Mac Pro laptop running very slow and freezing often

Recently my Mac has been acting funny. I will be surfing the net or just trying to check my email and the spinning wheel will come up and spin forever. Sometimes it stops and lets me continue, sometimes and stops for a few minutes and does it again, other times I have to restart the computer. I have plently of memory left. I have checked to see what programs are running, etc and nothing looks abnormal. However when I created a new user - everything works fine. So question - how do I fix my user so that works just as good as the new user?

How are checking your emails? I had a similar problem but surfing the web with Safari, then I discovered that there was an update for Safari, updated and the problem is gone. Working great.

Similar Messages

  • My mac pro is running very slow and I have a pin wheel turning

    My mac pro is running very slow and I have a pin wheel turning what can I do?

    https://support.apple.com/kb/DL1433
    https://www.apple.com/macosx/recovery/
    http://support.apple.com/kb/HT4718

  • On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    What version of Mac OS X?
    What home page?
    What browser?

  • Mac book pro is running very slow and won't connect to the Internet

    Mac book pro is running very slow and won't connect to the Internet. Please help I'm rubbish with computers!

    Mac book pro is running very slow and won't connect to the Internet. Please help I'm rubbish with computers!

  • HT1338 My Mac book Pro is running very slow and the rainbow ball is appearing all the time. Any suggestions for clean up??

    My Mac book Pro is running very slow and the rainbow ball is appearing all the time. Any suggestions for clean up?? I have the OS X Lion system.

    As well as what a brody asked :
    - do you need more RAM? (run Activity Monitor and see how much free RAM - green - is available)
    - do you Restart fairly regularly, e.g. at least once a week, to clear out any swap or temporary files?
    - do  you need to do maintenance, e.g. clearing out caches and unused logs, etc?

  • My MacBook pro is running very slow and unresponsive.

    My MacBook pro is running very slow and unresponsive. I have mid 2010 model running on lion. Past few days it looks very unresponsive. Tried to reinstall lion as clean copy. Still no luck. Any help on this is much appreciated !
    My model has 4 gb ram.

    Things That Can Keep Your Computer From Slowing Down
    If your computer seems to be running slower here are some things you can do:
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Repair the Hard Drive - Lion
    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    Suggestions for OS X Maintenance
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • My mac pro is running really slow and the beach ball keeps appearing

    my mac pro is running really slow and the beach ball keeps appearing
    is there some good free software that cleans it up, new to macpro
    Software  OS X 10.9.2 (13C1021)

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • HT1338 Is there a Mac System Clean-up? My computer is running very slow and freeze all the times

    I don't know why my computer is running very slow and keeps freezing all the times.  It would take at least 2-3 min to load up after the not using it for 5 min.  For instance when I type my paper or doing anything on the computer and leave for a fews min after come back it would not start and the icon keeps on spinning.
    Thanks

    Pretty much all "clean-up" utilities will just make things worse.
    You need to determine what it is that is causing the problem.
    How much RAM do you have?
    For the following, report what you get when the system is running slow and beachballing.
    Open Activity Monitor (Utilities folder) and click on System Memory tab at the bottom of the screen. What does it say for Page Outs?
    Also, at the top of the window, select All Processes. Click on the %CPU header until the arrow points down. Anything pop up at the top of the list that is using a very high percentage of CPU?
    What you describe can be caused by incompatible third-party software. Boot into Safe mode and see if the problems still exist. Safe mode will be a little slower than normal, but you shouldn't see the system freeze up.
    http://support.apple.com/kb/ht1455

  • My MacBook Pro is always running very slow and freezes up at least once a day, please help!!!!

