Mac Pro (Early 2008), Tiger Boot

Is my Mac Pro (Early 2008) able to boot from Tiger normally? I 've tried many times but it seems that Tiger has not the necessary drivers for my ATI Radeon HD 2600 Pro! Boots, but there is no communication with my graphics card. Is there any way to make it work?
I' ve tried to install Tiger from the DVDs of my MacBook Pro, MacBook and from the DVDs of a friend's previous generation Mac Pro, but not from a Retail Tiger DVD... Do you think that this is my problem?

The only hack is to find a system with 2600M it sounds like.
Or get X1900 that works in 10.4.11 and 10.5.x
Cloned system and then reapply the combo update would do if you do have an Intel Tiger system.
I've been using Vista x64 since late '06, before it was RTM forward, and the horror stories of trying to get it to run on some motherboards, BIOS, etc - I have more respect for what people are willing to go through, how different it is on Mac Pro, and the way OS X is tighter controlled to hardware... but it does make for problems.
People held off buying Mac Pro until CS3. And now some are considering buying ref'd units just to run Tiger or wait 3-6 months for things to catch up.
Game developers love 8-cores, cuts down time to compile, test and develop, and will pay dividends down the road in games that unless the power, but most, a lot, of applications really have trouble using more than 4-cores, it is a technical challenge and requires new compilers and tools.
ATI and Apple aren't likely to build any new drivers for Tiger

Similar Messages

Mac Pro Early 2008 not booting

Hey guys!
I walked into a problem with a Mac Pro early 2008 model.
I got this Mac Pro from somebody since it wasn't working anymore. I was told there could be a graphic card (Nvidia) issue which I think should at least be correct but I am also having trouble with loading EFI. The following things happen:
When I turn on the mac using a DVI to VGA adapter i have no screen at all. (I don't have any other options atm)
There is no HD inserted.
PRAM and SMC reset won't do anything, i'm not even sure it reads keyboard commands.
The fans all work even the one on the GPU.
Front LED just burns steady.
No lights on my USB (non Apple) Keyboard turn on.
The lights of the mouse just flashes on start up.
RAM LEDS light up on startup.
Motherboard reset button doesn't make anything change.
When I Press the button for the diag LED's, the Trickle Power and the Good Power led come on, the GPU LED stays off. The EFI LED is off aswel.
No RAM errors show up. Tried switching RAM and disconnecting RAM and GPU.
No startup chime what so ever.
I figured there could be something wrong with the EFI firmware (or logic board is just broken). I am trying to restore the firmware with a firmware restoration cd, but I can't get the cd tray to open. I pressed the on button and kept pressing it for a long time. All it does is makes my status LED flash a couple of times real fast, but then it goes back to normal state. No cd tray is opening and its not flashing 3 times fast, 3 time slow, 3 times fast as it probely should be doing.
You guys have any idea what to try next or how to restore the firmware?
Thanks in advance.

there's a boot code to run with the older machines
Pike wrote this code
Using this code will get you around the efi/boot issue and move on to OS 10.10.02
Installing Yosemite just prior to entering the efi/boot, then restart twice.
You'll need to research Pike's code, but your 2006 to 2008 machines are long ways from trash.
I'm upgrading my 2006 to 8 cores, Yosemite and 32 gig of ram.
Long live these early Mac Pros
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&v ed=0CB8QFjAA&url=http%3A%2F%2Fforums.mac…
maybe your issue is not related

Mac Pro (early 2008) wont boot pat the gray screen

First, my mac pro has three hard drives, bay 1 is time machine, bay 2 is empty, and bay 3 is A new Disk, running a newly installed 10.6.4. The computer was running great, then one morning I turned it on and the computer never got passed the gray screen after the chime and fan noise. I did a hard restart, holding down the power button, the computer booted normally to bay 3. This has happen twice. I have notice that if I restart from the OS it boots to bay 3 with no problems. It seem to only happen when the computer has been off for several hours.
Thanks for any help on this!

