Mac Pro, Creative Suites and extra hard drive query

I am seriously looking at purchasing a 15" Mac Pro this year - I know what specs I want, but I am curious as to what Mac users do re the extra hard drives? I am used to having a second hard drive on my PC for scratch discs for the Creative Suites including CS4. What do Mac users use for extra scratch discs? Do you use a removable drive? Apple tells me that I can't have any second hard drive in the Mac Pro or iMac, hence my query. (I will also be attaching my Wacom Cintiq 21UX to it as well.) Thank you.

Thank you Steve - however I use the scratch disc in both Illustrator and Photoshop and Premiere, hence it becomes a more general question.
In moving to a Mac I am trying to understand whether the drives work differently, or can you partition the main drive on a Mac and use those partitions for scratch discs?

Similar Messages

  • I have a mac pro 1.1. the main hard drive failed. How do I reload OS X 10.7 back in my computer. the app store will not let me reinstall this os. My computer is not compatible OS x 10.8?

    I have a mac pro 1.1. the main hard drive failed. How do I reload OS X 10.7 back in my computer. the app store will not let me reinstall this os. My computer is not compatible OS x 10.8?

    You need to first install the OS your Mac came on the bundled gray disks. Assuming it's Snow Leopard, you could then login into the App Store using your same Apple ID and password to download and install Lion.
    If your Mac is a bit older and came with Leopard, 10.5.x, you can bypass that and install Snow Leopard from your retail disk. The only software you'd need to install separately from the gray disks would be the optional software, such as the iLife suite and other titles not included on the retail SL disk.

  • My Mac Pro only has a 250GB hard drive. can I use my 1TB hard drive from my windows computer, they're bith SATA

    my Mac Pro only has a 250GB hard drive. can I use my 1TB hard drive from my windows computer, they're bith SATA

    You want system, data, backup etc. Make good use of the four internal drive bays.
    You will have to use Disk Utility to ERASE or click on drive and use PARTITION to make it Mac writeable.

  • Backed up Adobe Creative Suite on external hard drive, how do I get it back onto my Mac?

    My Mac is four years old and the hard drive crapped out. I backed up my entire computer before getting a new hard drive, this includes my Adobe Creative Suite which is very important as I am a designer. I need help figuring out how to get this all back onto my Mac so I can get back to work!
    Any help will be very much appreciated!

    Which Creative suite version you want to install and do you have the Serial Number for that and what is the Operating System ?

  • Mac Pro RAID Card and Western Digital drives

    I'm having huge troubles with these items.
    I first installed four WD7500AYYS (Raid Edition) to build a RAID 5 and install Leopard on it. At this point, one of the drives was probably DOA and didn't show up in the bay. I then reinstalled the Seagate that shipped with the machine, then proceeded to create another enhanced JBOD raid with one of the WD drives. After a couple of seconds, RAID utility reported an error (disk about to fail and such). I then tried with another one. The process ended with a kernel panic after two hours, while RAID utility was still marking the drive for enhanced JBOD. That disk never show up again, in any bay.
    At this point, I'm left with two WD drives. I can't get past the creation of a RAID set with them, no matter what. Either RAID utility reports an error, or it says the disk has been ejected, or it keeps create the RAID for hours... The later usually ends with a "force quit", or a force shutdown. During these attemps, the RAID card went missing once, then it appeared again on the following reboot. The RAID battery, which was fully charged at first, is now being "repaired" (charging ?).
    I then ran AHT to see whether there was something wrong. No errors reported.
    Because all four drives were Raid Edition, I thought this could be the root of the problems. So I bought a Caviar SE16 (WD5000AAKS). To no avail. It fails too, in the very same way. And now it no longer appears in any bay.
    The last step I took was to remove the RAID card (connecting the iPass connector to the motherboard). Out of the five WD drives, only two RE2 (the two that still show up with the RAID card) do appear in disk utility. But disk utility never ends "writing the partition map" or "preparing for initialization".
    By now, I end up with five WD drives that appear to be just dead, as if they were killed by the RAID card trying to RAID them. The only drive that works, with or without the RAID card, in any bay, is the Seagate. I didn't try to fiddle with it though (I'm reluctant to format it just to see whether I can create an enhanced JBOD raid with it).
    So the question is, are Western Digital drives compatible with this RAID card ? If they do, then how a RAID card can kill them in such a way while keeping the Seagate alive ?
    I'm lost in conjectures. I don't even know if/how I can bring all the WD drives back to life. I'm not sure the RAID card is faulty, I've already lost a lot of time and money, I'm not willing to buy yet another drive to see it fail too, and my Mac Pro is kind of useless as I don't want to spend time on installing/configuring everything I need on a drive that is bound to be replaced by a larger RAID 5 array.
    Any help is appreciated. Thank you.

