Mac Pro/ Leopard/ Boot Camp/ XP and 2 ATI Radeon XT1900 ????

I recently went surfaced from a hardware nightmare with my Mac Pro. I need 4 monitors on the XP pro/ boot camp side and was unble to do so using an added ATI XT1900 to my Mac Pro. The drivers would not successfully load. Also the added card buggered the original card. After uninstall and some trouble shooting I was able to get back to a functional configuration with 1 card.
Now that Leopard is out with the new boot camp.... does anyone have experience (successful) with 2 video cards (ATI radeon xt1900) in boot camp/ XP pro??? I dont want to go through me last experience as my job depends on the XP/ boot camp working.
Thanks in advance for your help.
Dan

Correct me if i'm wrong, but the original poster didn't ask or mention anything about Crossfire. (though as a side note, I have read that some people have sucessfully got their 7300gt's into SLI by purchasing a special dongle and downloading a hacked driver.)
And as to whether a user would need two or more monitors for their needs is completely up to the them if it fits their needs, the way i see it the term 'waste' is subjective depending on the user and his/her needs.

Similar Messages

I have put Windows 8 on my Mac pro, in boot camp, no I am unable to load drivers

I have put Windows 8 on my Mac pro, in boot camp, no I am unable to load drivers to get it working as it should. I have tryed Winows 7 Con, in setup.

Did you download the drivers to a FAT32 formatted USB drive per the instructions?

HT4818 Boot from laptop's Windows Hard Drive in Mac Pro via Boot Camp

I have a work laptop that is on Windows 7. It's a work hard drive so I don't want to mess with it (particularly as it's encrypted). I basically want to use it on my Mac Pro rather than my piece of junk standard issue laptop when I'm working from home.
What I would like to do is pull the drive out, put it in my Mac Pro and boot from it using Boot Camp. Guidance I've seen so far talks about not being able to use an external drive but having to partition an internal drive. However, if I've got everything on a separate drive (i.e. my laptop's drive), will this work?
Thanks!

Thanks for the quick (and no nonsense) response!

Mac Pro w Boot Camp - SATA, AHCI, EFI, BIOS - what can we do? (Cross Post)

I am trying to centralize the discussion of this particular issue which prevents the Mac Pro from being the ultimate cross platform system.
Please refer to the original thread located at:
http://forums.macrumors.com/showthread.php?t=225349
Mac Pro 2.66 Mac OS X (10.4.7) 4 x 512MB RAM Modules, Boot Camp 1.1

I agree with all the posts. I did the whole thing again to 1.1 and find this system base device and the sata drive speed UDMA issue to be serious for cross platform. What I would like to know is what is the performance with the sata on the Mac OS side. I did a encode of video and it
didn't seem to be much faster than my G5 Dual 2.0 processor machine. I would like to hear from others on their video encoding to see if this sata issue goes throughout the whole machine. I'm dissappointed with the winxp thing. 1.1 is better and did alot better install, but I do realize that it is beta. Non the less, the sata issue is huge. What makes it worse is that Intel won't even give a little bit of support, basically they said to me that it was all Mac problems. I hope there are many changes, in the mean time the cross platform is not working for me. I did get autocad to run reasonable, but nothing like it should with the power under the hood.
Mike in WA
mac pro Windows XP Pro

Mac pro 2010 boot camp wont connect to internet

I tried everything possible, I installed windows vista 64 bit edition, everything else works great but the internet wont, when I go to device manager it cannot identify one of the network adapters. I load the boot camp drivers already, and updated it to , it didn't work. DOES ANYONE KNOW WHAT DRIVERS I NEED TO DOWNLAOD FOR IT TO WORK

This is a Windows issue. You can try your post in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237

Mac Pro 5.1 (Mid 2010) with Ati Radeon 5870, I can't install Maverick, don't support the graphic driver

I have a Mac Pro with Ati radeon hd 5870 1024 MB, after the first reboot in the installation of Maverick, the screen does strange things as if the driver does not support.

