Mac Pro Crashes Everytime Come back from Sleep Mode with Logic 8 Session on

Hi All,
I just got this new mac and have Logic Studio Setup on there along with VSL. I use Apogee Ensemble audio interface via firewire and have a Motif XS as my midi controller.
This morning I was in the middle of a session in Logic and then put the computer to sleep for an hour or so. I turned it back on and my 2nd monitor (right dual monitor) said I had to restart my computer. It was locked up. I restarted it and put it to sleep again after 20 minutes and came back 1.5 hours later and the same thing happened.
So, now I restarted it and it has not done it. Any ideas to what is the problem? Everytime i restart it says Mac OSX unexpectedly quit..
Please advise as this is a brand new computer and maybe I'm doing something wrong. Thanks.

I have an Ensemble also. Most likely, the issue is with the Ensemble firewire driver. It doesn't support sleep mode.
In any case, I would suggest shutting Logic down and also turning off the Ensemble if you're going to put the computer to sleep. I know that's a bit of a hassle, but it will solve your problem.

Similar Messages

Problem to come back from sleep mode in Lenovo Thinkpad T400 using Windows XP

Problem to come back from sleep mode in Lenovo Thinkpad T400 using Windows XP. Each time closing the T400 lid and try to make the laptop into a sleep mode for some time, it does not properly come out of sleep mode. Login screen is able to see when opening the lid for the first time, but it only seen for a while before then a black screen on T400 Thinkpad appears. Sometime the hard drive activity can be shown also. And then, to come back I had only one option to hard re-boot.
I tried Fn+F4 and power button once to come back but no use.
Please provide me some solution for this?
Thanks in Advance.

oh sorry and its been closed inbetween uses. When i open it the keyboard doesn't light up and it makes no sound.

TS1819 Mac OS X 10.7.4. How do I configure my network settings so I don't have to enter the password to my wireless router every time I start up or come back from sleep mode?

When I first got my MacBook Pro my wireless network at home (Linksys Wireless Router) popped right up and I entered the password and had no problems automatically connected after that. I went to a friends house this weekend who also has a wireless router named Linksys, obviously with a different password. Ever since I connected to her network I have to enter my network password at home everytime I start my computer up or wake it up from sleep mode.
My questions is what caused this to happen and how do I reconfigure my network settings so that I don't have to re-enter my password all the time?
Thanks

When I first got my MacBook Pro my wireless network at home (Linksys Wireless Router) popped right up and I entered the password and had no problems automatically connected after that. I went to a friends house this weekend who also has a wireless router named Linksys, obviously with a different password. Ever since I connected to her network I have to enter my network password at home everytime I start my computer up or wake it up from sleep mode.
My questions is what caused this to happen and how do I reconfigure my network settings so that I don't have to re-enter my password all the time?
Thanks

Satellite U400 wont turn on & when on wont come back from sleep mode

I have a Satellite U400 and its a year and a few months old.
In the last little bit it has been acting up, and it started with when the computer goes to sleep and goes to the black blank screen it will not come back from that.
The only way to do anything is hold in the power key till it turns off and then turning it back on. This brings me to the warning screen I have turned my computer off incorrectly. It has been doings this for a few weeks and started randomly out of the blue.
Then just today it wouldnt turn on at all, I was pressing the power key and the key itself would light up, and on the bottom right hand side the little lights would light up but wouldnt turn on, I kept pressing it over and over and over again and finally it did turn on. Once on I only used it for a few mins before turning off again and then would do the same thing, I kept pressing the bottom till it turned on. Its been on now and hasnt turned off again.
Not to log ago I had to reformat my computer due to me forgeting my password and had locked myself out of the computer. About a week after that is when the issues started. I am not all that computer smart, to be honest, I do understand something things, I can follow step by step to do something.
I really dont want to pay to have it fix I want to just do it myself and soon as its in great shape and never had any issues before.
Does anyone have any idea what this could be, or why it could be?
I am thinking about reformatting again as I am worried that didnt work out right the 1st time or something.
Or if this is something that needs to be repaired does anyone have a clue on the cost of it?
Thanks ^_^

hi aev270,
sounds like a serious problem to me.
try the following: take out battery, cd-rom, hdd and try again.
if it starts up without this components - you got lucky!
this means it probably a software issue (but i dont think so - sorry)
do you see the toshiba logo / bios messages? no - the you are in trouble.
this strange behaviour could depend on many things: defektive components like ram or grafics... or (badest thing) the mainboard...
if you have still warranty on it you should go to a servicepartner having the system checked.

