Mac Pro not seeing network login items

Hello
I have seen similar mentions of this issue, but no satisfactory answers- I have a Mac Pro on a windows network. I have put several networked drives in the the login items so they will auto-mount, but it is totally random which drives mount and which don't upon login. Some of them are different partitions of the same physical hard drive!
Of course the bootcamp (win XP) side sees the drives properly upon startup. I never have problems mounting these drives when I go to mount them from the finder.
Any Ideas?
Thanks
Doug

jewey4 wrote:
Everytime the computer starts up it says it can not find the Network but it will then load Raid 2 but not 1. If we wait about a minute, then we can manually login.
Yeah, me too. I have an Xserve dealing out 6 volumes to three workstations. I just added a Mac Pro tower. The other machines (Powerbook G4, Quicksilvers dual-gig & 733) mount networked volumes at login as per a longtime setup. Only the MacPro won't mount them properly.
It displays a "Connection failed . . . blahblahblah" dialog. Click OK and most -- not all -- the intended volumes instantly mount.
I reckon "too fast for the network" is the problem. (I tried changing MPro's network address from DHCP to static IP; no dice.) Tomorrow I'll try an Applescript that will run at login, mounting the volumes after a short time delay.

Similar Messages

  • Migration assistant screw up, Mac Pro not seeing wifi/TC

    Hi
    I've been using a MacBookPro (MBP) for almost 5 years now, with a 1TB Time Capsule (TC1) using Time Machine (TM). I am the sole user, HDD is 270Gb used/50Gb free; using Mavericks, v10.9.2. On Friday, I used Sophos anti virus home edition, to scan the MBP. It comes up with no threats identified, and I uninstall Sophos.
    Yesterday I took delivery of the Mac Pro (MP) with the 3Tb Time Capsule (TC3).
    I booted up the MP, with the TC3. I did not, at this stage, connect the TC3 to the internet. Using TM, I backed up the MP. TC3 flashes the amber light.
    Using Migration Assistant (MA) I tried to copy the MBP to the MP, 3 times. This did not work. At the point where the target machine has listed what is available to transfer, I click Continue and MA on the MP closes, on the MBP it says something like connection lost. The screen where this happens, lists 3 items available to transfer Application, Documents/Date and Computer settings; with a content of 128kb indicated, which is clearly wrong! The connection was an Ethernet cable direct from the MBP to the MP.
    At this stage, I decide to connect the MP to the internet using TC3, there's some settings to be changed on TC3 using Airport Utility and it connects ok. TC3 has a steady green light.
    I run 2 software updates on the MP. I surf the net briefly, to make sure it's ok.
    I try again to use MA. This time, the dialgoue box listing what's available to transfer is different. There are 2 or 3 more options, colour is present, the font is different, the box is about the same size. The MP would not let me take any screenshots as all other applications are closed when MA is running. I don't think it gave me the size of what was being transferred, but it looked more hopeful, so I Continue and the transfer starts, with an estimated time of 33 minutes.
    The transfer completes.
    The MBP, as you would expect, has not changed, the MP has, but not in the way I expected. Applications appear to have all transferred (without checking them), no Documents/data and no Downloads appear to have transferred; I ticked to transfer everything.;I know I can reconnect the Ethernet cable and simply copy the data across.
    But the main problem appears to be, the MP does not see the wifi.
    Ethernet cable is removed.
    The MP asks if I want to give permission to eeEvents manager (I presume calendar related) and say yes. It also asks if I want to install a Java run time, no.
    In System preferences/Network it tells me a new Thunderbolt bridge has been found and asks if it's ok, to accept it, yes. It tells me the Ethernet cable is disconnected, rightly so; it says Airport is not connected.
    I open Airport utility, no sign of the TC1 or TC3 despite it searching. Apart from TC1, the MP, MBP and TC3 are sat within a couple of feet of each other.
    I turn on TC1/TC3 (separately and not at the same time, then at the same time), but the MP does not see them. I've reset TC3, rebooted the MP and still the MP does not see it.
    I don't get any errors or warnings coming up.
    I think my next option is to try and reset the MP to the factory settings, but this won't work, as I've no internet connection to reinstall OS X. No disc is sent with the MP.
    Any suggestions as to what to try? Otherwise, I'll be off to the Apple Store tomorrow for a One to One!! :-(
    Thanks for any help and Happy Mother's Day!!  

