Mac Pro Clicks Off When Waking from Sleep

This is a recurring problem, that is all the more annoying for its lack of consistency. Occasionally when my Mac is sleeping it'll just "click" (it actually makes a clicking sound) and shut off immediately when I try to wake it. Pressing the power button does nothing.
After a lot of trial and error I've found that the best solution is to unplug the power cord and wait for maybe 15+ seconds. Then I plug it back in, press the power button and she starts up like nothing happened--as if we don't both know what happened.
I'm on a good streak now, and it hasn't happened for a while, but given my experiences with it, I can't really relax.
Any ideas? Thanks for your time.
Mac Pro Mac OS X (10.4.8)

I bet it's draw!
Yep, power draw. How about this for a knee slapper:
I had my MacPro plugged in to the same socket as a moderatly
stuffed PeeCee and every time I woke up the MacPro the PeeCee
would click off. The PeeCee PSU wasn't getting enough juice
and just turned off.
Now I have a poor electrical system in the current house that
I'm in. I think the Main breaker is 15 amps and the two that
split off are 10 each. So I can't toast toast and nuke some
cold coffee at the same time that the 3 PCs and the 22" CRT
are on in a lit room without the main breaker tripping. But
without the toaster and nukrowave running the MacPro when
waking up harshly dims all the lights in the house for about
0.5 seconds.
If your Mac is asking for more than it's getting there might
be some smart circutry in the PSU (like there is in most nice
PeeCee PSUs) that turn it off before it causes any trouble.
Make sure it's that only thing plugged into the socket that
you're using for it and see if that doesn't solve it.

Similar Messages

Mac Pro restarts instead of waking from sleep

Since installing 10.5.6, my 8-core Mac Pro (early 2008) has lost the ability to wake from sleep. It seems to go to sleep pretty quickly (if a little faster than before), but when I wake it up by pressing a key on the keyboard, I hear the Mac startup chime and watch as it restarts.
I've manually shut down and booted up a few times now, and the sleep misbehavior continues.
Anyone else? My 10.5.6 MacBook has no problems waking from sleep, only the tower.
--Chris

Well, I thought this was resolved a couple of weeks ago after reading a suggestion that called for doing a controlled shutdown, then unplugging everything including power, waiting a minute, replugging only power, and starting up, using the power button on the front to sleep and wake up. It seemed to be waking instead of restarting, and was working normally for about three weeks.
As of today, I'm back to restarting when I try to wake. I have tried the unplug-everything trick again, and have zapped the PRAM multiple times (seriously, though, does that EVER work?). Nothing helps.
As mentioned above, I'm already on the BootROM version that EFI Update 1.3 provides, so that's not an option.
Thinking the next stop might be the Genius Bar, in hopes those guys have seen this.
--Chris

2008 Mac Pro restarting itself after waking from sleep

Recently, my Mac Pro has taken to restarting itself unasked upon waking from sleep. I just moved to a town with a hot summer, and my room has no air conditioning and gets quite warm. Could the temperature in the room be causing this? I don't think so, because it happens in the cool of the morning after an all night sleep, too.
Another factor I just discovered is that one of my RAM chips has stopped showing up in the system profiler.

Replace the pair of DIMMs first.
Monitor the temps inside.
Install and use SmcFanControl 2.2
Run Apple Hardware Test
You may want to try a clean system install to test with once you have the RAM replaced. Faulty RAM can cause all kinds of issues. And dirty files. Some deeper check for corrupt files than Disk Utility is probably in order.
There is a significant "Inrush-current" on boot and wake from sleep with the 2008s. They need good power, a 1500VA/900W UPS, and sensitive to other equipment on the same circuit.
Inrush current

13.3" macbook pro flickering screen when waking from sleep

I have a Mid 2012 13.3" MacBook Pro (non-Retina) laptop that has been working well, until the last few days. The laptop has had no physical damage and no liquid damage. I have put the laptop to sleep by closing the lid. When the laptop lid is raised and the laptop turns on this last week I have noticed that the screen flickers and then appears to be on, but the screen is a grey color. I have been able to press the power button to put the computer back to sleep. Usually when pressing the power button to wake it from sleep the screen issues have cleared up.
Is there a known issue that may cause the issue with the flickering/grey screen or could there be a short in the wiring that powers the screen?