Mac Pro will not wake up from sleep mode

Hi,
In my Energy Saver I have my system set to go to sleep after 15 minutes of not being used. Unfortuantely, when I try to wake the system up from sleep mode, it freezes on the screen saver and I have to hard restart the computer to get it to turn on again. I see that this is an issue with MacBook Pros, but I'm not seeing much in the Mac Pro Towers. I did see a thread about Parallels VM causing causing OSX to not wake up from hibernation mode, but I am not always running my VM Ware when the system decides to not wake up. Any help/advice is appreciated.
Thank you,
Julia
OS X Version 10.6.7
2x 2.93 GHz 6-Core Intel Xeon

.... and you fail to mention the model SSD and firmware version... or how you installed or cloned the system
most people also move most of their user folder to another hard drive.
sounds like a more normal Mail + OS issue if just that.
hard restarts = directory corruption so don't reboot w/o first either Recovery Mode, then follow up with Safe Boot.
And maybe you have 3rd party hardware or software that is not compatible with 10.8.2 needs to be considered as well.
2008 model 3,1 also are having a lot of issues this year. Including another critical piece, what gpu it has.

Re: powerbook wont come back from sleep mode

I have the same problem. PB G4, 1.5 GHz, bought in '04. When I put it to sleep by closing screen or manually it will not wake up. I have rest PRAM and PMU. Still nothing. Also, it was shut-down unexpectedly a few times and wouldn't restart unless I reset the PMU. I don't have anything but power cable plugged in (I think the cable and battery are ok). Any suggestions?

Hmm... very interesting. Mine has been doing this as well and just recently. I thought it might have to do with me using the PCMCIA slot. That was the newest thing I've done when I noticed that when it goes to sleep, I can't wake it up unless I force it to shut down (hold the power button down) and then restart again.
It may be something else. Like an Apple Software Update. That's my only deduction, but I don't know which one. Unfortunately, I don't log what and when I update. But I am one of those who updates frequently and doesn't wait to hear what others' experiences are before I let the update run.
It is annoying. Thankfully, not happening when I have left important work on in the background. I am going to shut off the "sleep mode" in energy saver so as not to risk losing work.
So I, like you, will wait to see what other people say.
Mine is a "new" PowerBook from eBay and it wasn't exhibiting those signs before. Just recently, like last week. (When I started using the cardbus slot with a USB 2.0 card, so I could have more slots available on the left side... yes, I know the PowerBook already comes with USB 2.0). Model A1106 at 1.5GHz.

Just upgraded to OSX mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

Just upgraded to OSX 10.9 mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

My Outlook prompts for password every time it comes back from sleep or started

I've Microsot Outlook for MAC 2011, version 14.4.1 installed on my MAC Book Pro Retina Display with OS X Version 10.9.2 and everytime my outlook comes back from sleep or is started or there is a little fluctuation in Wifi signals, prompts me for my email password. I checked the option of save my passord, deleted all previous passwords from Keychain but it doesn't works, so please help. My email at my official domain (not free domains) address is configured perfectly and my send and received is working fine.

I have that problem in Outlook, too. When I get the Yes/No dialog box, I simply click "No" and my machine continues to receive mail.
It's most certainly a pain, but coming out of sleep, your network doesn't kick in for a minute or two. I don't think that it's really a bug in either OS X or Outlook: it just takes that minute or so for the network to wake up.
Clinton

Newest 8-core Mac Pro won't always wake from sleep.

Recently I have been experiencing my Mac Pro not always waking up from sleep. It is a 2.4 Ghz 8-Core running Snow Leopard. I am using a USB keyboard and a Bluetooth mouse. I am noticing that it is becoming more frequent and it's starting to worry me with how expensive this computer is. If I had to guess, I would guess that it happens more often after long sleep durations. The only way to get it to turn on is by holding down the power to turn it off and then doing a reset. Any help is greatly appreciated.
Chad G

