Mac Pro goes to sleep and wont wake up

Any idea how to stop the Mac from freezing up when it goes into sleep mode?
First the screen saver comes on and then after a way it goes into hibernation and then can't be woken.
It use to wake but suddenly decided not to. Nothing's changed.

Well, as you can see from the long discussion on Creative Cow, the XD Cam issue is complicated and seems to be a hardware issue with Mac Pros. Disconnecting the fibre channel card seemed to have worked for one person. I haven't got one of those as far as I know! But then my crashes aren't as constant as his and seem connected, in my mind, with the odd way FC garbles the aspect ratios of Ex 1 footage, especially if mixed with filters and other codecs on the same time line... but some people swear it's the hardware not the soft that's the problem.
Anyway, I've had the hardware... RAM, Disk issues etc... all triple checked out and can't find a problem.
But still Finder takes six seconds to find anything and I think that has caused some crashes.
It doesn't seem to like Soundtrack Pro at all! (You can find a mixed bag of experiences on that issue as well.) And Motion works a little bit too jittery for my liking.
It might be that there are several different flavours of mother board, some not as geared up to this software as others. That's my theory at the moment. The only way to check is to stick my hard drives into the machine of someone who says they don't have any problems.

Similar Messages

My computer is going to sleep and wont wake up by touching keyboard or mouse. I have to use the power button

Can anybody help? My computer is going to sleep and I cant wake it(bit like a teenager) by using the mouse or keyboard. I have to use the power button. Any ideas?

Hmm, that support link doesn't like me.
Do you have the discs that came with the computer? If so, put Install Disc 1 into the combo drive and boot up while holding the C key. Does anything show up on the screen? Do you hear the fan running? When running from a CD or DVD, the fan usually runs at a fairly fast pace and should make some noise.
Keep in mind that you have a 1-year hardware warranty with any new or refurbished Mac, so if something has gone wrong, you should be able to have it replaced free of charge, unless the MacBook shows some form of damage.
~Lyssa

