Mac Pro OSX 10.8.3 HP 4000 series scanners are not detecting.
Well..I think, I did everything. I have followed all instructions recommended by HP. I have updated and installed latest drivers. I have even searched the warez sites to find a trick. Useless, useless and useless.
Hardware is retina display with 256 GB SSD, 1600 mGz 8 GB ram and I7 processor. OSX version is 10.8.3
HP 4000 series scanners are not detecting by this machine. Vuescan is detecting but the scanning quality is also terrible.
Strange. I have nothing to say.
For the Scanjet 4850, follow the link below and click on the instructions tab. It looks like you have to get the software and drivers for 10.6 and run a patch to make them work with 10.8. That should get the scanner installed and working.
Scanjet Software Patch to Use OS X 10.6 Software and Driver on OS X 10.7 and 10.8
For the Scanjet G4050, all you should need to do is install the driver from the link below to be able to use the scanner with image capture and other similar products.
HP Scanjet ICA Software for Mac OS X 10.6.8, 10.7 or 10.8
Let me know what happens.
I am a printer tech for HP.
Similar Messages
-
Have purchased Apple TV. Set up was OK (saw the wifi router and finalised with getting into itunes - but only purchased items)
Want to use the Apple TV to view my mac pro screen to use itunes (selection of ANY of my songs) and to display images from my photo folders (mirroring)
Can not see the 'airplay' icon!!!!??Here is a list of requirements for AirPlay Mirroring: http://support.apple.com/kb/ht5404
-
How to delete picture files ( nikon NeF and jpeg ) with Zero KB size that were downloaded onto mac pro osx vers 10.5.8, 2x2.8 quad core intel Xeon
-- have not been able to move them or move them to trash without crashing Finder ?Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
Try trashing them in Safe Mode, reply if that doesn't help. -
I am not able to burn a cd from my mac pro osx . it tells me no supported software. what do i do
I am not able to burn a CD from my Mac pro OSX 10.6.3. how do i download the software . the message i get is no supported software
You need to update your Mac OS X to at least 10.6.8.
Apple menu > Software update. -
Dear can anyone help me on how I can change my mac pro (OSX Version 10.9.5) language from Spanish to English?
System Preferences > Language & Text > Language.
-
Is it possible to upgrade my Mac Pro OSX 10.7.5 to OSX 10.8?
Is it possible to upgrade my Mac Pro OSX 10.7.5 to OSX 10.8?
Processor 2 x 3 GHz Quad-Core Intel Xeon
Memory 8 GB 667 MHz DDR2 FB-DIMM
Graphics NVIDIA Quadro FX 4500 512 MB
Software Mac OS X Lion 10.7.5 (11G63b)Choose About this Mac from the Apple menu, click on More Info, and check the model identifier against MacPro3,1, which is the earliest Mac Pro that can run Mountain Lion and newer.
(125398) -
Ipad mini not recognised by Mac Pro (OSX 10.6.4)
I have an ipad mini (6.1.3) I have connected it to my Mac Pro (OSX 10.6.4) via the thunderbolt/USB lead supplied. The device is not recognised in the finder or in itunes, though it does charge via this port. Is this an issue with my OS version? My itunes version? Is there a simple fix?
An iPad isn't designed to mount as a drive in Finder, it should only appear in iTunes and (if you have photos on the iPad that were taken with it, copied it to it via camera kit, saved from emails/websites) then it should also appear in iPhoto, Image Capture and Aperture so that you can copy them off.
But I think that you need iTunes 10.7+ to sync an iPad Mini running iOS 6, which I think requires OS X 10.6.8+ -
On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?
What version of Mac OS X?
What home page?
What browser? -
i had a mac pro system..from last 2 days the keyboard is not working properly..if i typed a key but it displayed 2 or 3 keys..what is the problem? is keyboard gone..?
Hey ynareshbabu,
Thanks for the question. I understand you are having issues with your keyboard. The following article provides some great troubleshooting steps:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/TS1381
You may want to refer to the "Some keys don't work as expected" section.
Thanks,
Matt M. -
Can't install dreamweaver on new mac air osx Keep getting message Update failed This patch is not applicable to you.
Dreamweaver download prob which version of Dreamweaver are you trying to install? What version of Mac OS do you have installed on your new MacBook Air? Finally what specific update is failing?
-
My Mac pro is in off mode permanently: black screen, no light (not even the cable), not sound...just dead! I bought it 3 months ago and this is disappointing. Any advice?
Reset the SMC and then test: http://support.apple.com/kb/HT3964
Otherwise as the other folks indicated, its time for diagnostics / service. Make an appointment with a Mac Genius at an Apple store, contact AppleCare via phone, or contact an Apple Authorized Service Provider for assistance. -
'''My bookmarks used to appear in dropdown menu from the address bar on my iMac G5. I switched to Mac Notebook & from Leopard to Lion. Now my bookmarks are not accessible from the address bar anymore (the line where you type in the website address)'''
There appears to be a problem with Firefox 20 with UNC paths when using roaming profiles on a server.
