Mac Pro boot from SAN - Can we do it?

I am looking to put a Mac Pro in a data center.  I would like to set it up to boot from our SAN.  I've seen very little information on this possibility.  Ideally my configuration would look like this:
Mac Pro - dual fibre channel adapters - boot from SAN, dual network connection with LACP port bonding, since dual power supply is not a possibility UPS rack mounted with the Pro.
Is there any documentation, or recommendations on being able to boot OS X Mountain Lion from SAN?

You can do it wirelessly, but that will take some time... you could also purchase a Thunderbolt to Ethernet adapter or a Thunderbolt to FireWire adapter. That would certainly be faster. You should be able to purchase either adapter at your local Apple Store or at the online Apple Store.
Good luck,
Clinton

Similar Messages

  • Does Mac Pro boot from extend Device?

    A usb mass-device, a RAID card or other storage.
    Can we use these to bootup Mac pro?

    Probably not, I'm not aware of any PCIe SATA cards that will allow you to boot OSX - RAID or otherwise.
    Sonnet's new PCIe cards definately don't work...
    Quote, from their site:
    "Tempo SATA E4i is currently not compatible with Mac Pro computers. The current cards have been tested to be Mac Pro hardware-compatible. Sonnet is working urgently to post a Mac Pro software-compatible installer to our web site. Check this page for updates."

  • Mac Pro Boot from PCIe SATA Card

    Is it possible to boot a Mac Pro from a PCIe Sata adapter? I bought a PCIe SATA III card to connect to my 64 Gb C300 SSD Drive.  The internal SATA II drives are not fast enough to take full advantage of the C300.  

    Old Thread But Great News for MAc and PC Laptop Owners I know and trust this company and just bought this for my MAc Pro it boots up the hard drive a couple ways.  In Mac hold down the option key and or once in MAc OS tell it to startup disk the external Sata (eSATA)
    Worked 100% on my Mac Pro 2008 and this works on Laptops Mac and Windows
    One catch its expensive but can go up to 6G WOOOOOOOOWs
    Only card out of  TON I have tried that will boot at least MAc OSX dunno about windows/Boot Camp but I think theoretically it will with the "Option" key wait and be patient and once you choose the sata drive maybe you can boot boot camp dunno?   Actually yes you can once you set the startup disk to the esata boot camp windows will boot!!!   Wooooooooot
    http://www.firmtek.com/seritek/seritek-6g/

  • Mac pro booting from older OS

    Does anyone know if I can boot a new Mac pro from an external drive running OS 8.6.  I don't want to give up on iWeb.
    Thank you.

    Apple documentation does not yet reflect that version. Let's hope it contains some [working] special sauce that will fix lots of subtle problems, and will soon be propagated to the existing Mac Pros.
    This is the "latest" versions reflected in documentation:
    Mac Pro
    Mac Pro (Late 2013)
    MacPro6,1
    MP61.0116.B04 (EFI 2.0)
    2.20f18 (SMC 2.0)
    Mac Pro (Mid 2010)
    MacPro5,1
    MP51.007F.B03 (EFI 1.5)
    Mac Pro (Early 2009)
    MacPro4,1
    MP41.0081.B07 (EFI 1.4)
    Mac Pro (Early 2008)
    MacPro3,1
    MP31.006C.B05 (EFI 1.3)
    Mac Pro (8-core)
    MacPro2,1
    MP21.007F.B06 (EFI 1.2)
    1.15f3 (SMC 1.1)
    Mac Pro (Original)
    MacPro1,1
    MP11.005C.B08 (EFI 1.2)
    1.7f10 (SMC 1.1)
    from:
    EFI and SMC firmware updates for Intel-based Macs - Apple Support

  • Will the 2012 Mac Pro boot from Snow Leopard?

    I'm contemplating upgrading my 2008, 8 core intel mac and getting a refurbished 2012 12 core 2.4 ghz mac pro. My plan, regardless of what future mac I purchased, was to keep my old maching ONLY becuase there are times I need to access my old Retrospect backups. Retrospect only works in OS 10.6.8, that is, the version of Retrospect that allows me to access my crusty old backups ;-). These backups are old client projects and can generate me $ from time to time. Anyway, I was toying with the idea of getting a newer mac, and, in the event it would actually boot from this old hard drive with 10.6.7, I would then sell the old mac. Does anyone have the answer to this?

    No. It can only boot from the OS X version it comes with. The 2012 MP requires a version of Lion. Snow Leopard does run on the 2010 model.

  • Will the late 2013 Mac Pro boot from an external drive (4Tb, USB 3) with a cloned Win7 x64 partition on it?

    Hello all,
    I ordered a CTO Mac Pro for heavy rendering and animating work, and I am planning on using bootcamp to install a windows partition (for 3DsMax). As I am now using a HP Elitebook 8770W that has several valuable files and projects on it, I have bought a Seagate 4Tb external Desktop Drive that uses USB 3.0 to use as a backup drive. Now, as I saw that Bootcamp Assistant only supports installing a x64 version of Windows 8, my question is:
    Will a late 2013 Mac Pro using bootcamp assistant boot from an external USB drive with a cloned partition running x64 win7? Or do I really have to buy Windows 8 and install that to my internal SSD, and then use the migration assistant to copy over my projects?
    Thanks!

