Mac Pro and FCP/Motion Crashing

Hi,
My new Mac Pro is fast BUT crashes a lot. It crashed during a render and also in complicated motion projects. I am wondering if I should upgrade my RAM or add another graphics card to fix this -- I cannot do both at this time. My old computer never crashed (G4). I finally went to one monitor and that help a bit but I still had crashes. I have 2 GB of RAM and RadeonX1900 graphic card.
It works just fine on all other programs.
Mac Pro 2 x 3 Ghz Duel Core Intel   Mac OS X (10.4.8)   2 GB RAM

What format are you editing?
4x3 NSTC
How many drives in the machine and how much free space on each one?
One internal drive 108 GB left. One external G-raid 12 GB left.
Where is the media stored?
Scratch disks on on the G-raid hard drive and render files etc are on internal drive, still photos and motion files on main drive.
Is the RAM from Apple and is it all the same size (i.e. all 512mb modules)?
All the RAM came from Apple and Apple installed it. It is all 512 MB
Any 3rd party filters applied?
Yes, a few of the clips have Nattress filters. I have the 24P turned off. This takes a long time to render on the old machine too.
Does it crash on a particular project or using a particular effect?
Motion crashes the most with projects that have many layers and using the particle generator. This motion project my old G4 could never handle.
Does it crash at the same place on a timeline or randomly? Randomly.
Have you deleted your FCP preferences using FCP Attic or Rescue?
I can do this but does not solve my motion crashes.
so on and so forth ...
again, it did seem to help when I went to one monitor. I am using 2 View Sonic 19 inch monitors.
I am still under my 30 Apple help and I am worried if others have the same set-up and no crashes.

Similar Messages

  • I don't have clean ideas about Mac Pro and FCP in RT

    Hi, I hope you can clarify my ideas about editing in RT.
    I will purchase a HDV camera and I'd like to work in RT with FCP and Mac Pro.
    Many people tell me I don't need any additional card and even I don't need RAID. Can you tell me if I can work in RT with FCP, Mac Pro and 4GIGs RAM only?
    thanks

    When I have to export the film from Timeline will I have to do rendering?
    RT editing in FCP, for the most part simply means that there are certain things you can see happen in the timeline without rendering... a certain number of simultaneous streams or tracks, certain transitions/effects/titles etc.
    How much you can do RT is determined by a number of factors... the speed/power of your computer and drives, the video format your cutting... you'll get less cutting HD than you will cutting HDV or DV25. With the type of timeline you're describing you shouldn't have any trouble seeing what you're cutting RT.
    However, regardless of how much you see RT, any effects, transitions etc. have to be rendered in order to output or export. In other words, even with DV footage, unless you've got a straight cut timeline with no titles or effects, you're always looking at at least some render time to get things finished. And as David has said, HDV also requires conforming (the whole timeline, not just effects) which, depending on the length of your show can take some time.
    rh

  • Mac Pro and FCP - Very Unstable

    I just purchased the Mac Pro and installed FCP 5.1.2. I have a dual 2.6 Ghz with 2.5 TB external eSATA Raid (using the Sonnet E4P card), Kona LHe Card and 3 GB of RAM.
    1. FCP, Quicktime and Shake each unexpectedly quits on playback of video within a few minutes of opening and
    2. Video in FCP and Quicktime has blocky (colored lego) defects and corruption.
    I suspect this may be the RAID or Quicktime, but this is about the most unstable FCP setup I have ever experienced since FCP 1.0.
    Any suggestions? is it my RAID controller card, Quicktime, FCP or something else?
    Thanks.

    Just found this for Dan - http://www.amug.org/amug-web/html/amug/reviews/articles/sonnet/e4p/
    Scroll down a bit - they recommend using it in an appropriate slot - something else to check ....
    oh sorry - that's for a G5
    http://www.sonnettech.com/downloads/adapter_sw.html
    Have you installed the Serial ATA Firmware Updates/Drivers from Sonnet - specific for the MacPro?
    Looks like they're all still in beta ...