Hey there Oregan Mac User,
It sounds like you are getting screen flickers when trying to wake your device from sleep. I recommend the troubleshooting form the article named:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
All the best,
Sterling

Power Mac G5 Shuts Down When Waking From Sleep

I picked up a Power Mac G5 for a song at work. It had OS X Tiger 10.4.11, 1 GB RAM and 160 GB HDD, I've since upgraded the RAM to 2 GB, the HDD to 1 TB, and installed OS X Leopard 10.5 from an install disk I had bought when it first came out, and then upgraded to 10.5.8. It works and does what I want it to do.
It refuses to wake up from sleep since I first brought it home.
When it goes to sleep, the power light pulses like it should. However, when I move the mouse or press a key, it does a hard shutdown imediately. I've explored the suggestions here and searched on the internet for a solution.
Here is what I have done:
1.     Unplugged everything but the keyboard and monitor
2.     Replaced the keyboard with another white one that had never been used
3.     Replaced the battery on the Logic Board
4.     Pressed the SMC button on the Logic Board
5.     Did a PRAM reset
6.     Erased, partitioned the disk, and reinstalled Leopard from scratch
There are no extra programs loaded, only Leopard and the programs that came with it.
I've changed the Energy Saver Preference Pane to never sleep:
This is not going to kill me if the best option is to never sleep.
Everyone have a nice day.
Boyd

Boyd Porter wrote:
It is on an APC ups, so it could be a flaky power supply. At least it doesn't do any spontaneous shutdowns, yet, so I can live with it. If it dies, I will buy a new MacMini.
I had a similar sporadic problem with my G5 on a UPS which was failing. The surge on wake was enough to sag the power causing the PSU to kill the power supply. The UPS finally tanked and getting a new one cured the problem. You might see how it reacts on normal mains power as an experiment.
Also, never underestimate the capacity of a G5 power supply to accumulate dust, which reminds me that it is time I blew out my power supply dust, since it's been about a year since the last cleaning.

Mac Pro fans revving after waking from sleep....

Anyone else experience this? Seemed to start after I installed the latest firmware update. After wakign from sleep, my Mac Pro's fans start to rev, but they eventually die down.

Happens all the time. Check out the long thread on "SMC Firmware" for the issues and problems some ran into.

Brand new Mac mini ONLY displays when waking from sleep

Have an unusual problem.
Brand new 2011 Mac mini. Turn it on, and I do not get the grey Apple logo screen or normal spinning cog. Light comes on as normal, and chime chimes as normal. I've tried three different monitors now and I never get a display, unless I put the mini to sleep with the power button in back, then wake it with a keyboard key stroke, the display turns on and works as normal.
As of 20 Sep 2011, I've got all the software and EFI updates installed. I've also reset the PMU, SMC, PRAM, and NVRAM to no avail.
Thanks.
DJ Horton
Message was edited by: DJ Horton

Yes, sure did. Tried different cables and Thunderbolt to video adapters. Don't know if it makes a difference, but I'm using VGA. Originally tried it about a week ago with DVI and it worked ok. The problem is the monitor we're using in our classroom doesn't support DVI or HDMI.

Macbook pro screen dims after waking from sleep?

Does anyone know why my macbook pro screen dims when waking from sleep or waking from my screen saver? I can't get it to stop doing this. Thanks.

It sounds like I have the same thing happening. It's more like the colors are washed out, like there is less contrast. I have a hot corner set up for my screen saver. Once I activate the screen saver for a second and then deactivate it, the Macbook screen goes back to normal. I have a 30" Samsung 305T monitor set up as a second (main) screen for when I'm working at home, which is most of the time. I haven't had it unplugged from the Macbook since this started, so I don't know if it happens by itself. I do know that the Samsung looks fine when waking up from the screen saver at the same time.
I tried to find others with this problem in this forum, but got tired of looking through all the other posts that had nothing to do with this problem.
Can anyone help us?

