Mac Pro OSX 10.6.8 - Quicktime 7.6.6 too long to open only on one account

I have a Mac Proc with OSX 10.6.8.
I have downloaded Quicktime 7.6.6 from http://support.apple.com/kb/DL923  and installed it in the Applications-Utilities folder.
The application works fine when opened from my User account.
But, when I open Quicktime from my Admin account, the application takes 3 to 5 minutes to open, finder says that the application is not responding and the dock moves laterally signaling that there is a problem.
I should be most grateful if you could please help me to solve this problem.
Esther

Sorry - posted this in the wrong forum. Reposted in Mac Pro.

Similar Messages

  • Quicktime 7.6.6 under 10.6.8 too long to open only on one account

    I have a Mac Proc with OSX 10.6.8.
    I have downloaded Quicktime 7.6.6 from http://support.apple.com/kb/DL923  and installed it in the Applications-Utilities folder.
    The application works fine when opened from my User account.
    But, when I open Quicktime from my Admin account, the application takes 3 to 5 minutes to open, finder says that the application is not responding and the dock moves laterally signaling that there is a problem.
    I should be most grateful if you could please help me to solve this problem.
    Esther

    Really no one?

  • I have two iCloud accounts .mac and .me. My contacts are duplicated 2 and 3 times. I only want one account.

    Somehow, I ended up with two iCloud accounts. A .mac and a .me. I only need one but can not make the .me the primeray one (it tells me that the email is already in use). Anyways, I also have my contact records duplicated 2 and 3 times. I went to the Apple store in Beijing (I'm in China now) and they did not seem to know much about iCloud. They told me that I have to erase my contacts on the iPhone and iPad and then manually erase the duplicates. Is there another way to do it? How can I set up iCloud so that I only have one account?

    You can't delete an iCloud account.  You can, however, sign out of that account and just stop using it.  Then sign in to your second account on all devices account. 
    OT

  • How to delete photos with Zero KB size that were downloaded onto mac pro osx vers 10.5.8, 2x2.8 quad core intel Xeon ?

    How to delete picture files ( nikon NeF and jpeg )  with Zero  KB  size that were downloaded onto mac pro osx vers 10.5.8, 2x2.8 quad core intel Xeon
    -- have not been able to move them or move them to trash without  crashing  Finder  ?

    Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
    Try trashing them in Safe Mode, reply if that doesn't help.

  • I am not able to burn a cd   from my   mac pro osx  . it tells me no supported software. what do i do

    I am not able to burn a  CD  from my Mac pro OSX 10.6.3.  how do i download the software . the message i get is no supported software

    You need to update your Mac OS X to at least 10.6.8.
    Apple menu > Software update.

  • Dear   can anyone help me on how I can change my mac pro (OSX Version 10.9.5) language from Spanish to English?

    Dear   can anyone help me on how I can change my mac pro (OSX Version 10.9.5) language from Spanish to English?

    System Preferences > Language & Text > Language.

  • Is it possible to upgrade my Mac Pro OSX 10.7.5 to OSX 10.8?

    Is it possible to upgrade my Mac Pro OSX 10.7.5 to OSX 10.8?
    Processor  2 x 3 GHz Quad-Core Intel Xeon
    Memory  8 GB 667 MHz DDR2 FB-DIMM
    Graphics  NVIDIA Quadro FX 4500 512 MB
    Software  Mac OS X Lion 10.7.5 (11G63b)

    Choose About this Mac from the Apple menu, click on More Info, and check the model identifier against MacPro3,1, which is the earliest Mac Pro that can run Mountain Lion and newer.
    (125398)

  • Ipad mini not recognised by Mac Pro (OSX 10.6.4)

    I have an ipad mini (6.1.3) I have connected it to my Mac Pro (OSX 10.6.4) via the thunderbolt/USB lead supplied. The device is not recognised in the finder or in itunes, though it does charge via this port. Is this an issue with my OS version? My itunes version? Is there a simple fix?

    An iPad isn't designed to mount as a drive in Finder, it should only appear in iTunes and (if you have photos on the iPad that were taken with it, copied it to it via camera kit, saved from emails/websites) then it should also appear in iPhoto, Image Capture and Aperture so that you can copy them off.
    But I think that you need iTunes 10.7+ to sync an iPad Mini running iOS 6, which I think requires OS X 10.6.8+

  • Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print. It did until quite recently . Now I get Filter failed and RastertoescpII when i try to print ( test sheets ok) . Have tried to to uninstall and reinstall but nothing. Any advice, please.

