Mac Pro freezes few minutes after starting download of additional content

Hello everyone!
So... I've downloaded Logic Pro X from the App Store today. Install and download of basic content went smoothly, but problem occured when I started download of additional content. Few minutes after download had been started, whole computer would just freeze, and I would have to shut it down by holding the power button. I tried downloading just small packs of content but it didn't help every time, in 80% cases it would freeze again.
Logic was never installed on this machine earlier, at least not after clean Mavericks install few weeks ago.
What could be the cause to this problem, and can any of you help me?
Thanks in advance.
Dragoslav

I couldn't move the cursor and clock stayed on the same second for more than 20 minutes...

Similar Messages

My MacBook Pro 15" i7 2011 freezes suddenly minutes after starting up.

My MacBook Pro 15" i7 2011 freezes suddenly minutes after starting up the computer.
Sometimes it beeps after freezing, and keeps beeping forever until I shut down the computer by pressing the power button.
Other times the screen gets a little darker and a text appears saying I need to turn off the computer by pressing the power button and restart, but after restarting the computer freezes again. Each time I turn it on it takes only a few minutes to freeze it seams, about 2-3 minutes or less, and occasionaly it doesn´t even start up.
I don´t recall the exact version of the operating system, its MacOSX (10.6 or something)
Any sollutions?

Three beeps is usually indicative of a RAM problem. Take out one RAM chip and see what happens and then swap with the other one. See if there is a difference. Also engage the Apple hardware test and see if that offers any useful information.
Ciao.

Firefox shuts my computer down a few minutes after starting it.

It's real simple for anybody but people at Mozilla. MY COMPUTER SHUTS DOWN a few minute after starting FireFox. The Firefox website is broken, and nobody pays attention to anything. In plain english, everything Mozilla bites. Got it now? Not likely...
== Crash ID(s) ==
0x00000000
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; GTB6.4; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.0.30729; .NET CLR 3.5.30729; .NET CLR 1.1.4322; InfoPath.2; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

The entire computer crashes? I don't think I've ever seen a case where Firefox crashes the operating system. Could you give us more details?
* Does the computer turn off, or do you get some error screen, or does the entire system freeze?
* Are you usually on the same site when it happens?
* Do you have any add-ons installed?
* When was the last time you scanned your computer for malware?

Mac Pro display remains black after start up.

My 2008 Mac Pro display remains black after start up. It is plugged in properly and the light comes on, but the screen stays black. It first started doing this about a week ago, but after a manual restart or two, it would start up properly with the display working. Today the display has remained black every time I've tried to start up. Any suggestions for troubleshooting would be greatly appreciated! Thanks!

Safe Mode uses a very simple way of talking to the screen -- it does not even load the screen driver, and it uses a very common low resolution.
If it does not work that way, it simply does not work. You need a replacement graphics card.
User Tip: Mac Pro silver tower (2006-2012) Replacement Graphics cards

After a few minutes after start up my fan comes on full and stays on

After a few minutes after start up my iMac fan comes on full and stays on, loud and quite annoying!

Try an SMC Reset.

Mac Pro Freeze/Display glitch on start up

I've only been using my new Mac Pro (late 2013) for a few days now but am expereicing an issue on restart/start up. It seems the computer struggles to search for the two new 1920x1200 Dell displays that are hooked up to it through mini display-DVI converters.
Sometimes it only sees one display, but when it finally finds the second one (usually before the login screen,) the second display appears to look corrupted showing a grid of weird static blocks. This then makes the pinwheel appear and login screen become translucent and eventually freeze forcing me to perform a hard reset.
Usually after a few hard restarts and switching the display cables around, it eventually starts up.
I'm running 10.9.3 btw and also am plagued with the Adobe/GPU issue. Could this problem also be related to OS X?
Thanks.

