Mac Pro, 7300 GT, 23" HD and 2 19" Samsungs.. is it possible?

Hi
I currently have a 23" HD display connected to my dual DVI port and a single 19" Samsung on the other DVI port on my 7300 GT. Can I connect the 23" HD to the single DVI port and run 2 of these Samsungs (I already have a DVI splitter from when I used the 2 Samsungs on a PC with a matrix G450) off of the dual DVI port?
Thanks

A DVI splitter will put the same picture on two displays (the displays have to be the same resolution). It doesn't matter if you use the single or dual-link DVI port on the graphics card.

Similar Messages

Mac Pro will not boot - HD and Machine are fine.

Greetings, and thank you in advance for your wisdom.
I have a 12-core Mac Pro, and she has been running like a dream. Once a month I run Onyx. Yesterday I did the same and upon reboot I got the grey apple screen and the spinning progress wheel that never stops spinning.
1. I repaired the HD via Disk Utility. All is fine.
2. The contents of the start-up drive are accessible - so the drive itself is not physically damaged.
3. I installed a new HD and made a copy of this Start-up disk via the Disk Utility. It will not boot from this drive as well.
4. I installed Snow Leopard (still using this) on the new drive to make sure the computer was happy. It fires up fine.
5. Everything is disconnected from the Mac Pro
So, I have obvious, and idiotically damaged the start-up disk using Onyx (assumption).
My life would be much better knowing I could do something that would enable me to boot from my current start-up and that's where I seek your wisdom.
Another question would be: If the above is not possible, if I install a fresh OS on the new drive, and then begin to replace all of the folders from the old drive (applications, library, etc.) will I be able to access my files as I did before. My issue is that I use this for music production, and there are literally close to 100 plugins that all have been registered. Going back through that process again would be days of labor, as some of these were purchases years ago. Tracking down serials would be a task. I think you understand.
So any advice that might prevent me from having to do as I said above will be wonderful.
Thank you all so much.
Lance

Under some circumstances, you may need to reinstall Mac OS X. You can reinstall Mac OS X while keeping your files and user settings intact.
from:
Mac OS X 10.6: Reinstalling Mac OS X
If your Hardware is functioning correctly, and your disk has no un-repaired Directory problems [Hint: run Disk Utility ( Repair Disk ) first] then re-installing Mac OS X modifies ONLY the files that are part of Mac OS X. Your Added Applications, User files (which contain preferences and serial numbers) are not supposed to be touched.

I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so wha

I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so what is the best card?
Thank you

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
Also see:
https://discussions.apple.com/thread/6282459?tstart=0

TS1362 I have a Mac Pro tower, am running osx and iTunes will not work.. It basically just stopped working after having run faultlessly for...years... I can see all the songs, playlists etc, but the progress bar will not progress..it's 'stuck'. Suggestion

I have a Mac Pro tower am running OSX and iTunes will not work. It has always worked flawlessly. I can see all my iTunes content- my playlists, my songs et cetera, But I cannot play anything. The progress bar is 'stuck'...any suggestions?

Thanks. I have been using iTunes since its inception and have never had a problem...I'm using the latest version. The progress bar is the bar that moves when you're playing a song..it just won't start when I double click on a song,..have tried quitting, rebooting etc but nothing works. Apple are useless-they have told me twice they've tried to call me 'momentarily', but I've been waiting by the phone, and they definitely have not tried to call...

I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do? How can I get the data off this disc? I can see it has been already burned, so files are on there?

I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do? How can I get the data off this disc? I can see it has been already burned, so files are on there?

Try cleaning the lens and see if that will restore functionality to the DVD drive. Use a DVD lens cleaning disk, if you have a can of compressed air, shoot some into the slot or wrap a fine microfiber cloth (eyeglasses cleaning cloth) around a business card and insert it gently inside the slot.
If no success, make an appointment at an Apple store genius bar and get a free diagnosis from them.
Ciao.

PS CS6 on the mac pro: the bruch in hard and soft is the circle of the bruch bigger than then the effect. How can i bring it to normale? /Users/jorisneyt/Desktop/Schermafbeelding 2014-11-07 om 10.04.59.png

PS CS6 on the mac pro: the bruch in hard and soft is the circle of the bruch bigger than then the effect. How can i bring it to normale?