Macbook Pro Randomly Goes to Sleep and Wont Wake Up

My Macbook Pro started having this problem a few months ago and it has gotten progressivly worse and worse. It will randomly go to sleep but I wont be able to wake it back up. The keys are lit up and the light on the front is pulsing, but no matter what I do it wont wake up. So I have to do a hard reset to turn it back on. This happens a few times a day so its pretty infuriating. I have read on other forums about people having this same problem but havent been able to find a solid solution.
Here is what kind of Macbook I have:
And here is the error report that I get once I restart my computer:
Interval Since Last Panic Report: 31393 sec
Panics Since Last Report:          1
Anonymous UUID:                    2A38817B-6AB8-4315-89C6-23BAD302635F
Thu Oct 25 18:07:56 2012
panic(cpu 3 caller 0xffffff7f80926007): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff809fb4f000 0x0a5480a2, D0, P3/4
Backtrace (CPU 3), Frame : Return Address
0xffffff8076462a00 : 0xffffff8000220792
0xffffff8076462a80 : 0xffffff7f80926007
0xffffff8076462b10 : 0xffffff7f80a1eb83
0xffffff8076462b70 : 0xffffff7f80a1ebf7
0xffffff8076462be0 : 0xffffff7f80d20855
0xffffff8076462d20 : 0xffffff7f80a42ddd
0xffffff8076462d50 : 0xffffff7f8092fd6a
0xffffff8076462e00 : 0xffffff7f8092b43c
0xffffff8076462ff0 : 0xffffff7f8092c668
0xffffff80764630c0 : 0xffffff7f81e52f36
0xffffff8076463200 : 0xffffff7f81e530e9
0xffffff8076463210 : 0xffffff7f81e82fab
0xffffff80764637e0 : 0xffffff7f81e10ef8
0xffffff8076463860 : 0xffffff7f81e13c07
0xffffff80764638a0 : 0xffffff7f81e5cf40
0xffffff80764638f0 : 0xffffff7f81e1133c
0xffffff8076463930 : 0xffffff7f81e070d7
0xffffff8076463aa0 : 0xffffff7f81e4bd6d
0xffffff8076463b60 : 0xffffff7f81e04346
0xffffff8076463bc0 : 0xffffff8000655f3e
0xffffff8076463be0 : 0xffffff800065681a
0xffffff8076463c40 : 0xffffff8000656fbb
0xffffff8076463d80 : 0xffffff80002a3f08
0xffffff8076463e80 : 0xffffff8000223096
0xffffff8076463eb0 : 0xffffff80002148a9
0xffffff8076463f10 : 0xffffff800021bbd8
0xffffff8076463f70 : 0xffffff80002aef10
0xffffff8076463fb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 bf000->0xffffff7f80bbafff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f808ad000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000
         com.apple.nvidia.nv50hal(7.3.2)[38ACBB3D-4E3C-3883-9A4B-67F15592905F]@0xffffff7 f80bbb000->0xffffff7f80eddfff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 bf000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
         com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81df90 00->0xffffff7f81ebbfff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 bf000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f808ad000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 18534465488729
last loaded kext at 5206568982077: com.apple.driver.AppleUSBCDC    4.1.22 (addr 0xffffff7f80795000, size 16384)
last unloaded kext at 5267055475083: com.apple.driver.AppleUSBCDC    4.1.22 (addr 0xffffff7f80795000, size 12288)
loaded kexts:
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AudioAUUC    1.59
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleHDA    2.2.5a5
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMikeyDriver    2.2.5a5
com.apple.driver.AGPM    100.12.75
com.apple.driver.AppleIntelHDGraphics    7.3.2
com.apple.driver.AppleIntelHDGraphicsFB    7.3.2
com.apple.driver.SMCMotionSensor    3.0.2d6
com.apple.driver.AppleSMCPDRC    5.0.0d8
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.GeForce    7.3.2
com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
com.apple.driver.AppleSMCLMU    2.0.1d2
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.3
com.apple.driver.AppleMuxControl    3.1.33
com.apple.driver.ApplePolicyControl    3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.AppleMCCSControl    1.0.33
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleUSBTCButtons    227.6
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.8f17
com.apple.driver.AppleUSBTCKeyboard    227.6
com.apple.driver.AppleUSBCardReader    3.0.6
com.apple.driver.AppleIRController    312
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.iokit.IOAHCIBlockStorage    2.1.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleFWOHCI    4.9.0
com.apple.driver.AirPort.Brcm4331    561.7.22
com.apple.iokit.AppleBCM5701Ethernet    3.2.4b8
com.apple.driver.AppleUSBHub    5.1.0
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleAHCIPort    2.3.1
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleUSBEHCI    5.1.0
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.4
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.DspFuncLib    2.2.5a5
com.apple.iokit.IOSurface    80.0.2
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.iokit.IOAudioFamily    1.8.6fc18
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleHDAController    2.2.5a5
com.apple.iokit.IOHDAFamily    2.2.5a5
com.apple.driver.AppleGraphicsControl    3.1.33
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.nvidia.nv50hal    7.3.2
com.apple.driver.AppleSMC    3.1.3d10
com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
com.apple.driver.IOPlatformPluginFamily    5.1.1d6
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.NVDAResman    7.3.2
com.apple.iokit.IONDRVSupport    2.3.4
com.apple.iokit.IOGraphicsFamily    2.3.4
com.apple.kext.triggers    1.0
com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
com.apple.iokit.IOBluetoothFamily    4.0.8f17
com.apple.driver.AppleUSBMultitouch    230.5
com.apple.iokit.IOSCSIBlockCommandsDevice    3.2.1
com.apple.iokit.IOUSBMassStorageClass    3.0.3
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBMergeNub    5.1.0
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.8
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IOEthernetAVBController    1.0.1b1
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOUSBFamily    5.1.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.8
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4
Unable to gather system configuration information.Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.8 GHz, 4 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500325ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 5
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 6
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3
Can anyone help me? Thanks in advance!

