Mac Pro in Desk will it get too hot?

Hi I'll be receiving my Mac Pro on the 27th of March. I will be placing it inside my desk (not by choice as I have no other place to put it) It's surrounded on all three sides, there's no door, the front is completely open, Would it get too hot for my Mac Pro? Would it be best to cut an opening in the back of the desk behind the computer? Thanks

Would the computer be ok if I plugged in an external usb powered fan and have it blow the heat out?
Would something like this do the trick?
http://www.amazon.com/exec/obidos/tg/detail/-/B00080G0BK/ref=ordcart_shr?encoding=UTF8&m=A2YLYLTN75J8LR&v=glance

Similar Messages

  • Macbook pro retina display 15" charger getting too hot... any advice?

    I have had my Macbook pro retina 15" since Jan 2014 and it has been working fine. Just recently, I have noticed that the charger block and the connector to the laptop gets extremely hot as does the actual laptop. I have looked around on the net and most of the discussions regarding this have been on earlier models. The charger block itself is so hot that it emanates heat and is too hot to touch! The plug into the laptop is pretty darn hot as well. When charging, I can't keep the macbook on my lap because it gets too hot.
    I have checked all the connectors and the connections of all bits involved and they all seem good. I have also tried to minimalise all programs that are running.
    Just wondering if someone can suggest anything, otherwise it looks like a trip to the store
    Many thanks in advance

    Bfore you run to the store try this SMC ret, it fixes
    Battery management
    Thermal management

  • I have an app that i want to download on my mac pro.  it will not let me because it was not approved.  i know the app is ok.  how do i get it downloaded?

    i have an app that i want to download on my mac pro.  it will not let me because it was not approved.  i know the app is ok.  how do i get it downloaded?

    What are you referring with not approved? What happens when you try to download it? If you see an error, copy it here. At first, I suspect that Gatekeeper may be the reason why you can't install that app > http://support.apple.com/kb/HT5290?viewlocale=en_US&locale=en_US

  • Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D

    Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D
    Hi, I'm using the new Mac Pro
    2.7 GHz 12-core Intel Xeon E5
    64 GB 1867 MHz DDR3
    AMD FirePro D700 6144 MB
    OSX 10.9.2
    I'm using After Effects 12.2.1.5
    When I attempt to invoke the race trace 3D renderer in a comp, I get this error
    "After Effects Error: Ray-traced 3D: Out of paged mapped memory for ray tracer. Your project may exceed GPU limits. Try closing other applications. Try updating the CUDA driver. (5070::2)"
    My preferences are set to use the CPU for Raytraced 3D since I do not have an Nvidia card.
    So, obviously there is an issue here in that it thinks I have an Nvidia card.
    I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
    So my question is, what files can I delete/reset to cause After Effects to no longer look for CUDA files that do not exist on this machine?
    I do not have the CUDA control panel in System Prefs, so THAT did not carry over.
    Any ideas would be appreciated, thanks!

    > I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
    Ugh. That causes so many problems.
    The first thing to try is deleting the CUDA frameworks from your Mac: Look in /Library/Frameworks for the CUDA.Framework and get rid of it.

  • My daughter wants a new Mac Pro; however, she will be living in London, England for several months, does she require a "special" Mac Pro  for her needs in London?

    My daughter wants a new Mac Pro; however, she will be living in London, England (we live in New Mexico).  My question is...Must she buy a "special" Mac Pro for her needs in London, or can she use an adaptor for power?

    Your welcome.  Most electronics have universal power supplies that can deal with overseas power standards - before she starts getting lots of adaptors with transformers, check the manual or specifications online for her equipment.  Often a simple adaptor that just adapts the physical US style plug to the UK style, or even better and cleaner, a new power cord, is all that is required.  Found this out when I went overseas myself last year.  And it can be overwhelming at first!
    Even though it's PC world, after doing a quick google search for you it's a pretty comprehensive and easy to read article:
    http://pcworld.about.net/news/Aug222002id103293.htm

  • I just got my first mac pro and I can't get the photos out of iPhotos moved on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. Thank you so much

    I just got my first mac pro and I can't get the photos out of iPhotos and move them on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. what to do? Thank you so much

    How is your external drive formatted? Use Disk Utility to check the volume format. If it is NTFS, you will need to reformat the HDD as exFAT in order to retain universal compatibility (RW to it on both Mac and Windows).

  • My 2008 Mac Pro running Lion will not play HDV1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. Anyone have any idea how to fix this?