    Posted? or found in new builds?
    BCA should really just pull whatever the latest drivers are when run. 
    If it is with how it partitions and sets up nMP and its partition for Windows that is another matter and makes sense.
    Some people want UEFI native booting in Windows, and my experieince with that on PCs has been that it boots faster and runs well, but has different partitions that it wants. For one thing, there is now a backup "system reserved" partition, just as Apple GUID has some volume information blocks and backup and areas that were once optional (and if format erase was not able to, it would not create one) are now mandatory.
    Windows 8.1 is req'd, reason a backup should be a big must - is it might overwrite and use another OS's  partition table entries.  Especially when doing UEFI install.
    There was something about which linux OS was safe and how they would each add entries in the table, but one would not place nice.  That one had to be done first or not at all.

  • How do I install Yosemite on a 2nd HDD I have added and have the Mac Pro boot from the new HDD?

    My MacPro's HD seems to be failing. None of the tests I run indicate that, but I get constant spinning balls and everything takes a long time. I bought a 2nd HDD and installed it in the 2nd bayou my Early 2009 Mac Pro. I formatted it and want to install Yosemite and have the Mac boot off the new drive. It is currently running OS X 10.9.5. When I go to update to Yosemite it begins to download. Will it give me the option of which drive to install on? Or will it just upgrade the original Mac's HD?

    A Samsung 850 EVO 128GB SSD $75 now and makes a huge improvement. But get the 250GB which is $99. 500GB $199
    Wish you asked us first   Awesome prices and performance.
    Output from Etrecheck is an easy "quick check" of what your system is carrying around and what baggage it has.
    Move data to a 'data and media library" drive.
    Use CCC to skip the user data folders except ~/Library and clone to SSD
    And might want to save the installer .ESD package for use as clean installer and to be able to boot from.

  • Will late 2013 Mac Pro boot from MacBook Pro (8,1)?

    I have a MacBook Pro which (until the delivery of my new 16 gb RAM Mac Pro) has been my main machine. When it comes I'd like to put my MBkP into Thunderbolt Target Disk Mode and use my Mac Pro as the CPU (et al) for my work. (In this way I'll have the portability of my MBkP when needed and the speed of the Mac Pro when in the office without having to change / keep track of files, etc.) I have an Dell monitor which I'll connect to via Thunderbolt to DVI as I do now from the MBkP. My MBkP has all the latest updates (eg: Sys 10.9.1 and all other updates).
    My question: will this work? Or does the Mac Pro have some minimum system / hardware requirements which won't allow't to boot from the MBkP?
    I await your helps with gratitude....
    MBkP Model Info:
      Model Identifier:          MacBookPro8,1
      Processor Name:          Intel Core i7
      Processor Speed:          2.8 GHz
    With Thanks,
    Bill Geraci  (jer-AW-see)
    Office Technology Coordinator
    Divinity School
    University of Chicago
    <Personal Information Edited By Host>

    Think that is odd, until there is a new unified OS build for everyone, with new hardware like these there will be new builds every couple of weeks usually. 10.9.0 was long before they were ready for more than testing.
    The Mac Pro 2010 went through that, even the 1,1 2006 had about three different builds before a new update for OS X existed.
    OEM builds really are just that and not suitable the way retail is. I don't know how they manage pushing updates out now that it is through the App Store other than those are suitable for multiple Macs. ie, IF I have a new nMP sitting here and I 'goof' and need to reinstall the OS and I was negligant in making a backup with  T.M. or a clone, and I have to do a net-install (no Mac Pro up till now had the feature) what build gets pushed to download for me? I would hope of course it is the build I had or later but until 9.2 is out...
    Which is long winded way of saying, before you make changes, before you do like someone else did couple days ago and migrate from an older MacBook Pro - and carried over out of date and  incompatible versions, and even drivers no one wants to see - make sure you have a double backup safety net.

  • Can a Mac Pro boot off a MacBook Pro in Target Disk Mode?

    Summary: "Are you able to boot a Mac Pro off of a Mac Book Pro in Target Disk Mode?" OR "Will a Mac Pro boot off an OS X install that was made on a MBP?"
    Details:
    I'm finishing a music project that was created on a PPC G5 Quad computer and going to a studio in Santa Monica to complete the final mixdown. My 3rd party software plug-in configuration is unique, and the studio doesn't have all of the software instruments that I do on their 8 core mac pro. My G5 software installation is mirrored to my MacBook Pro, but the MBP doesn't have enough CPU power to play the project back.
    Is it feasible to have the studio's 8 core Mac Pro boot from my MacBook Pros hard drive? Essentially, we'd be using my OS and software on their powerful CPU / hardware. I figure, since they are both Intel builds of OSX, this should be do-able.
    I don't have access to the Mac Pro until I show up to start working.
    Thanks for any input / suggestions!

