Mac pro does not restart

Mac Pro on OS X 10.7 does not restart. Grey screen, no apple, nothing happens.

cmd-r brought it to life, than restarted and it was ok.
Tnx for helping out.
If you could tell me why this network screen doesn't give wifi or airport options, i'd really be grateful.
Newly installed Lion, router is fine.

Similar Messages

Mac pro will not restart.

When I try to update software my mac pro will not restart. So the software does not update. What to do? I have tried unpluging all external drives. No luck. The screen just stays in the infinity picture. I have tried waiting 5 minutes. Still no restart.

You are still using 10.6.8, just to confirm, so you don't have Recovery Mode for one thing. But do you have a backup that is bootable? make one now before you do more. And try repairing the drive as well as doing a Safe Boot.
You may need to do a clean install to another drive. Apparently you have another Mac or something to post and get online so you could also use Target Disk Mode to access the system in trouble.
Update with what from what? what other internal drives are there?
Clone
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://www.bombich.com/
Create an OS X Lion Install disc
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/
General Mac maintenance: Tips to keep your Mac in top form
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary account to isolate user-specific problems: Isolating an issue by using another user account
To resolve startup issues and perform disk maintenance, use Disk Utility.
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode

Mac Pro will not restart after installation of Lion. Help!

Mac Pro will not restart after installation of Lion. Help

Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Mac Pro does not auto-sleep (manual sleeping if fine!)

I have a small annoyance with my 2009 (Nehalem) Mac Pro I am wondering if someone can help with, or suggest something, please:
The Mac Pro does not auto-sleep; ever. I have played around with the sleep time settings, and enabled or disabled the 'sleep drives' option, but to no avail. Mac Pro will stay on, no matter if I am logged on OR even on the 'log on users' screen.
That said, I can sleep the Mac Pro manually at any time, and without any problems; it stays asleep without a hitch, and wake-up is flawless.
There is nothing in the console log that would tell me why the auto sleep doesn't function. I deleted the sleep plist and re-set, but again, no change.
Any ideas? Not sure what could signal the system to not do auto-sleep?
It's running 10.6.3.
Cheers,
Dan

Exactly the same problems as those described above: forced sleep works (by using the power button or closing the lid) but automatic sleep doesn't (using 'Energy Saving' preferences).
Tried every single piece of advice here and on other posts: reset PRAM/ SMC, verified disc, repaired permissions, deleted the power saving preference files, cleared caches & history, restarted in every conceivable mode... The only things that worked were safe boot and creating a new user account which means it must be a software issue.
Disabled/ removed/ paused/ reinstalled every piece of software I could but to no avail. The most frustrating thing? Having to wait for 5 mins every time I tried something to check whether the damned thing was going to go to sleep.
In the end, and in desperation, I took the advice of Dino X and downloaded PleaseSleep. Success! A genius piece of software. It forces sleep when the Energy Saver preferences cut in but, even if I don't set exceptions, it won't force sleep if there's a DVD playing (for example).
Only had the Mac for a few months and I'll never go back to that other, unmentionable operating system; the Mac's just too good but I'm vexed that I'm having to use third party software to get it to work as it should (and was) - feels like a bit of a Win*s solution to me.

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?

After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

Mac Pro will not restart from dropdown menu

Hi all,
My Mac Pro will not restart from the dropdown menu or when clicking the 'restart computer' when installing software updates. I have an external firewire hard drive hooked up as part of my backup process. It contains a clone of my startup disk.
I have tried disconnecting the firewire drive, rebooting then attempting to restart from the dropdown menu. Still no joy. I always have to end up shutting down manually by holding the power button in and then restarting with the power button.
Any thoughts?
Thanks in advance.
Dennis

You might try Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
If your Shutdown functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
EDIT: Also, if you can launch Activity Monitor in your Utilities folder and see if you can find the process that is still running.
-mj
Message was edited by: macjack

My new Mac will not allow the download of CS5, how do i circumvent this issue? I own th dvd however my Mac Pro does not have a disc drive.

My new Mac will not allow the download of CS5, how do i circumvent this issue? I own th dvd however my Mac Pro does not have a disc drive.

