Mac Pro beeps/bongs the tone 2 or 3 times upon start-up instead of once

Hi, when I was having issues related to my graphics card, my computer was locking up often, and upon boot-up would ring the starting bong or beep more than once. I got my graphics card fixed but now the computer still makes the multiple sounds instead of just the one. And, the beeps after the first one sound a little cut off and incomplete. Any ideas? Thanks.

HI,
Those are standard chimes for most Macs but you could download and install MemTest and check it that way.
Also run the Apple Hardware Test

Similar Messages

The backup disk image "/Volumes/Data/David Witkowski's Mac Pro.sparsebundle" is already in use. Whenever Time Machine starts to backup to Time Capsuel I get the previous error message. I need some help to fix this.

The backup disk image “/Volumes/Data/David Witkowski’s Mac Pro.sparsebundle” is already in use. Whenever Time Machine starts to backup to Time Capsuel I get the previous error message Where can I find this disk image?. I need some help to fix this.
Thanks,
David W

There are multiple answers and solutions if you look just to the right under the heading of More Like This.

User Contributed Tips in the Mac Pro Displays and the Mac Pro forum

*The following User Contributed Tips are located in the Mac Pro > Displays and the Mac Pro forum:*
None at this time.
*The following related tips are located in other areas of Apple Discussions:*
a brody - Using a second Mac as a display for a first
http://discussions.apple.com/thread.jspa?threadID=1587927
Publish date: July 7, 2008
See also User Tips Library

You can use the two graphics cards, but it's only useful if you have more than two displays. It won't give you higher speed.

How can I configure my new Mac Pro to output the timeline via HDMI

How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
Thanks,
GEvans
DarthPro
3.7 QCIntelXeonE5
12 GB
AMD FirePro dual D300 2048MB
OSX 10.9.2

If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
Any more requires ACTIVE Adapters.
The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however i

I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however it is asking for my serial number which I have misplaced. I am unable to trace my serial number anywhere. I have even checked my adobe membership to locate my serial number but it does not seem to have any record which is strange as I have been using this software for over a year now and the previous versions since 2009. Could someone help me in my predicament.

Contavct Adobe support thru chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

When I power up my 2008 Mac Pro I get the "welcome", chime, fan goes on, a light goes on on my Apple monitor and then nothing - black screen. Whats going on?

When I power up my 2008 Mac Pro I get the "welcome chime", fan comes on, a light comes on on my Apple moniter and then nothing - black screen. What,s going on?

what you describe as the "welcome chime" is the indicator that your Mac has passed the Power-On Self test, and if a suitable source of software can be found, booting is likely.
If the screen stays dark, the most likely explanation is a graphics card failure. But it could also be caused by a backlight failure in the LCD, so be sure you try shining a bright light at the screen to be check whether the picture is there, but just not illuminated.
Graphics card failure will end the boot-up process in some cases, and not have an impact in others. Two external indications you can use when your display is not working are: The Caps Lock key, which is under the control of Mac OS X, and the Control-Eject dialog box shown below. Note that the default is Shutdown, so a Mac that shuts down in response to Control-Eject followed by Return is working fine.

I just migrate settings and software from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install.

I just migrate settings and software, include CC, from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install. I have try because every time I restar keep bothering asking for installation, (by the way, the link is not up to date). Will appreciate your help.

never migrate adobe software. it should be properly installed.
uninstall all the cc programs you can, clean and then reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I have a mac pro 1.1. the main hard drive failed. How do I reload OS X 10.7 back in my computer. the app store will not let me reinstall this os. My computer is not compatible OS x 10.8?

I have a mac pro 1.1. the main hard drive failed. How do I reload OS X 10.7 back in my computer. the app store will not let me reinstall this os. My computer is not compatible OS x 10.8?

You need to first install the OS your Mac came on the bundled gray disks. Assuming it's Snow Leopard, you could then login into the App Store using your same Apple ID and password to download and install Lion.
If your Mac is a bit older and came with Leopard, 10.5.x, you can bypass that and install Snow Leopard from your retail disk. The only software you'd need to install separately from the gray disks would be the optional software, such as the iLife suite and other titles not included on the retail SL disk.

I can't get my Mac Pro pair with the ipad

I can't get my Mac pro pair with the iPad

For what purpose? It isn't possible to transfer files by way of Bluetooth from the iPad to Mc.
Stedman

Why is the 'mac pro' missing from the mac store?

why is the 'mac pro' missing from the mac store?
I always enjoyed speccing up machines that i will one day upgrade to.

ooh! i am my third mac pro and i love them, in my opinion it is still the best looking case (inside and out) on the market . Fingers crossed they can come up with something better.