Hey this was happening to me too! So i called apple care, i have a the Late 2011 Macbook Pro, and this is what they suggested:
1. open system preferences
2. open engery saver
3. look at "Computer sleep" and move it over to a longer time period
          for instance I had mine at 5 minutes so thats why it would go to sleep all the time
     -now I set it to 25 minutes
Hope that fixes your problems!

Mac pro goes to sleep and the error log say "The smart launch will be terminated"

Several times in the last few days my Mac Pro early 2008 has locked up. This occures when leave the machine and come back to it. I see the screen is black and the only thing that I see after clicking the mouse and pressing keys on the keyboard, is the white outline of the curser that will move across the screen. Nothing will bring the system back and my only option is to hold down the power button until the unit shuts down.
I checked the logs in the console and the error message that I see is: mm/dd/yy 9:49:17.719 AM SmartLaunch[31448]: The SmartLaunch will be terminated.
Any clue where I should start looking?
Steve Ornat

That is a great idea to check the memory temperture. Do they have built in temperture senors and then is there a terminal command to run to check that? Also how do I change the speed of the fans, again a terminal command?
I was mistaken, I bought 4- 4GB memory modules, with heatsinks. (8GB were tooooo expensive) It should be good memory but certainly I wonder as this never happened before the new memory was added, 5 or 6 weeks ago.
My memory config is:
2 - 1 GB (orginal whe n I got the sytem)
2 - 2 GB added 1 year ago from OWC
4 - 4 GB added 6 weeks ago from ??
Good suggetions about the hard drive. I did add a new Seagate 3TB drive a year ago when I got this machine, and I use it for all my data stoage and tunes and pixs and only use the 250GB dirve of OS and apps. I have not installed the OS and apps on the 3TB drive and that would be an easy thing to do.

Macbook pro goes to sleep doesn't wake up...noticed the light on the power cord not on...

My MacBook Pro goes to sleep and this time will not wake up. I hold the start button down for count of 10 without results. I noticed the light on my power cord isn't on...and I've jiggled the cord and plugged it into a working outlet. Help!

All Apple laptops will go to sleep when the battery gets low, during this sleep you will not be able to wake it up. based on what you are saying, to me it sounds like the battery is low because your power supply failed. I would recommend either barrowing power supply from a friend, or bring it to the apple store, that way you can test it with a good power supply, it that is the case, replace it.

MDD went to sleep and wont wake up!

twin g4 867 MDD went to sleep at its scheduled time (2AM) The next day it would not wake from sleep as far as i could tell. Unplugged it, plugged it back in and i get startup tones but no video feed. HD's and fans are spinning. anyone have any ideas? Monitor burnout? graphics card? (i have a a nvidia gforce ti) im running tiger with all the updates, and an apple 20in cinema display. THANKS!!!

Are you able to bootup on your install disk?
Try using Disk Utility to repair your startup disk (hard drive) as shown in Dr.Smokes Resolving Disk, Permission, and Cache Corruption.
If it's a no wake from sleep issue, read on;
If your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following lines:
reset-nvram
press Return on keyboard
set-defaults
press Return
reset-all
press Return
Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
Still did'nt work? Might be time to call AppleCare or see an Apple Genius or a technician.
Cheers!
DALE

MBP goes to sleep and only wakes up for a moment... then sleeps?

My MBP started doing this today. Open the display, it wakes up for 1 second, then it goes to sleep and the screen disappears...? I tried to reboot in safe mode but it does the same thing again. Cant get it to stay on for more than a moment... any tips?

What new features are you mentioning, specifically?
The bulk of advancements w/SL are under the hood it would seem.

Macbook Pro 15 inch goes to sleep and then wakes

The Macbook Pro 15 inch computer is going to sleep while in use and then wakes up. No magnetic items are close to it. It is the strangest thing. We will be using it then its screen goes black/to sleep and wakes up after a few seconds. I thought that maybe it was Opera that I had open so I shut that down. I opened and was using Safari then it repeated. I tried restarting but it made no difference. Any thoughts on this or ideas of how to fix this?