Download from Download CS5 products

My mac pro does not start up because then hard disk is formatted

My mac pro does not start up because then hard disk is formatted, How can install the operating system.
regards,
Tassew

Did you erase the hard drive yourself? If not, what exactly are you seeing, and what happened immediately prior to you starting to see it?
Your profile indicates that you are/were running Lion (Mac OS X 10.7.4) on a retina MacBook Pro, so you should be able to hold down command-R at startup to enter recovery mode, and you can reinstall the system from there. But whether or not you need to do something else first depends on your answers to the questions above.

Newest Mac Pro does NOT work with CC14 - Will Adobe address this or not?

I have a Mac Pro late 2013 - the "trash can" - and when I tried installing Premiere CC14, it crashed multiple times before even completing the program's initial bootup. I had to install CS6 just to get operable, though this does not help me open the CC14 projects I have inherited. I have a colleague who uses a $1.5K laptop, and it works logarithmically faster and better with CC14 than my $4K new Mac Pro. I have all the Adobe permissions set to "Read/Write" and it shows absolutely no speed improvements over a much less expensive iMac. The CUDA feature is worthless unless Adobe develops a way for it to take advantage of the hardware configuration of the Mac Pro... And I'm having a hard time finding anything resembling an official statement suggesting this is anywhere close to a reality. I have many After Effects plug ins, and while yes: They are 3rd party plug ins, these are not just electives - They are part of my arsenal that my loyal clients have come to expect.
For 15 years I have used After Effects, Photoshop and Illustrator, all 15 of them on a Mac. In all that time I have NEVER experienced this kind of vagueness, finger pointing, and dodgy avoidance. There seems to be an allergy to making an announcement that anything resembling a coordinated effort is going to happen.
Why would I buy "the fastest" Mac if Adobe didn't work with it? MAC STORE staff didn't seem to think this was going to be an issue... Yet I can't find any official date as to when CC14 is projected to work with AMD architecture.
I'm feeling a lot like I did when Mac juked us with FCP-7 to FCP-X "upgrade.' Et tu, Adobe?
-JOHN BEYER
(PS - Yes I had Adobe Creative Cloud assistance help me troubleshoot)

No offense meant, but did you come here to ask for help, or are you just complaining? Because it seems an awful lot like the latter...
AlphaJB4 wrote:
I have a colleague who uses a $1.5K laptop, and it works logarithmically faster and better with CC14 than my $4K new Mac Pro.
So does CC2014 work on your Mac Pro or not? The laptop doesn't "work logarithmically faster..." than your Mac Pro if the software isn't working to begin with. Hyperbole, much?
The CUDA feature is worthless unless Adobe develops a way for it to take advantage of the hardware configuration of the Mac Pro...
CUDA isn't available on the new Mac Pro. OpenCL is. If you have the CUDA preference panel installed due to another piece of software putting it there, you're better served by deleting it. It's not going to help you at all on the new Mac. It may, in fact, cause problems.
Pr CC2014 works fine with OpenCL on the new Mac. Ae doesn't, but Adobe has never said Ae does or would. Anything you do in Ae is going to be CPU-bound. If Pr is crashing, then it likely means you have something else on your system that's mucking things up. Did you recover your user directory with something like Time Machine when you installed your new Mac? Was your user directory originally on some other Mac? What happens if you create an entirely new user from scratch, without restoring the home directory, and then try to kick Pr into gear? Does it run?
Provide some details and perhaps someone can help.

MAC Mini does not restart after Yosemite update

I bought my MAC mini in 2011 and I successfully updated to Mavericks with no problems. I am not sure why my MAC Mini will not restart after I updated to Yosemite. The completion bar gets stuck around 30%.
Any help or ideas appreciated
Larry

Okay, this is strange. I tried restarting three times yesterday with the same results. In fact I left it go overnight only to find the next morning that the bar was still stuck at 30%. I did a hard boot a little bit ago and waited a few seconds. I restarted an it booted up fine.
Larry