One thing at a time, and while I would hope you would use DW 4.2 on regular basis, plan for the worst and hope for the best, no reason to jump off the deep end and no, not processors or logicboard.
DW may not be able to boot your system from its CD, which I never use, just copy latest 4.2+ version to your boot volumes.
A printer or its cable, scanner, consumer USB device is much more likely, or drivers.
But, need to have a clean install of OS X (20GB volume) and a full boot image to play with first.
You can also use OS X DVD.
Safe boot mode - for when there isn't any other option and to do light maintenance.
http://support.apple.com/kb/HT1564

Mac Pro Early 2008 crash after gear on boot

Hi. I have a Mac Pro (Early 2008), with Mavericks installed. A couple of days ago, it crashed hard (in Portal, as it happens) and then wouldn't boot. When it was crashing it showed full green in various (dark? or random?) areas of the screen, and then random vertical lines of coloured noise. The cursor went jerky, and then stopped moving at all. Having decided this was a more serious problem than a simple steam error, I forced the machine to shut down with the case button, and then turned it back on again, but it wouldn't come up, and hasn't (with exceptions, see below) since.
The behaviour is:
Boot chime, Apple, Apple-with-spinning-gear, a sensible (it seems) amount of spinning gear, then the gear stops and I get some flashing on my screen (like, a complete red screen, or orange screen – colours vary – displayed for less than one refresh, so I see a brief flash of colour with tearing). Occasionally instead of flashing I get an unexpected reboot: once when this happened I also got the kernel's (multiple language) "Your computer restarted because of a problem" screen.
Safe Mode has the same problem (I get a progress bar, when the progress bar completes everything stops and "screen flashing" happens).
EFI boot volume selector works fine, but when I continue to boot, either from my main partition or the Recovery partition, I get the same problem.
Verbose mode works until the point where the graphical user interface should come back, which gives me a white screen and nothing (except screen flashing). I do get a certain amount of "kSMCBadArgumentError" before that point, but see below.
Single User Mode works as it should, fsck finds no errors, all my data appears to be on my hard drive as expected, but on typing "exit" to continue boot I end up in the same position as Verbose Mode. Trying kextload to load all my extensions gives the kSMCBadArgumentError lines, but no other problems (until I try to boot). I have already tried using SUM to remove all the launch agents/daemons/extensions from /Library/ (leaving only the ones in /System/Library/). This worked (I modified the disk as I intended) but didn't help me boot.
I did get the recovery partition to boot once (seemingly randomly), Disk Utility found no errors. The full Apple Hardware Test doesn't seem to be an option from the recovery partition? (I've moved house a few times in the last 6 years, and I don't know where my physical AHT disk is any more. I do have a friend who would probably be able to burn one if Apple provides the disk image as a download.) I have had a full successful boot once too (maybe on the restart after using the recovery partition?) which let me use my administrator user perfectly (I used it for about 5 minutes?), but then after logging out and while trying to log in as my "standard" user I got full green noise as before, and the machine locked up again.
I've rotated my RAM (I have 2x1GB sticks and 2x2GB, as well as my usual 6GB config I've tried each of the pairs in "two-stick" configuration). No difference, except on one boot I got error lights (full on) on one riser, I assume that was because I hadn't seated it properly during rotation, because I took it out and put it back in again and I've not had the lights before or since.
I've also tried swapping in an older system drive, but that made no difference. (The old drive may have been a little flaky itself, but single-user mode booting reliably suggests, at least to me, that my normal drives aren't the problem?)
Without wishing to privilege a hypothesis, could it be the graphics card? I have the Nvidia GeForce 8800 GT, I believe (it looks exactly like the pictures of that card online, anyway) – installed by Apple at build time. I tried taking it out and putting it back in again, in case it had become poorly seated, but it seemed firmly in place – for example, the PCIe retainer clip was fully engaged before I removed the card – and reseating it didn't make any difference. I don't have a second card to test with, unfortunately. I wouldn't mind getting a new card to keep the machine running, of course, but I'd like to make sure that it's going to solve my problem before buying it!
Thanks for any help you can give!
Edited to correct OS field, which didn't work. I really do mean Mavericks.

RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

Mac Pro Early 2008 Crash on Boot Up

I have a Mac Pro early 2008 running OSX 10.8.5, and yesterday morning for seemingly no reason I had a screen corruption and freeze up, a kernel panic and then it rebooted itself. I have tried all of the memory( no flashing LED over power switch), cleared and reset all of the PRAM via keyboard and motherboard etc etc and everytime I reboot it crashes at the same point with a screen corruption and reboot. When I tried to boot in safe mode it the bar got 50% of the way across and it rebooted. I booted in verbose mode and single user mode and on both the last entry related to 'Ambrosiaaudiosupport' (as best I can remember) before it rebooted itself again. I sent the Kernel Panic to Apple but as I cannot get back into the OS I cannot obtain another.
Is there a solution to this please, and if so what do I need to do to rectify it
Many thanks in advance
Alan

If you can't boot in the usual way, try a safe boot. During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. If you have more than one user account, you must be logged in as an administrator to carry out these instructions. Safe mode is slower than normal, and some things won’t work at all. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the startup volume is on a software RAID, you can’t boot in safe mode. If you're able to boot, launch the Console application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Console in the icon grid. Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select View ▹ Show Log List from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Mac Pro Early 2008 will not boot off Win7 Install DVD

Hello,
I am hoping someone out there will have encountered something similar and have some suggestions or ideas, because at this point I can't think of anything else to try.
I have a 2.8 Ghz 8-core Mac Pro (Early 2008) with an Nvidia 8800GT Graphics card. I am running OS 10.6.2, fully patched and updated.
I am attempting to install Windows 7 Ultimate via Boot Camp, and am encountering a rather odd problem.
Once I have launched Boot Camp Assistant it allows me to partition the drive and does so correctly, but when it attempts to reboot off the Windows 7 installation DVD, I encounter a blank grey-white screen similar to that which you normally get on startup but without the Apple logo. This continues for some time (it seems to vary), and then the screen goes dark and the monitor says it is receiving no signal. The fans on the Mac Pro go for a while, then it goes to sleep. I've tried leaving it for a couple hours, no dice.
I've tried both the 32-bit and 64-bit Windows install disks. I had the release candidate for Windows 7 installed previously, and it worked perfectly. I have since tried that same install DVD that I used to install the release candidate, and it encounters the exact same issue. Booting up off the Snow Leopard Install DVD works fine.
I tried doing a clean install of Snow Leopard on a spare drive, booting off that, and then starting from square 1 using Boot Camp Assistant to re-partition that same drive. Same problem. No matter what I do or try, my Mac Pro does not want to boot off this install disc. I have yet to try the disc in another machine to see if it works there, and I will as soon as I can, but the fact that the RC disc worked a few months back and now will not seems to rule out the boot discs as defective. I've also tried both my internal optical drives with no change, and no other discs have any issues.
I've already spent an hour and a half talking to Apple Technical Support, and they seemed stumped, so I'm hoping someone will have a notion. If not, I understand and appreciate you taking the time to read this- I have no idea at this point, and I'm generally a pretty knowledgeable user.
- Andrew