Go to System Preferences>Accessibility>Display and the set the Cursor Size to Normal

Mac pro cinema display cuts out and can't access Mac with screen sharing

Hi
A weird thing has started happening to my Mac Pro today. After using it for a few minutes the cinema display it is attached to on the Mac Pro just goes black. The Mac Pro is clearly still on - the light is on and i can hear the fans. The Mac Pro shows up on my local network and i can connect to it and access files from my Macbook, but screen sharing doesn't work (i just get the message 'contacting mac pro' and nothing else) and i can't connect to shared iTunes library either, which makes me think it is not just a display issue. I cannot wake the computer with the mouse or keyboard, which makes me think it isn't just a sleep issue. All i can do is physically turn the Mac Pro off, start it up and it will start up successfully and then work for a few more minutes before i get the same problem. I have reset the PRAM and SMC and still have the same problems. Can anyone suggest anything else i can try?
I should mention that i have another problem with the Mac Pro in that it has been spontaneously waking up from sleep and starting up from shutdown, and i still haven't resolved this. I don't know if it is connected to the above issue.
thanks
nick

I have experienced almost the exact same thing with my new 2008 Mac Pro and my 30" Apple display. It has happened to me twice in the last few weeks. The first time I chalked it up to a fluke, but now that it's happened again I searched the forums. In both cases I've had music playing in iTunes which continues playing, goes on to the next track, and so on. So the machine has not crashed in full. I too can connect to the files via another computer on the network, but cannot share the screen.
I have not had the sleep issues you have had.
I'll look at the link you provided in your next post to see where that gets me, but I wanted to let you know you were not alone on this one.

Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5 and it will not open on the iMac the only change is the my new iPhone number is OS. Any ideas?

Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5 and it will not open on the iMac the only change is the new Maverick OS from the macpro Lion OS. Any ideas?
<Personal Information Edited by Host>

Setup Assistant and Migration Assistant do not restore MS Windows, it only does the OS X partition. All of your Windows stuff must be backed up and restore using a MS Windows application. If no one on this forum is able to answer your question then I'd repost it on a Parallels forum to see how other Windows users approach this.

I attempted to download X Yosemite to my Mac Pro. It timed out and would not finish. I cannot stop the website from believing it is still downloading. Help.

I attempted to download X Yosemite to my Mac Pro.
It timed out and would not finish.
I cannot stop the website from believing it is still downloading.
Help.

oatgeo wrote:
I checked the proxy and it should be OK. That's mean I have to try and try again until I get it from the slow servers.
Yes.

My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

General purpose Mac troubleshooting guide:
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form
Troubleshooting: My computer won't turn on
https://support.apple.com/kb/TS1367
Where are your bootable backups and clones stored?
What do you have to boot from to restore or attempt to recovery files that are not backed up?
It won't be a PowerMac. People tend to think they look alike? or mean the same thing.
http://www.everymac.com/systems/apple/mac_pro/specs/mac-pro-quad-2.66-specs.html
Try zap PRAM and SMC Reset. If you have ATI 5770 which many have upgraded to you won't be able to use older DVD or systems than 10.6.5

Playstation 3 Digital out to Mac Pro 3,1 Digital in and out again through Konnekt 6

So I got a used Mac Pro 3,1 on craigslist and it's a beast. Only problem is that the superdrive was broken. No big deal really, but I've been thinking about how it'd be cool to be able to watch blu-ray movies on it. I Could just buy an 80 dollar drive, or I could use my Playstation. I've got optical outputs on the PS3 and inputs on the Mac, so my question is what the easiest way to route the sound would be. Just using audio/midi setup? Usually inputs need to be "armed" so that there isn't that constant stream of info and I imagine with digital it's the same? Would I have to open up Logic and do some kind of soundflower bed magic?
Thanks!

Ok so I'm home now and continued my seach... and found this:
http://reviews.cnet.com/8301-13727_7-20075185-263/workaround-for-audio-problems-with-os-x- 10.6.8-update/?part=rss&tag=feed&subj=MacFixIt
I won't be able to try it until back in the studio tomorrow but it may just be what I need - will report back here. Seems that it is an OS issue though and not an Adobe one.

My mac pro is running really slow and the beach ball keeps appearing

my mac pro is running really slow and the beach ball keeps appearing
is there some good free software that cleans it up, new to macpro
Software OS X 10.9.2 (13C1021)

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

My mac pro is running very slow and I have a pin wheel turning

My mac pro is running very slow and I have a pin wheel turning what can I do?

https://support.apple.com/kb/DL1433
https://www.apple.com/macosx/recovery/
http://support.apple.com/kb/HT4718

Mac Pro 2008 keeps shutting down and restarting

Just the other day after being shut down for a week my Mac Pro 2008 started shutting down and restarting on its own. Any idea where to begin troubleshooting?

Then they are probably completely clogged with deleted data.
http://en.wikipedia.org/wiki/TRIM
http://www.cindori.org/software/trimenabler/
the default version is FREE to download. Optional extra features are not required, but are available if you want them by paying US$10.

My mac Pro Tower shows some green and reddish lines on the monitor and gives report of unresponsive processor

My mac Pro Tower shows some green and reddish lines on the monitor and gives report of unresponsive processor

And never heard of one case of AHT finding or reporting a real GPU related problem.
It does sound like the graphic card and best way to know is to swap it out, even if you have a PC card around.

Mac Pro, 7300 GT, 23" HD and 2 19" Samsungs.. is it possible?

Similar Messages

Maybe you are looking for