Mac Pro does not stay consistently connected to internet

Okay, I will try to be as detailed as possible...
I recently moved and had a new internet connection set up. The company replaced the modem and router I previously had (against my will) with their modem/wireless router combo. My Mac Pro has a wired connection, while all other devices (iPods, iPhones, PC laptop, etc.) in my home are wireless. The wireless devices all work consistently fine, however, the Mac does not. Typically, while having network diagnostics open, I reset the modem and everything is fine. After a few minutes, or after closing diagnostics, it no longer works again. Today, even after restarting the modem and getting all green lights, it doesn't seem to connect at all.
I have Windows installed under boot camp and the connection there works perfectly fine. This tells me there is an issue within my OSX settings, and not the equipment or connection. After learning this, my cable company's tech support basically told me to get lost and contact Apple. Though I'm paying them an obsene amount of money for crappy internet service, they really could care less about ensuring that their products at least work with their customers' equipment (they even told me they're tech support is unfamiliar with OSX).
I'm guessing something in my network settings is causing this, but I don't have enough in-depth knowledge about this particular subject to troubleshoot it myself. I'm desperate for a good samaritan to help as my business can no longer operate until I have working internet access.
PLEASE HELP ME!!!!

Disable the router function in the modem they provided and you can continue to use yours.
Modems, esp. cable, you may be able to return it.
There may be a list of modems that are compatible on their service - even some that aren't listed will be like SB6121.
And are you paying a monthly fee for their modem?
Others have "commented on" the Mac Pro not negotiating as well. But it was when you used your own router, right ?
I am totally sold on
having modem and router separate
Netgear routers - got the WNDR3400v2 last year and thinking about the next level, the R6300 probably this fall. I can even configure and monitor from iPad, iPhone, Android and their desktop app (Win and Mac).
I wonder if like my ISP they have a support forum, I'd be lost w/o. They can check the modem remote login and see what the modem is logging (over my head).
Had some odd electrial spike - 3x in a minute going onto UPS but not an outage. Spikes? left their modem 50% function and semi-crippled. I had to reset modem or it would reset itself I should say every 5-10 minutes at times. ISP could not tell until they got there. Then they found the modem was unable to connect to their activation page and had to replace it and the drop point on the telephone pole 70 ft away.
I now keep a spare modem of my own (SB6121) and continue to use theirs, Cisco.
You do have the ability to use your router, just not double-NAT is all.

Mac Pro does not wakeup 1 of 3 connected monitors: Philips times out

Hi,
(Setup)
I use a Mac Pro from 2014 (End 2013, AMD Firepro, D700 Graphics, 6core, 1TB SSD, 32MB, actual OSX Yosemite 10.10.2).
Connected are three monitors:
Philips BDM 4065 UC (40 great inches) via mini DP to DP cable
2x Dell 2410 (vertical/pivot to the sides of the 40" screen)
(Problem)
The setup is a dream for me, with one glitch:
when the Mac goes to sleep, all monitors nicely sleep with it. Waking the Mac up again, brings the Mac up and the Dells but not the Philips. It tries to get up (a bit of backlight to be seen), then shows a message that it goes to sleep again.
(Troubleshooting so far)
I experimented with it:
- power cycling the monitor brings it back into business
- pulling the DP cable temporarily does the job too ... sometimes
(Assumed root-cause)
Today I believe I found the reason:
In a forum sb. complained that the Philips takes long to wake up. Ok! The Dells that work are back ... instantly.
I tried this: wakeup, wait two seconds, put the Mac to sleep (mouse into active corner) and wake it up immediately.
The description sound a bit like "dance around the tree three times at full moon", but it works. What I believe that happens:
Fail:
- the Mac wakes up
- the Dells are awake instantly
- the Philips slowly wakes up
- the Mac gets impatient about the Philips and times out waiting for the monitor, stopping the signal supply
- the Philips falls back into sleep (and displays this as a message)
Workaround:
- the Mac wakes up, Dells wake up
- waste two seconds, while the Philips is still trying to wake up
- hammer the Mac back into sleep, and wake it up again
- the Philips is so slow it doesn't even notice this "brutal shaking" of the Macs wake-state
- the activite resets the wake-up-timeout of the Mac giving the Philips effectively enough time to report "ready" before even the second wake-up times out.
- et voila: a fully awake set of monitor
Now the big question:
I this timeout that the Mac on wake-up waits for a Monitor to become ready a configurable item? Can I extend this period by a few seconds to get my dream setup actually working? I fear I won't be able to make Philips solve the long wake-up time, so I check on the Apple side.
Thanks in advance.

