Mac Pro and Final Cut Studio 5.1.2

I've had problems trying to export mpeg files from final cut pro using compressor after having updated all applications to their current versions (FCP 5.1.2, Compressor 2.3, Qmaster 2.3, QT 7.1.3...) including firmware, OS and security updates. Since I was kind of in the middle of a project I ended up reverting back to the original universal crossgrade of Final Cut Studio (FCP 5.1, Compressor 2.1, Qmaster 2.1...) in order to get the desired results of a muxed mpeg. Now, before I go back to trying to resolve this issue of updating the software, I would like to know if anyone is running Final Cut Studio on a Mac Pro with all updates current (5.1.2, 2.3...) and with the ability to export muxed mpeg streams - both audio and video in the same file. Also, I have posted more specific questions regarding these issues in the compressor and FCP forums but decided I needed to hear from some Mac Pro users who have had success with the Final Cut Studio updates. BTW, I have done all the updates of Final Cut Studio (5.1.2, 2.3...) on a G5 quad at work and have had no problems whatsoever. I'd just like to have everything up to date and functional. Other than trying to get this worked out, I have found my Mac Pro to be most excellent. Thanks in advance.

Dave, thanks for your input. It would crash out during the compressor export and the failure reason would say 3x Crash Server Down in the compressor box. I haven't tried an mpeg-1 because all we broadcast are mpeg-2 program streams. Most of the stuff I export is no longer than 10 - 12 minute segments. If you could, try exporting as an mpeg-2 muxed. Some other possible factors - I had captured the original footage on a G5 quad at work, put them on an external drive and then loaded them onto the Mac Pro and imported them into the project. Could there be a difference between DV codecs of the PPC and the Intel processors? Now that I'm at a stopping point I'm planning on trying to do the update again. Just hoping to catch something I might have missed. If I were a total computer illiterate I would say user error, but I'm not.

Similar Messages

Mac Book Pro and final cut studio 2

Hi,
Bought a MBP last year and am looking to purchase Final Cut Studio 2 Universal. After looking through some discussions I'm still unsure how well this package will run with my setup. Yes it will be fine, or yes it will run but with some limitations, or yes it will run but I should get a different video card, etc.....? A definate yes or no would be appreciated and any limitations or known issues. I will be using a120GB external hard drive for my video footage.
Thanks, Mick
Sorry if this is posted in the wrong area or if these questions have been answered. I'm new to Macs and forums and wouldn't like to spend that much cash on a maybe!
Mac Book Pro 15 Mac OS X (10.4.9) Intel core duo 2.16 GHz 2GB ram/Radeon X1600 256Mb 80GB hard drive

Yes, it will be fine.
The only limitation is Color which needs an external screen with at least 1650x1050 to be kind of useful though it runs at smaller resolutions.

MacBook/Macbook Pro and Final Cut Studio

I am about to buy a Mac, but im not sure if I should get the MacBook or MacBook Pro? Which is better suited for Final Cut Studio? Is there a specific version of the MacBook/MacBook Pro that would be best? Thanks so much!

Exactly. It will install, but if you have any problems and you need to call Apple, they won't give you any support. If you're going to spend $1,200 on some software, you should pay for a computer that supports the minimum requirements.
-Doug

The difference between Final Cut Pro and Final Cut Studio 2

I'm looking at buying FCP. Can I buy Final Cut Studio 2 to get FCP or is that only a Upgrade and where would i buy it. How do I go about buying FCP and how much is it

Final Cut Pro v6 is only available as a component within Final Cut Studio 2.
What it is, what is included and how to purchase it is spelled out here:
http://store.apple.com/us/product/MA886Z/A?mco=MTIxODk3Mw
x

Mac Pro for Final Cut Studio -- The Buying Guide

I am starting to think about upgrading my "old" Power Mac G5 Quad system to a Mac Pro system. As you might expect, this raises several issues.
What I do: I edit DV and HDV on FCS2. My specs are below. I am looking for the best speed (especially for rendering), stability and video quality I can afford (between $5,000 and $6,000).
Question 1: Is it true that Snow Leopard and FCP 7 are about a year away? If so, please assume for the following questions that I would be working with the full complement of FCS2 applications on the Leopard OS. (How worth waiting for do you think these are?)
Question 2: Without directing me to the various benchmark and testing sites (which I’ve already looked at), can you suggest the actual performance differences I would see (again, using the whole range of FCS2 apps) in the following:
Two 2.26GHz Quad-Core Intel Xeon processors
Two 2.66GHz Quad-Core Intel Xeon processors
Question 3: I have heard that (with the exception of Compressor) FCS can only use a maximum of 4GB of RAM, and that the 6GB that the Mac Pro ships with are already more than it can use. Is this true? Is it true that Snow Leopard would allow FCS to make greater use of more RAM? And would this show up in the programs’ performance?
Question 4: To get the best video performance with my various FCS2 applications, is there a significant quality improvement in moving up from the NVIDIA GeForce GT 120 512MB to one of the other video cards? How would I notice a difference in the quality?
Question 5: Are there any other purchasing considerations I should think about when configuring a new Mac Pro?
Thanks a lot.
Giraut

