Mac Pro DVD drive flaky

My Mac Pro 2006 DVD (Sony D-150A) drive is being flaky--it will read replicated CDs & DVDs, read and burn CDRs, but not DVDRs of any kind--video, data, + or - media. I can record DVD data/media, it just won't play back. Anyone else experience this particular issue? Wondering if a lens cleaning disc will do the trick, or if I should just can it. Seems that ATAPI drives are becoming difficult to find--anyone know if a generic drive will work, or do I have to invest in a "Mac" only drive?
Any suggestions will be appreciated!

Cleaner discs are so cheap, it is definitely worth a shot.
If no joy, look at OWC/macsales for a reasonably priced IDE/ATA drive that works in your Mac.

Similar Messages

Mac Pro DVD Drive Weirdness

Here's my problem:
I have a Mac Pro (Dual-Core), and the DVD drive is becoming increasingly flaky. Any DVD Video I burn from the internal drive from DVD Studio Pro projects to client MP4 files (I use either Toast Titanium 8 or 10) will play on any other computer (Windows or Mac) and even on cheap set-top DVD players, but won't play back on my drive. Mass-produced DVD, CD, and even CD-R media work fine. I've been using DVD+R media for about 3 years with no issues before now.
I've cleaned the lens with a Q-tip and 99% isopropyl alcohol, I've reset all the connections, tried different media (including Taiyo Yuden) and different burn speeds, and all I get is either "blank disc" or "Unreadable Disc" dialogs when I insert the disc after burning. Did I mention that this is pretty embarassing in front of clients?
So, before I use my drive for target practice, I'd like to know if anyone can recommend any kind of process that might be causing this (repairing permissions, trashing prefs, etc.). If the drive is end-of-life, fine--I just want to know one way or the other.
As usual, thanks in advance for any and all helpful info...
<Edited by Host>

Cleaner discs are so cheap, it is definitely worth a shot.
If no joy, look at OWC/macsales for a reasonably priced IDE/ATA drive that works in your Mac.

Mac Pro DVD drive won't load some software discs

I just bought two sets of Photoshop Elements, and my 2007 Mac Pro failed to recognize all six DVDs. I'm realizing I've had this problem with a few software discs in recent years, including some Final Cut Studio install discs. CDs and regular DVDs work fine - just some software DVDs are eventually ejected by the computer without showing up on the desktop. I have tried cleaning the drive with a disc cleaner.
My way around it has been to put these discs in my PC, make a copy, and then these copies load fine in my Mac. But it's a nuisance, and my PC won't be around forever.
Can anyone suggest what the problem might be? Or a decent external drive (Blu-ray?) that I might want to replace it with?
Thanks.

I'll try that tomorrow. Thinking it could also be:
1) The PRAMM battery. found info on that they can wear out close to 5 years. This MAC PRO is close to that now. And I use a lot of power on it.
2) MAC PRO is plugged into a SURGE PROTECTOR, instead of right into the wall outlet.
3) Been doing a lot of FORCE QUITS and HARD BOOT -- unplugging it directly when it wouldn't shut down soon enough -- lately this past year.
I just assumed that this MAC PRO with the XEON QUAD CORE etc., was a heavy duty enough NLE,
that i wouldn't have these problems. It's not fully loaded with all the chips it can carry...and I don't have near enough external terabyte hard drives for storing video and audio files to edit. I've been storing wayyy too much
on the internal hard dives and just have to stop that.
I noticed these past few days that much of the LETTERING for hard drive icons and folders' titles
were starting to look in OVERLAPPING of the lettering. That was my first hint that something was up.

Mac Pro DVD drive door sticking problems...

Hi all...
The aluminum drive door on one of my Mac Pro's 2 DVD drives sticks in the open ("down") position about 9 times out of 10 when in use. It has done this since I received it from Apple. Not a functional issue at all, so I didn't even think about sending it back at the time of arrival, thinking it might be just a bit stiff and "new"...
Now, over time, it has begun to get more annoying. I have tried everything in order to get it to work, sometimes seeming to have it fixed, but it ALWAYS returns to the "original state" of "stickiness"!!! Again, not a huge problem, but I'd like to get it seen about and figure out how to fix it once and for all. Anyone else having the same problem? I cannot take my Mac out of service, and this seems like such a simple thing...