Try using another keyboard; I know that may sound unrelated, but it's simple, and this is my reason for the advice:
I've been having my computer shut itself off either during sleep or while trying to wake from sleep. Attempting to reset my pram, as directed by AppleCare, caused my mac pro to exhibit these symptoms exactly: one mostly black screen with peculiar rectangular patterns which occasionally contain bits of text, and an Apple logo covering login area of other screen.
I found that these issues only occurred while I had the apple keyboard connected; it is the same keyboard as depicted in the two images above. After disconnecting that keyboard I was able to use another to reset the pram successfully.
The sleep and shutdown issues I've been having are still occurring.
Anyway, try removing your Apple Aluminum USB Keyboard and see if that helps. It may still just be a treatable symptom of a bigger hardware problem, but it might help some of you out.

Mac Pro takes few minutes to shutdown

since a long time,my mac pro takes a few minutes to shutdown after using the shutdown-menu.
is there anyone, who has the same problem and knows a solution?
bst rgds from germany!

USB and FireWire devices?
Have you run disk repair utilities? especially Disk Warrior 4.1.1 or TechTool Pro 4.6.2?
Cloned your system and tried with that?

Mac Pro freezes when Time Machine starts backup

MacPro1,1, Lion 10.7.5 (this machine won't run Mountain Lion).
Processor Name: Dual-Core Intel Xeon
Processor Speed: 3 GHz
Number of Processors: 2
Total Number of Cores: 4
L2 Cache (per Processor): 4 MB
Memory: 12 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005D.B00
SMC Version (system): 1.7f10
I'm backing up to a newer 3Tb Time Capsule. When TM backup starts other applications freeze, Force Quit is unaccessible, I have to hold down the power button to shut down. This started about a month after starting to use the Time Capsule, now 2 months old. Here's some log data from when TM starts to the shut down:
9/7/13 9:54:44.000 AM kernel: ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
9/7/13 9:54:44.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Data failed 49.
9/7/13 9:54:44.000 AM kernel: AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again
9/7/13 9:54:44.560 AM com.apple.backupd: Waiting for Spotlight to finish indexing /Volumes/Time Machine Backups/Backups.backupdb
9/7/13 9:54:45.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Data
9/7/13 9:54:45.000 AM kernel: ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
9/7/13 9:54:45.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Data failed 49.
9/7/13 9:54:45.000 AM kernel: AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again
9/7/13 9:54:46.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Data
9/7/13 9:54:46.000 AM kernel: ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
9/7/13 9:54:46.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Data failed 49.
9/7/13 9:54:46.000 AM kernel: AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again
9/7/13 9:54:47.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Data
9/7/13 9:54:47.000 AM kernel: ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
9/7/13 9:54:47.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Data failed 49.
9/7/13 9:54:47.000 AM kernel: AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again
9/7/13 9:54:48.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Data
9/7/13 9:54:48.000 AM kernel: ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
9/7/13 9:54:48.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Data failed 49.
9/7/13 9:54:48.000 AM kernel: AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again
9/7/13 9:54:49.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Data
9/7/13 9:54:49.000 AM kernel: ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
9/7/13 9:54:49.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Data failed 49.
9/7/13 9:54:49.000 AM kernel: AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again
