Mac pro 8 core memory 667 and 800MHz in the same machine

Hi there,
is it possible to install 667 and 800MHz memory in the same mac pro 8 core?  Is there a performance hit to doing this?  does memory need to be installed in matched pairs in a mac pro 8 core?
Cheers

http://www.bing.com/search?q=A1186+EMC(2138)
http://www.apple.com/support/macpro
Have you not looked at memory item in System Profiler??
As I said, there is no benefit to using faster memory.
http://www.barefeats.com/harper5.html

Similar Messages

  • I bough a Mac Pro 2010 second hand and deleted all the files without backing up now is asking me for the Apple ID of the person who installed maverick,any ideas

    I bough a Mac Pro 2010 second hand and deleted all the files without backing up now is asking me for the Apple ID of the person who installed maverick,any ideas

    If the Mac's firmware was updated, you can try this Internet Recovery:
    Hold down Command + Option + R during restart or bootup; hold until you see a spinning globe (takes up to 10 minutes). Once in the Utilities window, use Disk utility to wipe the drive, then return to the window and choose to reinstall OS X. If that works, the OS will be installed without being tied to an Apple ID.
    FWIW, if the firmware was updated, you will not be able to use the Snow leopard disk to install - I just did several tests and it does not work. You can, however, possibly install the SL onto an external drive and then clone it to the internal or (if you have a clone), boot from that and clone it back - I just tested that as well.
    If the firmware was not updated, then you can use the SL install disk.

  • I have a 2009 Mac Pro 10.8.3 and half of the time Disc Utility doesn't respond?  Any ideas?

    I have a 2009 Mac Pro 10.8.3 and half of the time Disk Utility doesn't respond and I have to force quit and restart the machine.  Any ideas?

    You have some (major) issues.
    Are you in Recovery Mode ? Used Option key or Command R to get there?
    I would grab the ML installer ESD you saved and do a clean install on another drive and begin to rebuild to a new system.
    You may or may not have TimeMachine but have backed up problem files.
    Having a bootable backup clone of your system is a must.
    Hard shutdowns will add more layers of problems and add to whatever there was before.
    Generally there is not a need to use Disk Utility other than to repair permissions either before or after installing updates.
    Have you:
    tried with everything else unplugged so you don't have any external devices
    tried with a safe boot
    Why.
    After any forced shutdown you should use ML Recovery and one Safe Boot on the first next boot from a working system.

  • Can I use HP Pro 8600 with usb and wireless at the same time

    Can I use HP Pro 8600 with usb and wireless at the same time?  Sometimes I cannot get the wireless to work, it seems to be my laptop.  It would be nice if I could use the usb, but it doesn't work.  What should / can I do, if anything?
    Sam

    Hi,
    Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What is the best way to have access to OSX and OS9 from the same machine?

    What is the best way to have access to OSX and OS9 from the same machine?
    Do I need to partition the hard drive? Installed both Tiger and OS 9 on the G5 and it is having problems starting up properly.
    G5   Mac OS X (10.4)  

    And here is the prove for Edwin's message: Macintosh: Some Computers Only Start Up in Mac OS X

  • Designer 6i and 10g on the same machine?

    I have Designer 6i and corresponding repository on my machine.
    The problem with 6i I can't save diagramm in HTML format
    I believe I can save in HTML format in 10g or other?
    Can I install on the same machine 10g designer?
    should I configure new repository?
    TIA

    See my update on your earlier question.
    As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
    Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.

  • CS3 Bridge and CS4 on the same machine.

    Hello Everyone,
    I have adobe photoshop CS3 and Illustrator CS4 on my machine.  Any known issues for running bridge CS3 and CS4 on the same machine?  Some experts at telling me not to use Photoshop CS3 with Bridge CS4, just wondering.  Thanks for you replies.

    Bridge is not really a stand alone product, and tuned to work with its current version of PS.  Also, Bridge CS4 has some features changed and/or added.  So if using CS3 Bridge you might have aspects that don't work with PS CS4.
    I would keep CS3 on the machine if you don't need the HD space, until you feel you no longer need the older version.  But use them as a pair as intended.  Also, only have one Bridge running at a time.
    I did not upgrade to CS4, but from what I have read I see no reason to use Bridge CS3 as the upgrade is faster, less prone to crashes, and has added features.
    CS4 PS on the other hand can be tricky if you don't have a newer computer with a good video card.

  • Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

    I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished.  For the moment I just need some "high level" guidance, little details can be worked out once I know
    which direction I will go.  I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time.  DFS can stay installed for maybe
    future purposes but clearly I wouldn't need the DFS Replication with only one machine.
    Here's a few details of the environment....
    1.  DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present.  But likely they will be gone and the DFL elevated before I start on the File Server project
    2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server.  Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
    and maybe the same IP if not too much trouble.  This way the existing shortcut would continue to work with the new 2012R2 File Server.  The UNC path represented in that shortcut is also configured into one or more of our major business applications,
    futher emphasizing the need to keep the UNC path the same throughout the process.
    3. The facility runs 24/7/365 but is "light" on weekends.  The political environment is such that there is little to no tolerance for any down time at all.
    4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
    Thanks for any suggestions.
    Phillip Windell

    Hi Sharon,
    I've done some more reading and have a few new ideas to run past you....
    Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
    to flip over to the new server.  DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
    the old server to 2003R2 first.  As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
    Thanks for the reg info on the Shares.  I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job.  I'll probably export that Key as a
    safety move whether I use it or not.
    Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
    1. Remove the DFS Replication Object (optionally remove DFS Services completely)
    2. Rename the old File Server to something else and set it to DHCP
    3. Rename the new File Server to the name I want to use and give it the IP the old server had.
    How does that sound?
    Phillip Windell

  • Is it possible to run VLM and lmtools on the same machine

    hi together ... is it possible to run VLM and lmtools on the same machine without any problems?
    the running system will be Windows Server 2008 R2 x64! maybe we will install the license server on the virtual server.

    Hi SvenNittmann,
    in general, it should be possible to run both tools (VLM and lmtools for FlexNet) on the same machine. But I wouldn't recommend you this way, because NI VLM is also build on top of FlexNet and sometimes you will receive ugly problems with the installation of both tools on the same PC. It is possible to use VLM in a virtual machine without any problems or restrictions. NI provides information about the usage of VLM in a virtual machine, like you can see here:
    Volume License Manager on a Virtual Machine - National Instruments
    http://digital.ni.com/public.nsf/allkb/5730FDDC97F9157E8625755F00749CFF?OpenDocument
    I also use VLM in a virtual machine and I could recommend you the same solution.
    Regards, Stephan

  • Can i run 9ias versions 1 and 2 on the same machine

    i need to install 9ias versions 1 and 2 on the same machine but in separate databases, is this possible? if it is possible are there any issues that i need to be aware of?

    You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
    *http://portableapps.com/apps/internet/firefox_portable#legacy
    *http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
    *Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

  • How to install iFS and iAS on the same machine?

    I have successfully installed iFS on a Windows NT 4 machine. Now, I would like to install iAS Enterprise Edition on the same machine. The installation guide for iAS says that I should first deinstall all products from the default ORACLE_HOME. I have not found a clue as to what to do if I want to keep the software already installed.
    Would it work if I tried (after installing iAS) re-install iFS using different ORACLE_HOME directory?
    Is there a white paper or any other document that would clear up the issues involved in installing Oracle products in ORACLE_HOME?
    Thanks a lot,
    Marek

    You can install IAS on the same machine that Oracle and IFS are on. Install IAS into a new Oracle Home (i.e. D:\IAS).
    This worked for me.
    I am still waiting to hear how (look for my post about 20 below yours) how to configure IFS to use the Apache Web Server that is part of IAS.
    Good Luck.
    Maybe one of these days Oracle will create an IAS discussion forum. This is my third request and I haven't heard anything back from them yet.
    null

  • Developer 1.6, 2.1 and 6i on the same machine does not work

    I have installed the three versions on the same machine against Oracle 7.3.4 in another node. Each one is installed in a different OracleHome. Version 2.1 and 6i works fine but when I run Forms 1.6 I get a message telling me that it cannot find the fmcus.msb.
    Is trying to find it in the path of the Developer 2.1 and of course it does not work.
    The Oracle Home selector only shows me those corresponding to 2.1 and 6i.
    It is possible some workaround even if running one version at a time.
    Thanks.

