Mac Pro as Apple TV?

I'm looking to buy a new Mac Pro soon and wondering the best way to use it for movie/TV/sound system too. Can I use the Pro to serve as an "Apple TV" with cable to another room for viewing on a plasma TV (Samsung 1080 50" maybe)? Also is DSL good enough to use for an AppleTV subscrip?Thanks ahead.

I think a Pro may be a bit overload but it can be done. I assume you just want to dual purpose your main workstation. You'd just have to connect up to your TV HDMI and get optical sound output to your audio receiver. You'll have to be in close vicinity to your TV or pay close attention to distances for your cables. If in a different room then you'd have some long cables, maybe too long, and have to work out remote issues or hop room to room to play/pause/etc.
I went a different route however using a Mini with a large external HD in my TV console as Plex media center + AFP home server. I continue to use my PowerMac as a workstation and backup everything to Airport disk. You may want to go that route and buy a Mini and iMac for same price.

Similar Messages

I sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay

i sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay

never mind i got it by going into my account and veiwing hidden items and there it was

Windows and Mac Pro w/ Apple RAID card

It happened i have a need to run Windows natively on Mac Pro with Apple RAID card installed.
I know there is no Windows driver for that card, but i had a hope to bypass RAID card via connecting of internal SATA drive directly to iPass(SSF-8087) connector of Mac Pro's motherboard and using of that drive for Windows.
So, i've connected SATA drive this way and it works fine with OS X.
But i can't even try it with Windows because Mac Pro doesn't boot up from Windows installation CD if Apple RAID card installed
Empty black text console is all that i've got after selecting of Windows installation CD in EFI boot menu.
I need a suggestion how to bypass my problem, or generally speaking, how to install Windows onto Mac Pro with Apple RAID card.

I've tried that.
Installation and booting of WinXP passed OK if RAID card removed.
But i've got black screen again trying to boot WinXP after RAID card re-installed.

HT1218 I pad and mac pro including apple store, accept my apple password but the HD TV apple movies does not. I worked fine until two weeks ago.

My apple password works with IPad,mac pro and apple store. Apple movies do not accept the same password. It all worked fine until three weeks ago.I have changed nothing

Username and password are not apparently an Apple Care issue they refer you to iTunes support (email) to resolve this issue with iTunes and Netflix account

Downloading mountain lion damaged my hard disc. I took my Mac Pro to apple book store. They are unable to repair it and suggest I purchase a new hard disc for $160. It was a perfectly functioning Mac Pro that got damaged by downloading mountain lion.

Downloading mountain lion damaged my hard disc. I took my Mac Pro to apple store. They are unable to repair it and suggest I purchase a new hard disc for $160. It was a perfectly functioning Mac Pro that got damaged by downloading mountain lion.

Software upgrades do not generally damage hardware; your drive's failure must be co-incidental. On most MBP's, a hard drive is very easily replaced by a user. You might want to check out this site for both hard drives as well as install videos (check which model you have so you can check the correct video):
http://eshop.macsales.com/installvideos/
hard drives:
http://eshop.macsales.com/shop/internal_storage/hard_drives_and_SSD
I just recently upgraded my MBP with an SSD; I purchased an kit with an external enclosure from OWC and cloned the current drive to the new one, installed the new drive and was done in no time.

How do i connect my Fujitsu Tablet + mac Pro to Apple Cinema Display 23'?

