Mac Pro Hard Drive Connectors

I need to replace the two screws that hold the hard drive connectors to the Mac Pro.
Does anyone know where I can begin to find these? They are two small black screws.
The previous owner of my Mac Pro removed them so that he could attach an SSD drive loosely to the Mac Pro.
I'm going to replace the SSD drive, as it failed, and it comes with a 3.5" tray that should attach to the Mac Pro hard drive carrier, but when I push it back in to align up with the hard drive connector, since he removed the screws, it doesn't align up and go in without me manually connecting it. I'd like to get it back to the way it was with the screws.
So...I wonder what part number that is or how I can get those two little screws, the exact ones?
Any advice would be great.
Thanks.

ChrisMc73 wrote:
Yeah there are two models for this Icy Dock SSD Kit...I think I want the screwless version.
MB882SP-1S-2B - uses screws to mount the drive and has more ventilation for a moving parts 2.5" drive
MB882SP-1S-1B - is screwless and is meant more for SSD drives
I use the screwless version.
As for dvwearhouse and others, unless you know the part number, how do you know where to look?

Similar Messages

Where can I find Mac Pro Hard Drive Holder?

Where can I find Mac Pro Hard Drive Holder? Only 4 came withe the computer and I need some more.
Anybody knows where I could buy some?
Thanks

http://www.transintl.com/store/category.cfm?Category=2705

Why my Mac Pro hard drive noise and too slow?

Why my Mac Pro hard drive noise and too slow? Totally 8 gb speed system but now very slow . Please give some suggestions

Another thing you can do in Lion (and ML) is click on the "Info" button in Disk Utility to get the SMART status of the drive.It's more detailed now than it used to be and it might tell you if something is wrong.
A lot can go wrong with a hard drive which is why I tend to point people to the downloads section of the following web site:
http://scsc-online.com
They have a free hard drive troublleshooting download book there. I reccommend people download that before asking questionis because there are tons of problems that can act like hard drive problems when there's nothing wrong with the system at all. For example, how full is the drive? How many applications are running? What's the status of Spotlight indexing? How many apps are you running? How much memory do you have?
I could probably think up 20 or 30 more if needed.

Help or tips on config new Mac Pro hard drives

Been saving for over a year and just bought a new Mac pro. The day after MacWorld with no upgrade announced ☹.
My configuration is the 2x 2.8Gh quad-core processors, 2 GB of RAM, ATI Graphic card (standard), and a 1TB hard drive in the first hard drive bay.
I am upgrading for the original 1 processor G5 (sounds so slow now). I am planning on taking my 1TB hard drive from that machine which contains my entire iTunes library, and its full! Mostly of legally ripped DVDs and TV shows.
I am planning on configuring my hard drives like so.
Drive Bay 1: 1TB drive, I am considering partition it so there are about 400 gigs on a boot drive for applications and libraries and using the other 400 or so gigs left over as a drop box for things from my over full iTunes hard drive. (TV shows which have ended, so the tags won’t be changed)
Drive Bay 2: 1TB, or 500 gigs depending on the price I get for a hard drive. If it’s a 1TB I will just have it mirror the drive in bay 1. If its 500 gigs, I will have the iTunes “drop box” mirrored in drive 2 and use my time capsule to back up the OS, applications and libraries.
Drive 3 will be my currently full TB hard drive from my current machine and drive 4 will be a TB drive as an exact mirror for back up purposes.
Can I set up these mirrors I want with time machine? Also I have never partitioned a drive, I know you can do it in disk utility, is it a pretty self-explanatory process?
Is this set up of drives a good idea? A RAID seems too costly and just too much since I am not worried about response times of the drives, as long as my media plays properly I am generally happy. I do some work in PS and FCE but not enough to warrant percent scratch disks and RAIDed drives. I also read about a back up program called SuperDuper but it seems like time machine can do anything I would need super duper to do so is it worth the 30 bucks.
Also I have never used migration assistant, is that fairly painless or am I better off just syncing what I can with Mobile Me, and brining the rest of the things I need over VIA external hard drive? (Documents and pictures and such)
I haven’t gotten a new Mac in 5 years so are there any other tips you recommend when setting up my OS? I read somewhere to create an Admin profile that you never use for log in, and than your own profile? Just simple things like that. I have been browsing my old Macworld magazines looking for small tips!
Well thank you for reading my long post! I am super excited about this Mac to ship in 2-4 days I even shelled out for next day shipping so I didn’t have to want any longer than I needed to.
Thanks in advance.

