MAC PRO COLD BOOTS 5 SECONDS AFTER SHUTDOWN

HELP!
I've become very frustrated trying to fix this problem:
1.) I shut the computer down like normal (from the apple icon in the toolbar, select shutdown, click "okay" on the shutdown dialogue box), and it appears to shut down (i.e. I hear the "click" as the power shuts off).
2.) 5 seconds later (if I have not disconnected the power, or turned off the surge protector) it cold boots as if I pressed the power button.
3.) Putting the computer to sleep produces the same results.
I'm fine with killing the power after it shuts off with the power conditioner, but is that hurting the machine?
-gwb

djgardnsound wrote:
HELP!
I've become very frustrated trying to fix this problem:
3.) Putting the computer to sleep produces the same results.
Try a SMC reset which governs such things.
I'm fine with killing the power after it shuts off with the power conditioner, but is that hurting the machine?
Unplugging your Mac from it's power source causes the PRAM battery to discharge as it tries to maintain PRAM settings and the Macs clock. If you have done this before, or often cut power off to your Mac via a power strip or wall switch, your battery will deplete very quickly. You'll be replacing it often.
If you never cut off power to your Mac, they can last 3 to 5 years (mine lasted 7).
Dale

Similar Messages

  • MSI P67A-G45 Issue: Computer boots seconds after Shutdown or Sleep mode

    Current Build:
    MSI P67A-G45 (B3) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
    Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 3000 BX80623I52500K
    XFX HD-677X-ZNFC Radeon HD 6770 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card
    G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) Desktop Memory Model F3-14900CL9D-8GBXL
    Thermaltake TR2 RX 750W Bronze W0382RU ATX 12V v2.3 / EPS 12V v2.91 SLI Ready CrossFire Ready 80 PLUS BRONZE Certified Modular Active PFC Power Supply
    Seagate Barracuda ST500DM002 500GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive
    Running Windows 7 64 bit Professional
    Problem: Within days of building computer in January the computer started to automatically reboot seconds after shutdown or entering sleep mode.  
    Attempted Fixes:  
    -Total re-install of Windows + BIOS
    -Updated BIOS via LiveUpdate
    -Rolled back to initial BIOS that came with MB
    -Changed between registry option of "PowerdownAfterShutdown" between "0" and "1"
    -Disabled Wake-Up Events in BIOS
    -Changed to OS controlled Wake-Up events
    -Changed "Restore after AC Power Loss" to off in BIOS
    -Ordered a new PSU, replaced PSU
    Regardless the fix, if I try to shutdown - the computer reboots within a few seconds.  If I try to put it in sleep mode, it boots right back up.  The only way to get the computer to shut off is by manually turning off the PSU.
    I've seen that there have been frequent power-cycle issues with this particular motherboard in comments on newegg.com, just wondering if this issue has been encountered and if there is a fix available?

    Quote from: Bernhard on 17-February-12, 00:10:35
    Is this with no case wire connections to any of the headers? i.e. if you start it by shorting the on/off pin headers with a screwdriver tip.
    Yeah, as shown here.
    http://www.computer-how-to-guide.com/motherboard-troubleshooting/motherboard-post-test-how-to/
    Shorted on with flathead, boots up fine.  After flipping off the PSU to turn it off and then flipping the PSU back on, the dang thing waits a few seconds and boots right back up.  No short required.  At this point I think a ghost might be living in my computer.

