Mac Pro 4,1 SATA for OS and RAID SAS for data?
Hello, Can I setup a new Mac Pro with two SATA drives for the OS and install a RAID Card and two SAS drives for data?
Or do they all have to be SAS or SATA drives in the machine? Meaning I cannot mix SATA and SAS.
Thanks,
Dean
Even MacWorld magazine liked the OWC drives.
If you are serious about using an SSD drive, they are generally too small for, and do not give enough speed improvement to, extensive documents, movies, pictures, Tunes, and so on. You should consider moving the /Users directory to a traditional Hard Drive.
Blocks on SDD drives can sustain a finite number of writes, thought to be in the neighborhood of 10,000. Some Cloning software is thought to do an abusive number of writes during cloning, so it may be better to install the System from scratch onto your new SSD.
I am an advocate of occasionally consolidating free space on an SSD drive and Zeroing it. Since these drives tend to be organized internally as really big blocks, eliminating small "free" blocks (with leftover data in them) may allow some drives to do fewer slow Read-Modify-Write cycles. This practice is, at best, controversial.
Similar Messages
-
Does my new mac pro retina come with antivirus. And, for how long
does my new mac pro retina come with antivirus? And, for how long?
Yes it does.
It's called OS X Lion - fully updated.
There are no known viruses for MAC OS.
Your current OS is your best protection
If however, you want to feel more secured, download ClamX AV and do a scan once a week to give you peace of mind.
Good luck -
My husband was trying to reload and delete printers and he some how reset many settings on his mac book pro - how does he go back and set everything for earlier today
As Terence said you're experiencing a kernel panic. Boot into your System install disk and launch Disk Utility from the Utilities menu in the first window after the language selection window. Repair the disk. If DU finds problems and runs repairs do it a second time and then reboot.
-
On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?
I managed to boot the computer and get the desktop to show. I now have a "repaired" computer. There are several problems that have cropped up. One is that I can only start up now in Safe Boot mode. Is there a way to turn it off? Also, I do not have a sound list, so I can't access anything requiring audio. Google Chrome only shows up as a white screen. Pictures that loaded before don't load in browsers, etc. Any suggestions? I figure I should reinstall Mac OS Lion for starts, maybe even do a mirror backup and reformat the drive. I think this drive has turned into scrambled eggs...what a headache!
-
I cannot change song order on playlists (old or new) with highlight and drag. I have turned off shuffle and highlighted the far left column (up/down arrow) of playlist. My mac pro is running 10.5.8 and am using itunes 10.4. I can't drag and drop "music" to "playlist" but can right click and get the option to "add to playlist." No such option for moving song within playlist, only the up and down arrow which moves song from top to bottom list, so if it is #4 from top it will move to #4 from bottom. Stupid I know. I spent over an hour with Apple support, reinstalled itunes, restarted and rebooted computer. Networked with my laptop which is running 10.6.8 and itunes 10.4 and it can drag and drop. The final Apple support solution was to reinstall my operating system. I would prefer not to. Any other ideas?
After looking at other people's posts, I think it's official: there is a bug. Itunes support said I should not have lost the drag/drop tool and I haven't on the laptop that is running itunes 10.4 and operating system 10.6.8. I chatted with someboby who lost both his drag/drop and side scroll and what we have in common is a wacom tablet for a mouse. My laptop is a wireless mouse. I reinstalled whatever updated driver that wacom has out there, shut the system down for night, hoping for magic, but alas none to be had. So if I want to change song order, I network the laptop and desktop, share the screen on the laptop, drag and drop to my heart's content and curse Apple for making me work this hard to find the tool that was once at my fingertips. Apple also let me know that if I want to share songs in household that the hundreds on songs that were purchased for .99 need to be repurchased for another .30. Maybe Apple is holding my drag/drop tool captive til I pay up the money or Maybe the next update will fix the problem, I for one give up for now.
-
Using Logic 7.2 on a Mac Pro with Protools 7.2.1 and Mac OS 10.4.7
I am researching purchasing a New Protools/Logic System
Seems the version of Protools to use with the new Mac Pros is 7.2.1, which only recently came out to work with the new "Mac Pros" Digidesign has stated thhat it works with and Mac OS 10.4.7
The latest version of Logic is 7.2 which has been out for a while....hmmm
Is anybody using Logic 7.2 on a New Mac Pro with Protools 7.2.1 and Mac OS 10.4.7, and does it work?Logic Pro 7.2.2 is not compatible with DAE/TDM on a Mac Pro INTEL.
You will see only "CoreAudio" as available choice, when trying to engage your audio hardware.
We have to wait for any announcements in this regard, maybe at AES or DigiDays in San Francisco.
Best,
21th -
I have a mac pro with 15' screen 8 gigs and can not edit my dvd video from the star edit program that is included with the computer...i wonder if i need to download something???? it play the dvd and opens the star program but i can't import the dvd content into the program(star so i can star editing...what choices do i have
If you are trying to edit a commercial (store bought ) video, it will not allow this due to copy protection on all commercial disks. Here are some links for editing in iMovie:
http://support.apple.com/kb/PH2209
http://support.apple.com/kb/PH2208
http://support.apple.com/kb/PH2212
http://support.apple.com/kb/PH2235
http://support.apple.com/kb/PH2315
http://support.apple.com/kb/PH2292
http://support.apple.com/kb/PH2283
http://support.apple.com/kb/PH2258
http://support.apple.com/kb/PH2308
http://support.apple.com/kb/PH2201
Hope some of these help, you can also go to HELP in iMovie, type in a question for information.