I've had my MP just a few months, and like you I've filled the drive bays in no time.
I keep on top of things using two pieces of software;
CarbonCopyCloner - this runs two nightly 'incremental' bootable Clones of my OSX/iTunes/iPhoto 'System' HD, one to an internal drive, one to an external FW800 D2.
ChronoSync - This I use for everything else, work in progress & archives etc - During and towards the end of my jobs (I'm a photographer), I will use ChronoSync to perform perfectly synced Backups to external FW800 D2s and will soon be purchasing a NewerTech Voyager Q to facilitate the use of bare HDs for rotational backups.
Time Machine isn't a program I've looked into and frankly the way I work doesn't really require that 'Archive' backup style.

Inserted my Mac Pro hard drives into a RAID enclosure accidentally... help!

Hi guys,
I am regular member of the Logic Pro forum, but am hoping for some help regarding a fairly large data loss disaster.
I have recently sold my Mac Pro tower, in favour of a new iMac, and prior to selling I removed my two additional audio hard drives from the Mac Pro. Unfortunately these were only backed up a year ago (and now my slackness has come back to bite me!), and since then a fair bit of audio work has been completed in Logic Pro.
My plan was to access the hard drives' content on my iMac using a dual-HD USB3 hard drive enclosure. I purchased the ORICO 3529 NAS series, which, while having RAID functionality, I also understood could be used simply as a dual drive unit for normal access of two drives.
So when I got the ORICO unit, I put my two audio drives into it, and plugged into the iMac. I expected to see my drives, but instead I got the message "The disk you inserted was not readable by this computer". I had switched the ORICO to JBOD mode, but possibly not prior to initially powering up the unit - which it appears defaults to RAID mode.
I have since tried the HDs in another single enclosure, as well as putting them in a friend's Mac Pro, and in both cases each disk brings up the same error.
It appears I have somehow formatted these drives to be part of a RAID setup, just by putting them in the RAID unit. I am not sure whether this means that all my data is lost, or whether instead it means that the directory or some other part of the file structure or format have been damaged and need to be re-built. While I am a competent computer user in a music context (using Pro Tools and Logic Pro), I am by no means a programmer, and am not really sure where to go from here.
Two of the very helpful regulars on the Logic Pro forum have advised me that potentially a tool like DiskWarrior might help recover the data, although as we went through some additional troubleshooting, they have since suggested that DiskWarrior may not be the solution, and instead I should talk to a RAID specialist about how to recover some of the data on these disks.
So on that note I thought I would put it out here for any Mac users who might be experienced with RAID and willing to make any recommendations. In the meantime I am not going to try to use any tools (like DiskWarrior) in case they cause more harm when in fact I should be seeking out a RAID expert to work on the solution with me.
If you have any thoughts or have had an experience similar (if you are as silly as me!), I would be grateful for any suggestions you might be able to offer.
Cheers and thanks!
Mike

Also, first thing is don't touch change or modify. Disconnect and get them off line.
The first program that can probably help, http://www.SoftRAID.com - their demo (the support they give is probably worth the cost too). Alsoft Disk Warrior support - even remote login - also can be excellent if or when needed.
SoftRAID 'takes over" the Apple RAID and can do wonders.
What you have is an external device with its own built-in bridge and probably a switch (mirror, stripe, JBOD, None).
You need to get them in a case that has no built in bridge or RAID of its own. A Mac Pro would be excellent.
See what OWC has in external cases. http://www.macsales.com/firewire ( a good place to start looking at any type of external interface for storage)

How can I back up a MacBook Air on a Mac Pro Hard Drive using Time Machine?

Want to back up a MacBook Air on a Mac Pro with a spare hard drive. Sharing allows Time Machine to find the hard drive, but get a drive busy message when time machine tries to back up onto the drive.
Any suggestions?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to a failed backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Erasing and reinstalling my mac pro hard drive

I have an older Mac Pro (2006 I think).
I want to erase and reinstall the hard drive. Once the disk is clean, is there a way to install OS directly to mountain lion? Or will I have to install from an ealier complete set of physical disks?

If it shipped with 10.4 and is a 2007 or earlier Mountain Lion is not supported, only up to Lion.
You download and save the Lion installer first and would need to have 10.6.8 to access the App Store.
Leave what you have as is, and just install a new system to another of the drive bays.

