Mac Pro Power Up failure - Mac Pro goes on and off

Since few months my Mac Pro first generation (2x 2.66 GHz Dual core 8 GB RAM with ATI Radeon XT1900X 512 Mb video card) frequently does not start up. When pushing the power button it starts up and in few seconds turns off again. I have reset the SMC, done a hardware test for RAM etc. The machine has had a dure test at a service provider but the problem was not found.
Few weeks ago the problem began again and sometimes the Mac Pro starts up normal and sometimes the problem occurs again. And sometimes the Mac Pro goes of spontaniously. Can this be the Video card causing this problem? The RAM seems to be OK, cause I replaced the 4x 2xGB DIMMS with the older 2x 512 MB DIMMS that came with the Mac Pro and the same problem occurs.
Has anyone has this problem and/or knows a solution?

I just starting having this problem today. I turned on my Mac Pro this morning and after a few seconds it shut down and then restarted. It kept doing that so I finally unplugged the computer. Prior to today the computer would sometimes shutdown or restart on it's own but I could usually get it boot back up and was able to use the computer. It's still unplugged and I'll leave it that way until I get home from work today. I did open up the case and blasted out as much of the dust that's built up with a can of compressed air. I've read about resetting the SMC but can I do that if the computer keeps restarting after a few seconds? I have AppleCare for the Mac Pro should I just set up an appointment and take it in? I worried that it may be an issue with the power supply. Any suggestions? I appreciate the assistance!!!
Thanks!!

Similar Messages

  • HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

    HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

    System Preferences > Displays.
    De-select "Automatically adjust brightness"

  • Controlled outlets going on and off on APC Battery Backup UPS 1080

    This may be a strange place to report this issue (I have posted it in the APC forums) but I am wondering if anyone here has an idea.... because the behavior seems indicative of my iMac cycle awake and asleep again.
    I have a  Backup UPS NS 1080 made by APC. There is some strange behavior with the controlled outlets since I have upgraded to Mac OSX Yosemite. I have set the threshold repeatedly (twice with the tutelage of APC support folks on the phone). The second time we plugged a floor lamp into the controlled outlet and it went on and off repeatedly after we set the threshold. I have set the threshold both with the computer (a late 2013 iMac)  asleep and turned off. Yet, nothing seems to work. APC thought perhaps the unit was faulty and replaced it, but the problem persists with the new unit... computer asleep and the controlled outlet(s) are going on and off. Only a problem because I have the computer speakers plugged into one of the controlled outlets and I can hear the subwoofer loudly "pop" when it turns on and off while the computer is asleep... a pain.
    Any ideas how to resolve this?
    Thanks.

    You could overload the circuit, but your MP has 865W PSU and needs more 1200VA or above.
    Don't overload a circuit, and don't have an A/C or your fridge on the circuit. Not sure what you can do or get an extension cord designed for window air conditioner (15A , flat, grounded, and very heavy duty).
    Take a look at APC knowledge base perhaps. Or put the fridge on a line conditioner??? more to keep any noise or to reduce the effect of its power cycling. Old? new? check it with one of those Kill-A-Watt devices and see what is pulls.
    Take a look and there are excellent threads on UPS all the time. Yes, you need to upgrade to APC's RS1500VA or you could go with the LCD RS1300VA.
    Personally, I have an older XS1500 for peripherals that use to handle my G4, and RS1500 that handles MP and monitor, router. Both are on a new circuit but using two plugs on same outlet, but nothing else on this circuit.
    Oh, and audio and such... keeping RFI and noise should be essential, no?

  • My MBP mid 2010 display blackout and froze while working but my keyboard light will still light up. Won't be able to retrieve it and have to hard shutdown. Sometimes it happens a lot. Wether it connected to power or not, it will blackout on and off. Pleas

    My MBP mid 2010 display blackout and froze while working but my keyboard light will still light up. Won't be able to retrieve it and have to hard shutdown. Sometimes it happens a lot. Wether it connected to power or not, it will blackout on and off. Please advice what shall I do.

    Do you have a 15" mid-2010? If so then your problem is surely...
    Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
    If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
    Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
    Kernel Extensions in backtrace (with dependencies):
             com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
                dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
                dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
             com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
                dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
             com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
                dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
    Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
    So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. The unfortunate thing is that many people have passed the “three years from date of purchase” now and Apple is not honoring the free logic board replacement for many users. Some dealers seem to be making some exceptions for those past the three year mark, but don’t count on it…
    Good luck,
    Clinton

  • HT4543 Audible fan sounds (noise). Nothing is blocking the vents and the temperature in the room is normal. Fan goes on and off, sometimes on for a minute.

    Audible fan sounds (noise). Nothing is blocking the vents and the room temp. is normal. Fan sound goes on and off but this morning the sound came on for well over a minute.

