Mac Pro and Airport Cards

I've seen it written here about the new airport cards in the new Mac Pros. I was wondering if anyone might have called Apple about them. Are they user installable?

I called Apple tech support earlier today and asked them about it. They told me that I would have to take it to an Apple Authorized Service Center or Apple Store to have the new airport card installed. I figure, if I really needed it, I could do that so I cancelled my order and re-ordered without the airport card.
Hope This Helps.
Dual 1.42 Mac OS X (10.4.3)

Similar Messages

Mac Pro and Airport Extreme Card

I have a new mac pro and installed the airport extreme card. I cannot see my network but the system tells me the card is on. Any suggestions? I can connect with a direct ethernet connection.

I bought a mac pro last year and went for the wireless option with it. You know the upgrade. Anyway it came as a seperate item and i had to install it myself. It doesn't look anything like the one pictured here, well it just doesn't have a cover like it. So anyway i can't pick up any outside networks and when i share the internet connection with it i have to put my psp right next to the case to get a profoundly amazing 12% signal, Any ideas?

Mac Pro and Video Card. Which???

Hey Guys, Im planning on buying a Mac Pro and if I was not sparing any expense to get the latest & greatest, then would buying the "NVIDIA Quadro FX 4500 512MB, Stereo 3D (2 x dual-link DVI)" ensure the best high end card I can buy for my mac? Is there a big difference between that and the "ATI Radeon X1900 XT 512MB" or the "NVIDIA GeForce 7300 GT 256MB" ?? Not sure which to choose. Thanks

The Quadro is the fastest card you can buy.
Between the Quadro and the X1900, there isn't much of a difference performance wise, but the Quadro is very slightly faster then the X1900 in certain tasks (gaming, in particular).
Between the X1900 and the 7300, there's no real comparison. The 7300 is a baseline card. It will do everything the X1900 does- but not as fast and your frames per second (FPS) will suffer significantly in things where that matters (gaming, again).
If you aren't tied to the Quadro and you want something with any reasonable amount of speed to go with the capabilities of the rest of the machine (Quad Xeon cores), then go with the X1900. It's cheaper, and about the same speed as the Quadro.
The 7300 is, well, going to be slow compared to the X1900/Quadro.
-S'Captain

Bought a mac pro without airport card.

Can find no information as to what I need or how to install it. I have an airport extreme card but it is apparently not compatible with the mac pro.

Hi, I have the same problem like sarah1941. My 2nd problem is that I moved from New York to Calgary AB (Canada) 2 weeks ago and I've been trying to find anywhere in Canada the new airport card along with the new bluetooth card for my Mac Pro. The result was... not even the Apple stores (in Calgary) can help me with where I can get the new airport card. Apple.com doesn't sell it and it's getting frustrating looking for a $35 bucks value card world wide. If you have any infos about where I can get this card, please send me a link. I'd appreciate it a lot. Thanks and A Happy New 2008!

Extremely poor bandwidth and instable connection on Mac Pro to Airport WLAN

Hi folks!
Following Problem: My Mac Pro delivers terrible WLAN performance while my wifes iBook runs the WLAN absolutely stable and up to 5 times faster!!
Been experimenting a lot, but nothing worked so far. It seems with every "update" in the recent months it got worse and worse.
Here are the DETAILS:
Mac Pro (2006)
Dual 3 GHz Dual-Core Xeon
Mac OS X 10.6.3
connected via 802.11n/ 2.4 GHz - signal full (connecting to 5 GHz network fails or delivers no bandwith)
average of 0,5 MB/s download
average of 0,1 MB/s upload
Signal / Noise: -79 dBm / -89 dBm
Send rate: 5
System Settings > Network
Airport DNS: 208.67.222.222 and 208.67.220.220
All Ethernet MTUs: 1452
STRANGE: the data stream shown in network activity monitor keeps jumping from 30kB/s to 1.5 MB/s looks like like a very pointed saw. sometimes its continously high at 1.3 MB/s for 5 Sec then dead then saw again and whatever. sometimes it looks like a chart from the stock exchange.
Tried external System 10.5.5: a little bit of the saw-effect but much more stable. still only about 0.9 MB/s download in average.
ON THE OPPOSITE...
iBook G4
1.33 GHz
Mac OS X 10.5.8
connected via 802.11g/ 2.4 GHz - signal full while sitting right next to the Mac Pro
average of 2.3 MB/s download
average of 1,6 MB/s upload
NICE: continous data stream shown in network activity monitor
RUNNING on:
Airport Utility Version 5.5.1
Airport Extreme Base Station (Simul. Dual-Band II)
Firmware Version 7.5.1
Date bought: Feb 2010
All setting on automatic
WPA2 Key
Name for 5 GHz netzwork aktivated
Multicast: high
Sending Power: 100%
Timeout WPA: 1hr
further 3 checkboxes unchecked
My assumption: System 10.6.3 ***** for older Mac Pro OR Mac Pro's Airport Card is corrupted OR I need an external antenna (if there is such a thing) OR I need some sort of update or sophisticated settings.
Is there ANYTHING I can do? I am pretty close to drill a few holes into the walls of our appartment and get me a long ethernet cable!!
THANX for help!