    Question ?
    Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print.
    It did until quite recently . However now I get filter failed and RastertoescpII and pages of items when i try to print .
    Print head test sheets/head cleaning etc ok  .
    Have tried to to uninstall and reinstall but nothing.
    Any advice, please?.
    ps
    The printer deos not show up on Epsons site but i think I have the software from Apple.
    Not an ideal situation.

    Try a reset >  OS X Mountain Lion: Reset the printing system

  • Grab stopped working on mac 10.6.8 - cant find library/preferences, it is no longer in utilities - only the icon remains unuseable in the dock.

    Grab stopped working on mac 10.6.8 - cant find library/preferences, it is no longer in utilities - only the icon remains unuseable in the dock. Can anyone help?

    Folks- I got After Effects to launch by installing OS X 10.8. I did not figure out the problem and am not certain it won't pop up again.

  • Hi plz help me here .. I update my macbook air running with Mac 10.8.5 to yosemite and it will take too long to shut down and when stars it will like its gonig update?

    Hi plz help me here .. I update my macbook air running with Mac 10.8.5 to yosemite and it will take too long to shut down and when stars it will like its gonig update?

    More information would be helpful.

  • Applications launching extremely slowly - Mac Pro, OSX 10.6.8

    Hi,
    I have tried everything I can think of but perhaps some of the experienced people on this forum have seen this before. I have a Mac Pro about a year old and everything was running fine until about 2 weeks ago. The applications take extremely long to start up and settle down but eventually they do. Entourage, for example, takes 10 minutes or longer. The computer boots normally though.
    Once everything has settled down they seem to run just fine but starting any new application will take a very long time. The curious thing is that after boot the first couple of applications seems to load up a usual but after that things slow down. I can't detect anything unusual in the activity monitor and the affected apps show up as "not responding" but if you wait long enough that notification goes away and they seem to work fine.
    I have firewire connected to a Protools Digi 002 rack and Ethernet connected to a Time Capsule, USB connections are a 24" Cinema display and mouse.
    The machine is an 8 Core 2.4 Ghz, 6 GB RAM (4.36 GB free ), 1TB HD (700 GB Free)
    This is what I have done to attempt a fix:
    Restore from a Time Machine backup from several days prior to the start of the incident (1 week ago). 
    Re-install OSX 10.6.8 combo update 
    Delete and restore various applications (like MS Office 2008). 
    PRAM/SMC reset 
    Techtool Pro complete test suite scan including disk surface scan, directory rebuild and optimization 
    Flush the Cache 
    Rebuild Permissions (several times)
    So far nothing has solved the issue. My next step was to try here and then do a complete re-install from the ground up (erase HD, install OSX, install applications). I didn't want to take that step unless there was no other alternative because it is a pain.
    Also it does not answer the question of "what is wrong" so I can avoid it again so if anyone has any clues/suggestions/sage advice I would greatly appreciate it.
    Cheers,
    JdanS