Mac Pro restarts when waking from sleep

Hi everyone.
I just got a brand new Mac Pro (2 x 2.66GHz), and had Apple upgrade the RAM to 2GB (4 x 512MB). My first problem is that the computer always restarts when waking from sleep, which is annoying! I have reset the SMC by unplugging the machine for a minite, but the problem persists. I have also tried sleeping the computer with nothing plugged in except the monitor and keyboard/mouse, but I get the same problem. All software/firmware is fully up to date.
I have also just noticed that the System Profiler states that there is only 1GB RAM in the computer, even though I am sure that it recognised 2GB when I got the machine a fortnight ago (I even have a screen shot of 'about this mac' to prove it!). Can anybody help, or do I need to phone Apple support?
Thanks,
Matthew

I have a similar problem - hard restart when closing the lid to put it to sleep. It looks like there is a bluetooth issue(?), but I'm not sure what to do with it. We don't have any blue tooth devices in our house. From the console log:
Jan 5 14:57:49 Rigpa kernel[0]: System SafeSleep
Jan 5 14:57:49 Rigpa mDNSResponder: Adding browse domain local.
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall start
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall time: 51 ms
Jan 5 14:57:49 Rigpa kernel[0]: pages 93229, wire 29477, act 34496, inact 2520, zf 1141, could discard act 9830 inact 15765
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall found pageCount 93229
Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen(0)
Jan 5 14:57:49 Rigpa kernel[0]: writing 92989 pages
Jan 5 14:57:49 Rigpa kernel[0]: image1Size 41692160
Jan 5 14:57:49 Rigpa kernel[0]: all time: 5774 ms, comp time: 437 ms, deco time: 0 ms,
Jan 5 14:57:49 Rigpa kernel[0]: image 159194624, uncompressed 276045824 (67394), compressed 158654492 (57%), sum1 529d572d, sum2 c6e9eed5
Jan 5 14:57:49 Rigpa kernel[0]: hibernatewriteimage done(0)
Jan 5 14:57:49 Rigpa kernel[0]: sleep
Jan 5 14:57:49 Rigpa kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 5 14:57:49 Rigpa kernel[0]: Started CPU 01
Jan 5 14:57:49 Rigpa kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Jan 5 14:57:49 Rigpa kernel[0]: System Wake
Jan 5 14:57:52 Rigpa mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
Jan 5 14:57:53 Rigpa configd35: posting notification com.apple.system.config.network_change
Jan 5 14:57:53 Rigpa lookupd185: lookupd (version 369.6) starting - Sat Jan 5 14:57:53 2008

When waking from "sleep" screen turns grey under the pointer and the computer is effectively dead. Have to hold power 'off' for five seconds to regain computer.

When waking from "sleep" the screen appears normal but, the pointer leaves a trail of grey as it moves and the whole screen will turn grey if I keep moving the pointer. The computer is effectively dead. Have to shut down by using power off for six seconds and then re-starting. I know little about computers!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

Since updating to Lion the iMac won't recognise the external hard drive (maxtor) when waking from sleep mode,

Hi All, Since updating to Lion, my imac won't recognise the ext HDD (Maxtor) when waking from sleep mode, I have tried another port, diisc utility (Ext HDD not listed in here) but nothing works. I now find that I have to restart the imac to get the drive recognised..which is fine until the imac goes into sleep mode then I lose the drive and have to restart etc etc.....anyone suffering same issue. The Ext Drive worked perfectly until the upgrade..

Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK. I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions..

Keychain is read-only when waking from sleep

So, when waking from sleep my keychain becomes read-only and I'm forced to restart since many of the applications I tend to use (itunes, safari, skype. messages and disk utility) start giving me error messages or are unresponsive. I've tried repairing the keychain, deleting and creating a new keychain, reinstalling the OS (10.8), resetting the ACLs using the recovery partition, repairing permissions using the recovery partition. The only thing I haven't tried is wiping out the drive and installing the OS anew which I would like to avoid . I am on a 2010 13" macbook pro using 10.8.3. I don't think it started after an update. I did recently install a new hard drive since the previous hard drive died. I used time machine to restore my apps and user account. Advice anyone? Thanks