    Over the last 6 months my Macbook pro is running slow and freezes up a lot, I've done a check with EtreCheck, report below.
    If anyone can offer some advice I would be very grateful, cheers....
    Problem description:
    Consistently slow running of all programs and freezes up for 2/3 mins
    EtreCheck version: 2.0.11 (98)
    Report generated 16 November 2014 00:35:40 GMT
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 -
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 9 days 23:20:46
    Disk Information: ℹ️
      APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 498.88 GB (318.43 GB free)
      Encrypted AES-XTS Unlocked
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Problem System Launch Agents: ℹ️
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.CallHistorySyncHelper.plist
      [failed] com.apple.cmfsyncagent.plist
      [failed] com.apple.EscrowSecurityAlert.plist
      [failed] com.apple.gamed.plist
      [failed] com.apple.sbd.plist
      [failed] com.apple.spindump_agent.plist
      [failed] com.apple.telephonyutilities.callservicesd.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.AirPlayXPCHelper.plist
      [failed] com.apple.AssetCacheLocatorService.plist
      [failed] com.apple.awdd.plist
      [failed] com.apple.corestorage.corestoragehelperd.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.icloud.findmydeviced.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.periodic-daily.plist
      [failed] com.apple.periodic-weekly.plist
      [failed] com.apple.softwareupdate_download_service.plist
      [failed] com.apple.wdhelper.plist
      [failed] com.apple.xpc.smd.plist
    Launch Agents: ℹ️
      [running] com.epson.eventmanager.agent.plist Support
      [loaded] com.epson.ews.launcher.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
    User Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      Default Browser: Version: 600 - SDK 10.10
      SharePointBrowserPlugin: Version: 14.0.0 Support
      Silverlight: Version: 4.1.10329.0 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User Internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 7.1 Support
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
    Time Machine: ℹ️
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 498.88 GB Disk used: 180.44 GB
      Destinations:
      Seagate Backup Plus Drive [Local]
      Total size: 999.53 GB
      Total number of backups: 7
      Oldest backup: 2013-12-06 12:44:36 +0000
      Last backup: 2014-11-03 17:58:25 +0000
      Size of backup disk: Adequate
      Backup size 999.53 GB > (Disk used 180.44 GB X 3)
    Top Processes by CPU: ℹ️
          5% WindowServer
          1% EEventManager
          0% fontd
          0% configd
          0% AppleSpell
    Top Processes by Memory: ℹ️
      137 MB com.apple.WebKit.WebContent
      116 MB Safari
      47 MB sandboxd
      47 MB WindowServer
      43 MB Finder
    Virtual Memory Information: ℹ️
      913 MB Free RAM
      1.43 GB Active RAM
      635 MB Inactive RAM
      933 MB Wired RAM
      36.97 GB Page-ins
      2.13 GB Page-outs

    You may wish to read about maintenance and upkeep of the OS X, plus other
    information, across several topics in this site with topics divided into Guides:
    •Tech Guides - TheSafeMac:
    http://www.thesafemac.com/tech-guides/
    Sometimes, items may have been inadvertently downloaded by accident or due
    to poor advisement, and of those some can be a cause of slowness in Mac OS X.
    Also, the use of scanning antivirus software can be a cause of slow and disruptive
    system issues; since antivirus for the most part is not effective due to the nature of
    the Mac OS X and the inability of an AV application to have records of unknown, &
    unsubstantiated or rumored issues in the wild, since few or none are known to exist.
    The note in the etrecheck report of excessive Page Outs, implies directly that the
    computer may need to have more RAM installed; a matching pair of higher capacity
    correct spec RAM chips, could be purchased from a reputable source & installed.
    As much as, perhaps 16GB in a RAM upgrade, depending on the MacBook build.
    All of those red-lettered items in the report that did not load, appear to be system
    parts; perhaps that may be something to investigate. Not sure why that is...
    {Because today is part of a weekend, I'd suspect the time of day and weekday are
    both behind the lack of an earlier reply to your post here. Also, if there have been
    weather or other disruptions in the lives of those volunteers who offer help, then
    maybe they've had to modify their plans around such events. Or power outages.
    We had one here for more than an hour, and everything went out. Even phones.}
    So hopefully some other knowledgable readers may contribute ideas on how to
    resolve the issues; troubleshooting may be helpful, and to read through sections
    of TheSafeMac to see if there is any malware, adware, or other odd activity that
    may point to a cause; removal suggestions for those are in that site. Also, if you
    had visited any torrent or sharing sites, or downloaded free yet contaminated items
    from software download sites, they could also affect your computer. There are
    a few areas in that web site worth reading through.
    In any event...
    Good luck & happy computing!