    The MacBook Pro boots fine in 10.5.8, and loads the Logic project without any faults. The only issue is that a CPU shortage occurs when you attempt to play the sequence.
    Like you suggested, I performed separate UB installations of all the needed software on the MBP solely so I could move Logic projects from one computer to the next without a hitch. (Actually, DropBox does this for me). Migration assistant was not employed in this process due to the PPC / Intel issues you noted.
    I didn't need to mention the G5 as it appears to have caused some confusion based on Kappy's reply, but I did want to explain my work flow thoroughly.
    It sounds like booting the MacPro from my MBP is feasible. I'll mark this topic 'solved' and head over to the studio tonight. I'll post here any anomalies from the session (if any).
    THANKS~!

  • Boot up Tiger from Lastest Mac Pro shipped from Apple

    Ok, I am testing to upgraded our Tiger to leopard for the Marketing department. my problem is, the lastest or current mac pro that from Apple is not booting up from Tiger so I can install it on a 250gig hard drive brand new. I hold down the "C" and nothing comes up to prompt me to install. Mac Pro comes with 6gig and 650gig hard drive leopard, but I need to downgrade the OS to Tiger to test it.
    Any suggestion what I did wrong or you can downgrade OS on this new model from Apple?

    You can't boot the new mac with Tiger.

  • I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it

    I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it

    If you just got it back and it isn't fixed or something else is wrong with it take it back and have them do the repair correctly.

  • Mac pro boot camp partition cloned to MBP?

    i have a 200 GB mac pro boot camp partition with windows 7 on it and between setting it up and getting all my software customized it has been like doing time in a soviet gulag.
    if i create a 200 GB partition on my MBP can i clone this from one machine to another?
    it would save me a heck of a lot of time and aggravation
    TIA
    p.s not sure if this makes a difference but my mac pro is a first generation deal that required amy burning a image to disk or something along those lines...

    Do you know what I do to get 10.5?
    Purchase it if the computer doesn't include it.
    Also, I don't understand why the drivers are going to be on older software that doesn't have Boot Camp bundled with it.
    The drivers are not on a Mac OS X 10.4 CD or DVD. They are on the Mac OS X 10.5 DVD.
    Leopard has Boot Camp bundled with it doesn't it? Isn't part of the deal upgrading and improving the drivers?
    Yes.
    You say in the above "or use up a Windows installation"
    This only applies if the Windows disk or license agreement allows you to create a limited number of installations.
    Are you saying here that I could also reformat the drive with XP on it?
    You could, but there is little reason to do so.
    Do I have to reconfigure my workspaces if I do the second option above?
    If you erase the Windows partition, yes.
    (30311)

  • Convert a Mac Pro Server from January 2007 with OS 10.4 Server to Snow Leopard 6.0 (NON SERVER)

    I have a Mac Pro Server from January 2007 with OS 10.4 Server installed. I want to convert from OS 10 Server OS to just using Snow Leopard 6.0 (NON SERVER). I have two hard drives installed. What is the best way to do this?
    Can I just install Snow Leopard NON-SERVER on the second drive, then switch it into the place of the original main drive?
    Can I switch the drives, then install the Snow Leopard on the replacement drive?

    Not sure how you configured the server, though you can install snow leopard on second HDD and select boot drive with pressing "option" key during startup.

  • Mac mini boot from external disk & clustering

    Can we have a "boot from SAN" possibility using mac mini server and a NAS?
    Another question... is-it possible to have a full redundancy solution by clustering 2 mac mini?
    Thanks for your help.

    Ah, I see, very good question, but I think you may get more/better help from the experts over in Servers area...
    https://discussions.apple.com/community/servers_enterprise_software

  • 1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk? 2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?

    FYI....boot from SAN is required for physical server (T4-1) (not OVM).
    1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
    The SAN disks allocated are visible in ok prompt. below is the output.
    (0) ok show—disks
    a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
    b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
    e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
    d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
    e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
    f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
    g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
    h) /iscsi—hba/disk
    q) NO SELECTION
    valid choice: a. . .h, q to quit c
    /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
    Type “Y ( Control—Y ) to insert it in the command line.
    e.g. ok nvalias mydev “Y
    for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
    (0) ok set—sfs—boot
    set—sfs—boot ?
    We tried selecting a disk and applying sfs-boot at ok prompt.
    Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
    2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
    As we know that ZFS is the default filesystem in Solaris 11.
    We have seen in the Oracle documentation that for rpool below are recommended:
    - A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
    - Create root pools with slices by using the s* identifier.
    - ZFS applies an EFI label when you create a storage pool with whole disks.
    - In general, you should create a disk slice with the bulk of disk space in slice 0.
    I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
    Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.

    Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
    I have seen in the Oracle documentation that for rpool below are recommended:
    - A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
    - Create root pools with slices by using the s* identifier.
    - ZFS applies an EFI label when you create a storage pool with whole disks.
    - In general, you should create a disk slice with the bulk of disk space in slice 0.

Maybe you are looking for