Another poster fixed theirs by doing this…
http://discussions.apple.com/thread.jspa?threadID=696420

Mac Pro DVD Drive "Perma Sleep" - Any thoughts?

I have a MacPro with the following DVD drive in it:
PIONEER DVD-RW DVR-111D:
Firmware Revision: AB09
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
This morning I was burning a CD-R from iTunes. The burn finished and the system locked up with the "curtain of death".
Upon reboot I found that the DVD drive will spin at boot up, will eject from the keyboard, but it does not respond to any disc inserted in it. When inserting a disc, there is no spin up, no response from the system. I have inserted:
- Blank CD-R
- Blank DVD-R
- Recorded CD-R
- Purchased (factory made) CDs and DVDs
none of which respond. In response I have attempted:
- Resetting the machine, left it un- plugged for several hours, still not working
- Resetting the PRAM by booting with CMD-OPT-P-R
- Facing towards Cupertino and offering a bowl of corn flakes as snackrafice
None of which worked. Any thoughts, or is it take it to be repaired time?
Thanks
Bruce

Sounds like it is toast. You can get an immediate replacement at the Apple store. DIY replacement is very easy. OWC has a video on how. You can also find a replacement at a greatly reduced price from Newegg or OWC, but the immediate gratification will be missing during shipping. If it's under warranty, the Apple store should give you a new one, or I think they should and not have you wait for one to be shipped or require you to bring in your MP. Thes things are heavy!
Michael

Mac pro DVD Writer + DVD Studio pro + Toshiba HD-EP10 - HD DVD Player !!

Hi there..
I tried to make a short HD project in 4.7GB DVD by Mac pro Standard DVD Writer and i tried to play it in Toshiba HD-EP10 - HD DVD Player ( it gives msg ... the disc not contained DVD format and cannot be played ) so what is the mistake which i maded??
Mac Pro DVD writer can Burn HD Project OR should i by HD DVD Burner?
Can i make HD DVD in 4.7GB DVD?

NAWAF65095 wrote:
ok
how about the HD DVD Burning .. should i buy HD DVD Burner or the mac pro DVD Writer will solve this problem? and it will burn HD DVD SL-15GB and DL-30GB ?
You cannot burn a 15 or 30 Gig DVD from DVD SP and it is not supported by DVD SP. You can build those to a hard drive for replication
also what is the basic steps to creat the HD project in HD DVD not the DVD 5 and compatible with the toshiba player?
Best Regard.
You can make a HD DVD on the DVD 5 which will play with the Toshiba and it will give HD quality (and will not play on an SD player) video results, though you cannot author the extras that HD has (the new features in HD as compared to SD DVD), pretty much menus and playback of video. The steps above will create the DVD 5. Have not tried writing to a DVD 9 size for more running time

My macbook pro dvd drive opens all disks as blank, can I fix it?

My macbook pro dvd drive opens all disks as blank. I have no access to a near by apple store as I live in remote NSW. I purchased the macbook when I lived in Sydney and the old owner had just had a fresh copy of the OS loaded. I've read a discussion of a similar nature and the only comment was take it back, that is easier said than done. Is there a fix I can do from home?

Nifa86 wrote:
the old owner
If you didn't buy this from the store, the first thing you need to do is boot from the install DVD, erase the disk drive (perhaps even zeroing it) and install a fresh copy of the OS. You do not want to inherit any changes the previous owner may have made to the system software (or worse).
had just had a fresh copy of the OS loaded
…and the cheque is in the mail.
I am talking about putting in any CD that is known to have content and it loads the CD and says its blank with nothing on it
Who says?
Anyway, try
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>

How to use mac cd/dvd drive to install software on pc

My PC's dvd drive went bad. I need to install software from a dvd, is there a way to use my Macbook Pro dvd drive to install the software on the windows laptop?