MAC PRO HARD DRIVE won't boot

HARD DRIVE won't boot past APPLE ICON, grey spinning wheel on grey screen. Tried using install discs, no go past the icon.
Replace small battery inside? replace chips? Logic board replace as last resort. Can't take it away from work at this point to an apple tech.
Had just installed updates to snow leopard and was successful...but went to restart it...and this crap happened.
Thanks for any help.
MT1111
< Edited by Host >

I'll try that tomorrow. Thinking it could also be:
1) The PRAMM battery. found info on that they can wear out close to 5 years. This MAC PRO is close to that now. And I use a lot of power on it.
2) MAC PRO is plugged into a SURGE PROTECTOR, instead of right into the wall outlet.
3) Been doing a lot of FORCE QUITS and HARD BOOT -- unplugging it directly when it wouldn't shut down soon enough -- lately this past year.
I just assumed that this MAC PRO with the XEON QUAD CORE etc., was a heavy duty enough NLE,
that i wouldn't have these problems. It's not fully loaded with all the chips it can carry...and I don't have near enough external terabyte hard drives for storing video and audio files to edit. I've been storing wayyy too much
on the internal hard dives and just have to stop that.
I noticed these past few days that much of the LETTERING for hard drive icons and folders' titles
were starting to look in OVERLAPPING of the lettering. That was my first hint that something was up.

Mac Pro hard drive failure how to recover data

I have a 2007 Mac Pro with four hard drives in it. One of my drives had a message the other day indicating I/0 error, it came back several times, and now I don't see the hard drive on my desktop.
Is there a way I can recover the data from this drive?

ALSOFT DISK WARRIOR - their techs have helped even where a drive was unable to mount.
a disk to disk sector copy can be of use $500 range
"Disk drive recovery" is always a hot topic on http://www.macintouch.com
At leas DR3 is demo to see if it can find files.
SoftRAID http://www.softriad.com can often take over and provide the ability - email their support, the have a demo, program is about $140

Mac Pro Hard Drive Problems

Okay heres my problem-
The other day I started up my mac pro and got the blinking folder with the question mark on it. After about an hour of resetting the PRAM, and booting up several times from the Mac OS X disk and running the disk utility only to find my boot drive not there, I gave up. The next day I started up my Mac from the CD and ran the disk utility and my hard drive was there! I verified the disk and the hard drive is working normally, but I will still only be able to boot onto it about 50% of the time. Any suggestions?

Just want to make sure this is correct:
When I run Disk Utility it shows my boot drive as:
Mount Point: /.
Format: Mac OS Extended (Journaled)
The reason I ask this is because my second hard drive shows the mount point as /Volumes/Video so I don't know which is the correct one.

Mac Pro Hard Drive Setup

Hi,
I am waiting delivery of a mac pro dual quad 2.8 and I am getting a 500GB option in bay 1
I am ordering 2 x Samsung (finger crossed) F1 1TB drives (Bay 2 and Bay 3).
My main use will be for producing music which will therefore run plug-ins instruments, effects, work with audio files...
*Would a setup like this be ok?*
*_Setup A_*
500GB Drive 1 = System and other applications (e.g. Logic Pro, virtual insrtuments, other apps)
1TB Drive 2 = Audio library (Samples, sounds from virtual instruments many GBs large, etc... )
1TB Drive 2 = all sort of stuff from scratch disk to personal family files like photos, movies, music, etc...)
Will then use external Hard Drive to back up stuff I don't want to lose
*_Setup B_*
500GB Drive 1 = System (too large for just system)
1TB Drive 2 = Applications
1TB Drive 3 = Data (audio files, audio library, personal photos-movies-music, etc...)
*_Other option?_*
If I want to have a dual but with Windows XP... will I be able to just add another Drive (Internal/External) for a d*ual boot start up?*
Thanks for any help
Message was edited by: TC_MACPRO
Message was edited by: TC_MACPRO

Either configuration should work fine. It's really entirely up to you. However, I note in your proposed configuration that there's no provision for backups. Since your work is obviously valuable to you, then you need a backup plan. Unfortunately, given what you will have there's only room for one more drive which can have a maximum size of 1.5 TBs. Not large enough to back up 2.5 TBs of extant capacity. I suggest you give some thought to the backup plan. You could use external Firewire drives for backup. Or you could make use of the two additional SATA drives that can be installed outside of the four existing bays. Unfortunately, there's not much room in the Mac Pro to install the drives internally.
Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.
Although you can buy a complete FireWire drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.