Hello-
Well I spoke to soon. The problem started a few weeks later. Since then I have installed the OS on to a new hard drive. I did import my user account from a time machine backup but did not import the Apps and System settings. I created a new account and moved my media and documents from my old account to the new account. I then deleted the old account. After all that I am still getting the read-only problem with Keychain. It now happens while I am using my laptop, not just when it wakes from sleep. As I mentioned before the issue is intermittent, about once or twice a week. The last occurrence happened a few minutes after I booted up. I have pasted the log below. I have taken it in to Apple and they ran a check-up and everything came back ok. I'm concerned because my apple care ends in about a week. Any advice you can give would be greatly appreciated. Thanks.
7/10/13 6:52:39.000 AM bootlog[0]: BOOT_TIME 1373464359 0
7/10/13 6:53:06.000 AM kernel[0]: Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
7/10/13 6:53:06.000 AM kernel[0]: vm_page_bootstrap: 1944529 free pages and 70703 wired pages
7/10/13 6:53:06.000 AM kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]
7/10/13 6:53:06.000 AM kernel[0]: zone leak detection enabled
7/10/13 6:53:06.000 AM kernel[0]: standard timeslicing quantum is 10000 us
7/10/13 6:53:06.000 AM kernel[0]: standard background quantum is 2500 us
7/10/13 6:53:06.000 AM kernel[0]: mig_table_max_displ = 74
7/10/13 6:53:06.000 AM kernel[0]: corecrypto kext started!
7/10/13 6:53:06.000 AM kernel[0]: Running kernel space in FIPS MODE
7/10/13 6:53:06.000 AM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
7/10/13 6:53:06.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Sandbox
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Quarantine
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
7/10/13 6:53:06.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
7/10/13 6:53:06.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
7/10/13 6:53:06.000 AM kernel[0]: MAC Framework successfully initialized
7/10/13 6:53:06.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
7/10/13 6:53:06.000 AM kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
7/10/13 6:53:06.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
7/10/13 6:53:06.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration begin ]
7/10/13 6:53:06.000 AM kernel[0]: console relocated to 0xf80010000
7/10/13 6:53:06.000 AM kernel[0]: PCI configuration changed (bridge=1 device=1 cardbus=0)
7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration end, bridges 5 devices 24 ]
7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 18:11:47 May 1 2013) initialization complete
7/10/13 6:53:06.000 AM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 78ca39fffe131078; max speed s800.
7/10/13 6:53:06.000 AM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
7/10/13 6:53:06.000 AM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
7/10/13 6:53:06.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
7/10/13 6:53:06.000 AM kernel[0]: rooting via boot-uuid from /chosen: F24E7B60-8654-3521-9DC6-9CA2F1979476
7/10/13 6:53:06.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
7/10/13 6:53:06.000 AM kernel[0]: BTCOEXIST off
7/10/13 6:53:06.000 AM kernel[0]: BRCM tunables:
7/10/13 6:53:06.000 AM kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[   32] reapcount[ 128]
7/10/13 6:53:06.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9750420AS Media/IOGUIDPartitionScheme/Untitled 1@2
7/10/13 6:53:06.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 2
7/10/13 6:53:06.000 AM kernel[0]: Kernel is LP64
7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
7/10/13 6:53:06.879 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
7/10/13 6:53:08.000 AM kernel[0]: BCM5701Enet: Ethernet address c4:2c:03:34:56:ec
7/10/13 6:53:08.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address f8:1e:df:ea:54:f5
7/10/13 6:53:08.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
7/10/13 6:53:08.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished():
7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe
7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0201
7/10/13 6:53:09.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
7/10/13 6:53:09.000 AM kernel[0]: Previous Shutdown Cause: 5
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
7/10/13 6:53:09.000 AM kernel[0]: NVDAStartup: Official
7/10/13 6:53:09.000 AM kernel[0]: NVDANV50HAL loaded and registered
7/10/13 6:53:09.519 AM com.apple.SecurityServer[15]: Session 100000 created
7/10/13 6:53:10.000 AM kernel[0]: DSMOS has arrived
7/10/13 6:53:11.454 AM airportd[27]: _processDLILEvent: en1 attached (down)
7/10/13 6:53:11.000 AM kernel[0]: createVirtIf(): ifRole = 1
7/10/13 6:53:11.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8017662400
7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
7/10/13 6:53:11.000 AM kernel[0]: Created virtif 0xffffff8017662400 p2p0
7/10/13 6:53:11.941 AM hidd[56]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