Ok, now I did the following: Bought a Edimax EW-7711USn WiFi USB Adapter and hooked it up to the USB Port in the back of the Cinema Display. Airport is deaktivated. Installed the Ralink WLAN Utility that is provided with to USB device.
Upside: Getting continous data stream at 1.3 MB/s to 2.1 MB/s = ok
Downside: USB-Adapter stays off after Mac restart. So prior using it, I need to pull it out and stick it in again. Then it connects within 5 Secs.
For only 25 € this is an ok solution. If anybody figures out how to crank up the connectivity of the internal Airport Extreme Card, please let me know.

Quartz Extreme not showing up on stock Mac Pro and card

I have purchased a new Mac Pro and LED Cinema Display from the Apple store last month. Safari Top Sites is not working and the "help" stated I need Quartz Extreme. Looked in the profile, but it is not listed in the list on the right at all. It is a stock apple card and display.
Is my monitor video card not even capable of using this feature or do I need to reinstall the system or something??
Model Name: Mac Pro
Model Identifier: MacPro4,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 3 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MP41.0081.B04
SMC Version (system): 1.39f5
SMC Version (processor tray): 1.39f5
Serial Number (system): H09257EM4PC
Serial Number (processor tray): J592300*MFD <edited by host>
Hardware UUID: 9F9AAE54-0436-5584-87F4-B99AF0523B22
NVIDIA GeForce GT 120:
Chipset Model: NVIDIA GeForce GT 120
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0640
Revision ID: 0x00a1
ROM Revision: 3386
Displays:
Display Connector:
Status: No Display Connected
LED Cinema Display:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off *<------------------------------ Quartz Extreme not even listed*
Online: Yes
Rotation: Supported
Connection Type: DisplayPort

With Snow Leo basically if you can't get quartz extreme you shouldn't be running 10.6.x
Easy way to tell if it is working though would be that your menu bar across the entire top of the screen is transparent, or if you add a widget to dashboard you will get the ripple effect. If you are on a system where Quartz Extreme is disabled you will not get those effects.

Which video card to buy for Mac Pro and AE CS3

I am about to purchase a new Mac Pro and am curious which video card to buy - particularly when it comes to rendering speed.
Apple offers the ATI Radeon HD 2600 XT with 256MB of GDDR3 as a standard option, with the NVIDIA GeForce 8800 GT with 512MB of GDDR3 as a $150 BTO option.
I primarily use AE CS3 using adaptive resolution in lieu of Open GL. The projects are very 3d intensive. My initial thought is that the NVIDIA card has more VRAM and would be a better pick - but would my $$$ be better off toward more RAM? Does using CS4 make a difference?
Any thoughts would be appreciated. And yes, I have searched the forums but have not found anything definitive.

Personally, I'd buy more RAM. The standard display card supplied with the Mac Pro will have perfectly good specs for AE and Prem Pro.
Yes, CS4 should render faster than CS3.

Mac pro and motu PCIe audio card with a 2408mkIII

mac pro and motu PCIe
i recently upgraded to the mac pro from a G5 and now my motu 2408 mkIII sound card does not work.
i installed the motu PCIe 424 pci card from motu and installed the latest UB drivers, followed the instructions to the letter, repeated numerous times in every pci e slot with only temporary luck. it worked briefly and then when the computer slept i lost the connection with the interface and have not been able to regain it.. yes i re-installed to the letter again. the pcie card is seen by the computer but it cannot seen the external rack mounted 2408 via the audiowire that connects it. yes i tried other cables. the unit worked fine on my G5.
i have heard of others with the same problem after updating the firmware to SMC 1.7. my mac pro came with the latest firmware.
Message was edited by: tara ntula

another user forum wrote this on 8 august 2007 in regards to their mac pro.
To my surprise I had five software updates waiting for me. Among them Pro App update, two of them, and this SMC update. After I updated my MOTU PCI-424 audio interface no longer works. Tried installing MOTU drivers again, still nothing. It can't communicate with its audio interfaces. So right now, this amazing update from Apple stopped me from working, and I am on a pretty tight deadline. I hope I'll find a solution ASAP

What graphics card or cards Mac Pro and Dual 30 inch ACD's?