All the best -
Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feed
Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feedback. I had a powermac before this with the speakers and it worked fine. But the mac pro is having these issues. Is it the firewire port or the speakers or (and most likely) just a firmware glitch with mac pro? Anyone else see these issues?
http://web.mac.com/jerimydulay/Site/MyAlbums/Pages/Lacie_FirewireMIDI.html
Here is my audio settings. For some reason I wish I could remember what I did. It was actually the Apple Store tech in the Unversity Village in Seattle that gave me the idea and I swear I had to change the settings in MIDI setup. Now that Leopard is out it seems the MIDI stuff has been redone. I included screenshots of my MIDI setup as it is currently to see if you see something different on your computers. Let me know! -
I've just acquired a 2007 Mac Pro 2,1 2x 3GHz Xeon and would like to upgrade the graphics card
I've just acquired a 2007 Mac Pro 2,1 2x 3GHz Xeon and would like to upgrade the graphics card. I'd like to be able to run the Adobe CC 2014 software for 2D animation work. Don't need CUDA for any ray-traced work, just want to be able to run Ai and AE at the same time and have it handle the playback. Will this card http://www.ebay.com/itm/181466634525?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack =true be a good way to go? Or should I stick with the 4500? Or is there any other suggestion or things I should know?
<Re-Titled By Host>Only a tad pricey but half what it use to be and works - Apple ATI 5870
http://www.amazon.com/Apple-ATI-5870-Standalone-MC743ZM/dp/B003Z6QH6W/
Check it on www.barefeats.com - back in 2010/2011 for tests
Or 5770
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M/
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M/ref=sr_1_1?ie= UTF8&qid=1416257115&sr=8-1&keywords=apple+ati+5770&pebp=1416257120057 -
Should I buy airport express, extreme or time capsule? I have my new Mac Pro. 2 iPhones, 2 iPads , and grandchildren who come with their devices. I live in a two-level house.
A Time Capsule is an AirPort Extreme with a built in hard drive to allow your Mac(s) to back up automatically, so it's a logical choice if you need a wireless router and back up capabilities for your Macs
The AIrPort Extreme has a bit better antenna arrangement than an AirPort Express, so it would be a good choice for a two level house.
Depending on the location of the "main" wireless router, you may find that you still need to add an extender or two in other parts of the house for full, fast wireless coverage. The AirPort Express is a good choice for this duty.
To compare the 3 Apple devices, see this Apple support document:
Compare Apple Wi-Fi base stations AirPort Express AirPort Extreme Time Capsule -
Can the Mac Pro run Window XP (booth camp) and be used as a MAc OS server
Hi There
Can the Mac Pro run Window XP (booth camp) and be used as a MAc OS server in the same time?
I am a small business and I was thinking of using the new mac pro for a new workstation on my studio and to also use it as a server for 5 work others stations. Is that possible? Or I am asking a bit to much work load to do for the Mac Pro?
Can the Mac Pro can run under Window XP and Autocad and still be accessed by other workstation whilst working on the cad software? Is booth camp will slow the machine like Virtual PC?
IS the MAc Pro can manage file hosting website with PHP and mySQL capabilites?
CHARLES
MAC PRO Mac OS X (10.4.7)Great question, but it appears the answer is no (at this time); they promise to work on it immediately. Check this thread at parallels.
http://forum.parallels.com/thread3659.html
iMAC G5 20" - 2GB RAM - 150 GB Hard Drive Mac OS X (10.4.6) Also MacMini & MacBook Pro Intel Core Duo - OS X & WIN2K -
After installing Yosmite, The following message is stopping me accessing my disk utility. 'You can't use this version of the application “Disk Utility” with this version of OS X.' you have “Disk Utility” 12.1.1.
not only that my Mac pro keeps dropping my internet connection and logs on to BT Open.
HelpFor whatever reason you don't have the Yosemite version of Disk Utility which is 13. I suggest you reinstall Yosemite.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the 10.10.1 update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Check that you have the current version of Disk Utility. -
Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?
Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian -
If I buy creative cloud for PS and Lightroom 5 for a mac can I also put it on a laptop for the price of $119?
one subscription entitles users to install and activate their adobe apps on up to two computers concurrently.
so yes, you can subscribe to the photographer plan and use both ps and lr on a desktop and a laptop (or two desktops or two laptops). they can both be macs or both be pcs or one of each. -
i have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they are printed?
why can't you use the keyboard the way it is printed?
Maybe you are looking for
-
Hotspot click for only some rows in ALV grid for a particular column ?
Hi there, In ALV grid, we can make Hotspot enable for all rows in a specified column by specifying in the fieldcatalog with Hotspot attribute set as true. But I want to enable Hotspot only for certain rows in the particular column. I tried wi
-
We have to read the attachment in the email
Hi All, We have requirement that we have to read the Email from particular Emailid we will get an XML as an attachment and we have to read the attachment with in the email and we have to store the values into database. Can any one help in this issue.
-
How to delete a field from search help which is delivered
hi I got a requirement to delete a field from search help which is delivered long back Regards krishna
-
Argument count mismatch error: Expected 1, got 0.
I am writing a datagridcolumn array to the cookie, and upon retreiving the user data it immediately throws "argument count mismatch error: Expected 1, got 0" on MediaGridColumnInfo(). I assume there is a disconnect between what I am saving and what i
-
I realize that websites now have a whole lot of extraneous stuff running, but this is getting ridiculous. This is a powerful pc with a fresh install of windows 7. These damn "stop script" messages are ruining my browsing experience. It gives me two c