Dear Mac users
thanks in advance for your help.
I currently own:
• Fujitsu T 4220 (tablet) – Mobile Intel 965 Express – 60 Hertz – goes up to 1680*1050 (guess SXGA) – (it has the following other supported resolutions: 1400*1050, 1280*1024, 1280*768, 1280*720, 1024*768, and 800*600)
• Mac Pro
• Apple Cinema Display 23’
What I would like to do is, please refer to the jpeg posted on http://www.flickr.com/photos/34831802@N06/3234336204/, connect – at the same time – my tablet pc and my Mac Pro to the 23' Apple Cinema Display and switch (when I need) from tablet to MacPro using the same 23’ ACD. Top would be to be able to switch for one to the other while they’re both switched on. Usually on 2 pc’s with vga I’d use a switch A → B (in the jpeg it would be I → E) with a selector.
Have been reading different posts such as: http://discussions.apple.com/thread.jspa?messageID=8000641&#8000641 or http://discussions.apple.com/thread.jspa?messageID=6530475&#6530475 or
http://discussions.apple.com/thread.jspa?messageID=7417258&#7417258
+ others on the net and have (hopefully) understood that:
a) from Vga to Dvi I need a converter such as Geffen’s or similar
b) the problem with ACD 23’ is that it has only 3 resolutions: 1024*640, 1280*800 or 1920*1200
In the attached image I guessed a connection in order to connect – at the same time – both the machines to the 23’ ACD:
1) my fujitsu tablet (i in the image) has to be connected, with a Vga cable (h), to the Vga → Dvi converter (g).
2) from the Vga → Dvi converter (g) I need to connecto to the Dvi switch (c)
3) easier is connecting the Mac Pro (e), since I only need a Dvi cable (d) to connecto to the Dvi switch (c)
4) the Dvi switch (c) will then be connected to the 23’ ACD with a Dvi cable
Now, my questions are:
a) is the solution described above (Vga cable (h) to the Vga → Dvi converter (g)) a good solution or should I use, instead, a docking statione that comes with a Fujitsu Port Replicator (FPCPR65) which has a 1 x DVI-D port?
b) Given the 3 resolution accepted by the 23’ ACD (1024*640, 1280*800 or 1920*1200), I do not understand if I can use my tablet through a Vga to Dvi Converter and at which resolution (my tablet has the following other supported resolutions: 1680*1050, 1400*1050, 1280*1024, 1280*768, 1280*720, 1024*768, and 800*600).
c) Is there a way, also using an external video card or converter, to bring my resolution from 1680*1050 to 1920*1200? (the 16:10 ratio is in fact the same = WXGA (1280x800), WXGA+ (1440x900), WSXGA+ (1680x1050), WUXGA (1920x1200)
d) Talking about Vga → Dvi converter (g), am aware of the gefen product. Can you please list some others that might be good as well?
e) And how about the DVI switch? Any will work? Any particular suggestion?
Thank you very much for your help.
If you have any other suggestion, please let me know.
Regards,
Emil

Noone to help me?
No ideas?
Thanks,
Emil

Using a Mac Pro w / Apple Internal Hardware RAID Card?

Anyone using a Mac Pro with a Apple Hardware RAID Card 2010?
( I have a 12 Core )
Is it worth the $600-700 ?
How much faster than the software RAID 0?
I see Hamm's RAID tips chart .. but it doesn't include such options .. plus it is based on a PC system.
Any tips would be great ..
I find many areas where the application is slow / unresponsive .. and I'm not sure where the bottleneck is ... Maybe the hardware RAID will solve it?
I'm really am impressed with CS5 .. it would be even better with some adjustments .. but I am absolutely disappointed with sluggish performance on my top-of-the-line Mac Pro 12 Core.
This is not what I expected for a $8,000 machine.
Some users says that the port of CS5 for the Mac has taken a back seat to the Windows version at Adobe.
I can't imagine that Adobe would not put 100% effort into Mac products.
Go Team!!!