  • 2006 Mac Pro Cold Boot Failure

    Hi all,
    I have problems with 2006 Mac Pro. It fails cold boot at 100%, first thing in the morning only. So I'm seeking expert advice.
    The spec is,
    Xeon 5355 2.66GHz x2 (Octo cores)
    ATI Radeon 5770(Apple Genuine)
    8GB Memory(4x1GB kingston, 4x1GB OWC)
    500GBx2 1TBx2 HDDs
    I disassembled and cleaned PSU and Fans, reapplying thermal pastes on CPUs and North Bridge a month ago.
    Then I booted, system froze at desktop, so I shut it down, reset PRAM & SMC. it booted normally but the upper riser card wasn't detected at all. I cleaned the slot contact and reseated DIMM modules. It was detected after that.
    Everything worked fine for a few days but then I got random kernel panics, reseated RAM, reinstalled Snow Leopard but still got random kernel panics. Then ran AHT for a couple of hours and got an error code 4MEM/6....
    I contacted OWC and they sent me a new set of memory modules. While waiting for the replacement, no kernel panics at all but DVD drive died as well as IDE cable, so I replaced both.
    I got the replacement RAM but past a week, MP fails cold boot every morning. Below is what's happening...
    (1) With Kingston Memory, CPU B error LED is lit, I press SYS_RST, one of DIMM LED is then lit (always DIMM A1). Or sometimes, Power-LED is blinking.
    (2) With OWC memory, boots normally, then kernel panic within a few minutes.
    (3) With OWC memory, CPU B error LED is lit, I press SYS_RST, one of DIMM LED is then lit (always DIMM B1)
    *(1) with new and old riser cards
    *(3) after replaced 2 riser cards
    Replacing riser cards didn't help. After these happen, I shut down by pressing power button for seconds and it boots normally without a hitch. Never get kernel panics nor system freeze. It means when it warms up, MP just works just like it should.
    Replaced so far,
    -- IDE cable (Apple Genuine)
    -- DVD drive (Optiarc AD-7200A)
    -- 4GB (1GBx4) OWC memory
    -- RTC battery CR2032
    -- 2 riser cards
    Is the logic board dead or PSU or memory modules are still bad?
    Any ideas?
    Thanks

    I have a Mac Pro dual 2.8 ghz quad core, circa 2008. Recently, I have been required to depress the power button to end a failed cold boot, then press again to boot, usually with success.
    Every hard restart freeze, and can guarantee you end up with
    corrupt caches, corrupt file system, corrupt directory.
    Safe Boot is not effective in such cases, fsck from single user mode has a better chance.
    Booting from another hard drive, install your bought copy of Alsoft Disk Warrior to rebuild the directory (it has deep scavenge files also).
    The longer you continue to do just Safe Boot and continue using it, the more trouble and less likelihood of being able to repair the drive.
    SMART is not smart enough, it tells you about the past, not what could likely happen, or if you have had bad sectors and I/O errors.
    Have bootable backup clones and a drive that is a clean Apple OS and drivers that isn't used except for repairs and maintenance. Don't rely on just Apple Disk Repair.

  • Mac Pro cold boot failure rate at 50%

    I have a Mac Pro dual 2.8 ghz quad core, circa 2008. Recently, I have been required to depress the power button to end a failed cold boot, then press again to boot, usually with success.
    I do hear a chime, but in the failed situation, it never progresses to the login screen.
    I've reset the pram a few times, this doesn't seem to fix anything, as the system always boots if you try enough times (knock on wood).
    I've verified the s.m.a.r.t. status and the disk, it all reports back as fine.
    I am writing this post from a "safe boot" hope to see if that works on the next cold boot.
    Other posts on this forum suggest it may be a weak pram battery so I will try that, the computer is getting on in years. However a similar post on this forum was marked as answered because the problem reported stated it did not chime from the external speakers. I don't care about that! So here's a new thread about documenting and hopefully solving the actual problem.

    I have a Mac Pro dual 2.8 ghz quad core, circa 2008. Recently, I have been required to depress the power button to end a failed cold boot, then press again to boot, usually with success.
    Every hard restart freeze, and can guarantee you end up with
    corrupt caches, corrupt file system, corrupt directory.
    Safe Boot is not effective in such cases, fsck from single user mode has a better chance.
    Booting from another hard drive, install your bought copy of Alsoft Disk Warrior to rebuild the directory (it has deep scavenge files also).
    The longer you continue to do just Safe Boot and continue using it, the more trouble and less likelihood of being able to repair the drive.
    SMART is not smart enough, it tells you about the past, not what could likely happen, or if you have had bad sectors and I/O errors.
    Have bootable backup clones and a drive that is a clean Apple OS and drivers that isn't used except for repairs and maintenance. Don't rely on just Apple Disk Repair.