    Hi Linc,
    Thanks for the suggestion. I forgot to add that to my bullet point list (I tried it already) but to be thorough I followed the steps again.
    The results are the same but while I was waiting for Entourage to load (23 minutes this time btw) I ran a sample on the process under the activity monitor.
    Not sure if this adds any value but here is the output:
    Sampling process 164 for 3 seconds with 1 millisecond of run time between samples
    Sampling completed, processing symbols...
    Analysis of sampling Microsoft Entourage (pid 164) every 1 millisecond
    Call graph:
        2759 Thread_1492   DispatchQueue_1: com.apple.main-thread  (serial)
          2759 start
            2759 _start
              2759 main
                2759 LApplication::Run()
                  2759 LApplication::ProcessEvents()
                    2759 RunApplicationEventLoop
                      2759 ToolboxEventDispatcher
                        2759 SendEventToEventTarget
                          2759 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*)
                            2759 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
                              2759 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)
                                2759 SendEventToEventTargetWithOptions
                                  2759 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*)
                                    2759 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
                                      2759 EventLoopEventHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)
                                        2759 LApplication::PostProcessEventsRAEL(OpaqueEventRef*, OpaqueEventTargetRef*, unsigned char)
                                          2759 LPeriodical::DevoteTimeToIdlers(EventRecord const&)
                                            2759 RegisterWithSAUIdler::SpendTime(EventRecord const&)
                                              2759 McpRegisterWithAutoUpdate
                                                2759 MAU_Startup
                                                  2759 mau::MAST_FindTool(__CFString const*, __CFString const*)
                                                    2759 mau::FindToolInternal(short, __CFString const*, __CFString const*)
                                                      2759 FSFindFolder
                                                        2759 FindFolderGuts
                                                          2759 ResolveRelativeFolder
                                                            2759 FindFolderGuts
                                                              2759 ResolveRelativeFolder
                                                                2759 GetFolderSubFolder
                                                                  2759 FSMakeFSRefUnicode
                                                                    2759 PBMakeFSRefUnicodeSync
                                                                      2759 GetFSRefAttributes(FSMount*, FSRefPrivate const*, unsigned long, FSAttributeInfo*, unsigned long, char*)
                                                                        2759 FSMount::getattrs(unsigned long, char const*, unsigned long, unsigned long, FSAttributeInfo*, unsigned long, unsigned char*)
                                                                          2759 FSMount::_getattrs(unsigned long, char const*, unsigned long, unsigned long, FSAttributeInfo*, unsigned long, unsigned char*)
                                                                            2759 FSMount::getattrscore(bool, char const*, unsigned long, char const*, unsigned long, FSAttributeInfo*, unsigned long, unsigned char*)
                                                                              2759 open$UNIX2003
        2759 Thread_1503   DispatchQueue_2: com.apple.libdispatch-manager  (serial)
          2759 start_wqthread
            2759 _pthread_wqthread
              2759 _dispatch_worker_thread2
                2759 _dispatch_queue_invoke
                  2759 _dispatch_mgr_invoke
                    2759 kevent
        2759 Thread_2172
          2759 thread_start
            2759 _pthread_start
              2759 ExceptionHandlerThreadProc(void*)
                2759 mach_msg
                  2759 mach_msg_trap
        2759 Thread_2671
          2759 thread_start
            2759 _pthread_start
              2759 PrivateMPEntryPoint
                2759 TCPListener(void*)
                  2759 FWaitForConnection
                    2759 accept
                      2759 accept$NOCANCEL$UNIX2003
        2759 Thread_2672
          2759 thread_start
            2759 _pthread_start
              2759 PrivateMPEntryPoint
                2759 BroadcastListener(void*)
                  2759 FReceiveMessage
                    2759 recvfrom
                      2759 recvfrom$NOCANCEL$UNIX2003
        2759 Thread_2673
          2759 thread_start
            2759 _pthread_start
              2759 PrivateMPEntryPoint
                2759 BroadcastSender(void*)
                  2756 MPWaitOnSemaphore
                    2756 semaphore_timedwait_trap
                  1 FGenerateBroadcastHash(unsigned char const*, unsigned char const*, unsigned char*)
                    1 FGenerateHashCore(unsigned char const*, unsigned char const*, unsigned long, unsigned char*)
                      1 BatteryCount
                        1 IOPMCopyBatteryInfo
                          1 IOServiceGetMatchingServices
                            1 io_service_get_matching_services
                              1 mach_msg
                                1 mach_msg_trap
                  1 FGetMACAddress(unsigned char*)
                    1 MopRcfdCopyEthernetMACAddress
                      1 IOServiceGetMatchingServices
                        1 io_service_get_matching_services
                          1 mach_msg
                            1 mach_msg_trap
                  1 UsingPPP
                    1 SCNetworkCheckReachabilityByAddress
                      1 SCNetworkReachabilityCreateWithAddress
                        1 __SCNetworkReachabilityCreatePrivate
                          1 _CFRuntimeCreateInstance
                            1 malloc_zone_malloc
                              1 szone_malloc_should_clear
                                1 tiny_malloc_from_free_list
    Total number in stack (recursive counted multiple, when >=5):
    Sort by top of stack, same collapsed (when >= 5):
            mach_msg_trap        2761
            accept$NOCANCEL$UNIX2003        2759
            kevent        2759
            open$UNIX2003        2759
            recvfrom$NOCANCEL$UNIX2003        2759
            semaphore_timedwait_trap        2756
    Sample analysis of process 164 written to file /dev/stdout

  • 2006 Mac Pro (OSX 10.7.5) and USB 3 speeds

    I'm considering the purchase of a HighPoint RocketU 1144CM USB 3.0 PCIe card and would like to know if there's anything in the architecture of my 2006 Mac Pro [Build 1,1] which might limit throughput speeds to USB2 standards. The manufacturer's [HighPoint] website claims compatibility with OSX 10.7.5 (my current operating system) but does not make any mention of the year in which the computer was built. Will I be able to obtain USB 3.0 speeds or would I just be wasting my money? Any insight would be greatly appreciated. Thanks.