9/7/13 9:54:50.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Data
9/7/13 9:54:50.000 AM kernel: ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
9/7/13 9:54:50.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Data failed 49.
9/7/13 9:54:50.000 AM kernel: AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again
9/7/13 9:54:50.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Data
9/7/13 9:54:50.000 AM kernel: ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
9/7/13 9:54:50.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Data failed 49.
9/7/13 9:54:50.000 AM kernel: AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again
9/7/13 9:54:50.734 AM configd: network configuration changed.
9/7/13 9:54:51.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Data
9/7/13 9:54:51.000 AM kernel: ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
9/7/13 9:54:51.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Data failed 65.
9/7/13 9:54:51.000 AM kernel: AFP_VFS afpfs_DoReconnect: sleep for 2 seconds and then try again
9/7/13 9:54:52.031 AM configd: network configuration changed.
9/7/13 9:54:54.000 AM kernel: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Data
9/7/13 9:54:54.000 AM kernel: ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
9/7/13 9:54:54.000 AM kernel: AFP_VFS afpfs_DoReconnect: Logging in with uam 13 /Volumes/Data
9/7/13 9:54:54.000 AM kernel: AFP_VFS afpfs_DoReconnect: Restoring session /Volumes/Data
9/7/13 9:54:54.000 AM kernel: ASP_TCP ReplayPendingReqs: replaying slot 0 with reqID 2981 afpCmd 0xB on so 0x1e43ce68
9/7/13 9:54:54.000 AM kernel: AFP_VFS afpfs_DoReconnect: get the reconnect token
9/7/13 9:54:54.443 AM SLRuntimeLoader: clip: empty path.
9/7/13 9:54:54.444 AM [0x0-0x17d17d].com.canon.SLRuntimeLoader: Sep 7 09:54:54 My-Mac-Pro-6.local SLRuntimeLoader[3031] <Error>: clip: empty path.
9/7/13 9:54:58.738 AM Address Book: Subscription request completed
9/7/13 9:55:10.581 AM [0x0-0x181181].com.apple.iTunes: 2013-09-07 09:55:10.581 The plugin 'Quartz Composer Visualizer' failed to load because it has the wrong CPU architecture for this version of iTunes. (3585)
9/7/13 9:55:22.038 AM com.apple.backupd: Starting standard backup
9/7/13 9:55:22.066 AM com.apple.backupd: Network destination already mounted at: /Volumes/Data
9/7/13 9:55:33.811 AM com.apple.backupd: Disk image already attached: /Volumes/Data/My Mac Pro (6).sparsebundle, DIHLDiskImageAttach returned: 35
9/7/13 9:55:35.601 AM com.apple.backupd: Disk image already attached: /Volumes/Data/My Mac Pro (6).sparsebundle, DIHLDiskImageAttach returned: 35
9/7/13 9:55:36.791 AM com.apple.backupd: Disk image /Volumes/Data/My Mac Pro (6).sparsebundle mounted at: /Volumes/Time Machine Backups
9/7/13 9:55:36.988 AM com.apple.backupd: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
9/7/13 9:55:55.532 AM com.apple.backupd: 1.77 GB required (including padding), 1.09 TB available
9/7/13 9:57:24.944 AM com.apple.backupd: Copied 3262 files (21.5 MB) from volume Internal 1 3TB.
9/7/13 9:57:31.941 AM com.apple.backupd: 1.92 GB required (including padding), 1.09 TB available
9/7/13 9:58:02.477 AM mdworker: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
9/7/13 9:58:02.480 AM mdworker: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
9/7/13 9:58:02.482 AM mdworker: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
9/7/13 9:58:02.483 AM mdworker: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
9/7/13 9:58:02.484 AM mdworker: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
9/7/13 9:58:02.485 AM mdworker: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
9/7/13 9:58:26.993 AM com.apple.backupd: Copied 1720 files (304.1 MB) from volume Internal 1 3TB.
9/7/13 10:01:45.000 AM bootlog: BOOT_TIME 1378566105 0
9/7/13 10:01:58.767 AM fseventsd: event logs in /.fseventsd out of sync with volume. destroying old logs. (307606 12 307803)
9/7/13 10:01:59.000 AM kernel: npvhash=4095
9/7/13 10:01:59.000 AM kernel: PAE enabled