Hey Guys,
I was able to go a solid 19 days without having the issue occur. This is what came up today:
Interval Since Last Panic Report: 234328 sec
Panics Since Last Report:          1
Anonymous UUID:                    8AA886FB-EB63-4507-B919-EB3827C02A31
Thu Oct 20 09:07:20 2011
Machine-check capabilities (cpu 6) 0x0000000000001c09:
family: 6 model: 44 stepping: 2 microcode: 15
Intel(R) Xeon(R) CPU           E5620 @ 2.40GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000800 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000800 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0000000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0000000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0000000000000000 invalid
Package 0 logged:
IA32_MC8_STATUS(0x421): 0x0000000000000000 invalid
Package 1 logged:
IA32_MC8_STATUS(0x421): 0x0000000000000000 invalid
panic(cpu 6 caller 0xffffff80002d0238): Machine Check thread:0xffffff8023cc4620 at 0xffffff7f8086958a, registers:
CR0: 0x0000000080010033, CR2: 0x00000001028ad000, CR3: 0x0000000000c62000, CR4: 0x0000000000000660
RAX: 0x0000000000000020, RBX: 0xffffff80228ed800, RCX: 0x0000000000000001, RDX: 0xffffff7f8087b6e0
RSP: 0xffffff815296bbb0, RBP: 0xffffff815296bbf0, RSI: 0xffffff80228ed800, RDI: 0xffffff8022a1c700
R8: 0x0000000000000000, R9: 0x0000000000080000, R10: 0x0000000000000000, R11: 0x0000000000080000
R12: 0xffffff7f8087d490, R13: 0xffffff8022a1ebc0, R14: 0x0000000000000006, R15: 0xffffff7f80879d18
RFL: 0x0000000000000086, RIP: 0xffffff7f8086958a, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 6), Frame : Return Address
0xffffff814872eeb0 : 0xffffff8000204d15
0xffffff814872efb0 : 0xffffff80002d0238
0xffffff814872f0a0 : 0xffffff80002e48ff
0xffffff815296bbf0 : 0xffffff7f80861567
0xffffff815296bcd0 : 0xffffff7f808628a7
0xffffff815296bd70 : 0xffffff800022e409
0xffffff815296bd90 : 0xffffff80002083a4
0xffffff815296bdd0 : 0xffffff8000208fec
0xffffff815296be60 : 0xffffff8000209ab2
0xffffff815296bed0 : 0xffffff800020361b
0xffffff815296bef0 : 0xffffff800027426a
0xffffff815296bf60 : 0xffffff80002c3095
0xffffff815296bfa0 : 0xffffff80002e4894
      Kernel Extensions in backtrace (with dependencies):
         com.apple.driver.AppleIntelCPUPowerManagement(142.6.0)@0xffffff7f80860000->0xff ffff7f80883fff
BSD process name corresponding to current thread: coreservicesd
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 98603824370033
unloaded kexts:
com.motu.driver.FireWireAudio          1.5 41560 (addr 0xffffff7f80f98000, size 0x479232) - last unloaded 27915327085569
loaded kexts:
jp.co.roland.RDUSB012ADev          1.0.0
com.apple.filesystems.afpfs          9.7.1 - last loaded 26694620804799
com.apple.nke.asp_tcp          5.0
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AGPM          100.12.31
com.apple.driver.AppleHWSensor          1.9.3d0
com.apple.driver.AudioAUUC          1.57
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleMCCSControl          1.0.20
com.apple.driver.AppleMikeyHIDDriver          1.2.0
com.apple.kext.ATIFramebuffer          6.3.6
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMikeyDriver          2.0.5f14
com.apple.ATIRadeonX3000          6.3.6
com.apple.driver.Intel82574L          2.1.8b1
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleHDA          2.0.5f14
com.apple.driver.AppleBluetoothMultitouch          54.3
com.apple.driver.AirPortBrcm43224          428.42.4
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.driver.AppleLPC          1.5.1
com.apple.iokit.SCSITaskUserClient          2.6.8
com.apple.driver.AppleUSBHub          4.2.4
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleUSBUHCI          4.2.0
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.14
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.driver.DspFuncLib          2.0.5f14
com.apple.iokit.IONDRVSupport          2.2.1
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.IOBluetoothHIDDriver          2.4.5f3
com.apple.driver.AppleMultitouchDriver          207.11
com.apple.kext.ATI5000Controller          6.3.6
com.apple.kext.ATISupport          6.3.6
com.apple.driver.AppleUSBAudio          2.7.6f6
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.AppleHDAController          2.0.5f14
com.apple.iokit.IOGraphicsFamily          2.2.1
com.apple.iokit.IOHDAFamily          2.0.5f14
com.apple.iokit.IO80211Family          320.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.driver.AppleSMC          3.1.0d5
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleUSBHIDKeyboard          141.5
com.apple.driver.AppleHIDKeyboard          141.5
com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.driver.AppleUSBMergeNub          4.2.4
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IOAHCISerialATAPI          1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.TMSafetyNet          6
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacPro5,1, BootROM MP51.007F.B03, 8 processors, Quad-Core Intel Xeon, 2.4 GHz, 16 GB, SMC 1.39f11
Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
Network Service: AirPort, AirPort, en2
PCI Card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1
Serial ATA Device: HL-DT-ST DVD-RW GH61N
Serial ATA Device: WDC WD1001FALS-41Y6A0, 931.51 GB
Serial ATA Device: WDC WD1002FAEX-00Z3A0, 931.51 GB
USB Device: USB 2.0 Hub [MTT], 0x1a40 (TERMINUS TECHNOLOGY INC.), 0x0201, 0xfd100000 / 2
USB Device: UM-ONE, 0x0582 (Roland Corporation), 0x012a, 0xfd120000 / 5
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd110000 / 4
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfd112000 / 6
USB Device: Akai APC40, 0x09e8 (AKAI professional M.I. Corp.), 0x0073, 0xfd170000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x5a110000 / 3
FireWire Device: built-in_hub, Up to 800 Mb/sec
Can any Mac gurus specify what is going wrong?