  • Which monitor for mac pro and FCP

    Hi,
    I'm using a quad core mac pro with a Dell 2407wfp. In this setup I mainly do FCP editing. The monitor is 4 years old and I like to replace it for a larger one. I recently saw a setup with a Samsung P2770HD full hd and a tv tuner on board. Will this be good enough for FCP editing and reviewing HD content?
    TIA

    Will this be good enough for FCP editing and reviewing HD content?
    Probably not - but I have no experience with that monitor.
    Not what you asked but why not keep the Dell for displaying FCP timeline, bins, etc and purchase a quality HDTV and the means to feed it a hd signal (eg AJA Kona series, various Blackmagic cards, Matrox MXO series, etc) for viewing output?
    x

  • Mac Pro and FCP Studio

    Hi,
    Will the New Mac Pro ( 3 GHz) be faster than my Quad 2,5 for normal rendering in FCP Studio ?
    thanks

    Should be.
    They suggest that it is up to 1.4x faster encoding Mpeg2 (from DV)
    http://www.apple.com/macpro/performance.html

  • I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PL

    I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PLEASE HELP!!

    Hi jim1287,po
    Check for the latest updates. Installing latest updates should resolve this problem.
    Also, try to ran disk repair using safe mode in Mac, for instructions please visit: http://support.apple.com/kb/PH14204
    Try enabling root user profile on mac and try to check. OS X Mavericks: Enable and disable the root user
    Regards,
    Ajlan Huda.

  • My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

    My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

    General purpose Mac troubleshooting guide:
    Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems:
    Isolating an issue by using another user account
    Identifying resource hogs and other tips:
    Using Activity Monitor to read System Memory and determine how much RAM is being used
    Starting the computer in "safe mode":
    Mac OS X: What is Safe Boot, Safe Mode?
    To identify potential hardware problems:
    Apple Hardware Test
    General Mac maintenance:
    Tips to keep your Mac in top form
    Troubleshooting: My computer won't turn on
    https://support.apple.com/kb/TS1367
    Where are your bootable backups and clones stored?
    What do you have to boot from to restore or attempt to recovery files that are not backed up?
    It won't be a PowerMac. People tend to think they look alike? or mean the same thing.
    http://www.everymac.com/systems/apple/mac_pro/specs/mac-pro-quad-2.66-specs.html
    Try zap PRAM and SMC Reset. If you have ATI 5770 which many have upgraded to you won't be able to use older DVD or systems than 10.6.5

  • I bought a new Mac Pro and migrated my FCP from my old one. But the new old won't accept my product serial number. Help!

    I bought a new Mac Pro and migrated my FCP from my old one. But the new old won't accept my product serial number. Help!

    Was the FCS on your old machine an upgrade? You will need to enter your original, full version serial first, and then you will be prompted for the upgrade serial number.
    Hope this helps.
    MtD

  • New Mac Pro and now no FLV Export option in FCP

    Hi Folks,
    I have a new MAc PRo and just loaded final cut studio 2 and flash 8 onto it.. I know have no option in the quicktime conversion setting to export to FLV?
    Please any help would be huge at this point...
    Oh.. I loaded After Effects 7 to the new Mac PRo and I get the Export to FLV option from AE so what is the deal?

    Hi Todd, I bet you upgraded from a PPC machine.
    The real problem here is that Flash 8 is/was not a universal binary (i.e. an app that is supported on both the PPC and the Intel Macs).
    So the included "FLV Exporter" QuickTime component does not show up in the export dialog even if it's installed as it just does not get loaded.
    (Should be in "NameOfSystemHD/Library/QuickTime").
    If you update to Flash 9/CS3 you get a universal binary app and QT exporter component and it will work again on your (Intel) Mac Pro.
    Btw., the Flash support that was in QuickTime had nothing to do with export - especially not with FLV - but with playback of Flash content.
    Addionally, AE 7 isn't a universal binary either, so you will suffer some pretty serious performance losses.
    Best regards, Oliver

  • Imac vs mac pro for FCP?