    My 2006 - 2008 Mac Pro running Lion will not play HDV 1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. However, when I open the project on my other Mac Pro running Snow Leopard and FCP 6, the footage works fine as it does on my newer Imac running Mavericks and FCP 7. I have tried a Quicktime update on the Mac Pro that the footage doesn't work on but it says that I already have the newest version of Quicktime installed. I have also tried reinstalling the Final Cut Pro Studio twice, still no fix. I'm completely out of solutions and need to be able to edit HDV footage on this machine. Any help would be great. Thanks.

    there was a recent software update that seemed to screw HDV up.  Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
    Worst case scenario, do as Shane suggests.  But might I suggest you take a look at the user tips section of the forum.  there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

  • Hi, I want to install my lightroom version on a new mac pro. How do i get started. Can't find it on this site. Thx

    I have a new mac book pro and wan't to install my version of lightroom 5 from my old pc to the new one.
    How can i do that? Can't find it here on the site? Thx
    [email protected]

    Hallo, I installed the program as you said. Everything ok.
    When i have to give my serialnummer, it is not accepted. Code is not valid he said
    1160-4008-7475-7547-5706-0812
    Op 21-sep.-2014, om 17:44 heeft Rikk Flohr <[email protected]> het volgende geschreven:
    Hi, I want to install my lightroom version on a new mac pro. How do i get started. Can't find it on this site. Thx
    created by Rikk Flohr in Photoshop Lightroom - View the full discussion
    www.adobe.com
    Hit the Download link at the bottom the page.
    Hit Lightroom
    Hit Free Trial
    When you are done downloading, launch, and enter your serial number from your previous installation.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6749435#6749435
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

    I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

    Mail window may be in the Full Screen mode.
    Move the mouse pointer to the top right corner of the Mail window and hold it there.
    Menu bar should drop down and click the blue double arrow icon.
    Full Screen toggle shortcut:  control + command + F

  • Chess.app runs OK on my MacBookPro under OS 10.6.8. Under the same OS on my Mac Pro Chess.app will not show the hint for the next move.

    Chess.app runs OK on my MacBookPro under OS 10.6.8. Under the same OS on my Mac Pro Chess.app will not show the hint for the next move. The detail on the desktop MacPro is 
    Model Name:    Mac Pro
      Model Identifier:    MacPro1,1
      Processor Name:    Dual-Core Intel Xeon
      Processor Speed:    2.66 GHz
      Number Of Processors:    2
      Total Number Of Cores:    4
      L2 Cache (per processor):    4 MB
      Memory:    1 GB
      Bus Speed:    1.33 GHz
      Boot ROM Version:    MP11.005C.B08
      SMC Version (system):    1.7f10
      Serial Number (system):    G87212BJUPZ
      Hardware UUID:    00000000-0000-1000-8000-0017F20A3C06

    Hello
    did the keaybord shortcut work ?
    For info chess app come from system install
    HTH
    Pierre

  • First mac, is it getting too hot?

    Hi, I just bought my first macbook pro a couple days ago (15 inch 2.2 ghz, 4gb of RAM, 500gb @7200rpm) and was wondering if it is getting too hot. I have been playing a game on it and have been noticing it that it is getting pretty hot, so I downloaded SMC fancontrol to monitor the temperature. While I'm playing the game the temperature is anywhere between 80 and 85 degrees celcius at a fan rpm of anywhere between 2500 and 3600. I am just wondering if this is too hot or should be a concern to me. Thanks a lot.

    I would say those numbers are too high. Considering you can coagulate tissue at 70C. If those temps (80+ celcius) were correct, you would probably have permanent grey patches of skin that would eventually slough off leaving holes on your lap.  Ha ha. Seriously though those temperatures would coagulate your tissue.
    If you're concerned, get a secondary surface thermometer. Also I think there are companies that sell lap covers to put your computer on while you work.

  • My mac 13" retina gets too hot

    I bought may mac 13" retina a month ago and it gets  too hot while i use internet to watch movie online via iPhone 6 plus using personal hotspot. I force quited all other programs i might have open and still after 20 minutes having the same problem. I took it to apple and they ran diagnostic check and all were fine they even offered me if I'm not happy to change it with a new one as this is a month old, i refused.   HELP!! 

    Tried resetting SMC?
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    “During processor intensive activities—such as processing HD video or playing a game that makes extensive use of the graphics processor—the fans speed up to provide additional airflow.”
    http://support.apple.com/kb/ht4543
    Best.

  • I have a new Mac Pro and it seems to get hot...why?

    I'm new to Apple products and I have a MacBook Pro and it seems to get very hot.  Am I doing something wrong with it?

    Stedman.....I did that and under the temps., it would change as I watched it.  This is what I read most often.  Not sure if this is what you meant:
    HD Macintosh    33
    CPU    48
    CPU Heatsink 4   1
    Enclosure Base    34
    Enclosure Base 2    34
    Enclosure Base 3     33
    CPU (again???)    43
    CPU Diode     23
    Not sure if that's the info you asked for?  I've only had this several weeks and I notice it getting hot at times.
    Also, when I plug in the batter charger, it changes back and forth orange/green....
    I know I need serious help with this..I truly appreciate your reply. Jo

  • Does the iMac G5 get too hot?