7/10/13 6:53:13.000 AM kernel[0]: macx_swapon SUCCESS
7/10/13 6:53:14.349 AM configd[18]: setting hostname to "Pluto.local"
7/10/13 6:53:14.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
7/10/13 6:53:14.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
7/10/13 6:53:14.354 AM configd[18]: network changed.
7/10/13 6:53:18.272 AM com.apple.SecurityServer[15]: Entering service
7/10/13 6:53:18.519 AM blued[65]: Read the UHE Info
7/10/13 6:53:18.519 AM blued[65]: Read version 2 info. Number of devices:2
7/10/13 6:53:18.519 AM blued[65]: Class of device:     0x2580
7/10/13 6:53:18.519 AM blued[65]: Device name: 'ervin's' length:8
7/10/13 6:53:18.519 AM blued[65]: Finished reading the HID data
7/10/13 6:53:18.519 AM blued[65]: Found a device with PID:0x030d VID:0x05ac
7/10/13 6:53:18.520 AM blued[65]: Class of device:     0x2540
7/10/13 6:53:18.520 AM blued[65]: Device name: 'ervinsiax’s Keyboard' length:23
7/10/13 6:53:18.520 AM blued[65]: Finished reading the HID data
7/10/13 6:53:18.521 AM blued[65]: Found a device with PID:0x0255 VID:0x05ac
7/10/13 6:53:18.987 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
7/10/13 6:53:18.993 AM loginwindow[51]: Login Window Application Started
7/10/13 6:53:20.506 AM awacsd[66]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
7/10/13 6:53:20.510 AM awacsd[66]: InnerStore CopyAllZones: no info in Dynamic Store
7/10/13 6:53:20.635 AM kdc[54]: label: default
7/10/13 6:53:20.635 AM kdc[54]: dbname: od:/Local/Default
7/10/13 6:53:20.635 AM kdc[54]: mkey_file: /var/db/krb5kdc/m-key
7/10/13 6:53:20.635 AM kdc[54]: acl_file: /var/db/krb5kdc/kadmind.acl
7/10/13 6:53:20.673 AM mDNSResponder[48]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
7/10/13 6:53:21.537 AM coreservicesd[70]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
7/10/13 6:53:21.539 AM mds[47]: (Normal) FMW: FMW 0 0
7/10/13 6:53:21.836 AM appleeventsd[62]: main: Starting up
7/10/13 6:53:21.865 AM com.apple.usbmuxd[36]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
7/10/13 6:53:23.268 AM aosnotifyd[85]: bootstrap_look_up failed (44e)
7/10/13 6:53:24.487 AM netbiosd[69]: Unable to start NetBIOS name service:
7/10/13 6:53:24.499 AM digest-service[87]: label: default
7/10/13 6:53:24.499 AM digest-service[87]: dbname: od:/Local/Default
7/10/13 6:53:24.499 AM digest-service[87]: mkey_file: /var/db/krb5kdc/m-key
7/10/13 6:53:24.499 AM digest-service[87]: acl_file: /var/db/krb5kdc/kadmind.acl
7/10/13 6:53:24.501 AM digest-service[87]: digest-request: uid=0
7/10/13 6:53:24.532 AM rpcsvchost[88]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
7/10/13 6:53:24.538 AM digest-service[87]: digest-request: init request
7/10/13 6:53:24.544 AM digest-service[87]: digest-request: init return domain: BUILTIN server: PLUTO
7/10/13 6:53:25.353 AM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
7/10/13 6:53:25.374 AM kdc[54]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
7/10/13 6:53:25.387 AM configd[18]: network changed: DNS*
7/10/13 6:53:25.393 AM mDNSResponder[48]: D2D_IPC: Loaded
7/10/13 6:53:25.393 AM mDNSResponder[48]: D2DInitialize succeeded
7/10/13 6:53:25.396 AM configd[18]: network changed: DNS*
7/10/13 6:53:25.398 AM mDNSResponder[48]: Adding registration domain 40041775.members.btmm.icloud.com.
7/10/13 6:53:25.671 AM kdc[54]: KDC started
7/10/13 6:53:26.235 AM WindowServer[71]: Server is starting up
7/10/13 6:53:26.652 AM locationd[52]: NOTICE,Location icon should now be in state 0
7/10/13 6:53:27.102 AM awacsd[66]: Configuring lazy AWACS client: 40041775.p03.members.btmm.icloud.com.
7/10/13 6:53:28.499 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.500 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.598 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.599 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.618 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 retained (2 references)
7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 released (1 references)
7/10/13 6:53:30.969 AM WindowServer[71]: Session 256 retained (2 references)
7/10/13 6:53:30.970 AM WindowServer[71]: init_page_flip: page flip mode is on
7/10/13 6:53:31.409 AM WindowServer[71]: mux_initialize: Couldn't find any matches
7/10/13 6:53:31.426 AM WindowServer[71]: GLCompositor enabled for tile size [256 x 256]
7/10/13 6:53:31.426 AM WindowServer[71]: CGXGLInitMipMap: mip map mode is on
7/10/13 6:53:33.627 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:34.283 AM WindowServer[71]: WSMachineUsesNewStyleMirroring: false
7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cc300000000042730c0
7/10/13 6:53:34.284 AM WindowServer[71]: Created shield window 0x5 for display 0x003f003d
7/10/13 6:53:34.288 AM WindowServer[71]: Created shield window 0x6 for display 0x042730c0
7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cc300000000042730c0
7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
7/10/13 6:53:35.073 AM WindowServer[71]: CGXPerformInitialDisplayConfiguration
7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x042730c0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cc3 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