Hello pitin,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
You can reset the Mac's parameter RAM and SMC.
Best of luck,
Mario

Mac Pro 3.1 and ATI Radeon 3870 running Snow Leopard

Hi.
Anybody who can give me a straight answer here.
I have a Mac Pro3.1 8 Core 2.8Ghz with Radeon 3870 card. (Standard 2600 HD)
Right now it runs 10.5.8 with no problems but i want to update to 10.6.3 Snow.
But someone told me the 3870 card isn't working with Snow Leopard.
Is that right ?

Someone? not working? I think they mean that some features won't be supported, like perhaps OpenCL.
Use GT120 cheap and works or shell out for ATI 4870 (or wait and see if anything comes out this year).
http://store.apple.com/us/product/MC002ZM/A
Most of what is written seems like it wasn't a tech writer, but then Apple doesn't get into telling customers what UEFI/EFI64 is the over-riding requirement.
Take Apple hardware specs with grain of salt.
The 4870 works in ALL Mac Pro models (and look at the threads, or the comments on the product page why not). No mystery there either.
http://store.apple.com/us/product/MB999ZM/A
Even the GTX 285 works, if interested.
http://store.apple.com/us/product/TW387ZM/A
And one person has both ATI 4870 + GTX 285, using a couple break out power cables and adapters.
*2009 Mac Pro owner running GTX-285 and ATI 4870 Cards*
(via Aux power Y adapters) And yes, he knows that apple lists 300W Max for the PCIe cards in the manual.
I've got the dual high-power graphics cards running without a hitch. It's rendering with the GTX 285 and CUDA now while I use the computer with the Radeon 4870 (no GUI lag, which is a nice change from using the GTX 285) http://www.xlr8yourmac.com/

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and somehow it crashes the mac side peridoically. I am told I need to "clean" it and reinstall lion using the recovery drive. will that delete the windows partition too??

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and now the mac side crashes/freezes periodically, especially iphoto. I am told by the genius' that I probably need to "clean" it and reinstall lion using the "recovery drive" which resets everything back to default and reinstalls the lion operating system. My question is will this also delete the "windows" partition drive and all that data too. If so that will be a huge pain in the ___ to back up and reinstall boot camp and windows. I want to shoot the lion.

There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

When completing install win 8 pro on my macbook pro using boot camp, the win 8 can't be started to complete win configure like user account and others, please help

please, when I installed win 8 pro using boot camp vers. 5.0.2 it was completed but when win start the first time to be signed my user name and password the mid of screen appeare blue and the other black, then the whole things stoped.
knowing that the win instalation going smoothley without problem during progress
regards

Did you download and install the Bootcamp Windows Support software according to the Bootcamp Installation Guides? http://www.apple.com/support/bootcamp/
There is a Bootcamp Forum here. https://discussions.apple.com/community/windows_software/boot_camp
You should ask Bootcamp questions there. The moderators may move this thread to the Bootcamp Forum.

Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please

I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.

Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS.

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Please don't double post. Look at your other thread.
If you want to get rid of Windows and the BC partition use the Boot Camp assistant program to remove the Win/BC partition. Don't do it manually with Disk Utility Use the BC A program.

HT5639 Do I need to uninstall boot camp 4 before I install and update to boot camp 5. I already have windows 8 pro with boot camp 4 installed. Do I need to unistall boot camp 4 or not necessary?

I already have windows 8 pro with boot camp 4 installed on my macair book 11". I have searched the entire articles on how to upgrade boot camp 4 to boot camp 5 but have found no answer as to my question: Do you have to uninstall boot camp 4 drivers before you install boot camp 5? I am not sure if it is ok to install boot camp 5 directly without uninstalling boot camp 4 because there might be driver version conflict. So I have not installed boot camp 5. Is it ok to install boot camp 5 withoust uninstalling boot camp 4? Your answers will be much appreciated. Thanks.