    Someone yesterday or Friday, had a system with 4 x 1TB drives and Pro RAID, but in their case, it was determined later Saturday that drive bay #1 was not functioning.
    Hopefully these fully retail drives, not OEMs, and I would think they are fine. They are what I would use (Sonnet Tempo only supports RE of the WD drives). Someone else, Danish?, had 3 out of 4 WD drives were DOA.
    I've never had trouble buying over a dozen from OWC, so it does seem odd.
    If you have SoftRAID 3.6.6 I would use that to zero the first and last 100 sectors, or you can begin to zero the whole drive and cancel at any time, just to check the health of the drive and that it can zero and not produce I/O errors.
    There are two other methods for accessing and managing Mac Pro RAID, ARD and CLI
    http://docs.info.apple.com/article.html?artnum=306231
    Originally, only Apple drives were supported. My understanding was that this changed. But the only article I found in KB dates back to Aug '07:
    Question: What drives does Apple support with the Mac Pro RAID Card and the Xserve RAID Card?
    Answer: +Only Apple drives are supported with the Mac Pro RAID Card and the Xserve RAID Card.+
    My understanding that 3rd party retail drives such as WD RE2 750GB, Seagate, Hitachi were supported as well since the article was written - and I can't find where I read that, but sure that I did, as this was discussed in the past.
    I'd like to find an official article. Even my friend Google was helpless

  • Mac Pro 3,1 - did my hard drive die? And what should I replace it with?

    Hi,
    I inherited my late husband's 2008 Mac Pro (3,1 model) which had 2 x 500GB hard drives in it and 6GB of RAM. I filled the remaining hard drive bays with 1TB drives (I take a lot of video so needed the extra space). The boot drive was partitioned 50/50 in Boot Camp. I've upgraded the RAM to 10GB and I am currently running Lion.
    Today, while doing something as innocuous as scrolling down a web page, the bottom half of my screen went black and the top half began flashing wildly. When it  stopped after several seconds, the mouse would not respond and I could not click on anything. If flashed a bit more, and then I had mouse control back but could not click on anything - web links, applications, finder. After waiting patiently but getting nowhere, I powered the machine down manually, and when I re-started it, it failed to boot. The chime sounded, the apple appeared, and the little revolving wheel, but at the point where the screen would normally go blue then display the desktop, it just went white. The fans spin, but otherwise it's very silent.
    I tested with a second display, got the same issue. I tried booting to recovery mode but it went back to the white screen. I could start in target mode, and there were no issues with flickering screen, so I don't think it's the graphics card. Then I tried browsing to the hard drive over the network, but it wasn't showing on the PC network page, nor could I connect to it via the home theater system, which I can normally do as the streaming app launches on start-up. I am assuming this means the drive has failed? It's the original, and we bought the machine when they were new to the market, so is a good 5 years old. It contains not only the boot drive but my documents, photos, websites, selected videos, all of which are backed up on the Time Capsule, and I was in the process of uploading to cloud backup as well (although not very far along, due to data cap and slow international upload speeds). I had no warning it was about to do this, but then I guess sometimes you don't!
    Assuming I need to replace the drive, would it be worth replacing it with an OWC Mercury Electra 480GB SSD in an Icy Dock sled? Or would that be overkill for such an old machine? Would getting a standard 7200 WD Caviar HDD or similar give me enough of a speed boost? Obviously I am rather enamoured with the idea of a blazing fast SSD but I'd have to import it (not available locally) so I don't want to shell out all that money unless it's really going to make a massive difference.
    Is there anything else I would need to know about using an SSD over a HDD? I assume I would fire it up the normal way - install it, boot from my Snow Leopard install disc (I downloaded Lion from the App Store) format it, clean install SL, then re-update to Lion, then restore my Time Machine backup? Am I likely to experience any weird issues due to it being an SSD? I see talk online of firmware problems and something called TRIM that I don't know anything about. If it's most likely that I can install it and rock on as normal, then I'm pretty keen, but if there's a reasonable probability of it being temperamental, I probably wouldn't be willing to deal with that (and therefore go the HDD route instead). Therefore I am very keen to hear people's opinions and experiences.
    Sorry for the terribly long ramble. The more I have researched this, the more questions it raises! All advice gratefully accepted. Thanks!