  • My macbook pro is running very slow and very very hot

    hi everyone I have a 13 inch mid 2012 MacBook pro,
    it is running very very slow and extremely hot, I downloaded a program called smc fan control and it is reading the internal temperature of my computer as 80 degrees Celsius. I was looking on the forums and saw that I should run an apple hardware test. which I have done and it is coming up with Error 4/MOT/4/40000002: EXHAUST-2003
    what does this mean? is it something to do with my fan?
    also there is a very strange clicking noise when I lift the mac up or if its on its side and sometimes it just randomly freezes,  the computer does not respond and then it restarts.
    what do I do?
    please help!

    " the fan didn't seem congested with dust, at least not enough to cause any malfunction."
    The lint and crap builds up in the heat exchanger radiator. It's the grilled thing at the output of the fan.
    https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2012+Fan+Replacemen t/10367
    Look at step 6. It's that grilled thing at the top of the fan. If you remove the fan that radiator is probably clogged with lint. Brush it all away and if possible blow out the fan with compressed air. Make sure the fan turns freely and doesn't feel stiff.
    http://s291.photobucket.com/user/spudnuty/media/13%20inch%20MacBook%20Core%202%2 05-2007%20dirty%20rainstrm/MacBookHeatsinkinlet.jpg.html?filters[user]=68196367& filters[recent]=1&sort=1&o=21
    This isn't a MBP radiator but the problem will look like this.

  • My macbook pro is running very slow and restarts

    I was working on my 2008 Macbook Pro yesterday and it restarted on its own.  Now, when I log in, it loads very slow and will restart unexpectedly.

    Reset you SMC which can fix power-related issues, and also reset the PRAM (see below). If that doesn't fix it, please post back.
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    You might also run the Apple hardware test.  You'll need your original OS X disks to run it.

  • My Mac pro is running very slow. Memory used 3.99 out of 4.00

    Hello,
    My mac is running very slow
    - I have noticed that memory used is 3.99 out of 4.00 and the process taking most of it is safari web content. Problem also appears when I use Firefox
    - this happens even I only have safari or firefox open. No other applications
    - I have about 80Gb free disk space
    Thanks for any suggestions