If your PC is a desktop, and you intend to still use the PC for a while ...
I would do this ...
Use it as an excuse to get a BluRayread/DVDRW/DL. Lets you play BluRay and extends the "useful life" of the PC.
Or make it an external USB BluRay ...
eww ...
What are the rumblings about MBP using external BluRay?
For the record, iLS6, this is "turning lemons into lemonade"

Mac Pro Hard Drive Connectors

I need to replace the two screws that hold the hard drive connectors to the Mac Pro.
Does anyone know where I can begin to find these? They are two small black screws.
The previous owner of my Mac Pro removed them so that he could attach an SSD drive loosely to the Mac Pro.
I'm going to replace the SSD drive, as it failed, and it comes with a 3.5" tray that should attach to the Mac Pro hard drive carrier, but when I push it back in to align up with the hard drive connector, since he removed the screws, it doesn't align up and go in without me manually connecting it. I'd like to get it back to the way it was with the screws.
So...I wonder what part number that is or how I can get those two little screws, the exact ones?
Any advice would be great.
Thanks.

ChrisMc73 wrote:
Yeah there are two models for this Icy Dock SSD Kit...I think I want the screwless version.
MB882SP-1S-2B - uses screws to mount the drive and has more ventilation for a moving parts 2.5" drive
MB882SP-1S-1B - is screwless and is meant more for SSD drives
I use the screwless version.
As for dvwearhouse and others, unless you know the part number, how do you know where to look?

Is it ok to switch my mac pro boot drive to port 4?

hi, my brand new mac pro hard drive is kind of loud. is it ok to switch my main drive to port 4 farther back in the computer?
will it be slower?
thanks so much!

There will likley be no discernable difference.
If you do not have a drive in the first bay, it may change the airflow slightly, as it will no longer act as a dam to improve the airflow of the intake fan.

Using a Mac's DVD drive to load a DVD on Windows XP

I have a Windows XP machine which does not have a DVD drive, and a Mac laptop running Tiger which does - and some ethernet cable!
Is it possible to network the two computers together and use the Mac's DVD drive to access and run the DVD on the Windows computer? If so, how would I go about doing this? I have no experience of file sharing over Windows.
Thanks for the help

Hi Thomas,
I don't think you can, but it won't hurt to try... well, it won't hurt the Mac anyway.
If all else fails, you could try making a bootable image of it, there are several XP utilities for that, and this NetBoot might work...
http://tdonline.com/bootdisk.htm

Where can I find Mac Pro Hard Drive Holder?

Where can I find Mac Pro Hard Drive Holder? Only 4 came withe the computer and I need some more.
Anybody knows where I could buy some?
Thanks

http://www.transintl.com/store/category.cfm?Category=2705

Why my Mac Pro hard drive noise and too slow?

Why my Mac Pro hard drive noise and too slow? Totally 8 gb speed system but now very slow . Please give some suggestions

Another thing you can do in Lion (and ML) is click on the "Info" button in Disk Utility to get the SMART status of the drive.It's more detailed now than it used to be and it might tell you if something is wrong.
A lot can go wrong with a hard drive which is why I tend to point people to the downloads section of the following web site:
http://scsc-online.com
They have a free hard drive troublleshooting download book there. I reccommend people download that before asking questionis because there are tons of problems that can act like hard drive problems when there's nothing wrong with the system at all. For example, how full is the drive? How many applications are running? What's the status of Spotlight indexing? How many apps are you running? How much memory do you have?
I could probably think up 20 or 30 more if needed.

Can mac's DVD-drive be accessible for Windows-based systems?

I've tried to share mac's DVD-drive to PC and it's failed.
I know there is the option in Sharing menu, but it doesn't work.
So someone has an idea about the issue?
Here my steps to share DVD-drive to PC:
- select Sharing menu in System preference;
- turn on DVD or CD sharing;
- set "Ask me before allowing others..." check box;

You can share the DVD drive however it sounds like Windows may not have a DVD sharing feature like OS X has. I would recommend also asking in a MS Windows forum to see if your version of Windows offers that feature. Please carefully read:
http://support.apple.com/kb/HT1777?viewlocale=en_US
You will see Remote Disc is designed for OS X machines to access DVD/CD drives on other OS X or Windows machines. It is NOT designed for MS Windows machines to access the DVD drive on an OS X machine.

Mac Book Pro Dvd Drive Problems

I am having trouble with my mac book pro's dvd drive. It's not working properly, can I just take it into the Apple store and seek help?

you can, but you need to make an appointment with the genius bar first.

Mac Pro DVD drive flaky

Similar Messages

Maybe you are looking for