    Since you don't say how old your iMac is, have you cleaned out the dust? Dust buildup can lead to over heating issues. Remove any and all things plugged into it including the power cord, Remove the RAM access grille. Vacuum all openings starting with the RAM access area (air intake). Vacuum all ports and plugs, DVD slot and the opening across the top of the rear of the body. Blow compressed air through all your openings and vacuum again to remove any dust you loosend. Reinstall the RAM grille. Plug in the keyboard and mouse if not blue tooth. Insert power cord...
    You are now in a perfect position to do a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    It is the 5 second timing that initiates the reset.
    Here is a Widget to monitor your temps and other operations:
    http://islayer.com/apps/istatpro/

  • How can you watch itunes purchased movies on apple tv. A click on to movies then into purchase thn a click on a movie i want to watch then my apple tv box light starts going on and off plus the screen is blank

    How can you watch itunes purchased movies on apple tv. A click on to movies then into purchase thn a click on a movie i want to watch then my apple tv box light starts going on and off plus the screen is blank

    JasonFromSK wrote:
    With the newest Airport firmware (7.6.1), it seems I should be able to do this.
    Really? I need to check that out!
    You should certainly be able to add content by reference to itunes from such a disk (even before the update) - so long as itunes knows the location of the file (set Preferences not to copy to local library when adding the media) it will stream it to AppleTV if the disk is available.
    I hope you're right, but I'd be surprised if current Extremes can be upgarded to provide a full Home Sharing service - marvellous if they can but I'd be surprised as i've long said we need an Apple media server either based on TC or AE to do this kind of thing.
    AC

  • IPhone 4S wifi goes on and off repeatedly on it's own/other apple products doing the same

    Okay so I have WiFi problems and I can't seem to find anybody with the same problem as me. I've read many WiFi problems with iOS 6 on Apple Discussion Forums and also Googled it and none of the problems I've seen fit my category.
    Infact, my problem is not only with iOS 6 and iPhone. I also have the same problem with my MacBook (2009, OSX Mountain Lion 10.8.2) and also my iPad 2 on iOS 6.0.1.
    I know it's not my WiFi, as there are also 3 Windows computers that work perfectly fine on it and I have tinkered with the wifi and all three of the Apple devices.
    Here is the problem: I can connect to WiFi but the WiFi constantly 'flutters'. It goes on and off continuously. (The actual wifi option doesnt go off, the wifi bars disappear and reappear constantly) I do seem to get WiFi at other people's houses but not all.
    Note it's not just cosmetic, it actually stops my connection. Also, I've not updated to iOS 6.0.1 on my iPhone, I see no reason to at this point. It didn't fix the problem on the iPad and there are no WiFi fixes for the iPhone 4S in the iOS notes.
    This is something that I've dealt with since iOS 6 arrived. It's very aggrivating.
    Other problem: This one involves my MacBook and not my iOS devices. My MacBook doesn't seem to like certain WiFi connection either. (Including my home networks) It will connect to most open networks with no security options set, but does not connect to WPA2 Networks. It says "Could not join "NetWorkName" A connection time out occured." Also used Network Utility & Wifi Diagnostics, both useless to me for this problem. But the WiFi Scanner in Network Utility did show me that my home networks are infact working. Just that this particular computer wont connect to it (Unlike every other computer in the house)
    If anyone else is having this issue or has insight on the issue please let me know and if you have a fix or an idea of what might fix it, I'll give it a try, if I can and if I haven't already attempted it.

    Lol you're going to love this... the one reason I wouldn't upgrade iOS on my iPhone was the exact thing that was holding my wifi back? I just feel stubborn now. Anyway. Thank you brandon, for atleast attempting to help.
    UPDATE: After a while of hard headedness, I updated to iOS 6.0.1 and my wifi on my iPhone is working like a charm.
    Weirdly, I'm not sure it was the iOS update that changed things, as my MacBook is actually connecting perfectly aswell?
    Still no clue with the iPad. But no biggy. This is a huge change and one that I can definitely cope with.
    (Now watch it just be my router making me look like a fool.) Because I also restarted it about an hour ago. (Which I have done numerous times in the past months.)
    So I don't know what's going on but whatever it is, I'm happy with it right now. I will hope that it doesn't break down again after I post this.
    For anyone that might run into this problem later on, update your phone. >.< New lesson learnt.

  • HT4623 iPhone apple logo goes on and off and is unresponsive

    iPhone apple logo goes on and off and is unresponsive

    It needs to be dried out. Stop using it.. don't turn it on. Put it in a zip lock bag with some rice or one of those packets of dessicant for a day or two. That might do it.
    i
    (And stop taking it into the sauna... or swimming)

  • Msi gt660 speaker goes on and off

    Hi
    After my old MSI GT660 could not be repaired, i recieved a new unit, but with a different screen. However, less than a week later, the left speaker goes on and off, no matter if it is playing a video, music or podcasts. And the right speaker sounds bad, when the left speaker isn't working (like something is covering it). But when the left speaker is on again, it sounds good. It has been on and off 4 times now.
    Any ideas?

     djmx,
    Stop the use of foul language disguised or not.
                  >> Please read and comply with the Forum Rules <<
     Edit: How did you flash BIOS, did you use the forum tool or some other method?