I am hoping that you can all help with a few questions regarding running two 30 inch displays in a new Mac Pro and using Final Cut Pro, Motion, and After Effects.
My issue is which card(s) to order... Two NVIDIA GeForce GT 120 512MB or the ATI Radeon HD 4870 512MB.
Can FCP work off of two different Graphics Cards? I would hook one display to each NVIDIA card via the Dual Link DVI port.
Or with the ATI, I would hook one monitor to the Dual Link DVI and one to the Mini Display Port with the adapter.
The ATI is obviously a more powerful card individually; but, two NVIDIA cards would allow for each monitor its own "lane," which seems like it would be an advantage.
Any advice would be great. I am primarily an FCP user and probably hit After Effects for 25% of my work.
Thanks in advance for any advice!

Neither Motion or Color support dual graphics cards.
FCP used to have issues but they have been addressed in v7 (reportedly).
The 4870 is the better card by far but don't know if it will support 2 30" monitors. In any case, you are spreading the VRAM over a lot of pixels. You'd probably have better response driving 2 24" monitors.
x
fwiw - I don't see the benefit of gigantic monitors. They take up an enormous amount of desktop space, draw a small city's worth of power and don't offer that many more pixels.
x

Universal Audio Card in mac pro and logic together.

Hello, I am thinking on purchasing an Universal Audio Card and using it with a mac pro and logic studio.
Does anyone know if they have used or know about using a Universal Audio card (UAD-2 Nevana 32), or any other universal audio card?
Can you use this card with a mac pro and logic studio and does it have any latency issues? And can you use the Universal's mixor and logic's mixor at the same time, Or do you just use the plug ins on the UAD when using logic. Also it looks like it comes with one input on the card, so how do you plug in multiple guitars and bass and piano, or do you just run one input in and buy a input device for it (what would I need to buy for that?), Thanks so much.
Lou.

Universal's documentation says that it is compatible with Logic 7 and Logic 8. You might want to ask in the Logic forums about hands-on experiences. Universal also has their own forums where you'll probably be more likely to get useful information from experienced users:
http://www.studionu.com/uadforums/
Regards.

Just bought a used mac pro and it has 4 video cards?

Hi all, I just bought a used mac pro and it has 4 Geforce 7300 GT video cards in it. Why would it have 4? Is it just to display on 8 monitors, or can OSX use the power of each card? Is there anything I can do to take advantage of these extra cards? sell them?!

No, OS X cannot combine the four cards. All they are good for is to connect 8 monitors. If you don't plan to do that then you're better off removing three of them (only the upper three.) This will save energy - roughly 50-75 watts per card - and the computer will be cooler.

10.5.2, Mac Pro with AE Card, AEBS (not Gigabit) lost wireless connection

Since I upgraded to 10.5.2, I have been having issues with my wireless connection on my Mac Pro. Here's my setup - an 802.11n Airport Extreme Base Station (not gigabit one) with a 802.11g AEBS connected to it. the 802.11n is running on the 5GHz Spectrum only and does not share with 802.11a (so it's running 802.11n only). The 802.11g AEBS is set to run on the 2.4GHz Spectrum and is set to accept both 802.11g and 802.11b. The MacPro has an Airport Extreme Card running 802.11n. The 802.11n base station is almost next to the 2 base stations.
Every once in a while, my Mac Pro will get disconnect to the basestation, and when I go to the Airport Signal icon, I can see both my basestation. I just have to select it again as if all of a sudden, my Mac Pro forgot which basestation it is connected to and get totally confused. It is one thing if the signal to the basestation is gone (have experienced that a few times when I have the 802.11g base station), it's something else to just get disconnected for no reason. Of course, when I select my basestation again, everything works fine (not as if it has problem re-establishing connection). This is getting a bit annoying, especially when I am trying to backup my files only to have been disconnected from the basestation. This doesn't happen every time I backup my files. It happens in random and there can be a long time without having drop the connection and then it can drop the connection 3 times in 10 minutes.
Help!

I have read all the other post, but got no satisfying answer other than people saying Apple really screwed up with 10.5.2 and that doesn't really resolve the problem. Plus, it seems to me that most people's problem are with a 3rd party base station rather than an AEBS. My only other option maybe to down grade my Airport Card software, because I think the problem is with the Airport Card driver that's bundled with the Mac Pro, and frankly, I am not sure if Apple is ignoring the problem or working hard on it, but in either case, it's not fast enough in term of damage control.

IPhone not showing in iTunes on Mac Pro, and BLOWS keyboard on two Macs!