    Greetings to all.
    I would like to start a thread about the iMac G5 and heat. I found a few old threads, but I would like to bring that topic up again.
    I have a 1st Generation iMac G5 (purchased end November 2004). For the second time since November 2004, it was defective and the Logicboard was replaced (so my Apple Dealer told me).
    First time, in November 2005, the screen went pink. Second time, earlier this month, my Mac didn't boot anymore.
    The full amount for the repair (including shipping to Apple (Belgium), work hours, etc.) was over 500.00 euro (about 700 USD for you, Americans).
    I believe that the iMac G5 (at least: my 1st Gen one) is simply getting too warm.
    The day before, I installed "Hardware Monitor". It gave the following (average) temperatures:
    CPU: 60.6 - 63.8° Celsius (141-164° F)
    HD: 57.5° C (135.5° F)
    It is my opinion that the (my) iMac is getting too hot to be "healthy". I have 2 PC's, in which I installed extra fans (at the back and at the side). One of these, with an Athlon64 3000+ (1.8 GHz) and a 120 Gb Seagate Barracuda gives (average) temperatures for the:
    CPU: 36.5° C (97.5° F)
    HD: 26° C (78.5° F)
    My second PC, an old (modded) HP Vectra, with an Intel P4 at 1.6 GHz and a 80 Gb Seagate Barracuda, gives as average temperature (HD only):
    HD: 37° C (98° F)
    It may not be correct to compare my iMac with PC's - but harddisks are harddisks, wheather it is a Western Digital (250 HD in my Mac) or a Seagate (PC HD's), and it is only logical that a(n average) HD temperature of 57 degrees Celsius (128° F) in the long term can not be healthy, while the harddisks of my PC's are a lot, lot cooler.
    The PPC, too, gets much hotter than my Athlon CPU (and the P4 most likely too).
    Therefor: is my suspicion correct that the/my iMac G5 in general is getting too hot for its own good? Even though it may be summer here (Belgium), I still find such a difference in heat values between my iMac and my PC's not "right".
    Both the times that my iMac was defective, the Logicboard was replaced.
    Is it possible that in both cases heat is the problem (directly or indirectly) of the defects of my iMac?
    Basically we have a desktop computer constructed like a laptop, with all the hardware stuffed together in a very tight space. Why did they not keep the heat issue more in mind, when the iMac G5 was designed?
    I believe that the heat is a very negative factor in the/my iMac G5. If I will have to pay such a small fortune, every time my Mac breaks down, being a Mac owner will become quite expensive.
    iMac G5 (PPC), 17-inch, Superdrive, Mac OS X (10.4.10) 1.5 GB RAM, 250 Gb Western Digital HD
    iMac G5 (PPC), 17-inch, Superdrive, Mac OS X (10.4.10) 1.5 GB RAM, 250 Gb WesternDigital HD
    iMac G5 (PPC), 17-inch, Superdrive,   Mac OS X (10.4.10)   1.5 GB RAM, 250 Gb WesternDigital HD

    Your Mac should have been repaired under the Apple power supply or video and power issues as long as your serial numbers were covered.
    As far as normal operating temps are concerned, my Rev A is at this moment, running at CPU T-Diode 144∘and my Hard Drive is at 128∘so your temperatures seem well within normal ranges.
    Yes, the machines tend to run a bit hot, but as long as the ambient temperature is not too high, they are fine. The failures were originally cause by a bad batch of capacitors but since those have mostly been replaced, the machines are much more reliable.
    Some people train a small fan on the back of the computer to keep it cool, that may help you.
    Miriam

  • MacBook air get too hot

    I have MacBook Air 11 Inch.
    It's get too hot whenever I used MacBook. Also whenever it gets hot my Mac get slow.
    It was not like that when I bought it.
    I like to format my Macbook Air. Like I like to have my MacBook air like first time I got it.
    How i can do it?

    well you cant really fix that issue but if you run heavyt apps it tends to overheat but it will not damage the machine thats why they have fans to coll them off
    if it gets really hot then take it to the apple store and there might be a problem with the cooling system

Maybe you are looking for

  • Only GDR3 update on my Lumia 820 - Lumia Black is ...

    Hi! I updated my phone to GDR3 yesterday, but I didn't get the Lumia Black update, please see the attached screenshots for details. Am I missing something, or do I just have to wait for the Lumia Black update arrive? On the Nokia website it says that

  • Syncing stuff on Ipod and Itunes

    *I turn on the computer, open itunes and it is fine but when i put my ipod nano in itunes frezzes and the ipod doesn't register on the computer. When i take the ipod out it is back to normal. Can anybody help????*

  • What can i do for not receiving card

    Hello, i download the new "cards" app for iOS 5, and create a card on 13 Oct 2011, sending to Hong Kong. the card still not received yet, what can i do? Thank you William

  • How to get rid of box around exported art

    I only use illustrator when I need to change something, so I have no idea what I am really doing. I have a logo in illustrator that has been saved as an eps file. When I import that eps file into another program, it comes in with a rectangle around t

  • New Small Window

    In dreamweaver it's so easy to open a certain sized new window - but how do you do it in Flash? I've looked at some tutorials and they're all old and don't work any longer...I'm using MX 2004 Here's the sample of what I'd like to do - click on the "G