    Hello folks,
    Well, my G5 apparently needs a new logic board. I could cry, or be happy at the excuse to get a new computer... I chose the latter!
    Bottom line, what is the consensus regarding imac vs mac pro.
    I will be using FCP a lot, that's what I do for a living. However, I rarely run other applications at the same time. Occassionally LiveType or Photoshop, but that's about it. No Motion, no After Effects, etc.
    I feel that an imac will suffice nicely and that the mac pro is overkill in both cost and amount of computer. It's like getting an Indy car and driving 40 MPH!
    Thoughts? Thank you.
    Eric P

    hmmm, interesting. Of course the mac pro would be better, no doubt. But for my purposes I still wonder if it's worth the cost.
    As for Kevan D's inquirey for more info, yes I work with FCP for a living, at least 50% of my work week maybe more is editing. However, silly little ol' weddings have become the vast majority of my work and they will continue to be for at least a few more years I believe. In that time I do not see HD being a factor in my area. So for the forseeable future I expect to be working soley with SD. That bit of info may change some of your minds to thinking that an imac will suffice.
    I admit, that's my hope because I would have to take out a loan for the mac pro, and again, I'm just not certain it's worth it for my purposes. On the other hand, I didn't ask the question so that I could hear what I "wanted", I do want honest opinions from other professionals like yourselves. If the experience is that an imac just isn't worth it then so be it.
    As far as expandability (is that anything like drinkability??), I understand that, but again for my purposes I suspect that by the time I need to expand to HD or to using the full benefits of a mac pro, a new computer (and equipment) will be in the order anyway. Does that make sense?
    Thanks again,
    Eric

  • Mac Pro and Final Cut Studio 5.1.2

    I've had problems trying to export mpeg files from final cut pro using compressor after having updated all applications to their current versions (FCP 5.1.2, Compressor 2.3, Qmaster 2.3, QT 7.1.3...) including firmware, OS and security updates. Since I was kind of in the middle of a project I ended up reverting back to the original universal crossgrade of Final Cut Studio (FCP 5.1, Compressor 2.1, Qmaster 2.1...) in order to get the desired results of a muxed mpeg. Now, before I go back to trying to resolve this issue of updating the software, I would like to know if anyone is running Final Cut Studio on a Mac Pro with all updates current (5.1.2, 2.3...) and with the ability to export muxed mpeg streams - both audio and video in the same file. Also, I have posted more specific questions regarding these issues in the compressor and FCP forums but decided I needed to hear from some Mac Pro users who have had success with the Final Cut Studio updates. BTW, I have done all the updates of Final Cut Studio (5.1.2, 2.3...) on a G5 quad at work and have had no problems whatsoever. I'd just like to have everything up to date and functional. Other than trying to get this worked out, I have found my Mac Pro to be most excellent. Thanks in advance.

    Dave, thanks for your input. It would crash out during the compressor export and the failure reason would say 3x Crash Server Down in the compressor box. I haven't tried an mpeg-1 because all we broadcast are mpeg-2 program streams. Most of the stuff I export is no longer than 10 - 12 minute segments. If you could, try exporting as an mpeg-2 muxed. Some other possible factors - I had captured the original footage on a G5 quad at work, put them on an external drive and then loaded them onto the Mac Pro and imported them into the project. Could there be a difference between DV codecs of the PPC and the Intel processors? Now that I'm at a stopping point I'm planning on trying to do the update again. Just hoping to catch something I might have missed. If I were a total computer illiterate I would say user error, but I'm not.

  • What graphics card or cards Mac Pro and Dual 30 inch ACD's?

    I am hoping that you can all help with a few questions regarding running two 30 inch displays in a new Mac Pro and using Final Cut Pro, Motion, and After Effects.
    My issue is which card(s) to order... Two NVIDIA GeForce GT 120 512MB or the ATI Radeon HD 4870 512MB.
    Can FCP work off of two different Graphics Cards? I would hook one display to each NVIDIA card via the Dual Link DVI port.
    Or with the ATI, I would hook one monitor to the Dual Link DVI and one to the Mini Display Port with the adapter.
    The ATI is obviously a more powerful card individually; but, two NVIDIA cards would allow for each monitor its own "lane," which seems like it would be an advantage.
    Any advice would be great. I am primarily an FCP user and probably hit After Effects for 25% of my work.
    Thanks in advance for any advice!