So update. Boot camp now works...somehow. Not sure how I fixed it but this is what I did that lead to it. As you asked I tried to make a boot drive on a USB for OS X Mavericks, But the App store would not let me download it. So instead I made one with OS X Yosemite. After witch I shut it down, pulled the USB and restarted. At witch point I got a gray screen. I then restarted and opened the startup manager. It only showed a install and a restore drive. Tried restore, but it just brought me back to the gray screen. At witch point I opened disk utility and repaired my main HD, and restarted. Still gray screen. So then I booted in safe mode witch brought me to my account login (and my screen flashed a bit). After I logged in I restarted again. Witch once again brought me back to gray screen. So I tried reseting my NVRAM with no success. Started in safe mode again and went to my start up disk and selected my main boot drive and restarted. All returned to normal and boot camp now works. Not sure what I did to fix the problem as i'm not that computer savvy but thanks for all your help and I hope you can gather some information from my random desperate attempts to get my computer running normally again.
In the end it all worked out
thanks again

1st-gen Mac Pro does not boot in any way, not even in safe mode

I have a 1st-generation Mac Pro with the graphics card upgraded to NVIDIA GeForce 8800 GT; running 10.7.2. I have had no problems with the machine since I bought it in May 2007... until now. Specifically, the machine suddenly became non-responsive, froze (I do not remember this ever happening before), so I had to power it down and restart. After that, the machine does not boot in any way: does not start up with the Option key; no FireWire target mode; does not start up even in the safe mode. All I get when I power the machine up is the folllowing endless loop: (1) the display unit (30" Apple Cinema Display) waking up from sleep (white light going off) and (2) a flicker of white on the display while the optical drive sounds like checking for any inserted media... then again the display going to sleep for a few seconds and steps (1) and (2).
I could really use help here. Thank you in advance.

Linc:
I am also sure it is a hardware fault. I have tried to run the Apple Hardware Test from the orginal system disc: I opened the optical drive tray with a paper clip, inserted the disc and powered up the machine. However the machine only spinned up the disc, turned the display to standby, spinned up and standby, etc.
What kind of hardware fault could it be?
(1) the display unit (30" Apple CInema Display) -- I presume unlikely, since the computer should boot even with a defunct display unit or no display unit at all, for that matter;
(2) the graphics card
or
(3) the logic board?

Mac Pro does not sleep with lid open

Hi this was the original post I posted a couple days ago.
"Hi All,
I have had a problem with my mac book pro, it does not sleep while the screen is left open. The way I used to be able to tell if the mac is sleeping is the light on the front should flash as it does when the screen is closed. Here is what has happened in the past.
1. The original hard drive failed and was replaced with a 500gb
2. I have had the top case replaced as the mac book pro would not sleep with the screen closed
3. A clean install with OSX 10.6.8
After doing all this, the mac is still having the same issue.
When the screen is left open, I can hear the fans whirring away and the battery is drained as if I am running an intensive program. I can leave it all night with the screen up and wake up to the battery being completely dead. It usually takes about 3 hours or so. (105 cycles on the battery). The settings are set so that the screen and mac hibernate after 1 minute, and all applications are closed with wi-fi, etc turned off.
When my fathers and my brothers mac book pro is left open, the light on the front of the case flashes.
I have been to the apple store repeatedly and they are adament there is no issue with the mac. They did all their "tests" and the hardware was tested as "good".
Thanks for any help!
Chris"
The problem was solved with the following:
1. Deleting Login Items
2. Turning off blu-tooth
3. Unchecking "wake for network access"
Sources given:
http://support.apple.com/kb/TS3402
http://support.apple.com/kb/TS4167
However, the same problem came back last night.
Any ideas what is causing this?
Thanks,
Chris

I forgot to mention that I followed the same instructions that did solve the problem.
The things I tried were:
1. turning off wi-fi
2. closing all apps
Doing this however did not solve my problem either.
Chris

Mac pro does not restart

Similar Messages

Maybe you are looking for