Mac Pro 3,1 with 5770 problems after sleep with Lion

Hi,
with 10.7.3 there was a fix for older iMacs with the same issue on an HD 2600 but my mac Pro with the 5770 has the same problem.
Is the Mac Pro user less important for Apple?
My card works fine afer restart. No issues and performance problems (cinebench scores 37fps) but when i sleep my mac and then wake it up all graphic UI things are creepy. There are laggy animations and so on and the speed in Aperture is decreased to a minimum. Cinebench scores after wake up only 16fps.
I bought the card to INCREASE my speed (formerly i have had the HD 2600 built in) and for now, my 249€ is spent for nothing. I dont want to restart my Mac everyday.

So, i have set up a completely new system with all updates to 10.7.4 and the problem already exists.
I am not sure, if this was a problem with Lion or with the ATI 5770
Not really nice

Similar Messages

Mac Pro intermediate black screen at boot after installing mountain lion

I have a 2008 Mac Pro tower, but since installing Mountain Lion I now get a random black screen at boot. Unplugging the apple cinema 20' power supply for 15 minutes seems to clear the fault. Have had no such problems with other OS until Mountain Lion, seems OK when booting to Snow Lepoard on my other drive?
Anyone have the same fault?

Thanks for trying the help! I tried every version of start up, but with no screen it was no good..
Finally solved the problem, it was the ATI HD 2600 XT graphics card that was dying a very slow death.
Replaced it this morning with a GT120 Nvidia.
Anyone with this card should Google it, as apple did a big recall on these..
http://www.itproportal.com/2011/02/21/apple-extends-warranty-mac-pro-video-cards /

10.4.9 - Problems after Sleep with Logitech Mouse

Hi there -
since installing 10.4.9 I'm having problems with my Logitech Mouse after waking up my iMac G5 from Sleep.
The mouse will behave erratically, almost as if buttons are continually being pressed. For example, if I click any items in the Menu Bar then it behaves as if I immediately clicked again.
This weird behavior will continue until I hit the Apple or Command keys on the keyboard, after that all is fine.
I'm using the LCC drivers 2.1.3 and under 10.4.8 all was fine.
Anyone else seeing this behavior? Anyone have any tips how to fix this?
Thanks,
Tim

Hi Tim Tschirner;
I had something similar happen with my Mighty Mouse after the last security update. One of the switch started misbehaving immediately after the update. I took the mouse into the Apple store and discovered that is was a problem with the mouse and not the update because it did the same thing on their Mac.
Have you tried the mouse on another system to be sure it is not a problem with the mouse?
Allan

Mac Pro fails to find ethernet connection after sleep

My 2.66 Nehalem MP goes to sleep just fine. The problem is every time I re-awake the machine, it never finds the ethernet connection. I have to log out and log back in for it to reacquire the connection.
This isn't a problem when I sleep on the Mac side so doesn't seem to be purely hardware related. Any ideas what's wrong?

Sorry, I realized I posted this in the wrong place ... moving posting to the networking secgtion.

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?

When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?

Whatever the problem is you no longer have a bootable system. You need to try reinstalling OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How much real world difference would there be between the 1600MHz memory of a 4,1 Mac Pro and the 800MHz memory of a 3,1 Mac Pro? My main app is multitrack audio with Pro Tools. Thanks so much.

How much real world performance difference would there be between the 1600MHz memory of a 4,1 Mac Pro and the 800MHz memory of a 3,1 Mac Pro? My main app is multitrack audio with Pro Tools. Thanks so much. The CPU speed of either one would be between 2.8GHz and 3.0GHz.

What are the differences.... firmware and build, there were tweaks to the PCIe bus itself. As a result 3rd party cards and booting is better.
Support in 5,1 firmware for more 56xx and W35/36xx processors. Also memory timing.
The 4,1 was "64-bit boot mode optional" and 5,1 was default. I don't know if there are changes but I assume so, even if it is not reflected elsewhere or in version number.
I don't know what the prices are but 2009, to buy one today, when the 2010 is $1800.
The 2008 of course was test bed for 64-bit UEFI and it sure seems even Lion and then ML are not as well engineered - outside of Linc who would be the least likely to have a problem.
I would assume 2010 has better support for 8GB and even 16GB DIMMs as well as for 1333MHz.
Nehalem family had only come out in fall 2008 and a lot of work went into making improvements well past 2009.
If you remember, there were serious heat problems with those and 10.5.7+ up thru 10.6.2 even with iTunes, audio, and hyperthreading and cores hitting and staying in 80*C range. That I assume was both poor code (sleep does not mean poke and ask constantly) as well as changes in SMC and kernel improvements, to work around. Microcode can be patched in firmware, kernel, by drivers and by code, but it is best when the chips and core elements don't need to be.
If someone is stretched, and can get 2009 for $1200 it might be a fine fit. That year offered the OEM GT120 which isn't really as nice and matched for today both OS and apps that rely on a GPU. And for odd reasons two such 120's don't work well in Lion+ but that is probably minor. Having the 5770 is just "nicer" though.
There are some articles about trouble booting with PCIe SATA/SAS/SSD and less trouble with 2010. Also support for graphic card and audio I think was one of those "minor" 5770 related support issues. But shows some small changes were made there too.
I wish someone would come out and pre-announce DDR4 + SATA3 along with PCIe 3.x (for bandwidth and more power per rail) along with say Ivy Bridge-E socket processors was going to be this summer's 3 yr anniversary and to replace the 2010 designed motherboard. But that is what is on Intel's and others drawing boards simmeringn in the pot.