    Neither Motion or Color support dual graphics cards.
    FCP used to have issues but they have been addressed in v7 (reportedly).
    The 4870 is the better card by far but don't know if it will support 2 30" monitors. In any case, you are spreading the VRAM over a lot of pixels. You'd probably have better response driving 2 24" monitors.
    x
    fwiw - I don't see the benefit of gigantic monitors. They take up an enormous amount of desktop space, draw a small city's worth of power and don't offer that many more pixels.
    x

  • I had an HP laptop.  Just bought Mac Pro and want to get my music and photos over into my Itunes.  Can I just open up my I tunes in my new laptop and then sync my Iphone or I pod with it and will all the music andphotos move over?

    I had an HP laptop.  Just bought a Mac Pro and want to get my music and photos moved over.  Can't I just open my I tunes in my new laptop and then connect my Iphone or I pod and sync my music into my I tunes?

    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

    I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

    Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
    Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
    Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
    Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
    P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

  • Mac Pro (Late 2013) Keeps Crashing Please Help

    My new Mac Pro (Late 2013) keeps crashing when I use thunderbolt devices.
    My set up is as follows:
    8-Core
    512 SSD
    Dual AMD 700 GPU
    64 GB Ram
    It usually occurs when I am using any of the Adobe programs for video editing and rendering. I have check disc utility and found no errors. Needless to say this is getting quite annoying as I use this machine for work and sometimes can't get through anything because it keeps crashing.
    What do I do?