Well, well, well, you make me think more about my last upgrade of an ATI Radeon 2600 to the latest ATI Radeon HD 4870!
I was looking on the Final Cut Pro thread to find one answer and look what I found, your questions!
Since yesterday night I was seeking the Apple Support threads just for fun and I now have doubts.
I am a Mac Pro (earlier 2008) owner. I upgraded it to 4 x 1.5 Tb Seagate hard drives and 10G of RAM from OWC (Other Word Computing). First let me tell you NOT to buy from Apple Store for your hard drive and/or memory upgrade. They are totally out of price list. I got my Mac Pro first with one 500 Gb Seagate drive. Then I added 2 x 500 Gb hard drives from Apple. I payed them 199,00 $ each
Last September, I upgraded the drive bays with 4 x 1.5 Tb from OWC. I paid them 229.00 $ each!
199,00 $ for 500 Gb or 229,00 $ for 1.5 Tb (that"s 3 times 500 Gb) which one would you take? And we are talking about two models from Seagate running at 7200 RPM, with 32 Mb of buffer.
I mean... What is that?!!?
And the memory! Don't even think about it.
I got first 4GB Matched Set (2 x 2GB) for 147,99 $ in September from OWC and my second order was 4GB Matched Set (2 x 2GB) for 132,79 $ in October.
I payed a total of 280,78 $ for 8GB of RAM while the price for this upgrade on Apple Store woul have cost me 1998,00 $
*+Source Apple Store :+*
*+Apple Memory Module 4GB 800MHz DDR2 FB-DIMM ECC 2x2GB $999.00+*
Multiply that by 2!
Now how much memory would you need?
I am not a Final Cut Pro user, but I use Final Cut Express a lot, with animation QuickTime movies exported from my Astronomy software Starry Night Pro Plus.
Yesterday I posted this into a thread to answer a user :
+Every morning I have my preferred applications started: Mail, Safari, iTune, Aperture and Final Cut Express. I just did a test for you. I started Mail, Safari, Aperture, Final Cut Express, Starry Night Pro Plus (OpenGL Astronomy Software), Terminal, Quicktime, TextEdit and NeoOffice.+
+With all these apps running, I still have 6.48G of Free RAM out from the 10G installed!+
+It's when I start hungry applications like VMWare Fusion running Windows XP, or Quicktime with a lot of movies opened that I could see the memory level going low!+
+Your bottle neck in video editing will probably be the video card, after the disk speed. Be sure to use 7200 RPM disk and eSATA for your video plans if possible. Firewire 800 will works fine on external drive but it could giggle. I had an ATI Radeon HD 2600 that I recently upgraded to an ATI Radeon HD 4870. the drivers aren't ready yet from Apple. We are all waiting for the next OS X release 10.5.7 for the drivers! For now, I am running on Beta drivers.+
+It's hard to say by now if I have better performance into Final Cut Express because the movie I was working on was an animation movie using plans exported from Starry Night Pro Plus via Quicktime and "animation" codec without any compression. As soon as I make a modification, I still have to render the output for smooth playing.+
Now, after some test with Starry Night Pro Plus this morning, I can safety say that Starry Night Pro Plus with Open GL does use my video card extra speed and that my experience navigating into the Universe is much better and smooth.
But honestly, even if I have to admit that I am using the Beta drivers for the HD 4870, I must say that I have very big doubt that Final Cut Express does use the extra power of the HD 4870 compare to the HD 2600!
In fact, I am searching the support thread for this answer.
Does anyone can say if Final Cut Express or Final Cut Pro does make use of the extra hardware feature of the ATI Radeon HD 4870 or not?