Mac Pro Hard Drive Setup Question

Mr. FedEx brought me my Mac Pro today and I'm getting ready to set it up. I'm migrating from a PowerBook G4 17 inch and got the Mac Pro 3.0 GHz, 8 GB RAM, and four 500 GB hard drives. I figure I should do a freash install of Aperture instead of using the Migration Wizard. The question for the night is, how should I handle the four hard drives? Out of the box I see four seperate hard drives labled Macintosh HD. For Aperture, should I use software raid across all four drives or only three leaving the OS drive by itselft for applications?
Mac Pro Mac OS X (10.4.7)

Sure you can... I got a Raid 0 on two 300Gb drives on my boot drive... They host the OS and my apps.
The trick is that its got to be a fresh install. You boot with your hardware giag disk and in the menu you have the disk utility. Create the RAID setup and then quit. You can now boot the disk with the OS install and it will recognize it as such.
Now - a few things to consider. Next version of OS X has Time Machine that that expects a volume (a disk, the whole disk) for it to work. So it would be cool if you find out about it and sort of prepare for it.
Having said that I would Raid0 two pairs and Raid1 the two. This is called Raid 1+0 or Raid 10. Its a good compromise but if drive 1 AND 3 fail then there is no backup. I would also get an external firewire disk (say 300Gb or 500Gb) and use it as a vault. But that is because I can't think of running the machine with a full backup of what I got, still not a perfect solution.
The way I got it is using Raid 0 on my OS and Apps (600Gb) with an external Firewire disk for backup. (no Raid 0 - so there is no statistical odds to beat)
Apeture has two drives. Two Firewire 800 (1Tb) drives, one the library and the other is the vault. The vault also stores the deleted images, so you will have to clean every now and then or it will grow faster than your library.
http://www.terraoptica.com

The manufacturer that creates the Mac Pro hard drive enclosure

I want to purchase another hard drive enclosure and I know there are a few companies that manufacture drives resembling the Mac Pro. Rosewell and Coolgear...but which one does the massive storage version with 5 drives on RAID with option of firewire 800 or SATA output? Its almost half the size of the Mac Pro.
I've been googling this one for awhile and I remember seeing it somewhere.

Hi Erik,
Here they are from Gtech called Gspeed:
http://www.g-technology.com/Products/G-SPEED.cfm
I saw one at buffalo sites, it comes with 4 drive enclosure.
But it doesn't look like macpro shape at all.
http://www.buffalotech.com/products/external-drives/drivestation/
Good Luck

Cloning Mac Pro Hard Drive

I bought 4 1tb hard drives for my 1st gen mac pro. I've already installed and formatted my 3rd and 4th drives. I'd like to take my remaining 2 1tb drives and use them in the first 2 slots on the mac pro. What would be the best way to clone my main macintosh hd to my new 1tb drive? Should I install leopard on the drive first and then install it in the mac pro? How can I go about doing this?

Yup. But I read that you wanted to do two drive swap, and sounded like clone to (? external) and then move it physically. And install OS X as another option.
So for me the explanation had me confused.
I will say that having multiple backups, clone your system, and make sure it is bootable and works should be 101 and done any time before doing any installs and updates.
YOU DO NOT NEED TO MOVE TO A SLOT. It doesn't boot based on slot, but based on drive ID and name. And you have to use Startup Disk to set the default.
Nice thing about SuperDuper, the pdf is worth reading.
And it is free to do a full drive copy. Smart copy update is when you need to buy it. And $29 I would.

New Mac Pro Hard Drive Question

So I think I understand this whole external parts thing with the Mac Pro. But I do have one question I want to make sure I am not making a mistake on. I got an external hard drive for my Mac Pro using USB 3.0. My thinking was a mechanical hard drive can only transfer data at a certain speed and it appeared that no matter which I picked Thunderbolt ($200) or USB 3.0 ($100) the transfer rate of the data was the same. If buying a SSD I could understand buying thunderbolt but for your typical external 7200 RPM hard drive isn't 3.0 all you need? Am I missing something here, i.e. why would someone pay an extra $100 for a thunderbolt external hard drive that is mechanical and 7200 RPM?

Linc Davis is quite right.
But be careful not to generalize that too much. The new cylinder Mac Pro has enough USB bandwidth available to run one USB-3 both directions at once, full tilt. So when you get more than a handful of USB drives or intend to use it for production at high throughput, it may start to slow down.

Mac Pro Hard Drive Connectors

Similar Messages

Maybe you are looking for