OSX).
I'm guessing something in my network settings is causing this, but I don't have enough in-depth knowledge about this particular subject to troubleshoot it myself. I'm desperate for a good samaritan to help as my business can no longer operate until I have working internet access.
PLEASE HELP ME!!!!

Disable the router function in the modem they provided and you can continue to use yours.
Modems, esp. cable, you may be able to return it.
There may be a list of modems that are compatible on their service - even some that aren't listed will be like SB6121.
And are you paying a monthly fee for their modem?
Others have "commented on" the Mac Pro not negotiating as well. But it was when you used your own router, right ?
I am totally sold on
having modem and router separate
Netgear routers - got the WNDR3400v2 last year and thinking about the next level, the R6300 probably this fall. I can even configure and monitor from iPad, iPhone, Android and their desktop app (Win and Mac).
I wonder if like my ISP they have a support forum, I'd be lost w/o. They can check the modem remote login and see what the modem is logging (over my head).
Had some odd electrial spike - 3x in a minute going onto UPS but not an outage. Spikes? left their modem 50% function and semi-crippled. I had to reset modem or it would reset itself I should say every 5-10 minutes at times. ISP could not tell until they got there. Then they found the modem was unable to connect to their activation page and had to replace it and the drop point on the telephone pole 70 ft away.
I now keep a spare modem of my own (SB6121) and continue to use theirs, Cisco.
You do have the ability to use your router, just not double-NAT is all.

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and somehow it crashes the mac side peridoically. I am told I need to "clean" it and reinstall lion using the recovery drive. will that delete the windows partition too??

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and now the mac side crashes/freezes periodically, especially iphoto. I am told by the genius' that I probably need to "clean" it and reinstall lion using the "recovery drive" which resets everything back to default and reinstalls the lion operating system. My question is will this also delete the "windows" partition drive and all that data too. If so that will be a huge pain in the ___ to back up and reinstall boot camp and windows. I want to shoot the lion.

There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

Why is the boot time on my mac pro 2010 slower than my 2010 core 2 duo 13 mbp?

Why is the boot time on my mac pro with clean install of lion around 34 sec on my mac pro 2010 2.8 quad core, when it is only around 17 sec on my 13 mbp 2.67 core 2 duo?
The mac pro uses around 13 seconds from i hit the power button til i hear the chime and see the grey screen.
Is it because it uses time to find the wireless keyboard, trackpad and cinema display?
Mac pro has 16 gb ram and 240 gb ocz agility 3 ssd, macbook pro has a intel 120 gb ssd (320 i think) and 8 gb of ram, so the mac pro has more umpf....

Well it might take a little longer since POST (power-on self test) needs to check more memory.
But try doing a smc and pram reset and see if that helps.

Mac Pro 2010 triple boot (Snow Leopard + Windows + Yosemite)?

Hello All,
This is my first question here, I'm usually trying to find the answer myself, but this time I wasn't able to find anything clear enough to me. So I hope that someone can give me clear and easy to understand answer. I must also tell that my English isn't perfect, but should be more than good enough for communication. :-)
I have Mac Pro 2010, 4 core CPU 3.2 GHz, 6 GB RAM, ATI 5870.
HD Bay 1: WD Black 1 TB - Boot Snow Leopard 10.6.8
(Just to add: I am happy because when I bought my Mac it came with 10.6. I am happy with it, it's stable, and I want to keep it as it is)
HD Bay 2: WD Black 1 TB - Boot Windows 7 x64 (bootcamp, full drive)
(I am very happy how it works, so I want to keep it as is)
HD Bay 3: WD Green 2 TB - for all kind of data storage
HD Bay 4: Was empty until yesterday, but now I have another WD Black 1 TB to put it in - still not formatted.
I would like to install Yosemite on that new drive (first I was thinking about Maverick, but then I saw that some new applications will not run, like Final Cut Pro X, new MS Office, still in beta, plus I would like to use iMessage, etc.), and keep everything else as it is now - absolutelly untouched.
• Is it safe to do it, or I can make some mistake and lose Snow Leo and/or Windows?
• Is position of the drives important? Should I, for example, put new drive in a Bay 3, and move data disk to Bay 4, or it doesn't matter?
• When I download it from App Store, and when installation starts automatically, do I have an option to select to keep untouched everything I have now?
(I don't want even to collect any data from Snow Leopard, like mail settings, bookmarks, applications installed - absolutely nothing, it should run as a totally new comp and without any interaction with Snow Leopard, except ordinary hard disk access, like any other hard drive)
• Will my bootcamp drive be safe, I will still be able to boot from it?
I was also thinking about this:
I saw that it is possible to make bootable USB flash drive with installation. If I do that, and if I phisically unplug all other drives except a new one, then do installation, shut it down, and plug back all other drives, will everything work? Will I have triple boot when I press option key during start-up? Does all this makes sense at all to you?
Finally, does anyone have some experience with Mac Pro 2010 + ATI 5870 with Yosemite? Is it smooth, no problems with graphics or some other things?
I will really appreciate some answer about all this.
Cheers!