MacBook Pro and Final Cut Studio 2

Hello, all. I currently have Final Cut Studio 1 (with Final Cut Pro 5, DVD Studio Pro 4, Motion 2, LiveType 2, Soundtrack Pro, and Compressor 2). I have an old PowerMac G4 from 2003, which Motion doesn't work on (and DVD Studio Pro doesn't run so great on, either - I haven't worked with Soundtrack Pro, LiveType, or Compressor too much). I'm thinking about buying a new MacBook Pro, and I'm wondering if all of FCS 1 (and especially Motion) would work on either the 13" or 15" models.
If I got a 13", here would be the specs:
2.53GHz Intel Core 2 Duo
8GB 1066MHz DDR3 SDRAM - 2x4GB
250GB Serial ATA Drive @ 5400 rpm
SuperDrive 8x (DVD±R DL/DVD±RW/CD-RW)
NVIDIA GeForce 9400M graphics
If I got a 15", here would be the specs:
3.06GHz Intel Core 2 Duo
8GB 1066MHz DDR3 SDRAM - 2x4GB
500GB Serial ATA Drive @ 7200 rpm
SuperDrive 8x (DVD±R DL/DVD±RW/CD-RW)
NVIDIA GeForce 9400M + 9600M GT with 512MB
Anyone have any experience with running an older version of FCS - or even FCS 1 - on a setup like the ones I described above?
Thanks, everyone,
Kevin

Short answer: 13", no, 15", yes

MacBook Pro and Final Cut Studio

I'm trying to put together a mobile editing system. From what I've researched regarding the type of camera I'll be using, a MBP and FCS seems to be my best bet. I've primarily been a PC guy. However, I'm let down by the additional peripherals and high cost of editing programs on the PC, so I thought I'd dabble in Macs for a bit.
I've had a chance to work with FCP before, but I'm worried about picking up a MBP that is too slow. Also, Color's requirements include a 17" monitor. However, I'd probably already be so far into post-production by that point that I'd use the MBP with a larger Mac monitor instead.
Am I on the right track here? I'd love to hear some input and experiences!
Thanks in advance!

Well, there's no such thing as 1050p60. You need to simply use the easy setup that matches the format of the material on the tape. It's most likely 1080i60. If shot in the US... if not post back.
The Easy Setups are found in the Final Cut Pro Menu... Just select the format of the tape (it will show on the on screen on the camera's LCD during playback. You may have to turn this feature on on the camera/deck if it's not already displaying the playback format.
The easy setups will also set your sequence settings correctly... If you have to render a clip when you just put it in a sequence, it's because your sequence settings don't match the format of the video being placed in it. The Easy setup for HDV 1080i60 will make things great as long as that is the format of the source material. Which I'll bet that's what it is. (it's the most common of the formats).
Why do you have to capture the audio separately? Was it recorded on an audio tape or something? If so you'll have to sync it in a sequence like it was an audio ciip... then if you want it to be the same as an audio/video clip, you need to use the "merge clip" command, after you've established the sync for each clip. A pretty tedious process I'm afraid. Read about "merged clips" in the online manual.
Jerry
P.S. It's pretty bad form to "threadjack"... don't do it next time. Start your own thread...

New Mac Pro and Final Cut Express HD

Ive just taken delivery of a new Mac Pro 2.8ghz quad core with ATI Radeon HD 2600. I've tried to open Final Cut Express HD and am getting an error message
' This software requires certain hardware or software which is missing -
AGP graphics card"
I've tried re-installing but no luck, any ideas ?
Thanks

Hi(Bonjour)!
You can use keyframe on filters from version 3.5 and later. And the new FCE HD 4.0 (who doesn't includes soundtrack nor the complete content of livetype library) includes newer filters and supports AVCHD.
Michel Boissonneault
Message was edited by: Michel Boissonneault

Mac pro and Final Cut pro

I am trying to install Final Cut Pro onto my new Mac Pro. I keep getting the message "Re: This software requires certain hardware or software which is missing. * Power Macintosh G4/350 megahertz (MHZ) or faster * AGP graphics car.
My system is a Mac Pro 3,1 Quad Core Intel Xeon 2.8GHz with a ATI Radeon HD 2600. Why am I having this problem?

If you have a previous version you can buy an upgrade. The upgrade only requires the original serial number. What version do you have? The upgrade isn't viable for all versions. I think only 4.5 on up. Contact Apple...
Shane

Advice before buying Macbook Pro and Final Cut Studio

Hey there
I'm looking for advice before I buy my first Mac.
Currently editing SD video using Windows PC, Quad core, and Sony Vegas Movie Studio.
Now I want to edit HD (from Canon5Dii) and plan a move to Macbook Pro & FCStudio.
What hardware configurations of MBP (with FCS) have folk out there got, and how well do they run?
Eg. Do I need the 8GB memory?
Any peripherals I MUST have
Thanks in advance
Aye
Message was edited by: sam4rufus

Any peripherals I MUST have
Fast, external hard drives for media storage. Don't use the internal system drive for this. Don't even consider using USB drives at all.
All MBPs limit you to FireWire 800 drives, which are OK for lower bandwidth video like HDV and AVCHD.
Although the 17" model also has an ExpressCard slot that can be used with an eSATA adapter to connect much faster drives that provide throughput that FireWire cannot achieve.