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 300 25 5120 ' KiB/s' 1024 85 % 5 1 ' MB/s' 25000 ' ports' 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' 'DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH' -86 \< '>=' 'N\/A' down up 100 25 recvfrom sendto 'v[0]=' 'a=(' ';[[ "${v[0]}" ]]' ');v[0]=$a;ind=0' '(){ x=;[[ "$4" ]]&&x=\"${v[$4]}\";' '`eval "${c1[$1]} ${c2[$2]}" "$x"|' ' "${s[$3]}"`' ';};' CFBundleIdentifier 25 );f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' '\n%s: user %s%%, system %s%%\n' '%s\n\t(%s)\n' '%s %s' );s=('/^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g' 's/^ *//;5p;6p;8p;12p' '/ Id/s/.+: //p;/Mem/{s/[^0-9]//g;p;}' '1,5d;/[Bmy].*:/d;H;${g;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;}' '5h;6{H;g;/P/!p;}' '/Cy|Cond.*: [^N]/s/^.*://p' '/:$/{s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}' 's/^.*C/C/;H;${g;/No th|pms/!p;}' '/= [^GO]/p' '{$1=""};1' '/Of/!{s/^.+is |\.//g;p;}' '/(sh|ng|ic)$/p' '/:/{$4=""};1' 'NR==2{print $4}' '/po/{sub("\\.","");print int($2/256)}' '$p' 2p '$8~/[RW]/{print $4,$1,int($9/10000000)}' 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}//;s/ .+//p' '/Launch[AD].+\.plist$/p' '/\.xpc\/(Contents\/)?Info\.plist$/p' 'NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/{print $3}' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' '/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/d;/Lib.+\/Info.plist$/p' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' '/\/(Contents\/.+\/Contents|Frameworks)\//d;p' 's/\/(Contents\/)?Info.plist$//;p' '{gsub("^| ","||kMDItem'${p[43]}'=");sub("^.."," ")};1' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '/e:/{print $2}' '1d;/[^)]$/{s/^\(.+\) //;h;d;};/[^ ]\)$/{s/^.+: |.$//g;G;s/\n/:/p;}' '/r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./{print $NF;exit}' '!/^T/{printf "(static)";exit}' 's/^.+://p' '(/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/)' '/lR/{print $2}' 'NR==2{print int($7/1024),int($10/1024)}' 'END{$3=int($3/10240);print}' 'END{if($5~/pro/)print$3}' 'BEGIN{L='${p[44]}'}!/^[[:space:]]*(#.*)?$/{l++;if(l<=L)f=f"\n\t"$0}END{print "\nContents of "FILENAME"\n"f;if(l>L)print"\n\tand "l-L" more line(s)"}' 'BEGIN{FS="= "}/Path/{print $2}' '/^ +B/{s/.+= |(-[0-9]+)?\.s.+//g;p;}' 'END{print NR}' '/id: N|te: Y/{i++}END{print i}' '/^F/!p' '/:/{$0="'"${p[28]}"'"};1' 'BEGIN{FS=":"}{n=split($3,a,".");sub(/_2.+/,"",a[n-1]);print($2,a[n-1],a[n],$1)|"sort";b=b$1}END{if(b)print("\n\t* Code injection")}' '/apsd|OpenD/!s/:.+//p' '$2>'${p[9]}'{$2=$2-1;print}' );c1=(system_profiler 'pmset -g' nvram fdesetup find syslog df vm_stat sar ps iostat 'sudo iotop' top pkgutil PlistBuddy whoami cksum kextstat launchctl 'sudo launchctl' crontab 'sudo defaults read' stat lsbom mdfind 'for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done' 'defaults read' scutil route networksetup 'sed -En' awk '/S*/*/P*/*/*/*/*/airport -I' netstat 'sudo dtrace' 'sudo profiles' 'sudo crontab' );c2=('com.apple.loginwindow LoginHook' '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[43]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message CReq "caug|dead[^l]|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Ane "SMC:" -o -k Sender fseventsd -k Message CReq "SL"' '-u 1 10' 'acrx -o comm,ruid,%cpu' '-C 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` " /e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /u*/lo*/e*/per*/*/* .launchd.conf" list getenv '/Library/Preferences/com.apple.alf globalstate' --proxy '-n get default' -listnetworkserviceorder --dns -getdnsservers -getinfo '-b -I' '-m /' '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -P );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=" SP${p[j]}DataType";done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@[execname,uid]=sum(arg0)} tick-10sec {exit(0)}'";done;l=(Model 'RAM (GB)' 'RAM details' POST 'Battery cycles' 'Battery condition' 'Bad plists' 'High file counts' User Heat 'System load' 'boot args' FileVault 'Diagnostic reports' Log 'Free space (MiB)' 'Swap (MiB)' 'CPU total' 'CPU per process' 'Average I/O (MB/s)' 'I/O per process' 'Mach ports' kexts Daemons Agents launchd 'Startup items' 'Admin access' 'Root