7/10/13 6:53:36.423 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, accelerator 0x00003c8b, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
7/10/13 6:53:36.433 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
7/10/13 6:53:36.436 AM loginwindow[51]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:53:36.454 AM hidd[56]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
7/10/13 6:53:36.607 AM WindowServer[71]: Unable to open IOHIDSystem (e00002bd)
7/10/13 6:53:36.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
7/10/13 6:53:37.536 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:53:39.901 AM fseventsd[57]: Logging disabled completely for device:1: /Volumes/Recovery HD
7/10/13 6:53:43.565 AM WindowServer[71]: Created shield window 0x7 for display 0x042730c0
7/10/13 6:53:43.566 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.586 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.635 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:43.927 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.979 AM launchctl[124]: com.apple.findmymacmessenger: Already loaded
7/10/13 6:53:44.003 AM com.apple.SecurityServer[15]: Session 100004 created
7/10/13 6:53:44.146 AM hidd[56]: CGSShutdownServerConnections: Detaching application from window server
7/10/13 6:53:44.147 AM hidd[56]: CGSDisplayServerShutdown: Detaching display subsystem from window server
7/10/13 6:53:44.186 AM loginwindow[51]: Login Window Started Security Agent
7/10/13 6:53:44.361 AM SecurityAgent[133]: This is the first run
7/10/13 6:53:44.362 AM SecurityAgent[133]: MacBuddy was run = 0
7/10/13 6:53:44.367 AM coreaudiod[134]: Enabled automatic stack shots because audio IO is inactive
7/10/13 6:53:45.276 AM UserEventAgent[125]: cannot find useragent 1102
7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
7/10/13 6:53:50.000 AM kernel[0]: USBMSC Identifier (non-unique): 20080718000003 0x928 0xa 0x0
7/10/13 6:53:53.435 AM _netbios[143]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
7/10/13 6:53:53.790 AM _netbios[146]: Unable to resolve hostname(s)
7/10/13 6:53:53.808 AM ntpd[81]: proto: precision = 1.000 usec
7/10/13 6:54:02.217 AM SecurityAgent[133]: User info context values set for ervin
7/10/13 6:54:02.657 AM SecurityAgent[133]: Login Window login proceeding
7/10/13 6:54:03.085 AM loginwindow[51]: Login Window - Returned from Security Agent
7/10/13 6:54:03.132 AM loginwindow[51]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
7/10/13 6:54:03.148 AM loginwindow[51]: USER_PROCESS: 51 console
7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: UserName
7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: GroupName
7/10/13 6:54:03.330 AM com.apple.launchd.peruser.503[149]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
7/10/13 6:54:03.337 AM loginwindow[51]: Connection with distnoted server was invalidated
7/10/13 6:54:03.375 AM distnoted[153]: # distnote server agent absolute time: 85.254455240   civil time: Wed Jul 10 06:54:03 2013   pid: 153 uid: 503 root: no
7/10/13 6:54:03.640 AM awacsd[66]: KV HTTP 0
7/10/13 6:54:04.135 AM blued[65]: kBTXPCUpdateUserPreferences gConsoleUserUID = 503
7/10/13 6:54:04.868 AM com.apple.SecurityServer[15]: Session 100007 created
7/10/13 6:54:07.730 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:54:07.934 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:54:08.208 AM NetworkBrowserAgent[184]: Starting NetworkBrowserAgent
7/10/13 6:54:08.867 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
7/10/13 6:54:08.868 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
7/10/13 6:54:09.311 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:09.357 AM coreservicesd[70]: Can't change an application into stopped state for app App:"iTunes" [ 0x0/0xa00a] @ 0x0x7fe8b9e31660 because it's already been started.
7/10/13 6:54:09.521 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:09.000 AM kernel[0]: NTFS driver 3.10 [Flags: R/W].
7/10/13 6:54:09.000 AM kernel[0]: NTFS volume name , version 3.1.
7/10/13 6:54:09.000 AM kernel[0]: NTFS-fs warning (device /dev/disk1s1, pid 188): ntfs_system_inodes_get(): $LogFile is not clean. Will not be able to remount read-write. Mount in Windows.
7/10/13 6:54:12.043 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:16.235 AM WindowServer[71]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
7/10/13 6:54:16.249 AM WindowServer[71]: reenable_update_for_connection: UI updates were finally reenabled by application "Finder" after 1.01 seconds (server forcibly re-enabled them after 1.00 seconds)
7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
7/10/13 6:54:24.396 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Got error on refresh, but not rectifying principal because it was manually configured: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328d8100 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/10/13 6:54:24.426 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328da810 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=