After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

hello,
after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
The only "solution" is to restart my Mac.
- SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
My solution:
Cold start with Command-v pressed.
This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
Maybe Cmd-v set open firmware params and fixed some corruption.
Anyway: my mac mini works again.

Hey my air's screen is mess when it comes back from sleep. It is full of horizontal colorful lines. However, it becomes ok when I restart it. What's wrong with it?

Hey my air's screen is mess when it comes back from sleep. It is full of horizontal colorful lines. However, it becomes ok when I restart it. What's wrong with it?

Resetting PRAM may help.
Reset PRAM. http://support.apple.com/kb/PH4405

Satellite P200D-11R sound and graphics crash after waking up from sleep mode

Hi,
I am wondering if anyone here has had similar experiences to mine (below) or can offer any solutions.
I have upgraded my P200D-11R OS to Vista 64 Ultimate to take advantage of the extra performance. I also add that the BIOS has already been updated to version 1.4.
Well, everything works fine with the standard 2Gig of RAM which the laptop was supplied with originally, however, when I upgrade the RAM to 4Gig (2 x 2GB Samsung 667mHz modules), sound and graphics problems appear every time the machine is brought back from sleep mode.
The sound card makes a very laud fuzzy noise every time it wants to play a sound and the graphics produce lots of horizontal lines on the screen. I then just have to restart the machine which means loosing all my unsaved work.
Everything works fine as long as the machine does not enter sleep mode. I have currently disabled the sleep mode to prevent the machine from entering it but I am finding life very hard without it.
I am very surprised and also disappointed at the fact that Toshiba did not test these machines with Vista 64 Ultimate and 4Gig of RAM!
Extra info:
The memory is the same Samsung type as the 1Gig modules supplied by Toshiba originally with the machine, and the part number Toshiba recommends.
I have tried installing other (more recent) device drivers by Realtek and ATI without any improvements.
The memory modules pass all tests and are not defective. They have also been tested on my friends Dell notebook with no problems even in sleep mode.
I have installed my friends Dell 2Gig memory modules in my P200D and they too produce exactly the same results with post-sleep crashes.
My thoughts are that this must be another BIOS issue unless anyone can shed some light on the issue from another angle.
Please help! Many thanks in advance.

Hi Sascha
Since you are running a Vista 32bit version, the upper limit of the memory recocnised by the machine is 3.2gb which is the maximum a 32bit operating system can address and use. The diffrence here is that I also upgraded my OS to Vista Ultimate 64bit to get yet better performance out of the 64bit dual AMD processor.
3.2gb of RAM on 32bit OS does not necessarily increase the performance. However, it keeps the performance stable when you open many more programs at the same time since the machine has more RAM to play with before staring to use the much slower hard drive as operating memory (Page File), to keep all thoes open programs running.
A 64bit OS such as Vista Ultimate 64, recognises the whole 4gb of RAM and much more (for instance, 8gb with 2 x 4gb RAM modules). The 64bit OS itself would generally consume more RAM to start with, however, with 4gb I found the general performance to be much better. Going back to the problem however, my P200D-11R with Ultimate 64 and 4gb RAM refuses to wake up from sleep mode gracefully and the graphics and sound crash every time, forcing me to restart.
My feelings at present is that eventhough your machine may be slightly different, I bet if you upgrade your OS to 64bit, the machine will start recognising all of the 4gb of RAM and post-sleep crashes will start to appear!