I would try a SMC reset.
DALE

Thunderbolt Display in Bootcamp: Wont 'wake' after comp goes to sleep, and wont respond to dim controls.

Hi, I am using a 2011 iMac and my thunderbolt display arrived today.
I use bootcamp (win7) and the display works fine on start up, 2 issues though:
1. Keyboard brightness controls affect the main display but do not not change the thunderbolt display.
2. After the computer goes to sleep, apon waking the thunderbolt display stays off.
Any advice would be appreciated.
Cheers!
Sam

I have no idea about changing from Helpful to Correct. (but feel free to mark this one as correct).
Fixed in the next update in what way? So that the brightness buttons control both at the same time? Don't hold your breath waiting for it. This has been an issue with all the displays for a long time and I doubt this will happen. The problem is that the screens can get out of sync (like if you enable the option to automatically adjust based on the room brightness) so that the brightness wouldn't be the same between them. Who know, perhaps they will come up with this fix and allow them to sync properly.
I don't know of a Windows program but on OSX, I use ControllerMate to do this for me. CM allows you to customize all your buttons to do different (or additional) things. In my situation, I have the external keyboard attached to a 27" Cinema Display. When I press the brightness keys on the external, OSX detects the keys and adjusts only the CD brightness. However, CM is also monitoring the keys and when I use them, it emulates the same brightness keys being pressed on the laptop keyboard. This allows me to control the brightness on both at the same time. If needed, I can press the brightness keys on the laptop and adjust that screen seperately because I haven't programmed CM to monitor those keys.