I have a 2009 Mac Pro 3.33GHz Quad core w/ Apple RAID card, 16GB RAM from OWC, and Apple's Radeon HD 5870 GPU.
I have RAID 0 set across 3x1TB drives internally, and the standard 640GB drive for OSX and all program files. I set all video assets, renders, previews and such on the 3TB RAID.
This seems to work wonderfully. I built this system specifically to edit a feature film shot on P2 DVCProHD, and I've been impressed with how it handles it. This was all built prior to CS5, which took me by surprise. Had I known nVidia would become such a problem for Apple, I would have built a PC, but that's another story.
I just started a new project in CS5 on the same system, this time using H.264 video from my Nikon D7000, and so far, it seems to play just as nicely, despite not having hardware acceleration via CUDA technology. Yellow bars on top, even. I haven't had any problems with clips taking a long time to populate on the timeline or any of that, so perhaps the RAID card helps there.
All this aside, I've already decided to upgrade my RAID for another reason. Right now, my backup is performed via an eSATA-connected external drive through a PCI eSATA card. After every edit session, I dump everything on the RAID onto the external drive, and it goes much faster than the old FW800 transfer used to. I'm about to replace my Apple RAID card with an Areca card and set up a 4-bay RAID 3 via an SAS connection. This will allow for excellent data throughput while offering more security than my current RAID 0 / manual backup system, and free up the internal drives for backups, exports and render files.
I believe in hardware RAID, but I'm not as knowledgeable as Harm and others are about it. I had my Mac built to order with the Apple RAID card, so I have no experience using Premiere with a software RAID. Due to my smooth experience using it, I think it was worth it, but plenty of people say the Apple RAID card is rubbish, and to go with Areca or Atto cards. I didn't know about them until after I built my system, and even though it will cost a couple thousand to upgrade my RAID from this point, I expect to have an even better system than I already have.
I hope this helps, and feel free to ask any questions I didn't address.

Adobe Acrobat 9 Pro on both my Apple Mac Pro and Apple MacBook Pro

I think I found the answer to my question: "May I install my copy of Adobe Acrobat 9 Pro on both my Apple Mac Pro and on my recently purchased Apple MacBook Pro?" I think my question was answered in reading the text of the agreement for use of this site in the following:
"You may activate the Software on up to 2 devices (or virtual machines) at a time, if these activations are associated with the same Adobe ID for the same individual, unless stated at http://www.adobe.com/go/activation . However, you may not use the Software on these devices simultaneously."
If this is correct, would you confirm. I know how security conscious Adobe is with their software.
Thank you! Be Safe!
Ken

Hi kennethf71183385,
Thank you so much for asking! Yes, you are entitled to activate your copy of Acrobat on two computers. Please see Activation & Deactivation Help - Adobe Support for more information about activating Adobe software!
Please let us know if you have additional questions.
Best,
Sara

2008 Mac Pro and Apple Cinema Display 27"

Is there some sort of adapter that would allow me to plug the new Apple Cinema Display 27" with a 2008 Mac Pro? Or what change would I have to make to be able to work this out?

Adrian - did you end up getting an adapter and using it? I purchased the Atlona DVI to Mini DisplayPort Converter (AT-DP200) to connect my 2008 MacbookPro (with GeForce 8600M GT) to the new 27 in. Cinema display, and though it works, it looks a bit fuzzy in terms of resolution. Having read the response here about making sure it is a DUAL link converter, I was going to try to return it for the AT-DP400.
Then I read another thread on here that seemed to indicate that the AT-DP400 would not work at all with the 2008 Macbook Pro.
http://discussions.apple.com/thread.jspa?threadID=2585380&tstart=0
So now I'm confused. Just wondering what your experience is, if you ended up with getting the display and converter.

New Mac Pro and Apple Cinema Display

Warning, for those of you upgrading to the new Mac Pro and you plan on using your old Cinema Display, you will not get the maximum resolution out of the display. In fact, you only get 1650 x 800--which of course is way under utilizing install resources and on top of that not a great picture. Even using recommended set up (mini display to DVI adaptor) does not help. You need a Thunderbolt Display for best video performance. Unless someone out there knows a way to do this--be prepared also to buy a new display.

Turbostar, it is the Apple 30 inch cinema display. Yes it works but the max resolution is 1650 X 800 which while acceptable does not get me 2560 x 1600 which my D500 GBUs would deliver. The new Pro is optimized for a Thunderbolt display, I am using the correct connection protocols as recommended by Apple on their web page for this system. There is a specific note in Apple support noted that Cinema displays will only provide xxxx resolution on the new Mac Pro's. Corsair.

Better Mac Pro display: Apple 23" Cinema HD or Dell UltraSharp 2407WFP?