    There have been more limitations and choices in support for even the 2008 and earlier.
    Chipsets change, some use drivers and drivers that support 32-bit kernel and a smaller number of users, have hampered choice.
    I was using two Sonnet SATA II controllers, the E2P and the E4P. Those worked and of course speed was fine, as was ejecting, sleep and other features and behavior.  The Allegro has probably changed over the years and there are cheaper alternatives.
    www.xlr8yourmac.com does have readers reports in a database and write-ups.
    It has also been discussed here many many times, and on MacRumors forum for the Mac Pro.
    What is the state of USB 3.0 on Mac Pro?  (  1 2 3 4 5 6 ... Last Page)
    Highpoint can be iffy in support. As to USB2 speeds, only if the device(s) are a factor, and Allegro does not support hubs or non-storage devices (phone, tablet, card readers etc)

  • How can I disable mac pro OSX 'spaces' shortcut keys? (i.e. CTL, Right Arrow)

    How can I disable mac pro shortcut keys: CTL right arrow, CTL left arrow, CTL up arrow, CTL down arrow? Currently, they take me from one space to another. (OSX 10.6) Goal is to use these shortcuts for text editing.

    Hi, Simon.
    You can instruct iTunes and iPhoto to save their respective libraries to a different disk, e.g. your second hard drive. You can also move existing libraries for these apps to a drive other than your startup disk.
    See the links concerning moving these libraries cited in the "More ways to save space if you have a spare partition or second hard drive" section of my "Freeing Space on your Mac OS X startup disk" FAQ.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Brand new to forum.  Can a Maxtor IV One Touch external hard drive previously used on a PC be formatted to work with my Mac Pro OSX  version 10.6.8?

    I've never participated in a forum before; so, please let me know if I'm going about it wrong.
    My question is this:  Can a Maxtor One Touch 4 external hard drive that was previously used on a PC be set up for use on my Mac Pro?  I'm preparing to upgrade the Mac to the most recent software version and it was suggested I back everything up first.
    I reformatted the hard drive so it is currently empty.  There are icons on my Mac desktop for One Touch 4 and Maxtor Manager but other than that nothing appears to be working.  There are no drives showing in the Maxtor Manager so I suspect that's where I need to start.  However, I don't know enough about what I'm doing to move ahead on my own and I don't want to screw anything up.  If anyone knows the steps I should take next, I'd sure appreciate hearing from you.

    I am embarrassed how simple that was.  I did warn you that I'm technologically challenged; I'm pretty sure that proved it.
    The external hard drive is formatted as Mac OS Extended (Journaled). The link you provided indicates the external drive will work with Time Machine.  I've never worked with Time Machine and don't know what my next step should be.  Would you please walk me through it?
    Your help is greatly appreciated.  From the points you have accumulated, I can tell you have helped many others and I thank you for your generosity.

Maybe you are looking for

  • HT4623 please help?

    I bought a iphone 3g from a friend and i dont know how to update ios 5 and 6 because i dont have the setting in my phone and it wont let me download any apps tell i have it updated. someone please help?

  • Y axis auto scale not working in DIAdem 11

    Hi A few years ago I created a user dialog box for selecting and displaying channels in DIAdem view. It worked fine for all DIAdem 10.X releases, but for DIAdem 11.X there is a problem with the y-axis scaling. The channels are displayd as [n  Systems

  • Hard drive won't mount - but only on one Macbook Pro

    Hi guys So I have a brand new Macbook Pro 2.4 with retina and 8gb (like 2 days old). I'm on Mavericks. This question also concerns a Lacie Rugged USB3 1TB drive, it is bus power only. My lacie won't mount on my new mac. An identical lacie will, as wi

  • Premiere Elements capturing video in one piece instead of clips

    I am saving all of my old SVHS tapes to the computer using an ADVC-55 capture card via fire wire and Premiere Elements 12 When the video has captured the entire tape and I go to view, I have noticed that It would save the captured video in clips and

  • Media manager mess

    Am encountering an issue with "media manager" in FCP. I wanted to create one master file for my latest project with all relevant clips and resources, so i made a "copy" of the project in media manager and then chose to "delete" (though not permanentl