Some tips about Yosemite and Core Storage from MacIntouch Reader Reports on Yosemite:
Ric Ford [MacInTouch]
Yosemite's changes have led to questions and confusion about disk formatting and partitioning issues, backward compatibility, and dual-booting Mac OS X 10.6 and Yosemite. Below are a few notes on these issues from an email discussion (questions, tips and clarifications are welcome).
Core Storage changes debuted in OS X 10.7 Lion, with Apple's new FileVault 2 whole-disk encryption and hidden Recovery Partition.
Generally, running OS X 10.7 and up shouldn't corrupt or convert the HFS+ partitions used by pre-OS X 10.7 systems (still supported in later OS X versions). There are, however, a few special cases to beware, and this is where things get confusing. Here are some specific issues:
1) FileVault 2 encryption and "Fusion" drives both depend on Core Storage, so applying those to any partition will render it inaccessible by pre-OS X 10.7 systems.
2) Yosemite's installation process silently converts a partition to Core Storage, incompatible with Mac OS X 10.6 and earlier. Ars Technica's review describes this issue.
3) Running Disk Utility's "repair" function in Yosemite against a Mac OS X 10.6 (HFS+) partition has caused problems in some cases, such as making the Mac OS X 10.6 partition unbootable.
(A search for Core Storage on MacInTouch will turn up more discussion and tips.)
See also:
Core Storage [Wikipedia]
OS X Mountain Lion Core Technologies Overview (PDF) [Apple]
OS X 10.10 Yosemite: Installation [Ars Technica]
File system changes in Lion [Ars Technica]
Can't remove Core Storage from hard drive [Apple Discussions]
How To: Disable CoreStorage on Mac OS X 10.10 (Yosemite) [Symantec]
http://www.macintouch.com/readerreports/yosemite/index.html#d16apr2015

New Macbook Pro Wont Connect to Internet

I just got a Macbook Pro today and it wont connect to the my wireless connection. The only thing I can think of is when I was in the start up it ask what I connected to the internet with and because I was not within my own network I press "This computer does not connect to the internet" option. How do I change this?

I'm using a Linksys WRT54G and ran into these exact symptoms today. After downloading all available updates, dwiddling with a bunch of stuff I didn't really understand (but that's never stopped a hacker like me), getting frustrated in trying to figure out how to either make a reservation with a local Mac Store Genius or talk to a real person at Apple Support I tried unplugging my wireless router and resetting it. My computer came up and is now working fine... go figure.
I've got to admit that I was ready to panic after looking at the discussion board. I'm an old PC person and now consider myself a "convert" to Macs. Glad it didn't let me down.
MacBook Pro 15" Mac OS X (10.4.8)

802.11ac not recognized on Windows 8.1 Pro under Boot Camp.

I just installed Windows 8.1 Pro under Boot Camp. The issue I am having is that the 802.11ac network is not recognized in Windows. Windows only recohnizes the 802.11n network. When I boot up OSX Yosemite, It works as usual. Anyone else have this problem?

8/8.1 will install fine but there's some stuff you need to do before starting to ensure no issues
purchase a retail 8/8.1 license
use only a USB2 flash drive
get a clean 8 or 8.1 ISO
newer machines are more selective with the ISO for some reason (ISOs that worked to install Windows on many different older Macs would not work)
if you've made lots of changes, hacks and adjustments trying to get this work on your own, you should clean install OSX first, do not restore from time machine and start at step 3 to get Windows installed, you can go back later and copy files back to OSX
if you want to try without clean installing OSX, here goes
open boot camp assistant (bca) and choose option 3 ONLY if it reads 'remove/delete' Windows
open disk utility (du) and confirm that your HD now only has 1 single partition ('macintosh HD' unless you've renamed it)
restart machine and do a PRAM reset
open du and repair permissions TWICE
open bca and choose all 3 options (create, download, install)
from here, the process follows the standard boot camp instructions (http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf) but pay attention to step 3 where you do have to manually reformat the boot camp partition
clean ISOs
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
http://getintopc.com/softwares/operating-systems/windows-8-1-download/
if you are trying to clean install 8.1, google clean install 8.1 with windows 8 key for steps like this
http://forum.notebookreview.com/windows-os-software/735517-how-install-windows-8 -1-clean-your-windows-8-upgrade-key.html

I bough a Mac Pro 2010 second hand and deleted all the files without backing up now is asking me for the Apple ID of the person who installed maverick,any ideas

I bough a Mac Pro 2010 second hand and deleted all the files without backing up now is asking me for the Apple ID of the person who installed maverick,any ideas

If the Mac's firmware was updated, you can try this Internet Recovery:
Hold down Command + Option + R during restart or bootup; hold until you see a spinning globe (takes up to 10 minutes). Once in the Utilities window, use Disk utility to wipe the drive, then return to the window and choose to reinstall OS X. If that works, the OS will be installed without being tied to an Apple ID.
FWIW, if the firmware was updated, you will not be able to use the Snow leopard disk to install - I just did several tests and it does not work. You can, however, possibly install the SL onto an external drive and then clone it to the internal or (if you have a clone), boot from that and clone it back - I just tested that as well.
If the firmware was not updated, then you can use the SL install disk.

Mac pro 2010 boot camp wont connect to internet

Similar Messages

Maybe you are looking for