Final Cut Studio and Final Cut Studio 2

At work, we have a Mac Pro running Final Cut Studio (original) and recently acquired a G5 and would like to purchase Studio 2 for it. Are Studio 2 projects compatible in any way with Final Cut Studio? Are there any compatibility packs for this?

FCP projects are not backwards compatible so a project created in FCP 6 will not work on FCP 5.
The workaround is using [XML exports|http://developer.apple.com/appleapplications/fcpxml.html].
G.

Retina mac book pro and Final Cut Pro x

retina mac book pro and Final Cut Pro x is crashing when I use any keying filter. It doesn't should color wheels or grey scale sliders and when I click where they should be they crash. Any ideas?

I actually trashed the prefs three times before I reinstalled the whole app. Here is the screen shot. Notice under color selection sub menu no color wheel. Everytime I click in that general area, it crashes.

Hello- I have final cut pro X and final cut studio. Should Compressor 3.5.3 work with fcpX. Whne I try to export to it aI am told I must go to i-apps and buy compressor.

Hello- I have final cut pro X and final cut studio. Should Compressor 3.5.3 work with fcpX. When I try to export to it aI am told I must go to i-apps and buy compressor.

No, FCP X will only work with Compressor 4.

Black Magic Intensity Pro Card & Final Cut Studio

I'm in the process of purchasing a Mac Pro to use for my New Wedding Video Business. I have purchsed the New Sony HVR-HD1000. I'm looking to get everything at one time and something has me very confused. I hope that someone can please help me.
As I understand it. I take my New Sony HD Cam via Firewire800 and Final Cut Studio will just suck it all in.
If thats the case, What is the need for products such as the "Black Magic Intensity Pro Card"?
Do I need it when my Mac Pro/Final Cut will import my footage anyways?
Please help me make a sound decision.
Thank you for your time.

No disrespect taken. I might not be very technical but some times I wonder if I'm doing the right thing.
Maybe some history will help explain my situation.
I have a old cheap-o hand held Sony SD Mini DV Cam that I used all year to puts around with. As a test of my skills went to weddings and events for fun. All of these events had "Professional Videographers" I was just here for fun with my little camera.
For fun I would turn in my little DVD and the response was incredible. Even though my footage sucked compared to all the "Pro Cameras" being used it was my skills in editing, having fun with the video, and using lots of Motion graphics and titles. I became so popular that people wanted me to actually film events as a paid rig!
With no training what so ever and just tinkering with Final Cut Studio - I have a long list of "word of mouth" gigs with people waiting for me to film for them.
My parents then decided to give me a few gifts. (1) Sony HVR-HD 1000 and (2) JVY GY100HD Cameras. I now have all the gear I need. I never owned cameras like this before so as I started looking into getting a Mac Pro - All these questions came to mind.
My point is - I used a POS camera and consumers ate it all up. I didnt worry about "Color Space" or ProRess anything. I just imported as DV - edit the footage - have fun with it - burn it on DVD and call it a day.
I'm just seriously asking - now that I have nice cameras that didnt cost me a dime - cant I just continue the same way I have been with my POS camera?
Is anything more than just Firewire800 to my Mac really that critical for Weddings on SD DVD's?

Logic Studio 2 and Final Cut Studio 2...will they play ball?

I just bought Logic Pro Studio2 and it will not allow me to install STP3 and Compressor 3.5 because of my current copy of FCP Studio 2 that is installed onto the same machine.
What is the work around for this? It would be nice to be able to use the newer software. Could I just uninstall STP2 and Compressor 3 and then attempt the install again with Logic Studio 2 and let it do its thing?
Thanks guys in advance.

Hello and welcome to the forum.
Final Cut Studio is a suite of applications for many video-related tasks. The video editing component of FCS is Final Cut Pro. The main differences between Final Cut Pro and Final Cut Express are FCP's ability to handle natively many different types of media (particular HD) and its media manager and color correction tools.
Final Cut Express is functionally similar to FCP, but works with a limited range of video formats, resolutions, etc. Working in FCE is excellent preparation for an eventual move to FCP if your needs grow, but many people find that FCE fulfills their needs at a fraction of the price.

Mac Pro and Final Cut Studio 5.1.2

Similar Messages

Maybe you are looking for