    Take the MP and connect it via ETH to your main router.
    Restart the machine holding down command option R, you should see a spinning globe
    Open disk utility and reformat the MP HD as Mac journaled
    Then install OSX on this drive

  • How do I stop Adobe Bridge, Excel, Word and Adobe Photo Downloader from loading at startup under Mac OS 10.7.1, they are not loaded in login items.

    How do I stop Adobe Bridge, Excel, Word and Adobe Photo Downloader from loading at startup under Mac OS 10.7.1, they are not loaded in login items.

    When you shut down this window appears.
    Uncheck the reopen box and it should stop this from happening

  • I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

    I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
    How can I access and use documents and drawings created on the PC based computer ?

    Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier.  See this tip if you must go newer.  Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server.  I'm not sure if the new black Mac Pro supports that configuration or not.
    iPhoto, there is an iPhoto for all versions of Mac OS X.
    iTunes, there is an iTunes for all versions of Mac OS X.  Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature.  Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
    Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
    GIF - Viewing GIFs Apple's Preview can do that.  Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
    DMG is able to be opened by all versions of Mac OS X.  This are just "disk images" which store programs on a virtual disk that will open when double clicked.    Frequently you'll find the installer of the said program inside.  To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
    Otherwise see the resources on:
    https://discussions.apple.com/docs/DOC-2455
    If you end up deciding to stick with Snow Leopard.

  • Airport card not seeing networks after IP address clash

    Hi - I have a wireless network that works fine, just reset it up again and my two mac laptops connect perfectly well to it, as they always did. The reason I set it up again was that my desktop intel mac pro (my main computer) was giving an error message, that another device on my network had the same IP address as my Airport card, and that it therefore couldn't connect to my wireless network (which has been set up so that the various devices are given their own IP addresses automatically in Bridge Mode). I have never seen this before. I repeatedly tried 'renew DHCP lease' in system preferences - it had no effect so I set up the network again from scratch to see if that would help. Still nothing. The mac pro cannot see either of the two Airport Extremes in my network using airport utility and nor will it connect to the new network when I put in the name and password - again, I have tried repeatedly. The Airport icon in system preferences is orange.
    The airport card has never reported any problems and Apple hardware test (as well as the programme that came with Applecare) indicates that it's working normally. There are also no hardware problems with the Mac Pro according to the same tests.
    Does anyone on this forum know what I can do to connect the Mac Pro to the wireless network? (I don't have the option of trying to use it as the computer that sets up the network, as it's located a long way from the telephone connection, so that is done using Airport Utility via one of the laptops).

    Deleting the keychain with Keychain access worked.
    I still can't click on options nor see preferred networks, but now the new keychain I made is finally staying around after reboot and auto connecting me to my home network.
    Thank you for the help. I did accidentally delete ALL my keychains, but that's just as well as I probably had other clutter in there as well.

  • Mac can not see any printers.

    Mac can not see any printers.
    I have 2 other computers (1 windows / 1 Mac Book) using the printers just fine but once device can not even find a printer. Any ideas?
    Printer is Ricoh Aficio MP C3501
    The computer could not find the printers so I cleared them from system preferences. Updated everything, including downloading the most up to date driver, restarted and still can not see any printers.
    Thank you for your help,
    Darren D

    Hello ddelin,
    Welcome to the Apple Support Communities!
    I realize that two out of your three computers can see your printer, but one MacBook Pro will not. You have also done some great troubleshooting by deleting the printer, installing drivers, and trying to re-add the printer. If the issue continues, I would suggest resetting the printing system. Please use the attached article for more information.
    Troubleshooting printer issues in OS X - Apple Support
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Best regards,
    Joe

  • Mac can not see time capsule

    i bought Time capsule over Amazon .Air port works fine , but my mac can not see time capsule,,,sometime does , but most of the time not...
    It is a problem with time capsule i have 2 T new generation