I have an extremely annoying issue since I upgraded my original iPhone to 2.0 and 2.1:
- I've got an iPhone (8GB, first gen) with 2.1 firmware
- Mac Pro early 2008
- Aluminium Keyboard (standard)
- iTunes 8
Whenever I attach my iPhone, the keyboard goes dead. Totally. Only way to re-animate it is by unplugging the iPhone and wait 5 seconds, then re-plug the keyboard. This is on a newly created Admin account on the Mac Pro and the iPhone that has been through a total factory reset back to 2.1 today...
And a newly re-installed iTunes 8 on (all computers).
Note my iPhone is no longer recognized in iPhoto or Aperture or iTunes on the Mac Pro either.
However, the iPhone works fine on a Mac Book Pro (newest model).
It does show up and sync on an iMac Intel 2.0 GHy, but kicks the Aluminum keyboard on that machine as well...
What is going on??
I will have to double-post this in iTunes and iPhone section, apologies in advance, but this is just too ridiculous... someone must have an answer to this. At least an explanation. I have been through every single USB port on my Mac Pro.
Apple "Genius" in Apple Store Regent Street recommended an archive & install of Leopard 10.5.x. Yeah right. I am working on this machine, I have not got time for that silly idea...
The thing is, this all worked fine before the 2.0/2.1 update... but why is the bl oo dy thing working on a new MacBook Pro and not on my Mac Pro?

// Apologies for cross-posting this in three threads, but as it - at least for myself - provided an instant solution to a nagging problem, it should be alright. //
Alrighty, here we go - today I FINALLY made successful progress WITHOUT having to re-install my entire system...
I figured it was very weird that my iPod Mini would work fine on my Mac Pro USB ports, as all other small devices did too, but that the iPhone (first gen) would simply not trigger any reaction whatsoever.
The iPhone could be ruled out from being the funny one as it was instantly recognized on Macs in the Apple Shop. As I really did not feel I had time to archive & install and whatnot on my work machine, and the fact that I always thought my Mac Pro should have a few more (USB) ports, I researched suitable internal USB expansion boards.
After reading up about it, I decided to get this one: *Sonnet Allegro Express USB* - this card installs in seconds - you simply sht down your Mac Pro, pull the mains plug, take off the side door, unscrew the two thumbscrews holding the blind plates towards the back, take out one of the blinds, push the card in carefully but all the way in, re-attach the blind-holding plate and fire up your machine.
I plugged my regular iPhone dock into the back, pushed in my iPhone, and was instantly greeted by the short humming of the iPhone! Starting iTunes, the iPhone popped up in the side bar again - my precious iPhone is back alive and happy to sync contents!
Very happy to finally have found a solution.
If anyone tries this, I really hope it works as good for you as it did for me - if it doesn't, then for about $50 you've at least got those extra four USB ports on the back of your Mac Pro you always wanted
Good luck!

Boot camp, MAC pro and windows XP

Hi,
I am leading a programmers team, what we want is the faster machines to improve performance. Currently investigating an HP machine with windows XP 64 on it. But that doesn't work for us as most of hour programming tools do not work under XP 64. We cannot install 32 bit Windows because of the 2 Quad cores in the machines (according to IT).
Solution could be MAC pro, same specs (2 quad cores and 4 GB internal memory ) but with Boot Camp I can install XP 32. Or am I wrong? Or will MAC pro with XP 32 do not give an performance increase we can expect with 8 core?
Robert

Hi Robert,
for the IT guys: XP Prfessional does support up to 2 processors with multiple cores each.
XP Home does only support one processor with multiple cores.
The main problem with Mac Pro and 32-bit Windows XP or Vista (and possibly with the HP machine, too) is, that because the expansion slots are reserving quite some parts of RAM for their own Range of Adresses (even if no expansion card is in them) from the 4GB of RAM you will only get about 2GB for XP Pro 32-bit to see and use.
Only chance to use the full amount of RAM is 64-bit Windows and then Vista is the one to use, because Apple does not provide any drivers for XP-64 bit.
Regards
Stefan

New Mac Pro and LED cinema display

Sorry if this has been asked before, I tried searching for it but none of the topics answered my question specifically enough.
I have a 24" Apple LED Cinema Display purchased less than a year ago. Will it connect to a new Mac Pro and what happens to the power cable that's attached to the LED display?

I have a 24" Apple LED Cinema Display purchased less than a year ago. Will it connect to a new Mac Pro
Yes. All the standard cards that come in the Mac Pro have one Mini DisplayPort. The 24"LED display will plug into that.
and what happens to the power cable that's attached to the LED display?
It is not used if you don't have a MacBook.

Mac Pro and Airport Cards

Similar Messages

Maybe you are looking for