    Just happened again. This is what it says:
    Anonymous UUID:       51D5171F-CF6C-C4BE-82BD-E6597F55DFE5
    Thu May  1 10:46:50 2014
    Machine-check capabilities: 0x0000000001000c1b
    family: 6 model: 62 stepping: 4 microcode: 1059
    signature: 0x306e4
    Intel(R) Xeon(R) CPU E5-1680 v2 @ 3.00GHz
    27 error-reporting banks
    Processor 0: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 1: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 2: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 3: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 4: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 5: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 6: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 7: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 8: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 9: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 10: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 11: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 12: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 13: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 14: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    Processor 15: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC7_STATUS(0x41d): 0xbe00000000010092
    IA32_MC7_ADDR(0x41e):   0x00000001323ca340
    IA32_MC7_MISC(0x41f):   0x00000001405c5c86
    panic(cpu 3 caller 0xffffff801b0dc709): "Machine Check at 0xffffff7f9cbd0b29, registers:\n" "CR0: 0x000000008001003b, CR2: 0x0000000111da7000, CR3: 0x000000002df83000, CR4: 0x00000000001606e0\n" "RAX: 0x0000000000000020, RBX: 0xffffff80a1019000, RCX: 0x0000000000000001, RDX: 0x0000000000000000\n" "RSP: 0xffffff87308b3d40, RBP: 0xffffff87308b3d70, RSI: 0x0000000000000001, RDI: 0xffffff80a0ea0a00\n" "R8:  0x0000000000000000, R9:  0x0000000000000006, R10: 0xffffff8731783de0, R11: 0xffffffffffffffff\n" "R12: 0xffffff80a0fda6c0, R13: 0x0000000000000006, R14: 0xffffff7f9cbe5e20, R15: 0x00000000000007b0\n" "RFL: 0x0000000000000046, RIP: 0xffffff7f9cbd0b29, CS:  0x0000000000000008, SS:  0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2422.92.1/osfmk/i386/trap_native.c:1 68
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8726d65e80 : 0xffffff801b022fa9
    0xffffff8726d65f00 : 0xffffff801b0dc709
    0xffffff8726d66060 : 0xffffff801b0f3c1f
    0xffffff87308b3d70 : 0xffffff7f9cbc1663
    0xffffff87308b3e70 : 0xffffff7f9cbc0899
    0xffffff87308b3f30 : 0xffffff801b0dd73c
    0xffffff87308b3f50 : 0xffffff801b0375ba
    0xffffff87308b3f90 : 0xffffff801b037908
    0xffffff87308b3fb0 : 0xffffff801b0d7047
          Kernel Extensions in backtrace:
             com.apple.driver.AppleIntelCPUPowerManagement(216.0)[70947979-EA9B-39D1-AD15-CD AB19F031AF]@0xffffff7f9cbbe000->0xffffff7f9cbe8fff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13C1021
    Kernel version:
    Darwin Kernel Version 13.1.0: Wed Apr  2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
    Kernel UUID: E9CF78E2-1E9F-3B6F-81A4-FEE6C6D0E4D5
    Kernel slide:     0x000000001ae00000
    Kernel text base: 0xffffff801b000000
    System model name: MacPro6,1 (Mac-F60DEB81FF30ACF6)
    System uptime in nanoseconds: 12337930919
    last loaded kext at 11985022345: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f9b953000, size 65536)
    loaded kexts:
    com.nvidia.CUDA          1.1.0
    com.promise.driver.stex          5.2.7
    com.apple.filesystems.msdosfs          1.9
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleBluetoothMultitouch          80.14
    com.apple.iokit.IOBluetoothSerialManager          4.2.3f10
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AGPM          100.14.15
    com.apple.driver.X86PlatformShim          1.0.0
    com.apple.driver.ApplePlatformEnabler          2.0.9d1
    com.apple.driver.AppleHDAHardwareConfigDriver          2.6.0f1
    com.apple.driver.AppleHDA          2.6.0f1
    com.apple.driver.AppleGraphicsDevicePolicy          3.4.35
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.kext.AMDFramebuffer          1.2.0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleIntelMCEReporter          104
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.AppleUSBDisplays          360.8.14
    com.apple.iokit.IOBluetoothUSBDFU          4.2.3f10
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.3f10
    com.apple.driver.AppleMGPUPowerControl          3.4.35
    com.apple.AMDRadeonX4000          1.2.0
    com.apple.driver.AppleThunderboltIP          1.1.2
    com.apple.kext.AMD7000Controller          1.2.0
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.driver.AppleUSBOHCI          656.4.1
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.XsanFilter          404
    com.apple.driver.AppleUSBHub          666.4.0
    com.apple.iokit.IOAHCIBlockStorage          2.5.1
    com.apple.driver.AppleUSBXHCI          670.4.0
    com.apple.iokit.AppleBCM5701Ethernet          3.8.1b2
    com.apple.driver.AirPort.Brcm4360          831.21.63
    com.apple.driver.AppleUSBEHCI          660.4.0
    com.apple.driver.AppleAHCIPort          3.0.0
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.1
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.kext.triggers          1.0
    com.apple.driver.IOBluetoothHIDDriver          4.2.3f10
    com.apple.driver.AppleMultitouchDriver          245.13
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.driver.DspFuncLib          2.6.0f1
    com.apple.vecLib.kext          1.0.0