access' Bundles dylibs Apps 'Font issues' 'Inserted dylibs' Firewall Proxies DNS TCP/IP RSSI Profiles 'Elapsed time (s)' 'Root crontab' 'User crontab' 'Login hook' 'Global login items' 'User login items' 'Safari extensions' 'Restricted files' 'Hidden apps' );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Average ${p[29+j]}stream data (KiB/s)";l[N4+2+j]="Current ${p[29+j]}stream data";done;A0(){ id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;v[11]=$((v[3]-`sysctl -n kern.boottime|cut -c9-18`));};for i in 0 1;do for j in 0 1;do eval A$((1+i+2*j))"${p[39]}${p[35+j]}${p[40]}${c1[30+i]}${p[41]}${p[37+j]}${p[42]}";done;eval A$((5+i))'(){ v[0]=`while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}"`;[[ "${v[0]}" ]];};';eval A$((7+i))'(){ v[0]=`while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}"`;[[ "${v[0]}" ]];};';done;A9(){ v[0]=$((`date +%s`-v[3]));};B00(){ v[0]=${a[++ind]};};for j in 0 1; do eval B0$((1+j))'(){ v[0]=$((v[0]'${p[26+j]}'p[$1]?v[0]:0));};';eval B0$((3+j))'(){ a[$1]=${a[$1]%[.+-]*};((a[$1]'${p[26+j]}'p[$2]))||unset a;};';done;B05(){ v[0]=`tail -n${p[$1]}<<<"${v[0]}"`;};B06(){ [[ "${a[*]}" ]]&&a=("${a[$1]}" "${a[$2]}");};B07(){ unset a v[0] ind;((v[2]==0))||{ v[0]=No;false;};};B08(){ v[$1]="${v[0]}";};B09(){ a=(${v[0]});};B10(){ v[0]=`grep -F "${v[$1]}"<<<"${v[0]}"`;};B11(){ n=$((${#a[@]}-1));((n>2))||return;A="${a[*]}";B="${a[n-1]} ${a[n]}";a=("${A% $B}" $B);};B12(){ v[0]=;[[ "$a" ]]&&v[0]="$a (UID ${a[1]}) is using ${a[2]}${p[$1]}";};B13(){ v[0]=$((v[0]/v[$1]));};B14(){ v[$2]=`eval "sed -En '${s[$3]}'"<<<"${v[$1]}"`;};B15(){ v[$2]=`eval "awk '${s[$3]}'"<<<"${v[$1]}"`;};B16(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B17(){ v[0]=`paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: '{printf("'"${f[$3]}"'",$1,$2)}'`;};B18(){ unset a v[0] ind;((v[1]==0))||{ v[0]=No;false;};};B19(){ v[0]="${a[++ind]}";};B20(){ v[0]=`grep -Fv "${v[$1]}"<<<"${v[0]}"`;};C0(){ echo $'\n'"${v[0]}";};C1(){ [[ "${v[0]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${v[0]}";};C2(){ v[0]=`echo ${v[0]}`;[[ "${v[0]}" != 0 ]]&&C1 0 $1;};C3(){ v[0]=`sed -E "${s[0]}"<<<"${v[0]}"`&&C1 1 $1;};C4(){ [[ "${a[*]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${a[@]}";};A0;{ B18;C2 27;B18&&! B07&&C2 28;A1 15 37 25;C2 8;A1 0 $N1 1;C0;A3 0 $((N1+1)) 2;C2 0;B00;B01 10;C2 1;A1 0 $((N1+2)) 3;C3 2;A1 0 $((N1+3)) 4;C3 3;A3 0 $((N1+4)) 5;B02 11;C2 4;B00;C2 5;for i in 0 1 2;do A1 0 $((N1+5+i)) 6;C3 $((N3+i));done;A1 1 10 7;C3 9;A1 1 11 8;C3 10;A2 2 12 9;C2 11;A1 3 13 10;C2 12;A1 4 19 11;B15 0 0 54;C3 13;A2 5 14 12;B05 12;C3 14;A2 6 36 13;B01 13;C2 15;A2 7 37 14;B02 15;C2 16;A3 8 15 15;B03 4 16;B06 1 3;C4 3 17&&{ A3 9 16 16;B11;B12 17;C2 18;};A2 10 38 17;B02 18;C2 19;B07&&{ A2 11 17 17;B05 19;B09;B11;B04 2 19;B12 20;C2 20;};A3 12 39 15;B11;B04 2 21;B12 22;C2 21;A1 13 40 18;B08 4;B14 4 0 19;A5 14 6 52 0;B08 5;A1 17 41 20;B20 5;C3 22;B14 4 6 21;A5 14 7 52 6;B08 7;B14 4 0 22;A5 14 6 52 0;B08 8;B16 7 8;B07&&{ A2 19 26 23;B20 7;C3 23;};A2 18 26 23;B20 7;C3 24;A1 4 20 21;B20 6;B08 9;A6 14 7 53 9;B08 10;B17 9 10 4;C3 25;A1 4 21 24;C3 26;B14 4 12 26;B14 4 13 27;A1 4 22 29;B20 12;B08 14;A6 14 6 53 14;B08 15;B17 14 15 4;B14 0 0 30;C3 29;A1 4 23 27;B20 13;C3 30;A1 24 24 32;C3 31;A1 23 18 28;B08 16;A2 16 25 33;B20 16;B14 0 0 34;B08 21;A8 47 21&&C0;B07&&{ A1 21 0 32;C3 43;};for i in 0 1;do A2 14 $((1+i)) 48;C3 $((44+i));done;A1 14 3 49;C3 46;A2 4 4 50;C2 47;A1 4 5 32;C3 48;A2 0 $((N1+8)) 51;C2 32;A1 4 8 55;C3 6;A2 22 9 56;C3 7;B07&&{ A1 36 42 32;C3 41;};A2 20 42 32;C3 42;A1 25 37 32;C3 33;A1 26 28 35;C2 34;A1 27 29 36;C3 35;A2 28 30 37;B08 17;A1 29 31 38;B10 17;B14 0 18 41;A2 27 32 39&&{ B08 19;A2 29 33 40;B08 20;B17 19 20 5;};C2 36;A2 29 34 42 18;C3 37;A2 32 37 43;B01 25;C2 38;A4 33 35 44 17;for i in 0 1;do B13 11;B02 $((31+i));C2 $((N4+i));B19;done;B07&&for i in 0 1;do A4 34 $((N2+i)) 45;B11;B04 3 $((31+i));B12 14;C2 $((N4+2+i));done;B07&&{ A2 35 43 46;C2 39;};A9;C2 40;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At or near the top of the results, there will be a line that begins with "System Version." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • My iMac suddenly runs very slow and freezes frequently.  Ideas?