    You don't mention what type of Mac you have, but is there any way you can move it around to see if that affects the problem?  If you hold down an "option" key while you pull down the AirPort/WiFi menu bar item, you should see a value labeled "RSSI" that is the strength of the wireless signal.   A value closer to zero is stronger.  For example, -30 is decent but -80 is poor.
    By the way, you don't seem to have declared any of your system details in your profile or didn't select your details to be included in your post.  Those can help people give you correct advice.  To update that, click on "Your Stuff" near the top of a window on these discussion groups, then on "Profile".  Scroll down to "My Products" and either edit an existing one or add a new one.

  • [URGENT] Mac Pro not booting, Fan error but fans are working.

    Hello,
    My server G5 is stuck on grey screen with spinning wheel. I ran the AHT and got the following:
    2FAN/4/8: CPU A INTAKE
    All the fans are spinning. I would really really appreciate if I can get any help or advice. I tried searching for this AHT error but could not find anything solid.
    This is our main server and its crucial to our organization and I am sweating bullets here.
    I reseted memory and unplugged all RAID drives. The three LED on the Logic board are Red, Yellow and Green; Power On, Trickle and Open Firmware respectively.
    Thanks for any help.

    Just to say that usually it helps to include the make/model of RAID controllers, whether it is hardware RAID or not. The Mac Pro Apple RAID card IS a PITA and is particular sometimes about drives and its battery reconditioning as well as mounting drives and time to create a hardware RAID5.
    When a drive causes trouble it is often though not always because of directory being damaged and OS X can't even inspect to see if there is a system or if it can be mounted.
    And because the G5 normally only has two SATA drives, to use three requires a bracket or something else to add drives, like Sonnet G5 Jive. And then a PCI SATA controller with internal ports. But that is just your average SATA controller.
    If it was a Mac Pro the thread could and should have been moved to another forum. And you still refer to this as a Mac Pro, not PowerMac. Which leads me to wonder.
    Molex y-splitters as needed in a G5 but three yrs for a set of drives, I'd say they were due for backup + erase/initialize and restore. Hopefully you kept them in shape with Disk Warrior during that time (don't rely on just Apple First Aid to maintain and repair/rebuild directories).

  • My mac does not see my printer

    my mac does not see my printer

    Is the printer physically connected to the computer with a cable, or is it wireless.  Did you install the printer drivers from the manufacturers web site, for your specific OS?

  • Is there a way to keep my Mac Pro On the network without sleeping???

    i'll try to explain this the best way I can. I often wish to access my Mac Pro over the network either for file sharing, or for use with Apple Remote Desktop. The problem is after about 20-30 minutes, the Mac Pro sleeps and disappears from the network. Is there a way to keep it on the network without turnig off sleep mode? I really don't want the hard drives working 24/7 if possible....
    Thanks in advance!
    JPT
    P.S. I'm sure it doesn't matter, but just in case..I'm using the new Apple Airport Extreme base station.

    In the Energy Saver pane of System Preferences, check the 'Wake for Ethernet network administrator access' checkbox under the Options tab, and then use an application such as this one to send it the signal.
    (19902)

  • Unable to connect to Mac Pro with 2 network interfaces

    The Mac Pro has 2 network interfaces. The first one is connected to a local network and the other interface has an external IP address (connected directly to the internet).
    What we want to be able to do is to connect to the computer from home through the external interface and then be able to run applications on it that access a server on the local network. But, from home it is showing "Offline" in the "Current Status" column. If we try to connect it fails.
    The thing I can't figure out is why I can access it from work on a different local network, using the external IP address. It works fine that way. There are no hardware firewalls that could be causing it. So either way, it is coming into the computer through the external adapter.
    I'm stumped... Maybe it's something simple that I'm just missing. If you have any idea how I can access the computer from home please let me know so I can try it.
    Thanks.

    Just installed TeamViewer and we're using that. Works great.