My MacPro goes to sleep and never wakes up

Pretty much every time I leave my computer alone for the night, I have to do a hard reset in order to get back in... it never wakes back up when I press keys or click the mouse. While I'm using it, it runs amazingly well.
This is a 2006 Mac Pro, in which I have stuffed a lot of solid componentry. Recently I made two changes:
1. I plugged a third monitor into one of my two video cards.
2. I threw in 16gb of RAM that I grabbed from Ebay.
TechTools pro runs tests and tells me that everything is fine... obviously it's wrong.
I bought the computer off of craigslist, and it boots to a black screen with a bunch of white text... I don't know why. I can't boot into Apple Hardware Test... I really can't boot into any of the recovery modes actually. I'm stuck going directly into the operating system after the black screen does it's thing.
I would try to reset the PRAM and such, but holding things down during startup just doesn't work for me.
Here's the error report... it also includes a lot of the information about the hardware in the computer (thanks in advance for all of your help):
Interval Since Last Panic Report: 4932030 sec
Panics Since Last Report:          5
Anonymous UUID:                    8A8EC18A-6F61-45EC-8FFC-86A830859C01
Tue Dec 10 13:28:16 2013
Machine-check capabilities (cpu 7) 0x0000000000000806:
family: 6 model: 15 stepping: 11 microcode: 0
Intel(R) Xeon(R) CPU           X5365 @ 3.00GHz
6 error-reporting banks
threshold-based error status present
Machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x1000000020000000 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0020000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000011 invalid
IA32_MC5_STATUS(0x415): 0xb200000080200e0f valid
MCA error code:            0x0e0f
Model specific error code: 0x8020
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   Error enabled
   Uncorrected error
panic(cpu 7 caller 0x2cf3cc): "Machine Check at 0x01d83f68, trapno:0x12, err:0x0," "registers:\n" "CR0: 0x80010033, CR2: 0x8711a000, CR3: 0x00100000, CR4: 0x00000660\n" "EAX: 0x00000000, EBX: 0x14d31800, ECX: 0x00000001, EDX: 0x00000000\n" "ESP: 0x833f3c10, EBP: 0x833f3c48, ESI: 0x00000000, EDI: 0x00000108\n" "EFL: 0x00000046, EIP: 0x01d83f68\n"@/SourceCache/xnu/xnu-1699.32.7/osfmk/i386/trap_native.c:258
Backtrace (CPU 7), Frame : Return Address (4 potential args on stack)
0x83502f38 : 0x2203de (0x6b08cc 0x83502f58 0x229fb0 0x0)
0x83502f68 : 0x2cf3cc (0x6bde94 0x6bdfc8 0x1d83f68 0x12)
0x835030d8 : 0x2cf409 (0x83503110 0xde 0x6bdfc8 0x1)
0x835030f8 : 0x2e6182 (0x83503110 0x0 0x0 0x0)
0x833f3c48 : 0x1d7b9df (0x834fc100 0x1 0x14d31800 0x0)
0x833f3ce8 : 0x1d7dc73 (0xffffffff 0x7fffffff 0x0 0x0)
0x833f3d78 : 0x2d0cde (0xffffffff 0x7fffffff 0x833f3d98 0x2cd4ca)
0x833f3d98 : 0x22d3e5 (0x8352a000 0x858b1232 0x4988 0x8352ade0)
0x833f3dd8 : 0x22e1c0 (0x189603f8 0x8352a000 0x0 0x0)
0x833f3e28 : 0x22f6c2 (0x18960414 0x2 0x12 0x18a76300)
0x833f3e88 : 0x22f821 (0x2150f0 0x0 0x0 0x189603f8)
0x833f3ea8 : 0x21505d (0x2150f0 0x7000006 0xc00 0xffffffff)
0x833f3ed8 : 0x21b385 (0x1860e240 0x7000006 0xc00 0xffffffff)
0x833f3f28 : 0x2b7e16 (0x833f3f50 0x0 0x833f3f9c 0x1c)
0x833f3fc8 : 0x2e5bb7 (0x18358cd0 0x0 0x10 0x16fa5f50)
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelCPUPowerManagement(195.0)[D1550426-D346-4805-A777-06 63C69080DA]@0x1d79000->0x1da2fff
BSD process name corresponding to current thread: Final Cut Pro
Boot args: -v
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:26:45 PDT 2012; root:xnu-1699.32.7~1/RELEASE_I386
Kernel UUID: 859B45FB-14BB-35ED-B823-08393C63E13B
System model name: MacPro1,1 (Mac-F4208DC8)
System uptime in nanoseconds: 80851182634766
last loaded kext at 2359082118391: com.apple.driver.AppleFireWireStorage    3.0.6 (addr 0x10b9000, size 16384)
last unloaded kext at 2474279225436: com.apple.driver.StorageLynx    3.0.6 (addr 0xdbe000, size 12288)
loaded kexts:
com.techsmith.TACC    1.0.2
at.obdev.nke.LittleSnitch    4050
com.apple.filesystems.exfat    1.1
com.apple.driver.AppleBluetoothMultitouch    70.12
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AppleHDA    2.2.5a5
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMCCSControl    1.0.33
com.apple.driver.AudioAUUC    1.59
com.apple.kext.ATIFramebuffer    7.3.2
com.apple.ATIRadeonX1000    7.0.4
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
com.apple.driver.AppleMCEDriver    1.1.9
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.3
com.apple.driver.ApplePolicyControl    3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
com.apple.driver.AppleLPC    1.6.0
com.apple.ATIRadeonX3000    7.3.2
com.apple.driver.CSRUSBBluetoothHCIController    4.0.8f17
com.apple.driver.Oxford_Semi    3.0.6
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.driver.XsanFilter    404
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.IOAHCIBlockStorage    2.1.0
com.apple.driver.AppleFWOHCI    4.9.0
com.apple.driver.AppleAHCIPort    2.3.1
com.apple.driver.AppleIntelPIIXATA    2.5.1
com.apple.driver.AppleUSBHub    5.1.0
com.apple.driver.AppleIntel8254XEthernet    2.1.3b1
com.apple.driver.AppleUSBEHCI    5.1.0
com.apple.driver.AppleUSBUHCI    5.1.0
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.4
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.AppleMultitouchDriver    231.4
com.apple.driver.IOBluetoothHIDDriver    4.0.8f17
com.apple.kext.triggers    1.0
com.apple.driver.DspFuncLib    2.2.5a5
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.kext.ATI1900Controller    7.3.2
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.driver.AppleUSBAudio    2.9.0f5
com.apple.iokit.IOSurface    80.0.2
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.driver.AppleHDAController    2.2.5a5
com.apple.iokit.IOHDAFamily    2.2.5a5
com.apple.iokit.IOAudioFamily    1.8.6fc18
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleGraphicsControl    3.1.33
com.apple.driver.AppleSMC    3.1.3d10
com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
com.apple.driver.IOPlatformPluginFamily    5.1.1d6
com.apple.iokit.IONDRVSupport    2.3.4
com.apple.kext.ATI5000Controller    7.3.2
com.apple.kext.ATISupport    7.3.2
com.apple.iokit.IOGraphicsFamily    2.3.4
com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
com.apple.iokit.IOBluetoothFamily    4.0.8f17
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.iokit.IOUSBMassStorageClass    3.0.3
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.2.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport    2.1.0
com.apple.iokit.IOFireWireSBP2    4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOATAPIProtocolTransport    3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.8
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOATAFamily    2.5.1
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBFamily    5.1.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.11
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4
Model: MacPro1,1, BootROM MP11.005C.B08, 8 processors, 3 GHz, 16 GB, SMC 1.7f10
Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
Memory Module: DIMM Riser A/DIMM 2, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
Memory Module: DIMM Riser B/DIMM 3, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
Memory Module: DIMM Riser B/DIMM 4, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1
PCI Card: ATI Radeon HD 5770, ATY,VervetParent, Slot-1
PCI Card: ATY,RadeonX1900, sppci_displaycontroller, Slot-3
Serial ATA Device: WDC WD3200AAKS-00L9A0, 320.07 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: Cardette 3 USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0612, 0xfd100000 / 2
USB Device: Cardette 3 USB3.0 Card Reader, 0x0bda (Realtek Semiconductor Corp.), 0x0301, 0xfd130000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
USB Device: iMic USB audio system, 0x077d, 0x07af, 0x1d200000 / 2
USB Device: Back-UPS RS 1000G FW:869.L3 .D USB FW:L3, 0x051d (American Power Conversion), 0x0002, 0x3d200000 / 3
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52b, 0x3d100000 / 2
FireWire Device: built-in_hub, 800mbit_speed
FireWire Device: G-SPEED Q RAID5, 0x1B8C, 800mbit_speed
FireWire Device: unknown_device, unknown_speed