I have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

i have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

Check that your computer is compatible with Mountain Lion.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable DVD/USB stick to install using this free program.
Bootable Drive DVD or USB Flash Drive – Lion Diskmaker
Our 2 computers haven't experienced any significant problems, even though others have. I find it much better than 10.7 Lion, which I used for a week before reverting to 10.6.8
Mavericks is supposed to be released this fall, so you may want to wait.

I have an early 2008 Mac Pro, which has re-booting problems. Also what does the spinning beach-ball indicate?

Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
Robert

When you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Problem with Dreamweaver CS4 after upgrade to Lion

I am having a problem after upgrading to Lion, with my Dreamweaver CS4 . When I try to use the bold button the text completely dissapears from the screen in design view The text is still there as it shows up in preview and also shows up in code view. Has anyone else had similar problems since the upgrade? and is there going to be a fix for it.

http://www.adobe.com/products/creativesuite/faq.html#lion-os
There are a number of known compatibility issues with Creative Suites and Lion
http://kb2.adobe.com/cps/905/cpsid_90508.html
Can't see your specific issue mentioned though.
Perhaps report it to Adobe via the Bug Report form giving full details
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

GoToMeeting says java disabled inFirefox 4 Mac OS 10.5.8 (same problem as person with OS 10.6)

GoToMeeting says java disabled in Firefox 4 Mac OS 10.5.8 (same problem as person with OS 10.6)

So is there an answer to this problem? My GoToMeeting works just fine in Safari!!!! Why does it jut happen in Firefox???

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

I tried to put a copy of windows xp on a dos partition on my mac pro and now cannot access the hard drive with the latest maverics on it

I tried to put a copy of windows xp on a dos partition on my harddrive partitioned for mac pro os x maveriks 10.9.3 but with a dos partition fat32 for the windows; but when I tried to reboot I cannot now access the hard drive. Sometimes I get a white page with a question mark and sometimes I get a black screen with a blinking curser at the top. I have a backup mac with lion which I am now using to comunicate.

Windows XP has a notorious reputation for crapping on multiple partition boot blocks, including in your case, OS X.
There are three options.
Boot into Recovery (Press and hold command+R at boot)Choices
Restore from Time Machine backup
Retrieve and install current version of OS X from Apple Servers
Boot into Internet Recovery (Press and hold option+command+R at boot)
Requires Mac that shipped with OS X Lion or later
Retrieves and installs original version of OS X that shipped with the machine
Must update to Mavericks again
Restore user data from Time Machine
Apple Retail Store - Genius Bar appointmentSee if Apple will reinstall OS X Mavericks for you
When you resurrect your machine, follow Eric Root's advice about Boot Camp, or a Virtual Machine. Boot Camp v5.1 on Mavericks no longer supports Windows XP, Vista, or Enterprise versions of Windows 7 or 8.

Mac pro 8 core early 2008 problem is you have to unplug

Mac pro 8 core early 2008 problem is you have to unplug for 2-3hrs before using again.

Overheating? Install a temperature monitor like iStat Pro, iStat Menus, Temperature Monitor, Hardware Monitor, etc. and see if you are overheating.
When was the last time you blew out the dust from inside your machine?
I don't understant the "unplug" statement. Do yo mean just turn off?

HT3964 Mac pro 8 core early 2008 problem is you have to unplug it for 2-3hrs when you finish work so it will turn on effortlessly again

Mac pro 8 core early 2008 problem is you have to unplug it for 2-3hrs when you finish work so it will turn on effortlessly again. ANY SUGGESTIONS?
Thanks,
Lou

Overheating? Install a temperature monitor like iStat Pro, iStat Menus, Temperature Monitor, Hardware Monitor, etc. and see if you are overheating.
When was the last time you blew out the dust from inside your machine?
I don't understant the "unplug" statement. Do yo mean just turn off?

Mac Pro 3,1 with 5770 problems after sleep with Lion

Similar Messages

Maybe you are looking for