Monitor Blanks in and Out When Waking From Sleep

Since getting my Mac Pro (with Apple installed RAM and NVIDIA GeForce 8800 GT), I've noticed that the screen does not immediately turn on when waking from sleep, as my older Macs did. Rather, it turns on for a split second, goes blank for two seconds, turns on again for a split second, goes off again for a second or more, and then comes on permanently.
This behavior only occurs when waking from sleep; it does not occur when the monitor turns on from the active screen saver.
Is this normal for the MAC Pro with an NVIDIA GeForce 8800 GT? I have a HP w2408h monitor with a DVI to HDMI cable. Everything else works fine, including all video behavior.
Thank you.

Hm. Bluetooth, interesting. Thanks for the idea.
I just opened the lid to see about the BT setting and the display didn't go off-on. The BT is off, I'm pretty sure I did that when setting it up as I don't use BT for anything.
I wasn't suspecting anything was seriously wrong, it's just that quick-on feature was highlighted as a selling point and I was curious about the glitch, if it was a setting I could change, for instance like you've highlighted. Annoying when things don't work as advertised.
And if I show the machine off to colleagues and friends, that will be a bad first impression they will want explained.

Wifi disconnects when waking from sleep mode; running Mountain Lion

Had this same issue with Lion as well,, wifi disconnects when waking from sleep mode,,,any ideas how to fix this pesky issue?

Hi Sky,
This has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

Trackpad Jerky or Unresponsive when waking from sleep

I've been having a problem with my trackpad being extremely jerky and unresponsive when it is waking up from sleep. I am a new mac user and I've only had my macbook pro since christmas and this problem is really getting annoying. Twice, I've had to just push the power button and press enter so my notebook would shut down and I could restart. Any Ideas?

First, when waking from sleep, MBP requires a little to get up to speed as it wakes if properly put to sleep. The MBP does hibernate and write to the hard disc when sleeping and this takes some time as does reading back. The book will be viewable immediately on waking but can seem laggard while fully getting up to speed from hibernation. Do not try to wake the computer until the little wake/sleep light has begun pulsing. Two, if you have a usb connection going or an expresscard inserted ... ensure that it lets the computer wake/sleep properly. Before sleeping the 'book, power off the connected items so that they do not interfere with the process.
What connections do you use? and what processes are going when you attempt to sleep the computer?
Use the Activity Monitor and the Console to check what is happening. Both the Console Log and the System Log in the console can provide you with info regarding your problems. Check the logs and post problematic entries here if you cannot interpret them yourself.
Message was edited by: Rhyd

Mac Pro Clicks Off When Waking from Sleep

Similar Messages

Maybe you are looking for