I bought a Mac Pro a few months ago and want to upgrade my monitor. I'm currently using (via an adapter) the 17 incher that came with my old G3. Compared to the 2407WFP, Apple's display is an inch smaller, about $300 more (with applicable government discounts), with a 3-year warranty as opposed to a 5 year warranty with Dell. Anyone have any recommendations based on personal experience?
I am using the base level Mac Pro graphics card. I'm not a gaming fanatic though I'll probably play some on the Mac (as soon as Intel compatible versions come out). Mainly interested in using my computer for graphics and music.
Mac Pro Mac OS X (10.4.8)

Glenn,
This question has been discussed many times in this forum.
Search this forum for:
"2407WFP"
"2005WFP"
"Dell"
"UltraSharp"
and you will find many answers.
The really short answer is: some like Apple and some like Dell.
,dave
iMac (Core2,2.16GHz), PowerBook (G4,1.3), Power Mac (G5,1.8sp), MacBook(C2,2GHz) Mac OS X (10.4.8) Samsung CLP-550N, LAN, 23-inch ACD, 20-inch ACD, 4 iPods

Mac Pro and Apple Care

Hi,
I am taking my Mac Pro to the Apple store tomorrow to get a few things repaired under apple care such as the Super Drive and one of the USB ports which I can not get to work. On my case one of the rivets fom the front of the case is also loose... Any advice ?
Since my HD is encrypted with PGP, Would I need to add a bootable HD in order for the techs to be able to work on my machine?
Thanks in advance for all your help

Loose rivets are considered to be wear and tear, meaning an out-of-pocket repair. Your best bet is to get some strong contact cement, set the rivet, and let it dry for a day.
As for a boot drive, any reasonably prepared technician will have their own boot drive to start from if the internal one is no good. Just be sure to mention your HD's particulars, or else they may unknowingly view it as a "problem" which requires "fixing" (re: horrible unspeakable things happening to your data).

Upgrade from G5 to Mac Pro--no apple TV

I had all my data transfered at the apple store, but no devices in itunes. I have 2 apple TV's which have been upgraded to 2.0 and they were working fine before. I can't find a place in apple TV 2.0 to resync. How do I get my new Mac Pro to recognize my 2.0 apple TV's?
Thanks

remove the itunes library on the appletv (settings>computers).
then you need to add a new library.

Streaming Issues from Mac Pro using Apple TV

I have recently purchased a Mac Book Pro with retina display and tried streaming content using my apple tv (3rd gen). The picture streams (providing my bluetooth is off) but the sound continuously stutter. Does anyone know how to fix this?

Hello PaulKinger,
Welcome to the Apple Support Communities!
I understand that you are experiencing some performance issues with sound while using AirPlay between your Mac Pro and your Apple TV. To begin troubleshooting, I would suggest working through the steps outlined in the attached article.
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Resolve performance issues with AirPlay or AirPlay Mirroring
If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express.
Try these suggestions:
Ensure that other devices are not trying to stream to the same Apple TV at the same time.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If possible, try to locate your Wi-Fi router in the same room as your iOS device and Apple TV.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
Have a great day,
Joe

Mac pro & non apple displays

is it true that some non apple display don't seem to be liked by mac pro. i have a dell E207WEP 20" display and with my mac pro it makes diagonal line ripples. its only with my mac pro. my past quad G5 didn't have this problem. + nothing wrong with my mac pro bc it works fine with apple displays and few others. nothing wrong with my display bc it works with other computers. but i've noticed that when i took the display to the store the same problem occurred which i used it with a store mac pro. is it a mac pro + dell compatibility issue? apple even replaced my ATI HD2600 but it did not fix anything.

its very weird bc this monitor and mac pro isn't meant to be. what do you think about this: http://www.macnn.com/articles/08/03/10/radeon.2600.xt.for.mac.pro/
+
http://www.macnn.com/articles/08/02/25/mac.pro.ati.freezing.issue/

Mac Pro as Apple TV?

Similar Messages

Maybe you are looking for