  • Mac pro cannot boot after upgrade to 10.8.3

    My Mac Pro cannot boot after upgrade to 10.8.3. Anything firmware I can reset or how should I do.
    I am using a early 2008 Mac Pro

    Can you boot into safe mode? http://support.apple.com/kb/ht1455
    If not, how about Recovery? http://support.apple.com/kb/ht4718
    If you can, run Disk Utlity and repair the disk. You can try rebooting normally, but I would just reinstall after quitting Disk Utility.

  • Mac Pro will not restart after installation of Lion.  Help!

    Mac Pro will not restart after installation of Lion.  Help

    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • 2008 Mac Pro sees a second monitor that isn't there.

    My 2008 Mac Pro sees a second monitor that isn't there. It's the original ATI 2600 video card, and I'm running Mountain Lion. It says there is a VGA monitor plugged in to the second port, but there is no second monitor. If I connect the cable to the second port on the video card, I get no display at all. This seems like the video card to me, but it started happening after upgrading to Mountain Lion.

    My 2008 Mac Pro sees a second monitor that isn't there. It's the original ATI 2600 video card, and I'm running Mountain Lion. It says there is a VGA monitor plugged in to the second port, but there is no second monitor. If I connect the cable to the second port on the video card, I get no display at all. This seems like the video card to me, but it started happening after upgrading to Mountain Lion.

  • Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

    Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

    Try this:
    clone your system and repair it with Disk Warrior instead
    Or try a clean test system install on another drive
    A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
    Try to run w/o externals. MyBook included.
    Is that a 7200.11 1TB? they had a lot of issues.
    Run AHT off your OEM DVD.
    2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current.  Hopefully you have a UPS and is 1500VA unit.
    When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
    TimeMachine has its own bad habits, especially with Green drives and some externals.
    Try to rule out everything and then add back one at a time.
    And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old.  Might want ATI 5870 or 5770.

  • Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??

    Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??

    Some clarification may help.
    You say you cannot boot normally.  It shows a gray screen with the Apple logo.
    Did you say it will boot successfully in Safe Mode (boot, then hold down the Shift key)?
    How did you boot the machine to run Disk Utility?  (Which keyboard combinations)?

  • HT4818 Boot from laptop's Windows Hard Drive in Mac Pro via Boot Camp

    I have a work laptop that is on Windows 7.  It's a work hard drive so I don't want to mess with it (particularly as it's encrypted).  I basically want to use it on my Mac Pro rather than my piece of junk standard issue laptop when I'm working from home.
    What I would like to do is pull the drive out, put it in my Mac Pro and boot from it using Boot Camp.  Guidance I've seen so far talks about not being able to use an external drive but having to partition an internal drive.  However, if I've got everything on a separate drive (i.e. my laptop's drive), will this work?
    Thanks!

    Thanks for the quick (and no nonsense) response!

  • My Mac Pro loses network connection after wake from sleep since Yosemite upgrade.

    Mac Pro loses network connection after wake from sleep since Yosemite upgrade. Any one have this issue as well. And is there a work around?

    Wi-Fi?
    Wi-FI connection drops
    Wi-Fi Problems in OS X Yosemite
    Wi-Fi Problems in OS X Yosemite (2)
    Wireless Diagnostics
    Also try turning off Bluetooth.
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)

  • Mac Pro display remains black after start up.

    My 2008 Mac Pro display remains black after start up.  It is plugged in properly and the light comes on, but the screen stays black.  It first started doing this about a week ago, but after a manual restart or two, it would start up properly with the display working.  Today the display has remained black every time I've tried to start up.  Any suggestions for troubleshooting would be greatly appreciated! Thanks!  