*[[/questions/955140]] why is the 20.0 address bar unresponsive?
This is currently investigated and tracked via this bug report.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=857672 bug 857672] - Address Bar not working (roaming profiles;UNC path support OS.File)
<i>(please do not comment in bug reports: [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html])</i> -
Applications launching extremely slowly - Mac Pro, OSX 10.6.8
Hi,
I have tried everything I can think of but perhaps some of the experienced people on this forum have seen this before. I have a Mac Pro about a year old and everything was running fine until about 2 weeks ago. The applications take extremely long to start up and settle down but eventually they do. Entourage, for example, takes 10 minutes or longer. The computer boots normally though.
Once everything has settled down they seem to run just fine but starting any new application will take a very long time. The curious thing is that after boot the first couple of applications seems to load up a usual but after that things slow down. I can't detect anything unusual in the activity monitor and the affected apps show up as "not responding" but if you wait long enough that notification goes away and they seem to work fine.
I have firewire connected to a Protools Digi 002 rack and Ethernet connected to a Time Capsule, USB connections are a 24" Cinema display and mouse.
The machine is an 8 Core 2.4 Ghz, 6 GB RAM (4.36 GB free ), 1TB HD (700 GB Free)
This is what I have done to attempt a fix:
Restore from a Time Machine backup from several days prior to the start of the incident (1 week ago).
Re-install OSX 10.6.8 combo update
Delete and restore various applications (like MS Office 2008).
PRAM/SMC reset
Techtool Pro complete test suite scan including disk surface scan, directory rebuild and optimization
Flush the Cache
Rebuild Permissions (several times)
So far nothing has solved the issue. My next step was to try here and then do a complete re-install from the ground up (erase HD, install OSX, install applications). I didn't want to take that step unless there was no other alternative because it is a pain.
Also it does not answer the question of "what is wrong" so I can avoid it again so if anyone has any clues/suggestions/sage advice I would greatly appreciate it.
Cheers,
JdanSHi Linc,
Thanks for the suggestion. I forgot to add that to my bullet point list (I tried it already) but to be thorough I followed the steps again.
The results are the same but while I was waiting for Entourage to load (23 minutes this time btw) I ran a sample on the process under the activity monitor.
Not sure if this adds any value but here is the output:
Sampling process 164 for 3 seconds with 1 millisecond of run time between samples
Sampling completed, processing symbols...
Analysis of sampling Microsoft Entourage (pid 164) every 1 millisecond
Call graph:
2759 Thread_1492 DispatchQueue_1: com.apple.main-thread (serial)
2759 start
2759 _start
2759 main
2759 LApplication::Run()
2759 LApplication::ProcessEvents()
2759 RunApplicationEventLoop
2759 ToolboxEventDispatcher
2759 SendEventToEventTarget
2759 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*)
2759 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
2759 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)
2759 SendEventToEventTargetWithOptions
2759 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*)
2759 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
2759 EventLoopEventHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)
2759 LApplication::PostProcessEventsRAEL(OpaqueEventRef*, OpaqueEventTargetRef*, unsigned char)
2759 LPeriodical::DevoteTimeToIdlers(EventRecord const&)
2759 RegisterWithSAUIdler::SpendTime(EventRecord const&)
2759 McpRegisterWithAutoUpdate
2759 MAU_Startup
2759 mau::MAST_FindTool(__CFString const*, __CFString const*)
2759 mau::FindToolInternal(short, __CFString const*, __CFString const*)
2759 FSFindFolder
2759 FindFolderGuts
2759 ResolveRelativeFolder
2759 FindFolderGuts
2759 ResolveRelativeFolder
2759 GetFolderSubFolder
2759 FSMakeFSRefUnicode
2759 PBMakeFSRefUnicodeSync
2759 GetFSRefAttributes(FSMount*, FSRefPrivate const*, unsigned long, FSAttributeInfo*, unsigned long, char*)
2759 FSMount::getattrs(unsigned long, char const*, unsigned long, unsigned long, FSAttributeInfo*, unsigned long, unsigned char*)
2759 FSMount::_getattrs(unsigned long, char const*, unsigned long, unsigned long, FSAttributeInfo*, unsigned long, unsigned char*)
2759 FSMount::getattrscore(bool, char const*, unsigned long, char const*, unsigned long, FSAttributeInfo*, unsigned long, unsigned char*)
2759 open$UNIX2003
2759 Thread_1503 DispatchQueue_2: com.apple.libdispatch-manager (serial)
2759 start_wqthread
2759 _pthread_wqthread
2759 _dispatch_worker_thread2
2759 _dispatch_queue_invoke