  • IPod charger is broken, it goes on and off every time it moves, what's wrong?

    My iPod charger is broken. My IPod 5 is fine, but the lightning cable may seem to be bent or just broken, it could be the wires but I'm not so sure.
    Every time it moves back and forth the charging goes on and off, I'm not so sure what is happening

    You should try another USB cable or get it serviced by Apple if a new cable does not work either.
    Apple - Support - Service Answer Center

  • Charger going on and off

    My charger has randomly stopped working right. the light goes on and off, usually off. if i press hard on the box part of the charger then the light will come back on. i'm assuming the connection isn't being made well, since it seems to increase with pressure.
    I know I'll probably just have to replace the charger. I've had this one for a year. I had the one before for 2/3 years. Is it typical for a charger to bite the dust after only a year or could this be a defect?

    The lights on the MagSafe adapters tend to die. What's more important is whether the adapter is charging/powering the computer. If so, you really have nothing to worry about.
    ~Lyssa

  • E63 GOING ON AND OFF

    I flashed my E63 but after flshing it could not work proberly,it keeps going on and off after every 5min.anybody who can help me.

    That's not a known issue. For starters, I would try and reflash the phone to eliminate the possbility that the first flas was bad. Take out the SIM card first and any memory cards you might have in it. Hopefully, it will remain on long enough for the update to start. If that doesn't work or you can't get the phone to stay on lng enough, try a reset. Here's a link to that discussion:
     /discussions/board/message?board.id=communicators&message.id=43316&query.id=1042038#M43316
    If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

  • The lights under my keys keep going on and off far too often ... Is there any particular reason for this or should I take it in for a service or what?

    The lights under the keys keep going on and off too much for my liking is there a particular reason for this or is there a problem with it ?

    System Preferences > Keyboard > Keyboard
    Turn off when computer is not  used for:
    Increase the time interval.

  • Ipad 4 while on charger flickers and goes on and off

    Just bought a refurbished Ipad 4 ( Netherlands ) and I did the update to IOS 8.
    Installed my apps and all and I put it on the charger ( original ).
    Opened an app, and screen goes on and off. Even went out after I tried again.
    Have tried to reset the tablet and started again with my account, but problem remains.
    What seems to be the problem? Can anybody help me with this issue?
    Thanks,
    Ik heb net een Ipad 4 refurbished gekocht. Heb de update naar ios 8 gedaan.
    Mijn apps erop gezet en toen moest hij aan de lader ( originele ) .
    Denk ga tijdens het opladen mijn apps openen en bekijken, maar op dat moment terwijl ik in een app zit gaat mijn scherm aan en uit. Dus app afgesloten en weer opnieuw geprobeerd. Gaat weer knipperen en start zichzelf weer op.
    Heb de ipad weer gereset in de hoop dat hij het dan weer gaat doen, maar het probleem blijf.
    Wat kan het probleem zijn? Iemand een oplossing?
    Bedankt

    Stop using it
    Take it to Apple and ask them to check it out

  • Message alert sound goes on and off?? but there is NO message?

    message alert sound goes on and off? but there is no message.  I just connected with FB, not sure if that's the reason, as there are no contacts showing? 

    U44M1P2003 - Update 12.1 installation errors | Photoshop Elements, Premiere Elements :
    http://helpx.adobe.com/photoshop-elements/kb/elements-12-1-update-error.html

Maybe you are looking for

  • Benefits of using SAP CAR compared to SAP BW on HANA

    Hi I' like to understand the benefits of using SAP Customer Activity Repository. How is it better than SAP BW on HANA? What extra functions does the customer get?

  • Iphoto'08 (version 7.1.5)

    i have mac OS X version 10.7.5 (processor 2.16 GHz Intel Core 2 Duo), l would like to connect my iphoto'08 (version 7.1.5) to my icloud account. how do l do this?

  • Can't Adjust Brightness in Windows 7

    I recentlly installed win 7 rc on my G530 and i cannot adjust the brightness anymore. i download the hotkey features driver which now allows me to adjust the volume and everything except screen brightness...is there a specific driver i have to downlo

  • Make Net Value Field at item level Editable in Sales Order

    Hi All pricing in our system are manual . So the client wants to change the Net Value Field in Credit and Debit Memo Request to be Editable ( Currently it is not modifiable) Plz suggest how to g about it. Do i need to use Userexit_ Field_ Modificatio

  • Change in material prices- very urgent

    Dear Gurus We have a very urgent issue to be resolved, we have a situation where in we are finding a huge difference in the inventories posted in SAP to that of the legacy data for a particular month(JUNE) these inventories where first initially uplo