    My iMac has started running very, very slow and then suddenly freezes and we have to reboot.  I have no idea how to fix that....

    Charly,
    That's not much info to go on.  Sorry you are having a problem.....
    I can suggest a couple of things....
    Go to "Applications>Utilities>DiskUtility"
    ..... run "First Aid" as shown in red boxes below....
    This just might help... at least it is a start.....
    I routinely use a little clean/maintenance utility called "OnyX" it performs lots of good house keeping stuff...
    If this dosen't help you are going to have to ask someone smarter that I am......Again, it is a starting point at least.........
    Good luck......

  • HT1338 my mac pro started running very slow not all the time it is only 2 months old

    My new macpro has been running very slow off and on (mostly on) it is only 2 months old I took it into the genius bar and they could not find anything wrong.  I took it home and it ran fine for a short while then started up again. I have watched activity monitor and can see no direct corellation.  Anyone have any ideas?

    Did you install anything new lately?
    Run any programs that purport to "clean", "speed up", or "optimize" your Mac

  • Having issues with 13" MacBook Pro. Running very slow and blank screen and sleep mode.

    Bought my MBPro summer 2009. About a month / 6 weeks ago it began to run extremely slow at points. Now it is running poorly and getting very slow on a daily basis, to the point where it will not open applications, documents or even web pages for in excess of 5 minutes. I'm beginning to lose patience!
    Also at the exact same time of these performance issues occuring, my MacBook Pro will not awaken from sleep mode when the lid is closed. Showing a blank dark screen and having to hard reset in order to boot up my system again and get it running.
    What is the best solution in order to resolve these issues?
    Your help is greatly appreciated.

    Did you run Disk Utility>First Aid?  If so what were the results?  This is a copy of mine, note that the bottom line says:  The partition map appears to be OK:
    Ciao.

Maybe you are looking for