Why no controls on My Mac Pro display for the 9/12 event?

Why no controls on My Mac Pro display for the 9/12 event? I thought it odd that I had no conrols for the event (later in the day) - Just something Apple was trying different. - It was frustrating that I could not pause it , and later, jump to the point where it crashed. (anybody else have that problem?) But later I had my wife look at it on her 24" iMac, and the controls were present and it worked fine. I thought it might be because I had turn off Java; I turned it on and tried it, still no fade in on mouse move controls. Anybody have an idea why? (Apple STILL needs to update the product list on this submit page This is ML 10.8)

After 3 more days, and a reboot, still no controls on THIS video. Everything else seems fine. Even the Apple movie trailers with the same type of "floating" controls work properly. Does anybody have a clue?

Mac Pro connects to the G network on my dual-band instead of N

Hi. My Mac Pro keeps connecting to the G network on my dual-band instead of N. I can confirm the network/router are fine because my Mini connects to the N network fine, on the correct channel and at 270 Mbit/s.
I'm using a NETGEAR RangeMax Dual Band Wireless-N Router. It is capable of simultaneous N and G networks as well as 2.4Ghz+5Ghz.
I've tried every channel and combo. Very occasionally the Mac Pro will register the N network 270 Mbit/s but will drop back to 54 Mbit/s.
More evidence, AP Grapher reports that it is using the G channel (eg 9) instead of the N channel (eg 43).
I also tried a Netgear DGN 2.4Ghz wireless-n router with the same result. That router only runs N, and only at 2.4Ghz, but Network utility reported that it was usually connected at 54 Mbit/s instead of 130 Mbit/s.
Combined with the fact that the Mac Mini works fine suggests to me that my network card is faulty.
Any suggestions before I lug this big beast back to the store for a new card?
Thanks.

I believe I've solved the first problem. The router gave both networks the same SSID by default. I have now set them to
myname-n
myname-g
I can now choose either network and the link speed is reported as 270 Mbit/s or 54 Mbit/s respectively.
However, I can still only achieve peak transfer speeds of 2.8MB/sec and AP Grapher reports 41/270 Mbit/sec unless I switch to 2.4Ghz only, in which case I can achieve 52/130 and 4.3MB/sec, well below 270 Mbit/s or even 130.
Message was edited by: oodlum

HT1338 I own the Mac Pro Desktop with the older OS X 10.5.8. Can I upgrade to a newer version?

I own the Mac Pro Desktop with the older OS X 10.5.8. Can I upgrade to a newer version? Will it affect my docs etc currently stored on hard drive's? How much will this cost?

If you have a 2006 or 2007 model you can upgrade it to Lion - 10.7.x. If it's a 2008 or later model you can upgrade to the current version of Mountain Lion. Doing so requires Snow Leopard 10.6.8:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
Back up your current system to an external drive or to an available internal drive by making a bootable clone:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

Both of my mac pro are using the same messanger phone number

both of my mac pro are using the same messanger phone number how can i changed

If they are both using the same iMessage Apple ID, they "belong" to the same person, so it makes sense that they be addressed together. To use different phone numbers, assign them different iMessage Apple IDs associated with different iPhones. Alternatively, set one to "listen" to the phone number and the other to "listen" to an email address.

Can you turn the power of a Mac Pro on using the wireless keyboard?

I have my Mac Pro tower at the other end of a table and I want to remotely turn it on with the Wireless keyboard or Trackpad.
I have it auto turning on in the Morning but would like to control it in case I shut down by accident from across the room.
Thanks!

The processors in the Mac Pro are socketed so they
can be replaced as long as the replacement processor
is compatible. You could for example get a 2 Ghz Mac
Pro and later replace the Xeon processors with the
3.0 Ghz processors.
That's great news! Thank you so much for your help. Does that mean im limited at 3.0ghz? Is there away to tell what the motherboard can max out to? Lets say I upgrade in three years and i want to put in a 3.5 or whatever may be available then. As long as its the same type of chip do i have that option? Or is 3.0 the max for the current intel motherboard?
Imac G4 Mac OS X (10.3.9)
Imac G4 Mac OS X (10.3.9)

Mac Pro beeps/bongs the tone 2 or 3 times upon start-up instead of once

Similar Messages

Maybe you are looking for