Thank you for your reply,
Pull all the drives you have other than the one that you will install Windows 7 to.
I think I will try this next.
Don't put Windows 7 on the same drive as OS X, give it its own.
That was initially what I started out doing.
And you don't even need Boot Camp Assistant.
True, but it's what Apple suggests using.
Might also want to try moving the monitor cable to the other card port.
Hmm, I think I'll try that.
Any other PCI cards or devices attached or installed should also be questioned or disconnected.
I've disconnected everything I could.
Always a good idea to start fresh which I assume you are doing (not trying to upgrade over RC etc).
Yes, the drive was empty to start with.
Honestly it seems like the Mac Pro is generally refusing to boot from any Windows disc. Things I've tried since my initial post:
- Loaded Windows 7 Install disc into my room mate's windows PC... loaded up fine, got to install screen
- Tried his OEM copy of Windows Vista 32-bit, same issue
At this point it seems like maybe some kind of firmware issue or some kind or graphics driver issue, but I'm pretty much grasping at straws at this point. It doesn't seem like it's even getting to the point where hard drives or anything matters.
It does recognize that I have a Windows 7 install disc inserted when I use the boot selector/startup disk chooser.
Thanks for the ideas, I'll try those out and see if any of them help,
-Andrew

Mac Pro Early 2008 + boot camp!!! pliz help from Pros!

Hi guys,
I'm currently using a Mac pro Early 2008 Quad 2.8 with 4 Gb of RAM. I also have 4 HDDs ( 2 of them are 1Tb( Western Digital Black and Green series), 1 is 320Gb-original comes with MP and one 250 Gb Western Digital caviar). All of my HDDs are internal. Recently, my superdrive failed on me. Therefore, i have to replace it using a Samsung OEM DVD optical drive ( TSSTcorp CDDVDW SH-S203D ) which was connected via the extra SATA port on my MP logic board. The optical drive was recognized fine by my MP.
Recently, as I used to work on both platforms ( Mac and PC) for audio mastering, I've decided to install windows 7 using bootcamp so that I can use Wavelab on my Mac for audio mastering. I had my 250Gbs SATA on HDD bay 4 formatted as a single volume for Bootcamp using Bootcamp Assistant. The process went fine until the system restarts for Windows installation. As I used Bootcamp before, i understood that freaking apple EFI wont read SATA (or external) optical drive to install Windows via Bootcamp, therefore I used RefiT as bootloader ( this method always worked for me before on other macs). I also have windows 7 ultimate ligit DVD. However, I experienced this :
- when I restarted my MP without having refit installed , there was always a flashing Apple + a prohibition mark and Windows installation didnt start. I've tried to reboot, hold down OPTION key so that the Windows installation DVD is read by optical drive and then choose it, same thing happened.
- After trying Bootcamp traditional way of installation without success, I install RefiT into my OSX drive ( 320 GBs), have MP restarted twice, then i got Refit boot menu, chose the windows installtion DVD..... now REFIT shows me that having some problem with Legacy boot and can't start the DVD.
Anyone is having the same problem like me with the flashing Apple+ prohibition mark ? Please HELP me!!!! I've used Bootcamp and REFIT for ages on Mac and never had this happened. Bleh!
I'm using Mac OSX 10.6.3. And below is my system profile:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
Disc Burning:
TSSTcorp CDDVDW SH-S203D:
Firmware Revision: SB00
Interconnect: ATAPI
Burn Support: Yes (Generic Drive Support)
Profile Path: None
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RAM, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO