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOBluetoothFamily          4.2.3f10
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.X86PlatformPlugin          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.7.0d10
    com.apple.driver.AppleUSBAudio          2.9.5f4
    com.apple.iokit.IOAudioFamily          1.9.5fc2
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.3f10
    com.apple.iokit.IOFireWireIP          2.2.6
    com.apple.driver.AppleGraphicsControl          3.4.35
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.4.1
    com.apple.driver.AppleHDAController          2.6.0f1
    com.apple.iokit.IOHDAFamily          2.6.0f1
    com.apple.iokit.IOAcceleratorFamily          98.14
    com.apple.driver.AppleSMC          3.1.8
    com.apple.driver.AppleThunderboltEDMSink          2.1.3
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.kext.AMDSupport          1.2.0
    com.apple.AppleGraphicsDeviceControl          3.4.35
    com.apple.iokit.IOGraphicsFamily          2.4.1
    com.apple.driver.AppleUSBHIDKeyboard          170.15
    com.apple.driver.AppleHIDKeyboard          170.15
    com.apple.iokit.IOUSBHIDDriver          660.4.0
    com.apple.driver.AppleThunderboltDPOutAdapter          3.1.7
    com.apple.driver.AppleThunderboltDPInAdapter          3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily          3.1.7
    com.apple.driver.AppleThunderboltPCIUpAdapter          1.4.5
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.5
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          656.4.1
    com.apple.iokit.IOSCSIParallelFamily          3.0.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.driver.AppleThunderboltNHI          2.0.1
    com.apple.iokit.IOThunderboltFamily          3.2.7
    com.apple.iokit.IOUSBUserClient          660.4.2
    com.apple.iokit.IOEthernetAVBController          1.0.3b4
    com.apple.iokit.IO80211Family          630.35
    com.apple.driver.mDNSOffloadUserClient          1.0.1b5
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOUSBFamily          675.4.0
    com.apple.iokit.IOAHCIFamily          2.6.5
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.11
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          23
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.9
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    com.apple.kec.pthread          1
    Model: MacPro6,1, BootROM MP61.0116.B05, 8 processors, 8-Core Intel Xeon E5, 3 GHz, 64 GB, SMC 2.20f18
    Graphics: AMD FirePro D700, AMD FirePro D700, PCIe, 6144 MB
    Graphics: AMD FirePro D700, AMD FirePro D700, PCIe, 6144 MB
    Memory Module: DIMM1, 16 GB, DDR3 ECC, 1867 MHz, 0x802C, 0x33364A534632473732505A2D314739453120
    Memory Module: DIMM2, 16 GB, DDR3 ECC, 1867 MHz, 0x802C, 0x33364A534632473732505A2D314739453120
    Memory Module: DIMM3, 16 GB, DDR3 ECC, 1867 MHz, 0x802C, 0x33364A534632473732505A2D314739453120
    Memory Module: DIMM4, 16 GB, DDR3 ECC, 1867 MHz, 0x802C, 0x33364A534632473732505A2D314739453120
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x135), Broadcom BCM43xx 1.0 (6.30.223.154.63)
    Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en2
    PCI Card: AMD FirePro D700, Display Controller, Slot-1
    PCI Card: AMD FirePro D700, Display Controller, Slot-2
    PCI Card: pci105a,8760, RAID Controller, Thunderbolt@79,0,0
    PCI Card: Apple 57761-B0, Ethernet Controller, Thunderbolt@234,0,0
    PCI Card: pci11c1,5901, IEEE 1394 Open HCI, Thunderbolt@233,0,0
    PCI Card: pci12d8,400e, USB Open Host Controller, Thunderbolt@239,0,0
    PCI Card: pci12d8,400e, USB Open Host Controller, Thunderbolt@239,0,1
    PCI Card: pci12d8,400f, USB Enhanced Host Controller, Thunderbolt@239,0,2
    Serial ATA Device: APPLE SSD SM0512F, 500.28 GB
    USB Device: Hub
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Keyboard Hub
    USB Device: Apple Keyboard
    USB Device: Hub
    USB Device: FaceTime HD Camera (Display)
    USB Device: Display Audio
    USB Device: Apple Thunderbolt Display
    Thunderbolt Bus: Mac Pro, Apple Inc., 19.2
    Thunderbolt Device: Pegasus2-R, Promise Technology, Inc., 3, 19.2
    Thunderbolt Bus: Mac Pro, Apple Inc., 19.2
    Thunderbolt Bus: Mac Pro, Apple Inc., 19.2
    Thunderbolt Device: Thunderbolt Display, Apple Inc., 3, 26.2

Maybe you are looking for

  • Mac shuts down? Already updated firmware.

    My MacBook has been fine since I bought it in May 2007. However, today I had left my MacBook on and plugged in, while a read a book. I turned to my MacBook, and Firefox had shut down. I wasn't sure why, but I just opened it back up. I left my MacBook

  • Why do I need to be signed into my Adobe ID to use Elements Editor?

    Everytime I use Elements Editor I am automatically logged onto Adobe.   Why is this when I always thought Elemens was a Stand Alone piece of software?

  • Technical Support in Turkey

    I bought my phone 3 months ago from greece and I am in turkey now. I can not find any support here that will repair my phone via guaranty. My phone problem is that I can not hear caller.Please Help!

  • How can i open nef files of d7000 inphotoshop cs

    i am not able to open my nef files

  • Saving and opening files in textedit

    i am a brand new macbook (and mac) user and saving my files for default opening with microsoft word, but also want to work on them as textedit as i haven't bought windows for mac yet, and am still on the trial period. until today i have had no proble