    more than likely it is your video card. If it is ATI 2600XT, tell it bye-bye. The card is barely used at all in TDM or Safe Boot Mode. The 2600 and Lion and the issues with that card, even if it seems okay, is not.
    Depending on Windows OS as to how it mounts and sees your Lion HFSX (there is a nice HFSX driver from Paragon, and an NTFS driver for Lion too)
    480GB SSD is overkill for any system unless you are pushing CS6 2-3GB images and then for scratch. All you need for a boot drive is about 100GB.
    If you have an SSD now, then 1) you need to do a full image backup and restore (regularly as maintenance), and 2) TRIM Enabler
    Save Lion and you can always do a clean Lion install w/o going back to SL - but you might want to keep SL (dual boot) and handy if you run into anything you still need that required PowerPC/Rosetta
    FBDIMM RAM dies, Amazon has $32 kits of 4GB. And having all 8 DIMM slots filled improves things. If you need or want to and feel 16GB isn't overkill.
    SSD and issues are always possible. you should not just go along. not without a clone image. And you should have another drive w/ TRIM Enabler so that you can do a repair and "trim" what is needed.
    Clone a system with CCC regularly. Bootable. And can also be used by Setup Assistant.
    Install Lion over a heavily used SL system and there are likely remnants of old things that get in the way and left in there and not removed.

  • Mac Pro 2008 Not Recognizing SATA Hard Drives After Power Failure...

    So we recently had a weird power "outage" where the power still seemed to be surging some (my monitor was blinking wouldn't turn completely off until I yanked the plug on it), and to my dismay, when the power came back on, I started having boot issues with my Mac. Luckily I had a couple of identical dual-quad core machines sitting around (workgroup environment), swapped my hard drive into one of them, and was back in business on-the-fly.
    However, I'm now trying to troubleshoot the faulty machine (qihout throwing parts at it yet) and am stuck at an impasse. With the hard drive of the secondary machine cross-installed into the one that got "hit" by the outage, I simply got the chime and then it stuck on the dreaded gray screen, and out of all the boot options, the only one that would get me a different result was to try to option-boot into the Startup Manager, which would still give me the gray screen but also a mouse cursor after about a minute. Zapped PRAM... reset SMU... even swapped CMOS battery... all to no avail.
    So I started yanking things. Memory.. video card... and finally the one and only (swapped) hard drive. The last one did it, and I was finally able to option-boot, start up from the Installation CD, and ultimately, D-boot into the hardware tests on the CD. Ran both normal and extended tests and everything checked out fine, with no errors (and based on the potetnial error messgaes I read about, these tests check everything from the logic board to the power supply, and voltage across both).
    Now I'm torn and not sure which route to go from here. Machine seems to operate relatively normally when booting from CD... all hardware tests pass... Super Drive works (not sure it that's SATA or PATA, but guessing the latter at this point)... it just won't take a hard drive (which I verified is fine in another computer), regardless of which of the 4 bays I put it in. I'm also hard presed to believe that the power outage/surges caused the SATA cable(s) to go bad yet nothing else, which still have me leaning towards SATA controller on the board or a power supply issue despite the fact the tests passed.
    Thoughts, opinions, or comments... from experience or otherwise? Thanks in advance!

    Look hatter. I'm not saying it doesn't, but "prevention" is not why I started the thread. It was to troubleshoot the already existing problem, and you suggesting I run out and drop a combined $1000 on UPS units for each of the five 2008 Mac Pros I still have in my department is neither contributory to the thread topic nor cost-effective just to (possibly) prevent another (what seems to now be) $10 cable issue yet another 6 years down the road. Thanks, though. :/
    Well it wasn't the power supply, nor apparently the SATA controller (I don't believe at this point). I finally got the hard drive to recognize and boot again, but ended up having to use one of the two extra SATA connector ports on the board (which I can only assume are handled by the onboard SATA controller as well) and a 4-pin molex to SATA power adapter connected to the power output for the secondary optical drive. As such, It very well may just be the "Hard Drive Harness Cable", although I need to order a male to female SATA extension cable so I can hook the drive up directly to the data side of that the drive bay connectors to determine whether it's the data side or the power side causing issues. I'm again assuming power, since the extra SATA ports seem to work, I'm pretty sure the drive isn't spinning up fully, yet the bays obviously 'recognize' there's a drive in there (thus the gray screen when one is plugged in).
    Anyway - I'll update when I get to that point, primarily for posterity's sake, as I found several "unresolved" gray screen threads on the web (and even in these forums) that sounded just like mine yet offered little ultimate help. In the meantime, does anyone want to speculate on whether it's the cable itself or maybe the SATA chain power plug on the board could be bad? It looks to be pretty close to the main power input connector on the board, so just wondering if (worst case scenario) something could have popped on the board between the two? Seems unlikely, but...
    Either way, I can always work around it all if necessary by utilizing the same setup I got it to boot with.