Welcome to Apple Support Communities
You don't have to uninstall Boot Camp 4 drivers before installing Boot Camp 5 drivers. Boot Camp 5 drivers will simply overwrite Boot Camp 4 drivers, so you don't have to uninstall old drivers before installing new ones and making that process easier

I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows. I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC or not?

I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows. I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC and finalizing the Windows 7 installation (for the 1st time) or not?
I am worried that may lose my information... Appreciate any feedback! Note: already half-way in the process of installing!

Yes, IF you picked the right partition, as in the Boot Camp partition. If everything is done right you should be able to boot into the Mac side.
If you already booted into Windows and are at the point of installing the Boot Camp Drivers your already done installing Windows! Yea! All you need to do is just install the drivers and everything should work normal.
The Windows partition and the Mac partition are seen as two different HD's now as far as the computer knows.
You can use the Boot Camp control panel in Windows to boot into the Mac side and the Startup Disk in System Preferences on the Mac to switch to Windows. If you can't then press and hold down the Option key untill you get the boot screen.

Mac Pro 2008 and ATI Radeon HD 5770

According to many other threads in this forum the ATI Radeon HD 5770 graphics card is said to work fine with the Mac Pro 2008 (model no. 3,1) though the Apple Store lists the Mac Pro (Mid 2010) under system requirements. Well, before I’m going to upgrade my Mac against Apple’s will, I’m just curious to know if anyone has found out why Apple restricts the compatibility to Macs from mid 2010 on. Is there an issue that affects only a small number of machines? Or is there a software incompatibility popping up under rare circumstances? What is the reason for this? Why does Apple not grant downward compatibility?

Apple does marketing and doesn't do a bang-up job on writiing technical requirements on hardware upgrades and testing. It doesn't make sense, there is no reason for not just "works with 10.6.5 or later on ALL Mac Pro models."
something nice and clear and so avoids all the questions and discussion.
Radeon HD 5870 versus 5770
2008 has PCIe 2.0 so no lose of bandwidth.
And I guess you ignored the numerous comment section on the product page? where people said it works.
ATI Radeon HD 5770 MC742ZM A

Snow Leopard Boot Camp Install Woes

I'm having some trouble installing boot camp. I have a MBP 2.2 and I have just installed OS 10.6 and I am trying to reinstall my boot camp partition. I am using an HP external USB DVD drive (which has been used to installed boot camp successfully in the past and is what I used to install SL). Anyway, 10.6 installs with no problems and then I am able to use boot camp assistant to set up the partition and the computer restarts. Then the disc attempts to spin up (I am trying with both Windows 7 32-bit and Windows XP... both discs have been used successfully in other situations) and then the screen usually stays grey/blank. Sometimes I can hold option and I get the HDD icon and it hangs. If I disconnect the drive and start the computer I get the apple icon and then it flashes a circle with a line through it and goes no further. Does anyone have any ideas? I am pretty sure the drive and the discs are good because I have used them to install windows on other macs with no problems.

I've also got this problem, after upgrading to Snow Leopard I couldn't access my windows partition anymore, the startup screen would hang after clicking the arrow under Windows HD. We removed it with Boot Camp Assistant and now when we try and re-install Windows (XP), the installations progresses until it hangs on a grey screen (we don't make it to BIOS) and we have to restart.
Additionally after the installation attempt, we can't get past the grey screen of death on startup (we get the startup noise - no apple logo) and have to use reset my Mac's PRAM and NVRAM to progress.
Also, after going through this process a Boot Camp disk image is created but it's empty.
Disk utility isn't detecting any problems. Could we have removed the partition incorrectly and something is jarring the process?

Mac Pro/ Leopard/ Boot Camp/ XP and 2 ATI Radeon XT1900 ????

Similar Messages

Maybe you are looking for