hi all,
Finally I had my Mac pro Early 2008 Quad installed Windows XP SP3 on 2nd internal HDD.
Here's the update for anyone that is having the same problem as I had.
1st : you need to prepare some elements for a smooth installation
- Winclone for mac osx
- Windows XP image that was made from Winclone ( I had to download Winclone 1st, then ran to a friend of mine who had Windows already installed on his Mac using bootcamp and made an image of a version of Windows ( XP/vista/7) on his HDD via Winclone. The image will have file extension like this : xxxx.winclone ( xxxx is the name you choose)
- bootcamp 3.0 drivers for windows, just in case.
2nd : install Winclone on your Mac osx drive.
3rd: open bootcamp Assistant. prepare your drive for a Windows installation then quit it. However, somehow in my Mac Pro, the partition that BCA created wasn't mounted on my Finder, therefore I opened disk Utility and then reformat my BOOTCAMP drive to FAT32 or NTFS ( if you install NTFS-3G, disk utility will allow you).
4th: Open winclone. Now choose Restore. Then choose your Windows image that you made earlier and choose the Partition that you formatted for Windows and wait. It wont take long for the software to copy the image to your partition.
5th: now its time to restart your computer. hold down Option key so that you can choose the Windows Partition to boot.
6th: Windows will boot up and starting to scan for hardware changes again ( as the computer hardware ID and specs changed).
7th: if needed, use bootcamp 3.0 to install drivers for your Mac in windows.
8th: register your copy of Windows
Hope this help.by the way, you also want to force your Mac Pro to recognize all of your SATA HDDs and optical drive by force it to load up drivers in AHCI mode. There are lots of threads over Internet about how to do it. Perhaps InsanelyMac forum ( that's where i find it).
And finally good luck with guys who are having the same problems like me. It took me 3 weeks to find out how to do it.
Sorry admin for any violations ( I only want to help people cos I know its hard with guys who dont know ).
CHEERS!

Upgrade boot drive in MAC PRO Early 2008 to SSD

Looking to upgrade my boot drive on Mac Pro Early 2008.
Possibly with SSD, but wasnt sure of compatibility. Also, is it a huge sacrafice in storage?
I'd appreciate any assistance.
Thank you!!!
Lyle

Establish a Boot Drive on the fast SSD, and move all User files off to other drives. These articles may help:
Japamac's Blog: Make space for performance -- Moving the Home Folder
http://chris.pirillo.com/how-to-move-the-home-folder-in-os-x-and-why/
OSX Tips: Setting-up a new Mac from an old one or its Backups
Transferring Home Folders not on a Startup volume
be sure to heed Pondini's warning:
If you do put home folders on a separate volume, it's strongly recommended that an Admin account and its home folder remain on the Startup volume. If there isn't one, and you have a problem with the separate home folder volume, you cannot log on to your Mac! And in some cases it will greatly complicatetransferring to a new Mac.
So if you're transferring from an available Mac that doesn't have an Admin account on its Startup volume, create one via System Preferences > Accounts before starting.
I have created a new User Tip with this information in it:
User Tip: Creating a lean, fast Boot Drive