    I have installed the three versions on the same machine against Oracle 7.3.4 in another node. Each one is installed in a different OracleHome. Version 2.1 and 6i works fine but when I run Forms 1.6 I get a message telling me that it cannot find the fmcus.msb.
    Is trying to find it in the path of the Developer 2.1 and of course it does not work.
    The Oracle Home selector only shows me those corresponding to 2.1 and 6i.
    It is possible some workaround even if running one version at a time.
    Thanks.

  • Mac Pro 2008 Memory Overheating and Boot Problems!

    Hello
    I have a mac pro early 2008 8core 2.8ghz with 20gb ram and I have 2 very frustrating problems
    1. The Mac Pro has trouble booting, every time I power on the mac pro it makes the boot noise then shuts down, I have to press the ON button at least 5 or 6 times for it to regularly boot, I have replaced the hard drive to an SSD recently to fix the problem but it stills persists. I don't know if its the riser card, the GPU or the logic board thats faulty but its driving me crazy!
    2. My Memory is overheating! again I don't know whether its my memory or the riser cards, I recently purchased an extra 16gb of ram, so I'm super confused, is this mac pro dying, because i really don't want it too! please help me out!!

    I have not received an answer to the question and the meaning of said specs remains unclear to me. Nevertheless, I installed the memory and have been running it without problems for about a month now.