Thanks, Linc. Based on earlier posts around the same problem I assumed it was something to do with the computer. TC is up to date and restarting it seems to have corrected the problem, at least during the one TM backup that's gone since.
BTW, I have two internal 3 TB HDs, one with all content, the second which mirrors the first and is updated every night. I'm using the TC/TM as the backup to my backup. I also take a new full copy offsite weekly. Curious though, what do you think of backing up to cloud storage?

I downloaded mavericks and now mac pro takes a minute to start up

How do I fix this??? Downloading Mavericks has slowed my start up to over a minute!

OSU Beavers,
it isn’t Apple’s responsibility to keep track of what your software needs to run; that’s your responsibility. For example, anyone who relies upon PowerPC software running under Snow Leopard should not accept an OS upgrade, because no version of OS X after Snow Leopard supports Rosetta, which is what allows the execution of PowerPC software under Snow Leopard.
Which of your drivers did the people at the Apple store tell you were outdated under Mavericks?

H215 Loses the analog video signal after a few minutes after start up.

After Windows 7 is loaded and about 30 minutes to an hour of normal screen and computer usage, the display goes black and my Viewsonic monitor says that the analog signal is missing and then goes into power save mode. Why is this happening? And the only way to resume the use of the computer is to force shut down the tower and then to power it back on. Which then runs through the failed start because I had to force shut down the system due to the display losing its signal. Please assist in this matter. I just bought the system a few days ago and for it to be doing this is quite dissatisfying. Thanks.
The system specs is:
CPU: AX2 250
RAM: 4GB
HDD: 1 TB
ODD: DVD-RW
OS: WIN 7 HP
D4RK51D3 G.F.X. LLC
Engineering the 1337 way.

Hello Oremus Productions,
First of all, sorry for this frustrating issue. The first thing to check with OS X Mavericks or Yosemite is the permissions of your Adobe folders. Here is blog post to check out: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
The other thing I'm curious about is ProRes and if Premiere is handling it properly. Tell me, do you have Final Cut Pro 7, Final Cut Pro X, iMovie, or any of the Apple video products installed? Do you have any components in your Mac HD > Library > QuickTime?
Thanks,
Kevin

HP Pavilion notebook - audio keeps disappearing a few minutes after starting pc

Hello everyone. This is my first post in this forum.
Since about a month, I've been having an annoying problem with my notebook's audio. Quite often, when I turn on my pc, my audio disappears after a couple of minutes. Sometimes there's no sound right from the start. The mute button stops working, because normally there's an orange light when you turn off the pc sound, well that doesn't happen anymore. Windows Media Player can only play such formats as mp4, avi etc with no sound in the background. However, it can't open mp3 files at all (error message shows up). Videos on websites such as youtube stop playing after a few seconds (although the buffer is still running, and of course there is no sound).
So basically, there's no type of audio coming from the speaker (like error sound, message sound, command sounds etc...)
I tried connecting headphones and external speakers, but no luck. I updated my audio driver, but it didn't help.
Furthermore, when I launch audio test from Control Panel, an error message shows up which says "Device currently used by another application. Please close all the applications that are using the device, and retry."
My notebook is quite new. It's an "HP Pavilion 15 - e070sl"
The whole thing is driving my crazy. It's really frustrating. Any suggestions would be greatly appreciated. Thanks.
This question was solved.
View Solution.

Hi
See if this thread has the solution to your problem. HP Expert Dragon-Fur has explained it & given few links for the steps of resolution:
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/lost-sound/m-p/4231472
Regards
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Notebook freezes few seconds after start. Overheat? New video cable?

Hello and thanks for your attention.
HP Pavillion DV5-1235e
Windows Vista
4 years old.
I wanted to clean the fan on my laptop since it is 4 years old now. So I had to take apart everything and took it back together. I did remove the old thermal paste and putted some new. Except that I didn't change anything. And I also canged the video cable for a new one.
My first attepmt to start didn't end well. I pressed the power button my notebook started but the sreen didn't start and from there on he didn't even boot. (the HDD led didn't blink ) So i found a solution for that. pulled out the power suply, pressed the power button for 30-60 sec. Puted the power back and viola! It worked. But I didn't even open a web browser and the laptop freezed. So i pressed the power button for 3 sec and the laptop turned off. Turned it back on I had the same problem as in the first attemp. So had to pull out power suply, press power button , put power suply back on and it worked again but i didn't have time to open speedfan to see the temp so I don't know what happend actualy. The fan is rotating. the thermo paste is new. everything should work fine.
edit: I managed to start speedfan. The temperatures were low. The lowest I have ever seen them. But he still freezed
edit2: In safe mode. it works longer but freezes(does freeze and the monitor turns off)
Thank you who made it to this point.
Looking forward the anwsers.