Can't install montain lion, mavericks or yosemite on my mac pro early 2008 8core

I tried installing mountain lion mavericks and yosemite on my mac pro early 2008 I upgraded the video card to see if that was the problems and still the same the problem is that after installing even during install the mouse moves super slow and the keyboard won't work at all so I can't entern
any information this is with a clean install and even if I update lion it does the same everything works fine on lion 10.7.5 problems there does any one know what could be the issue here? I'm only running one monitor and its the 30 inch cinema display here are the specst of my machine excuse my grammar and spelling it was never my favorite subject
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number of Processors: 2
Total Number of Cores: 8
L2 Cache (per Processor): 12 MB
Memory: 8 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
Serial Number (system): G881111VXYK
Hardware UUID: 714C0BE4-9A35-5C33-BF74-0F55F7C31B5F
AMD Radeon HD 6870:
Chipset Model: AMD Radeon HD 6870
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x6738
Revision ID: 0x0000
ROM Revision: 007-NETKAS-ORG
EFI Driver Version: 01.00.507
Displays:
Cinema HD:
Display Type: LCD
Resolution: 2560 x 1600
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: CY03018WXMP
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
ECC: Enabled
DIMM Riser B/DIMM 1:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x014F
Part Number: 0x5453324741504D41435038502D5420202020
Serial Number: 0x00031CFB
DIMM Riser B/DIMM 2:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x014F
Part Number: 0x5453324741504D41435038502D5420202020
Serial Number: 0x00031CFB
DIMM Riser A/DIMM 1:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x01431026
DIMM Riser A/DIMM 2:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5935
Serial Number: 0x57656411
DIMM Riser B/DIMM 3:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser B/DIMM 4:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser A/DIMM 3:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x01172313
DIMM Riser A/DIMM 4:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x01172714
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
WDC WD5000AAKS-00A7B0:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: WDC WD5000AAKS-00A7B0
Revision: 01.03B01
Serial Number:     WD-WMASY0158891
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
HD:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 484.82 GB (484,820,348,928 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/HD
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk2s3
Content: Apple_Boot
WDC WD5000AAKS-00A7B0:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: WDC WD5000AAKS-00A7B0
Revision: 01.03B01
Serial Number:     WD-WMASY0158891
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
HD:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 484.82 GB (484,820,348,928 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/HD
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk2s3
Content: Apple_Boot
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZBHBEEAH
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: MBR (Master Boot Record)
S.M.A.R.T. status: Verified
Volumes:
UNTITLED 1:
Capacity: 500.11 GB (500,107,860,992 bytes)
Available: 449.41 GB (449,412,988,928 bytes)
Writable: Yes
File System: MS-DOS FAT32
BSD Name: disk1s1
Mount Point: /Volumes/UNTITLED 1
Content: DOS_FAT_32
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZBHBEEAH
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: MBR (Master Boot Record)
S.M.A.R.T. status: Verified
Volumes:
UNTITLED 1:
Capacity: 500.11 GB (500,107,860,992 bytes)
Available: 449.41 GB (449,412,988,928 bytes)
Writable: Yes
File System: MS-DOS FAT32
BSD Name: disk1s1
Mount Point: /Volumes/UNTITLED 1
Content: DOS_FAT_32
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZAK1RKSF
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
machd:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 372.42 GB (372,419,407,872 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk0s3
Content: Apple_Boot
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZAK1RKSF
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
machd:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 372.42 GB (372,419,407,872 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk0s3
Content: Apple_Boot
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported

Try this:
clone your system and repair it with Disk Warrior instead
Or try a clean test system install on another drive
A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
Try to run w/o externals. MyBook included.
Is that a 7200.11 1TB? they had a lot of issues.
Run AHT off your OEM DVD.
2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current. Hopefully you have a UPS and is 1500VA unit.
When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
TimeMachine has its own bad habits, especially with Green drives and some externals.
Try to rule out everything and then add back one at a time.
And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old. Might want ATI 5870 or 5770.

Black Screen for Install of Windows 7 on Mac Pro Early 2008

I have a mac pro early 2008 with lion 10.7.4 and boot camp 4.0.3 I think... anyways the problem I have is when I am in boot camp, and configure the HDD partition, then the machine reboots... when it reboots and starts up boot from the install DVD (legit retail copy) I just get a black screen on both monitors. No curser, nothing just a black screen, same as I get when the machine is off! the little white LED lights are on and nothing...
I can hear the DVD spinning up and down a few times then that just stops too...
I have tried resetting the PRAM, pulling the power and watch battery inside for a few minutes, I tried the "fix" that is online for the imac problem with the answerfile and got no different resutls with anything, still the same probelm.
I have the OEM ATI Radeon video card 512MB.
* as a side note, I was never able to download the windows support drivers prior to trying the install... I tried and tried for the last two days so this time I "unchekced" that box and just went for the install...
Any help will be greatly appriciated, thank you :-)
Mike

Hey Hatter, I know this is a little old but I've just picked up this thread and I wonder if you can help. I get the same issue as:
JRASupport
Jun 28, 2012 1:56 PM
I have a mac pro early 2008 with lion 10.7.4 and boot camp 4.0.3 I think... anyways the problem I have is when I am in boot camp, and configure the HDD partition, then the machine reboots... when it reboots and starts up boot from the install DVD (legit retail copy) I just get a black screen on both monitors. No curser, nothing just a black screen, same as I get when the machine is off! the little white LED lights are on and nothing...
I get that dreaded black screen following partioning of my drive on the Windows 7 install on Mavericks on a Macbook Pro late-2008 (MBP5,1) but I'm at a loss to work out where the solution lies in the thread! ;-(
To date I've spent about 5 days going back and forth trying all sorts of combinations, including the obvious:
- removing bootcamp 5 and reverting to 4
- installing the imac drivers
A HUGE thanks if you can offer any help as I'm at the end of my tether...!
Adam
BTW I'm working off USB with 32 bit Windows 7 ISO