  • I can't get my Mac Pro to recognize my external hard drive

    I recently purcchased a Mac Pro. I have a 15" PowerBook G4 that I still use. About a year a go I purchased a Lacie 500 GB external hard drive and formated it on my PowerBook and transfered about 350 GB of data over a period of time. I know am trying to access the Lacie on Mac Pro and the disk will not mount. I know that you have to format external drives differenly for Intel Macs but is there a way for me to access my data on my Lacie?
    Please help! I need these files.
    Mac Pro   Mac OS X (10.4.9)   Dual Core 3.0 Ghz, 4 GB memory

    Intel Macs use a different partition table format (GUID) for booting. Otherwise, the PPC/APL tables should still let it mount etc unless there is a problem with LaCie or the FireWire ports.
    Does it have FW800/400 and USB2?
    Seems like LaCie isn't using the best cases or firmware or bridge.
    This is a D2 model? two drives bridged to appear as one volume?

  • Mac to PC Files and External Hard Drives?

    o.k. First want to thank all those for helping here!
    I have been reading and researching for all the answers but I am still confused???
    I am going to give you all the information possible to allow someone to offer the best solution.
    I have a 6 year old Dell running windows ME PIII866 with 128MB with some pictures and word, powerpoint that I want to save before I give it to my children.
    I have an HP Desktop XP AMD Athlon 64 X2 Dual Core Processor 4200 about one year old that I am selling to purchase our first MAC. This computer has about 80GB worth of video and pictures and documents.
    My wife has a Compaq laptop about 18 months old she uses for work running XP.
    I purchased a Western Digital External Hard Drive to back-up and save all the data.
    The problem is I am not sure what format to use.
    I have only 3 files larger thab 4Gb to save. So I could use FAT32 and just burn those to DVD.
    What is the best solution???
    Should I look at a program like Macdrive and that way any future file size problems are not an issue? Seems crazy when only 3 files require that program. Anyone using Macdrive as an option?
    I would like to get into making home movies on our Mac. Not sure about future file size extra.
    I guess what format should I make the External Drive?
    Thanks so much for all your help
    It is great to be in the Mac World!!!
    Tig
    P.S. Sorry for all the info but I thought giving some back ground would help those have the answers!

    Quick follow up information. My new macbook has not arrived yet. I am trying to save time and get ready by dumping the informaiton/files from the old desktop.
    The desktop is sold and needs to move onto greener pastures
    I just don't want mess anything up here most the files are video...like my children's births, first Christmas, first birthday. Nothing too important
    Thanks again for your help and thoughts.
    Tig

  • How do I reinstall Creative Suite due to hard drive failure?

    My hard drive failed and I do not have access to it. I need to reinstall my creative suite. How do I do so?

    download the installation files and install.
    if you see an excess activation count issue when installing, contact adobe support for an activation count reset by clicking https://helpx.adobe.com/contact.html >'still need help'.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • Mac Pro 2007 No Power to Hard Drives

    While changing hard drives in my Mac Pro 2007 (model 2,1) today, I apparently shorted something out and there is no longer power being provided to any of the hard drives or the super drive. On first boot attempt, the fans went into over drive and I smelled something burning, so I quickly turned it off and reinstalled the original drive.
    I am able to boot up off a Yosemite installer USB flash drive and run Disk Utility - confirmed that none of the disks are visible. Everything else on the computer seems to be running fine. 
    Does this sound like a power supply issue or I have a fried something on the main logic board?
    Any help is greatly appreciated!
    Ryan

    Disk drive connector (AMP MATE-N-LOK 1-480424-0 Power Connector)
    AMP MATE-N-LOK 1-480424-0 Power connector (female pins)
    Type
    Electrical power connector
    Production history
    Manufacturer
    AMP
    Produced
    1963
    General specifications
    Width
    21 mm (female), 23 mm (male)
    Height
    6 mm (female), 8 mm (male)
    Pins
    4
    Electrical
    Signal
    Yes
    Max. voltage
    12 V
    Max. current
    11 A/pin (30 °C rise)
    Pin out
    Male Pins (Female Connector)
    Pin
    Color
    Type
    Pin 1
    Yellow
    +12 V
    Pin 2
    Black
    Ground
    Pin 3
    Black
    Ground
    Pin 4
    Red
    +5 V
    18 AWG wire is typically used.
    The desktop computer hard-drive connector is pictured here. It has 4 conductors, with the standard pinout as follows:
    Pin #
    Color
    Function
    1
    Yellow
    +12 V
    2
    Black
    Ground
    3
    Black
    Ground
    4
    Red
    +5 V
    SOURCE:
    images and text from wikipedia.org

  • Mac Pro Slower after adding second hard drive

    My work computer is a Mac Pro 3,1 running Lion 10.7.3 with 4GB RAM and a 1TB hard drive. It was performing well running programs like Adobe CS5 and Final Cut Pro until I added a second 1TB drive (Western Digital WD1001FALS). After that upgrade Photoshop is way slower while programs like InDesign and Final Cut are noticable slower.
    Is there any reason for this?  Anything that can be done outside of a memory upgrade?