Just junk the X1900 for now. At least take it out, take it outside and give it the full treatment.
X1900
http://www.xlr8yourmac.com/Graphics/X1900XT_Overheating/ATI_X1900_artifacts.html
http://www.xlr8yourmac.com/Graphics/radeon_X1900XT/X1900XT_dust_buildup.html#sto rytop
Try with half the RAM at a time.
Monitor the temps - Temperature Monitor - especially those FBDIMMs to be running below 70*C.
Amazon has those for $25 (2 x 2GB for Mac Pro 1,1 667)
Your 5770 will support three displays.
Use SMCFanControl 2.4+ and set the default fan speed to 900 rpm, and set a couple more profiles for higher rpm just to see if that helps air flow and cooling and if your temps are normal.
I would also look at running w/o external devices. Like your RAID5. Until your system is stable.

She goes to sleep and never wakes up - among other things

I just installed SL and I seem to be having a myriad of problems:
1) when she goes into sleep mode, i can't wake her up unless I restart the machine. All I get is the spinning beach ball.
2) she is definitively NOT faster
3) I don't see anything new or different anywhere on my system. I was really excited about the new podcast feature but I can't find it anywhere on my system
4) I ran disk utility to do repair permissions, and that didn't fix anything. In fact, a few repairs couldn't be made.
I'm thinking that i should just just uninstall it - but i have no idea how to do that. Should I try to fix it or just I just do the uninstall and wait until the software updates come out?
Thanks for any input!

What new features are you mentioning, specifically?
The bulk of advancements w/SL are under the hood it would seem.