Mac Pro (Early 2008) shuts down unexpectedly

I have a recurring problem with my Mac Pro (Early 2008). I put the computer to sleep; then, when I tap a few keys on the keyboard to wake it up, I hear the start-up sound and it boots up as if it were shut down.
This is particularly strange, because I do not have to use the "power" button on the tower to turn it on. When I tap the keys on the keyboard, as if to wake it from sleep, it makes the start-up sound and boots. I am guessing that somehow it is shutting off when I first try to wake it from sleep, and then must re-boot. But this is odd behavior that I've never seen from any Mac, and I've been using them for almost 20 years.
Any ideas? I'm going to call Apple Support but I always dread those long wait times and often fruitless conversations. I did not migrate information from my previous system; I took the time to manually migrate my files and reinstalled all apps from DVD specifically to avoid problems like this. Very frustrating.

I've noticed the same problem for one day with my new MP 2.8 dualquad, got a reboot after every sleep.
This solved the issue for me:
• Reset the PRAM (Boot the machine and hold ALTCOMMAND+PR for 3 startup gongs)
• Reset the SMC -> http://docs.info.apple.com/article.html?artnum=304123-en
Good luck

Mac Pro (early 2008) keyboard stops working

My Mac Pro (early 2008) has the Apple USB extended keyboard go no ops after the computer has been on for a while. This has been happening for quite a while and began shortly after I installed 10.6. It seemed to disappear for a while after 10.6.6 showed up but has returned since 10.6.8 has arrived. It seems to happen only when the computer goes to sleep but it does not happen every time. But it does happen most times. It appears that all USB ports on the back of my Apple monitor become unusable when this happens.
Anyone have any ideas? This has the feel of the sleep issue this model had with an early OS a few years ago.
MacPro3,1, 10.6.8, 32 GB RAM, dual 32 GHz quad-core Xeon chips, 4 bays populated, 1 TB, 2 TB, 2 TB, 2 TB

Scott..
Try a Safe Mode boot...
Startup your Mac in Safe Mode
A Safe Mode boot takes a longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
Then try the keyboard.
A Safe Mode deletes some system caches that may help, especially after an update.

Mac Pro (Early 2008) freezes, reboots to recovery system, trouble locating startup disk

I have two issues which may or may not be related with my Mac Pro. First, off and on for several months is has been frozen when waking from sleep. I can hit a key and see my desktop with the windows I left open, but I get the spinning beach ball and the time is typically several hours behind. The only way I can get it to start is to restart from the power button. This typically happens overnight when my computer has been asleep for a long time. Sometimes I hear the fan run while the computer is asleep and I don't know if that is related. I've tried switching from Firefox to Chrome to see if that was the problem since I typically have a few tabs open on Firefox when it freezes, but that does not solve the problem. The next step I plan to try is to get a can of compressed air and clean the fan and check if the video card air intake might be clogged, based on information I have read in various forums. Does anyone have other suggestions for things to try to eliminate the freezing? Another suggestion I read was to get a new logic board battery installed but I hate to lug this thing into an Apple store unless I really have to. Most of the time I'm comfortable fixing things on my own.
The second issue is that when I reboot after shutting down the computer with the power button, it does not always load the startup disk. Sometimes I get the recovery system instead, and if I try disk repair, restore from backup, or the startup disk option from the apple menu, it cannot locate the startup disk. Usually after a few tries, I can restart it and get my desktop, but I'm not sure how long that will work. I hoped that resetting the NVRAM would take care of this but it has not fixed the issue. When I do disk repair, it says the drive is fine. I've also used idefrag to clean up the drive. I'm thinking my hard drive might be about to die and I should just get a new one, but I don't want to spend the money if that is not the issue. I have 83 GB free on the drive so space should not be an issue.
Any suggestions on fixing either or both of these issue would be very much welcome! I need to make this computer last at least a couple more years.
Specs:
Mac Pro early 2008
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 8 GB 800 MHz DDR2 FB-DIMM
Graphics NVIDIA GeForce 8800 GT 512 MB
Software OS X 10.8.5 (12F37)