  • Mac Pro turns itself on every day at the same time

    My Mac Pro suddenly decided to start turning itself on every day at 6:00:12pm local time (12:00:12AM GMT). It turns on at exactly 12 seconds after 6:00pm every day.
    I recently upgraded to OSX 10.5 and installed the point update. It did it before the point update and continues to after the point update.
    I have had it since April and it has never done this before. It did NOT do this under 10.4.
    I have the options in system settings to NOT wake on LAN event and NOT restart after power failure. It is NOT set to automatically turn on but it is set to automatically turn itself off at 1:00am.
    These settings have not changed since 10.4 and I have verified them. No other software has recently been installed since the update to 10.5. I did update the Wacom driver to the new Leopard driver. That is all. I have the Wacom tablet unplugged from the computer.
    Any ideas?
    Here is the console log from yesterday. It pretty much looks the same every day.
    Log file:
    Nov 18 18:00:12 localhost com.apple.launchctl.System[2]: kern.maxproc: 532 -> 512
    Nov 18 18:00:15 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    Nov 18 18:00:15 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
    Nov 18 18:00:15 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
    Nov 18 18:00:16 localhost kernel[0]: npvhash=4095
    Nov 18 18:00:16 localhost DirectoryService[12]: Launched version 5.0 (v514)
    Nov 18 18:00:16 localhost kernel[0]: hi mem tramps at 0xffe00000
    Nov 18 18:00:16 localhost kernel[0]: PAE enabled
    Nov 18 18:00:16 localhost kextd[11]: 412 cached, 0 uncached personalities to catalog
    Nov 18 18:00:16 localhost kernel[0]: 64 bit mode enabled
    Nov 18 18:00:16 localhost kernel[0]: Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
    Nov 18 18:00:16 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Nov 18 18:00:16 localhost kernel[0]: vmpagebootstrap: 973126 free pages and 75450 wired pages
    Nov 18 18:00:16 localhost kernel[0]: migtable_maxdispl = 79
    Nov 18 18:00:16 localhost kernel[0]: 88 prelinked modules
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=2 Enabled
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=3 Enabled
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=5 Enabled
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=6 Enabled
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=7 Enabled
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=4 Enabled
    Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
    Nov 18 18:00:16 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
    Nov 18 18:00:16 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    Nov 18 18:00:16 localhost mDNSResponder mDNSResponder-164 (Nov 4 2007 13:23:04)[16]: starting
    Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
    Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
    Nov 18 18:00:16 localhost kernel[0]: calling mpopolicyinit for mb
    Nov 18 18:00:17 localhost kernel[0]: Seatbelt MACF policy initialized
    Nov 18 18:00:17 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
    Nov 18 18:00:17 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Nov 18 18:00:17 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Nov 18 18:00:17 localhost kernel[0]: MAC Framework successfully initialized
    Nov 18 18:00:17 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
    Nov 18 18:00:17 localhost kernel[0]: devfsmakenode: not ready for devices!
    Nov 18 18:00:17 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    Nov 18 18:00:17 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Nov 18 18:00:17 localhost kernel[0]: mbinit: done
    Nov 18 18:00:17 localhost kernel[0]: Security auditing service present
    Nov 18 18:00:17 localhost kernel[0]: BSM auditing present
    Nov 18 18:00:17 localhost kernel[0]: rooting via boot-uuid from /chosen: A3FDED86-37C7-3DF1-9FCC-6C589DDC1077
    Nov 18 18:00:17 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Nov 18 18:00:17 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3500630AS P Media/IOGUIDPartitionScheme/Customer@2
    Nov 18 18:00:17 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
    Nov 18 18:00:17 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0019e3fffe8072a0; max speed s800.
    Nov 18 18:00:17 localhost kernel[0]: Jettisoning kernel linker.
    Nov 18 18:00:17 localhost kernel[0]: Resetting IOCatalogue.
    Nov 18 18:00:17 localhost kernel[0]: Matching service count = 0
    Nov 18 18:00:17 localhost kernel[0]: Matching service count = 18
    Nov 18 18:00:17: --- last message repeated 4 times ---
    Nov 18 18:00:17 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:19:e3:66:97:7a
    Nov 18 18:00:17 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:19:e3:66:97:7b
    Nov 18 18:00:17 localhost kernel[0]: Previous Shutdown Cause: 5
    Nov 18 18:00:17 localhost mDNSResponder[16]: Adding registration domain tjasher.members.mac.com.
    Nov 18 18:00:17 localhost mDNSResponder[16]: Setting up AutoTunnel address FD14:A58A:53D0:1166:0219:E3FF:FE66:977A
    Nov 18 18:00:19 localhost fseventsd[42]: bumping event counter to: 0xfa0a6 (current 0x0) from log file '00000000000f52e0'
    Nov 18 18:00:22 localhost kernel[0]: Intel8254x -- Link Down -- 00:19:e3:66:97:7a -- called by enableHardware() --
    Nov 18 18:00:26 localhost kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
    Nov 18 18:00:25 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[37]: Login Window Application Started
    Nov 18 18:00:26 localhost kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0x0
    Nov 18 18:00:22 localhost bootlog[48]: BOOT_TIME: 1195430411 0
    Nov 18 18:00:26 MacPro kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
    Nov 18 18:00:26 MacPro kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x4000
    Nov 18 18:00:26 MacPro kernel[0]: -- PHY Specific Status Register (17d) = 0x8040
    Nov 18 18:00:26 MacPro xgridcontrollerd[28]: Error: controller missing password file "/etc/xgrid/controller/client-password"
    Nov 18 18:00:26 MacPro com.apple.launchd[1] (com.apple.xgridcontrollerd[28]): Exited with exit code: 2
    Nov 18 18:00:27 MacPro kernel[0]: Intel8254x -- Link Up -- 00:19:e3:66:97:7b -- called by interruptOccurred() --
    Nov 18 18:00:26 MacPro rpc.statd[33]: statd.notify - no notifications needed
    Nov 18 18:00:26 MacPro xgridcontrollerd[28]: Notice: controller failed
    Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
    Nov 18 18:00:26 MacPro configd[15]: setting hostname to "MacPro.local"
    Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0xcde1
    Nov 18 18:00:26 MacPro /usr/sbin/ocspd[64]: starting
    Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
    Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x7c00
    Nov 18 18:00:27 MacPro kernel[0]: -- PHY Specific Status Register (17d) = 0xaf08
    Nov 18 18:00:27 MacPro kernel[0]: Intel8254X -- Negotiated Speed: 1 Gb/s, Duplex: Full, Flow Control: Receive Pause Enabled, Transmit Pause Enabled
    Nov 18 18:00:27 MacPro kernel[0]: sandbox-exec 28 PARENTAGEEXEC_AND_DROPPROFILE SBF /usr/libexec/xgrid/xgridcontrollerd 13 (seatbelt)
    Nov 18 18:00:28 MacPro kextd[11]: writing kernel link data to /var/run/mach.sym
    Nov 18 18:00:30 MacPro com.wacom.wacomtablet[90]: TabletDriver[90]: Env RUNWITHLAUNCHD is set to 1
    Nov 18 18:00:31 MacPro loginwindow[37]: Login Window Started Security Agent
    Nov 18 18:00:31 MacPro Parallels[106]: Loading Hypervisor module...
    Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/hypervisor.kext is already loaded
    Nov 18 18:00:32 MacPro kernel[0]: [Parallels] Parallels Hypervisor started.
    Nov 18 18:00:32 MacPro Parallels[112]: Loading Monitor module...
    Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/vmmain.kext is already loaded
    Nov 18 18:00:32 MacPro kernel[0]: [Parallels] Parallels VM observer thread started
    Nov 18 18:00:32 MacPro Parallels[114]: Loading ConnectUSB module...
    Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/ConnectUSB.kext is already loaded
    Nov 18 18:00:32 MacPro Parallels[116]: Loading Network module...
    Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/Pvsnet.kext is already loaded
    Nov 18 18:00:32 MacPro Parallels[118]: Loading Virtual Ethernet module...
    Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: /Library/StartupItems/Parallels/Pvsvnic.kext loaded successfully
    Nov 18 18:00:33 MacPro kernel[0]: comparallels_kextPvsvnic1: Ethernet address 00:1c:42:00:00:01
    Nov 18 18:00:33 MacPro kernel[0]: comparallels_kextPvsvnic0: Ethernet address 00:1c:42:00:00:00
    Nov 18 18:00:33 MacPro ntpd[25]: bind() fd 28, family 30, port 123, scope 7, addr fe80::21c:42ff:fe00:1, in6is_addrmulticast=0 flags=17 fails: Can't assign requested address
    Nov 18 18:00:33 MacPro ntpd[25]: bind() fd 28, family 30, port 123, scope 8, addr fe80::21c:42ff:fe00:0, in6is_addrmulticast=0 flags=17 fails: Can't assign requested address
    Nov 18 18:00:33 MacPro Parallels[121]: Staring DHCP/NAT daemon...
    Nov 18 18:00:33 MacPro pvsnatd[123]: en3: DHCP/NAT for 10.211.55.2-10.211.55.254 netmask 255.255.255.0
    Nov 18 18:00:33 MacPro pvsnatd[123]: en2: DHCP for 10.37.129.2-10.37.129.254 netmask 255.255.255.0
    Nov 18 18:00:34 MacPro Parallels[125]: Restarting InternetSharing...
    Nov 18 18:00:34 MacPro Parallels[127]: Restaring CiscoVPN...
    Nov 18 18:00:34 MacPro com.apple.SystemStarter[31]: /Library/StartupItems/Parallels/Parallels: line 62: /System/Library/StartupItems/CiscoVPN/CiscoVPN: No such file or directory
    Nov 18 18:00:34 MacPro Parallels[129]: Initialization complete.