  • Screen dims randomly with Mac Pro - NOT a Macbook

    After upgrading to Mountain Lion, my screen will dim randomly when watching movies or YouTube.  This is on my early 2008 Mac Pro - not a Macbook Pro which seems to have this problem commonly.  I've searched and searched and lots of people have this problem with a Macbook Pro (battery saving feature or something) but there are no options to defeat screen dimming that I can find for a Mac Pro!! Mountain Lion just keeps getting worse and worse!
    HelP!

    Hello, thanks for taking the time to help me out!
    This is a 2008 MacPro (2x2.8 GHz Quad-Core Intel Xeon) running Mountain Lion OSX 10.8.4.
    I am running two monitors: a HannsG HH281 and a Hewlett PAckard HP w2408h.
    When this first was happening back in March 2013, I thought it had something to do with the ambient light sensor on the HP (the HannG doesnt have a light sensor), but it also might have has something to do with the dynamic contrast on the HannsG.  I had shut those features off, and I actually hadn't had this problem in a while and there has been a few Mountain Lion updates since then.
    I just tried to reproduce this by turning on/off the dynamic contrast on the Hanns G - did not get the problem
    again.  I also just turned the ambient light sensor on for the HP, and again, the problem did not occur.
    So it is hard to say if the problem is gone away or not or if it just is not showing itself at the time being?
    Here is the graphics card and display info from the System Profiler:
    ATI Radeon HD 2600 XT:
      Chipset Model:          ATI Radeon HD 2600
      Type:          GPU
      Bus:          PCIe
      Slot:          Slot-1
      PCIe Lane Width:          x16
      VRAM (Total):          256 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x9588
      Revision ID:          0x0000
      ROM Revision:          113-B1480A-252
      EFI Driver Version:          01.00.252
      Displays:
    HH281:
      Resolution:          1920 x 1200 @ 60 Hz
      Pixel Depth:          32-Bit Color (ARGB8888)
      Display Serial Number:          939LK3NA01178
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Rotation:          Supported
      Television:          Yes
    HP w2408:
      Resolution:          1920 x 1200 @ 60 Hz
      Pixel Depth:          32-Bit Color (ARGB8888)
      Display Serial Number:          3CQ8410GZF 
      Mirror:          Off
      Online:          Yes
      Rotation:          Supported
      Television:          Yes

  • Why would I get a Sudden Motion Sensor error on a Mac Pro (not a laptop)??

    Get this error all the time since upgrading to Logic 9.1.4.  Thing is, I have a Mac Pro, not a laptop.
    Apple sends me to this page:
    http://support.apple.com/kb/HT1934
    Should I disable sudden motion sensor?  Seems silly.  I am recording woth headphones, there's no movement from the computer.   And again, didn't have this error for 3 years and suddenly I get it after upgrading to 9.1.4?

    9.1.4 seems a bit shaky...
    That said, you might try disabling "Sleep" for the drive.
    As I recall, it's a generic error meaning the computer either isn't getting a response from the drive or that it can't pull data off fast enough.
    pancenter-

  • My mac can not see my iphone on airdrop! How can I fix it?

    My mac can not see my iphone on airdrop! How can I fix it?

    Hello Alexandre.alds,
    I'm sorry to hear you are having these issues with AirDrop on your devices. If you are having issues seeing other devices in AirDrop, you may want to double-check the steps and requirements outlined in the following articles:
    Using AirDrop with OS X Lion, Mountain Lion or Mavericks - Apple Support
    Share content with AirDrop from your iPhone, iPad, or iPod touch - Apple Support
    Sincerely,
    - Brenden

  • Itunes / mac mini not seeing ipod

    When I plug my ipod into the mac mini (usb) my mac doesn't recognize or see it. That means I can't update any songs on my ipod from my itunes library. I've tried:
    - resetting the ipod,
    - uninstalling and reinstalling itunes,
    - plugging the ipod directing into the usb port on the mini base and the monitor usb port,
    - putting the ipod in disk mode and
    Still my mac does not see the ipod.
    Upgraded to iTunes 7.2 a few weeks ago. It's been working fine the last couple of weeks.
    Please - help!!!

    All I can think of:
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

Maybe you are looking for