    Safe Mode uses a very simple way of talking to the screen -- it does not even load the screen driver, and it uses a very common low resolution.
    If it does not work that way, it simply does not work. You need a replacement graphics card.
    User Tip: Mac Pro silver tower (2006-2012) Replacement Graphics cards

  • Mac Pro 2006 boots into OS fine but graphics freezes on grey apple logo

    When I boot my Mac Pro it boots into Mac OS X fine. I can access it remotely and all seems fine however the monitor only displays the grey apple with the whit background. I know the graphics card isnt over heating because I have removed any dirt/dust and had additional fans blowing the card and it is running cool.
    does this mean the graphics card is dead? if so what can i replace it with as the machine is now 5 years old?
    the current graphics card is a GeForce 8800 GT.

    That last one is not a good sign. Kernel panic when starting from an installer DVD either mean you are using an installer version that cannot boot your model or there's a hardware problem.
    I'm thinking your original thought may be valid. It would be provable if you had another GPU to try, but if you don't then I suppose you should replace the one you have. Of those available the ATI 5770 is an excellent replacement choice for both performance and cost unless you want to look for a different replacement card on eBay.

  • Mac pro won't restart after replacing backplane

    Mac pro won't restart after replacing backplane. I tried resetting PRAM, no luck. The grey screen with apple logo and spinning wheel shows up and the wheel continues to spin.

    What did you modify 'under the hood'?
    Mac OS X: Gray screen appears during startup - Support - Apple
    Read as MBP.
    Message was edited by: nbar

  • First G5 Quad says AppleSMU System Shutdown cause =3, now Mac Pro says -128 as a shutdown cause.

    A weird error I can't seem to troubleshoot easily through research has happened to my 2010 Mac Pro. Its called AppleSMU -- Shutdown cause = -128 = Does anyone have an idea what -128 it? I know what -1, -2, -3, -110(Power supply) all mean, but -128?
    To further troubleshoot the problem I rebooted in safe mode and everything seems to be working normally. My Mac Pro's temps are within operating range as well as the PSU. Can someone shed some light on what -128 means? Does anyone have a list of Apple shutdown codes with their meanings? I am going to attempt to run ASD and AHT tonight to see what the problem could be though.
    Thanks.
    Its like my G5 is running without problems, where as my Mac Pro(just by not using it for almost a week) is now giving me a shutdown cause of -128.

    Wow...  I found the problem, totally unexpected.
    It was a misbehaving UPS unit.  Not anything with the computer at all !!  
    It had never happened while I was around to see it before.  With the computer plugged directly into the wall, no more recurring rebooting.
    I think it's a worn out battery in my UPS.  Now, if I could only get all those computer diognostic hours of my life back. 

Maybe you are looking for

  • Using script to automatically arrange timeline and sceneline workspaces.

    This is a simple demonstration of using VB Script to adjust panels in PE3. In PE3, when you adjust the height of the timeline, the height of the sceneline is also adjusted the same amount, and vice versa. You could use script to automatically adjust

  • Please help with my sons ipod

    my sons ipod touch doesnt show up on my pc when i plug it into usb. it only shows a very low battery and occasionally the apple logo. it has been plugged in for 2 days

  • HT201320 I can only find one of the 2 email names on the ipad mail screen

    My wife and I both have Aol accounts.  we both can get aol mail on the Ipad.  The problem is only one of our user names shows up on the mail selection screen

  • Parameters missing LOVs

    Hi, I've an issue that seems to be isolated to Plus/Viewer. We've a new set of reports in our production environment that run perfectly when executed in Desktop. However, when attempting to run in either Plus or Viewer, some parameters are not retrie

  • Shield wizard

    what does this mean ? error reading setup initialization file ? This procedure was interrupted & wouldn't finish. Now what ?