    Updates installed by Software Update are "delta" updates - they go from 10.x.y to 10.x.y+1, and are customized for a particular Mac model. It appears that in this case they also patch some files instead of replacing them fully. The "combo" update will update 10.x.anything to the latest 10.x.y, it'll update any Mac model, and in this case it appears they contain full files instead of patches. The delta updater for 10.5.1 is about 39 MB; the combo updater is about 110 MB. You can download the combo updater from the Support site. Sites such as www.macfixit.com often recommend installing the combo updater instead of, or after, the delta updater, as it often solves mysterious problems. One specific example is the numerous "SUID" messages when doing a "repair permissions" - the combo update gets rid of all but one, and that one is specifically stated by Apple to be okay. Of course, no guarantees, but the combo updater is a reasonable thing to try.
    Doug

  • Mac • LR - Prints too dark and color not the same

    I a real problem where my prints are too dark about 2stops+ and color seem way off .
    How can I syc PS & LR so things print the same and the way that they should.
    Having to do work a rounds take up space that I can use, the time wast is ________ .
    Any and all hepl is welcome
    and
    Thank you
    Ric.

    RICHARD RODAMAR wrote:
    I a real problem where my prints are too dark about 2stops+ and color seem way off .
    How can I syc PS & LR so things print the same and the way that they should.
    So, printing an image from PS is OK, but from LR it's dark?
    Do both have the same printer ICC profile selected?
    Bob

Maybe you are looking for