Hello AmlnnN,
I understand have you finished doing a little maintenance   work on the computer it now freezes periodically is that correct? I will do all I can to help you resolve this issue.
First thing lets run a couple test on some of your hardware.
See steps below:
1.       I want you to boot into the bios menu this link will show you how.
2.       Once in bios go over to the diagnostic option at the top.(Note you will need to use the arrow keys to navigate)
3.       You may see 2 test there if that is the case run both test.
4.       It may take some time so please have the ac adapter plugged in.
5.       Once the test finished press F9 to setup defaults and then press F10 to save and exit.
Also find out while you’re in the bios if the computer ever freezes there.
Pleas respond back with your results at your earliest convenience.
Thank You
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

AT100s Wi-Fi freezes few minutes after booting

The Wi-Fi tick option freezes on "turning off" by its own. Basically its turning off and freezing while Im using the tablet in any way.
Also the hardware buttons like volume +&- arent working and the power button wont work unless I force close the tablet by long pressing it.

In such case I don't think that you can do something to solve this... for me it looks like a serious problem and would recommend visiting the next Toshiba ASP in your country.

Photoshop Elements 12 stops working a few minutes after starting the application

I need technical support for this problem.

This is definitely a Spaces/Mision Control-related issue - I disabled the keyboard shortcuts and the issue goes away. Of course this is not a solution as I need keyboard shortcuts to be productive.
I think it has something to do with the control key being mapped to multiple functions. This issue cropped up for me only after upgrading to Lion. When I upgraded to Lion for some reason the left control key took on the same function as the "Application Windows" function in Mission Control (which is assigned by default to F10). I went into the Keyboard shortcuts settings and can't see where the left control key is being mapped so I can't remove it. I think for me this is the cause of the spaces keyboard shortcut issue - something in the system is grabbing onto the left control key function and fighting with Mission Control when I hit control-1 or control-left to switch desktops. When this happens the keyboard no longer responds to most keypresses and I have to kill the dock to restore functionality.
If anyone else could confirm that their left control key is invoking the "Application Windows" function I think we can narrow down the issue and possible come up with a solution. Please report back and I'll do the same. Also, Apple, please take onus and address this issue as I believe it's not related to third-party software.

Mac Pro freezes at login screen

Mac Pro (2008, dual 2.8GHz quadcore, OS 10.6.8) is set up with
Energy Saver settings: computer sleep 1 hour, screen sleep 5 minutes
Security settings: require password immediately after sleep or screen saver begins
After the computer goes to sleep, upon hitting a key, the login screen appears. However after typing password, there was a message "checking password" and then the computer freezes. I've followed recommendations in Mac Pro Freezing: Checking Password
After the computer goes to sleep, the login screen is frozen. I cannot even enter password. After hard-rebooting it, it appears OK.
Here are the last entries in system.log:
Jan 8 15:21:59 oldmacpro com.apple.backupd[402]: Post-back up thinning complete: 4 expired backups removed
Jan 8 15:22:00 oldmacpro com.apple.backupd[402]: Backup completed successfully.
Jan 8 17:09:27 localhost DirectoryService[11]: Improper shutdown detected
Here are the last entries in kernel.log
Jan 8 15:50:55 oldmacpro kernel[0]: PM notification cancel (pid 47, cupsd)
Jan 8 15:50:55 oldmacpro kernel[0]: IOPMrootDomain: idle cancel
Jan 8 15:56:20 oldmacpro kernel[0]: PM notification cancel (pid 47, cupsd)
Jan 8 15:56:20 oldmacpro kernel[0]: IOPMrootDomain: idle cancel
Jan 8 17:09:27 localhost kernel[0]: npvhash=4095
Question: how can I find out what causes the computer to freeze and how can I fix it ?

I would say yes to the verbose mode and go one further and make it permanent. Coming to OSX from running Tiger on an XPF install on a beige G3 system (totally unsupported by Apple), it was ALWAYS a smart move and even in new machines running hardware they're built to, you can't lose. For the times I do have to reboot, it's good to be able to watch the startup, as you catch immediately if there's a problem with anything. It is verbose after all...
To turn the mode on, you open the Terminal, and at the prompt, type in
*sudo nvram boot-args="-v"* and hit enter. It will nag you about using the terminal (if you haven't done so before) and you enter your password, hit enter again and you're good to go. (if you want to turn it off, type in *sudo nvram boot-args=* and hit enter and your password again)

Mac Pro freezes few minutes after starting download of additional content

Similar Messages

Maybe you are looking for