Mac air goes into sleep won't wake

MacBook Air goes to sleep as normal, but won't wake up now.

A new mini is on the way & I'm researching UPS's. A question that I now have is -
The new mini will have 10.5 which will be nice, but I really want to put my old hard drive straight into the new unit so I can have my old computer back the way I like it. Right now I have my external drive with everything on it plugged into my wifes macbook, & I can access everything except my email. The old emails are there in the folders, but as numbered icons, & I can't find anything. With my business I often have to refer back to old emails, & right now it's really hard to. I have tried to import them into mail, but it says it doesn't recognize them.
If I do this, can I put the new backup discs in & load leopard onto the old hard drive without loosing my old information & setup? We are on a very slow dial-up here, so I've never been able to accept the automatic updates. I look forward your advice.

Mac Pro won't start and display has no signal?

My Mac Pro goes to sleep and won't start. The display doesn't have a signal. What is wrong?

After a few hours of trying to work things out...I've discovered its related to the ATI Radeon 2600 HD XT Card (dual cards and monitors). Once I remove one card from each machine the systems started but the monitors remained in what looks like suspended mode display "No signal".
Tried to download firmware update. My system wouldn't allow the installer to work. Apparently already have the firmware.
The Display icon shows only four choices for the monitors resolution. On my working systems there are at least 15 resolution settings. Where is the ATI Radeon software on the system. The About this Mac doesn't show any Graphics or Display information.

Lose printer after macbook pro goes to sleep

I have a wireless printer (Samsung CLX-3185FW) that I talk to through my time capsule/ariport.
After my computer (or any of the ones on the network) go to sleep, it can no longer see the wireless printer. The happens whether the printer is in active/ready mode, or is asleep.
After the computer goes to sleep (and I wake it again, and it is connected to the wireless network), I can't print, wake the printer from sleep, or re-add the printer through preferences.
If I restart the printer, the computer can see it again.
There is no problem if using USB.
Given the printer is still connected to the airport, I am presuming it is a problem with some settings on my computer or time capsule.
Any ideas would be greatly appreciated!

itrina wrote:
I have a wireless printer (Samsung CLX-3185FW) that I talk to through my time capsule/ariport.
After my computer (or any of the ones on the network) go to sleep, it can no longer see the wireless printer. The happens whether the printer is in active/ready mode, or is asleep.
After the computer goes to sleep (and I wake it again, and it is connected to the wireless network), I can't print, wake the printer from sleep, or re-add the printer through preferences.
If I restart the printer, the computer can see it again.
There is no problem if using USB.
Given the printer is still connected to the airport, I am presuming it is a problem with some settings on my computer or time capsule.
Any ideas would be greatly appreciated!
Just to confirm.. you can open the airport utilty.. can you still see the TC/airport? And the printer is still there?
Can you find the IP of the printer from the TC/airport? Wireless clients will be listed on the advanced log wireless clients page. Make sure the TC can still see it.
From the computer open a terminal and ping the printer name.. (this is where the problem is I think the computer has lost the printer name from the arp table). If the ping fails to respond, ping by the ip address. See if that gets things going. Tell me your results.
Also when you restart the printer.. and can print, in the terminal type arp -a and copy the output.. the printer should be identified on the network..
After a computer goes to sleep and wakes.. cannot find the printer.. type arp -a again in the terminal and see if the reference to the printer has gone.
Tell me your results.

When I close the lid on my retina MacBook Pro with Thunderbolt and it goes to sleep, I cannot wake it without shutting it down and restarting it. Called Apple tech and they did not have a solution. Any ideas?

When I close the lid on my retina MacBook Pro with Thunderbolt and it goes to sleep, I cannot wake it without shutting it down and restarting it. Called Apple tech and they did not have a solution. Any ideas?

Try these places:
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Help
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
TimeMachine 101
https://support.apple.com/kb/HT1427
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
Recovery Mode
http://support.apple.com/kb/HT4718

Mac Pro goes to sleep and wont wake up

Similar Messages

Maybe you are looking for