    Let me try to direct you to some tips on CS5, and suggest that more hard drives properly used (OS, scratch, data, backup, array) can help, but that one drive and 4GB RAM is under performing.
    Optimize Photoshop CS5
    Optimizing Photoshop Overview
    Adobe Photoshop FAQ
    Optimize performance Photoshop
    What are you using the WD1001FALS for? data? scratch?
    And open Activity Monitor and check pageouts. Unless your use if very very light, I can't see that as being enough for even CS5 code and some OS X let alone any more apps.
    Activity Monitor memory usage

  • Will G3 Mac pro recognize large firewire 400 hard drive

    I have an older G4 Mac Pro and I'm wondering if I can connect/use a larger hard drive via firewire 400. I understand there is a limitation on the size of drive attached internal, but does the same limit apply to firewire attached drives?

    Wow Kappy, thanks for the rapid reply & Yes, you are correct, my mistake, it is indeed a PowerPC.
    So I could attach a 2TB drive and use this machine as an iTunes server?

  • Mac Pro - adding a second 750GB Hard Drive - Best Configuration

    I just purchased 2 Mac Pros. For the second one, I plan to use it as a server - thus I'll refer to it as "Mac Pro Server". On this Mac Pro Server, it came with the 250GB hard drive and I purchased a second 750GB hard drive. I plan to backup this total of 1TB to an external 1TB hard drive. I have two of these so I can take one home each week.
    I've installed the second 750GB hard drive but I'm not sure the best way to set it up in Disk Utility. Should I keep it a second drive or should I combine it with the 250 to make it a full 1TB? I'll be connecting to the Mac Pro Server server from 3 other Macs in the office mostly moving Photoshop, Illustrator and InDesign files.
    What would you suggest?
    Thank you!!
    Zack

    Hi,
    Just for safety's sake I would leave the drives seperate, if you use RAID to stripe the drives together, and one subsequently fails you may loose everything.
    With the 750GB used for the 'serving' aspects, and regularly backed up you should be safer.
    Just make sure you have a safe, backed-up startable volume if downtime would be an issue in case of failure of the 750.
    A

  • Using Mac Mini, Time Machine and External Hard Drives as a Backup Server

    Hello...
    I own a graphic design studio and have been looking for a long time to create/buy a no-thinker backup system for my macs. I have 4 workstations that I would like to backup to one central "server".
    So what I was thinking was buying a Mac Mini, 3-4 external USB 2.0 Hard drives, external Blu-Ray burner and upgrade all our systems to OS 10.5. What I need to know is, will each work station with Time Machine on it back up across the network to a specific drive on the Mac Mini? If I have each workstation automatically mount one external across the network onto the desktop, will Time Machine recognize that hard drive as a legitimate drive to backup to?
    Having the external Blu-Ray disc burner will give me the ability to burn data to a disc so I will have a way to take some of my information off-site. Since we are a graphic design studio, we use large amounts of disc space and regular DVD-R (4.6 gigs) is just not enough to back up some projects.
    Can someone enlighten me, and tell me if this would work or not. It's the only way I can see me creating something that has enough space, will back up automatically across the network and allow me to make off-site copies of my data without spending $5,000.00.
    Thanks for any comments you might have on this topic.
    -SoupGFX

    I'm a member of a freelance graphic artist team and have been scraping by with my MacMini and CS3. I recently obtained a used iMac (approx. 2 years old) and, instead of painstakingly transferring everything left on the Mini to the iMac, I wanted to know if it's possible to turn the MacMini into a pseudo external hard drive using the FW800 port.
    I already had an external attached to the Mini and plan on using that as well, but I tend to hoarde information and run out of space really quickly. So keeping the mini around, preferably in a way that I can access it as an external through my iMac, would be perfect. I have very little experience with networking and don't have a wireless connection (yay modem cables!) so I don't quite know how to figure this out.
    Has anyone done this? Would a FireWire 800 work? Would I need to set up a network between the two and use them as independently connected computers?

Maybe you are looking for