Satellite P850-30W - Fan does not run after coming back from sleep mode

I got a Toshiba Satellite P850-30W with bios 1.90.
Sometimes the fan does not run at all after coming back from sleep mode on windows 7.
This has happened twice (maybe more times without me knowing), and Ive had the computers for a month.
Normally the fan starts running when the CPU gets over 50 celsius, and stops under 50 celisus...
I tried running Prime95 when this fan-issue occured and the computer temps got dangerously high (close to 100 degree)! the fan did not start at all
...this error could potentinally damage the laptop...
to get the fan running again I have to restart windows
anyone else experienced this?
I guess the fix would be to never use sleep-mode...or toshiba needs to fix it with a bios update.

What kind of answer do you expect here in user community?
Exact info about the fault? I dont think that somebody would be able to provide exact answer but just speculations
In other Forum you can read about Satellite notebook; but is it exacts the same model?
No, it seems to be an L650 series. Its completely different series .
From my opinion its not software related problem.
BIOS issue?
Well, in case it would be a BIOS issue, the problem would appear always and not sometimes after being shut down 200 times.
It could be a hardware related issue. Memory? Maybe
In my personal opinion to get more details hardware diagnostic software should be used in order check the hardware for possible malfunction. Thats my personal opinion

Why does my MAC sometimes crash when coming out of sleep mode?

My mac freezea sometimes when coming out of sleep mode, and occasionally the screen will go black. At other times I will be using the MAC and it will just freeze. The only way to get out of it is to kill power and reboot. It seems to be happening more frequently.
It was suggested that I fix permissions and start in sleep mode. This has helped in the past, and I am going to do it again now. I also recently upgraded to 10.6.8, and after that the crashes were fewer, but now they are increasing again.
I am including a log of the recent crash a few minutes ago.
12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:04 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:04 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:15 AM com.apple.launchd.peruser.501[94] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
12/23/11 11:41:23 AM com.apple.launchd.peruser.501[94] (com.apple.Kerberos.renew.plist[116]) Exited with exit code: 1
12/23/11 11:41:34 AM com.apple.WindowServer[71] Fri Dec 23 11:41:34 Macintosh.local WindowServer[71] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory

Okay thanks, but I am a newbie who is not a very tech kind of a person. The only periphals I have are a kodak camera dock, a Canon 310 copier/fax/scanner and a pair of altec speakers. How do I determine if they all have drivers for my MAC? They all seem to work okay, if that is a sign, though the Kodak camera Dock is a bit slow. How also do I determine if they are Apple energy compatible? With each of these peripherals, do I simply disconnect them from my MAC one at a time to see if there improvement?

MacBook pro 17" will not wake from sleep mode

Ok so my MacBook Pro 17" with osx 10.6.8 will not awaken from sleep mode. when attempting to wake it up the screen dosent come on and the mouse and keyboard do not receve any power. to get back on the computer i have to force a hard restart by holding the power button for 10 seconds then pressing it again. then it boots to where i left off when i closed the lid. i have read a few forums about this problem and i have went through all the steps of reseting various things and went as far as going into terminal using sudo to disable safe sleep and nothing helps. i noticed an unusual error in my console. here is a copy of my console log. the one in question is {7/14/13 4:52:43 AM com.apple.UserEventAgent-Aqua[118] dontAutoLoad = EMPTY!} someone please help me I am over 150 miles from the nearest apple store or authorised retailer

Active Profiles:
Battery Power                    -1*
AC Power                    -1
Currently in use:
halfdim          1
sms                    1
hibernatefile          /var/vm/sleepimage
gpuswitch          2
disksleep          10
sleep                    0 (imposed by 223)
hibernatemode          3
ttyskeepawake          1
displaysleep          5
acwake                    0
lidwake          1
Also I broke down and called support again this time a senior advisor's boss recorded the events and sent the data to their "engineering department" still waiting on the results hopefully they will get back to me sometime between today and saturday. will post the results of the tests. also this is a 2011 17in intel i5

Mac Pro Crashes Everytime Come back from Sleep Mode with Logic 8 Session on

Similar Messages

Maybe you are looking for