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

Maximum Size of Hard Drive in Mac Pro (Early 2008)

What is the Maximum size of Hard Drive that I can install in drive bay 3 or 4?
Computer info below:
Model Name: Mac Pro (Early 2008)
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 14 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
Hardware UUID: FF121465-84A1-52F2-A94A-58A60A20F4AF

WE don't know, all there are today are 2TB and those are fine. I think you could RAID 6 for 10TB and maybe then?
Serious, there are none. Do you really expect to hit some ceiling?
http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

What drive in Mac Pro early 2008 or 2009?

I purchased a Western Digital Black 1Tb SATA hard drive and it did not work in any of my three Mac Pros (two are Early 2008, one is early 2009). It made a strange noise and was never seen by Disk Utility no matter what I did.
There are already three other drives in these machines, some of them are Western Digital drives and they work fine, but they were purchased years ago.
I returned the drive and purchased a Western Digital Red 1Tb drive in replacement. I chose a Red because I will be setting up a RAID system soon but needed it temporarily as storage in the Mac Pro. It didn't work at all in the Mac Pro Early 2008. At first it seemed to work but at restart, the system said the disk was not formatted, although I had formatted it successfully (but it really took a long time) with Disk Utility.
On the Mac Pro Early 2009 formatting was difficult. I tried to make two partitions instead of one and finally managed to format it and even copy some files to it. But Disk Utility couldn't verify it and Disk Warrior said it was having problems because of disk malfunction.
Apparently, I should be able to put a 1Tb disk in these machines, and the SATA 3 drives are supposed to be compatible with the SATA 2 of the Mac Pros. But it doesn't work although we spent hours trying everything and reading everything we could find on the subject.
My question is: are these drives supposed to work in older Mac Pros from 2008 and 2009?
If not, what drive should I purchase for these machines? I need a quiet, fast drive.
Thanks.
Ellen

Yes, I'm aware that SSD is the way to go. I have one (OWC Mercury Extreme Pro SSD), 480 GB, as my boot disk. It has the system and all my apps, plus my virtual machines for Windows. These are used very little, only to check if things we put on the web are OK in the various Win Browsers. But they need to be fast because otherwise, I'll go nuts.
About using SSD for Photoshop's scratch, I seem to remember reading something saying that it will reduce the drive's life somewhat. I don't know how much or if it matters, or if it's the better choice anyway.
Actually, the reason we still have these old Mac Pros (two for work, one for the server) is that, every year, we hoped to see some major improvement and put off upgrading because we didn't feel the new ones announced year after year would change our life.
We've been using Macs for almost 30 years now. The first was a Mac Plus 512k, in January 1985. (My first computer (in 1981) was a ZX81, with 1k of RAM... I did get a 16 k plug in extension though). We usually upgrade when the specs show a speed improvement of at least 4X, or when the architecture changes radically. All this to say we are now waiting to spend all our Christmas money on some shiny new tubular Mac Pros. We will then have to reconsider our whole setup, and add some external Thunderbolt drives. At that time, I'll be back to discuss the best options. Till then, this will do.
And the reason we tried a Red was because we thought maybe we could use it later on a dedicated machine used only for music over the network. The drive is used just about continuously all day long. Bad idea obviously.

Mac Pro (Early 2008), Tiger Boot

Similar Messages

Maybe you are looking for