2759 _dispatch_mgr_invoke
2759 kevent
2759 Thread_2172
2759 thread_start
2759 _pthread_start
2759 ExceptionHandlerThreadProc(void*)
2759 mach_msg
2759 mach_msg_trap
2759 Thread_2671
2759 thread_start
2759 _pthread_start
2759 PrivateMPEntryPoint
2759 TCPListener(void*)
2759 FWaitForConnection
2759 accept
2759 accept$NOCANCEL$UNIX2003
2759 Thread_2672
2759 thread_start
2759 _pthread_start
2759 PrivateMPEntryPoint
2759 BroadcastListener(void*)
2759 FReceiveMessage
2759 recvfrom
2759 recvfrom$NOCANCEL$UNIX2003
2759 Thread_2673
2759 thread_start
2759 _pthread_start
2759 PrivateMPEntryPoint
2759 BroadcastSender(void*)
2756 MPWaitOnSemaphore
2756 semaphore_timedwait_trap
1 FGenerateBroadcastHash(unsigned char const*, unsigned char const*, unsigned char*)
1 FGenerateHashCore(unsigned char const*, unsigned char const*, unsigned long, unsigned char*)
1 BatteryCount
1 IOPMCopyBatteryInfo
1 IOServiceGetMatchingServices
1 io_service_get_matching_services
1 mach_msg
1 mach_msg_trap
1 FGetMACAddress(unsigned char*)
1 MopRcfdCopyEthernetMACAddress
1 IOServiceGetMatchingServices
1 io_service_get_matching_services
1 mach_msg
1 mach_msg_trap
1 UsingPPP
1 SCNetworkCheckReachabilityByAddress
1 SCNetworkReachabilityCreateWithAddress
1 __SCNetworkReachabilityCreatePrivate
1 _CFRuntimeCreateInstance
1 malloc_zone_malloc
1 szone_malloc_should_clear
1 tiny_malloc_from_free_list
Total number in stack (recursive counted multiple, when >=5):
Sort by top of stack, same collapsed (when >= 5):
mach_msg_trap 2761
accept$NOCANCEL$UNIX2003 2759
kevent 2759
open$UNIX2003 2759
recvfrom$NOCANCEL$UNIX2003 2759
semaphore_timedwait_trap 2756
Sample analysis of process 164 written to file /dev/stdout -
2006 Mac Pro (OSX 10.7.5) and USB 3 speeds
I'm considering the purchase of a HighPoint RocketU 1144CM USB 3.0 PCIe card and would like to know if there's anything in the architecture of my 2006 Mac Pro [Build 1,1] which might limit throughput speeds to USB2 standards. The manufacturer's [HighPoint] website claims compatibility with OSX 10.7.5 (my current operating system) but does not make any mention of the year in which the computer was built. Will I be able to obtain USB 3.0 speeds or would I just be wasting my money? Any insight would be greatly appreciated. Thanks.
There have been more limitations and choices in support for even the 2008 and earlier.
Chipsets change, some use drivers and drivers that support 32-bit kernel and a smaller number of users, have hampered choice.
I was using two Sonnet SATA II controllers, the E2P and the E4P. Those worked and of course speed was fine, as was ejecting, sleep and other features and behavior. The Allegro has probably changed over the years and there are cheaper alternatives.
www.xlr8yourmac.com does have readers reports in a database and write-ups.
It has also been discussed here many many times, and on MacRumors forum for the Mac Pro.
What is the state of USB 3.0 on Mac Pro? ( 1 2 3 4 5 6 ... Last Page)
Highpoint can be iffy in support. As to USB2 speeds, only if the device(s) are a factor, and Allegro does not support hubs or non-storage devices (phone, tablet, card readers etc) -
Mac Pro OSX 10.6.8 - Quicktime 7.6.6 too long to open only on one account
I have a Mac Proc with OSX 10.6.8.
I have downloaded Quicktime 7.6.6 from http://support.apple.com/kb/DL923 and installed it in the Applications-Utilities folder.
The application works fine when opened from my User account.
But, when I open Quicktime from my Admin account, the application takes 3 to 5 minutes to open, finder says that the application is not responding and the dock moves laterally signaling that there is a problem.
I should be most grateful if you could please help me to solve this problem.
EstherSorry - posted this in the wrong forum. Reposted in Mac Pro.
Maybe you are looking for
-
I'm looking for a way to connect a laptop with screwless VGA to a tv that only has rca?
-
MS 2000 Sql Index Hint In CFC Query
How do you force the query in your function (component) to use the Index created. If you have some thing like this select * from class and a bunch of where clauses. Does CF allow for hints in the CFC's queries? any example?
-
I can use my Linksys & MBP wirelessly. The problem is I cant connect to the network with security enabled on the router. I have tried 128 bit WEP. Not sure what to do? Anyone with ideas?
-
How to generate a csv report to determine paper size in a pdf or pdf/a file ?
how to generate a csv report to determine paper size in a pdf or pdf/a file ?
-
What is the order of SPLinks returned by SPFile.BackwardLinks?
The SPFile.BackwardLinks returns a Microsoft.SharePoint.SPLinkCollection collection of links of objects that consume the current SPFile object as a link. For example, I have a document in a library that has a link to it on three site pages. Doing SPF